Search

We present self-assembly routes of metamagnetic FeRh nanoisland arrays using sputter deposition processing. Controlling the growth parameters and epitaxy allows tuning the size and shape of the FeRh nanoislands. While the phase transition between antiferromagnetic and ferromagnetic order is largely suppressed in nanoislands formed on oxide substrates via thermodynamic nucleation, we find that metamagnetism is largely preserved in nanomagnet arrays formed through solid-state dewetting. This behavior is strongly dependent on the resulting crystal faceting of the nanoislands, which is characteristic of each assembly route. Comparing the calculated surface energies for each magnetic phase of the nanoislands reveals that metamagnetism can be suppressed or allowed by specific geometrical configurations of the facets. Furthermore, we find that the spatial confinement leads to very pronounced supercooling and the absence of phase separation in the nanoislands. Finally, the supported nanomagnets are chemically etched away from the substrates to inspect the phase transition properties of self-standing nanoparticles. We demonstrate that solid-state dewetting is a feasible and scalable way to obtain supported and free-standing FeRh nanomagnets with preserved metamagnetism., Comment: 28 pages, 7 figures, 1 table

Magnonics is a prospective beyond CMOS technology which uses magnons, the quanta of spin waves, for low-power information processing. Many magnonic concepts and devices were recently demonstrated at macro- and microscale, and now these concepts need to be realized at nanoscale. Brillouin light scattering spectroscopy and microscopy (BLS) has become a standard technique for spin wave visualization and characterization, and enabled many pioneering magnonic experiments. However, due to its fundamental limit in maximum detectable magnon momentum, the conventional BLS cannot be used to detect nanoscale spin waves. Here we show that optically induced Mie resonances in dielectric nanoparticles can be used to extend the range of accessible spin wave wavevectors beyond the BLS fundamental limit. The method is universal and can be used in many magnonic experiments dealing with thermally excited as well as coherently excited high-momentum, short-wavelength spin waves. This discovery significantly extends the usability and relevance of the BLS technique for nanoscale magnonic research.

We compare two transmission electron microscopy (TEM) based techniques that can provide highly spatially resolved quantitative measurements of magnetic induction fields at high sensitivity. To this end, the magnetic induction of a ferromagnetic NiFe nanowire has been measured and compared to micromagnetic modelling. State-of-the-art electron holography has been performed using the averaging of large series of holograms to improve the sensitivity of the measurements. These results are then compared those obtained from pixelated (or 4D) scanning transmission electron microscopy (STEM). This emerging technique uses a pixelated detector to image the local diffraction patterns as the beam is scanned over the sample. For each diffraction pattern, the deflection of the beam is measured and converted into magnetic induction, while scanning the beam allows to build a map. Aberration corrected Lorentz (field-free) configurations of the TEM and STEM were used for an improved spatial resolution. We show that the pixelated STEM approach, even when performed using an old generation of charge-coupled device camera, provides better sensitivity at the expense of spatial resolution. A more general comparison of the two techniques is given.

Spin waves have the potential to be used as a new platform for data transfer and processing as they can reach wavelengths in the nanometer range and frequencies in the terahertz range. To realize a spin-wave device, it is essential to be able to manipulate the amplitude as well as the phase of spin waves. Several theoretical and recently also experimental works have shown that the spin-wave phase can be manipulated by the transmission through a domain wall (DW). Here, we study propagation of spin waves through a DW by means of micro-focused Brillouin light scattering microscopy ($\mu$BLS). The acquired 2D spin-wave intensity maps reveal that spin-wave transmission through a N\'eel DW is influenced by a topologically enforced circular Bloch line in the DW center and that the propagation regime depends on the spin-wave frequency. In the first regime, two spin-wave beams propagating around the circular Bloch line are formed, whereas in the second regime, spin waves propagate in a single central beam through the circular Bloch line. Phase-resolved $\mu$BLS measurements reveal a phase shift upon transmission through the domain wall for both regimes. Micromagnetic modelling of the transmitted spin waves unveils a distortion of their phase fronts which needs to be taken into account when interpreting the measurements and designing potential devices. Moreover, we show, by means of micromagnetic simulations, that an external magnetic field can be used to move the circular Bloch line within the DW and to manipulate spin-wave propagation., Comment: 5 pages, 4 figures

We propose a review of the current knowledge about the synthesis, magnetic properties and applications of magnetic cylindrical nanowires and nanotubes. By "nano" we consider diameters reasonably smaller than a micrometer. At this scale, comparable to micromagnetic and transport length scales, novel properties appear. At the same time, this makes the underlying physics easier to understand due to the limiter number of degrees of freedom involved. The three-dimensional nature and the curvature of these objects contribute also to their specific properties, compared to patterns flat elements. While the topic of nanowires and later nanotubes started now decades ago, it is nevertheless flourishing, thanks to the progress of synthesis, theory and characterization tools. These give access to ever more complex and thus functional structures, and also shifting the focus from material-type measurements of large assemblies, to single-object investigations. We first provide an overview of common fabrication methods yielding nanowires, nanotubes and structures engineered in geometry~(change in diameter, shape) or material (segments, core-shell structures), shape or core-shell. We then review their magnetic properties: global measurements, magnetization states and switching, single domain wall statics and dynamics, and spin waves. For each aspect, both theory and experiments are surveyed. We also mention standard characterization techniques useful for these. We finally mention emerging applications of magnetic nanowires and nanotubes, along with the foreseen perspectives in the topic., Comment: Review, 124 pages, 23 figures, 496 references. To appear as a chapter in the Handbook of Magnetic Materials volume 27 (Elsevier). Comments are welcome to improve the manuscript

We establish a method to produce cylindrical magnetic nanowires displaying several segments, with a large versatility in terms of segment diameter and length. It is based on electroplating in alumina templates, the latter being prepared by several steps of anodization, wet etching and atomic layer deposition to produce, widen or shrink pores, respectively. We propose an analytical model to analyze the in-plane and out-of-plane magnetization loops of dense assemblies of multisegmented wires. The model considers inter-wires dipolar fields, end-domain curling and predicts the switching field of individual wires with no adjustable parameter. Its ingredients are crucial to extract reliable parameters from the fitting of loops, such as magnetization or the porosity of the array., Comment: 25 pages, 13 figures, original research article

We report the imaging of magnetic domains in ferromagnetic CoNiB nanotubes with very long aspect ratio, fabricated by electroless plating. While axial magnetization is expected for long tubes made of soft magnetic materials, we evidence series of azimuthal domains. We tentatively explain these by the interplay of anisotropic strain and/or grain size, with magneto-elasticity and/or anisotropic interfacial magnetic anisotropy. This material could be interesting for dense data storage, as well as curvature-induced magnetic phenomena such as the non-reciprocity of spin-wave propagation., Comment: Focus only on azimuthal domains, information on domain walls (part of v1) removed - title, abstract and discussion changed accordingly, tubular racetracks scheme removed; new references, figures. Submission to SciPost (reformatted, new abstract, DOI added to references). Enhanced discussion of anisotropy, disagreement of synchrotron data and magnetometry rectified, new MOKE data added

Using focused electron-beam-induced deposition (FEBID), we fabricate vertical, platinum-coated cobalt nanowires with a controlled three-dimensional structure. The latter is engineered to feature bends along the height: these are used as pinning sites for domain walls, the presence of which we investigate using X-ray Magnetic Circular Dichroism (XMCD) coupled to PhotoEmission Electron Microscopy (PEEM). The vertical geometry of our sample combined with the low incidence of the X-ray beam produce an extended wire shadow which we use to recover the wire's magnetic configuration. In this transmission configuration, the whole sample volume is probed, thus circumventing the limitation of PEEM to surfaces. This article reports on the first study of magnetic nanostructures standing perpendicular to the substrate with XMCD-PEEM. The use of this technique in shadow mode enabled us to confirm the presence of a domain wall (DW) without direct imaging of the nanowire., Comment: 5 figures with colour, 9 pages

We probe magnetic domain walls in cylindrical soft magnetic nanowires using electron holography. We detail the modelling of expected contrast for both transverse and Bloch point domain walls and provide comparison with experimental observations performed on NiCo nanowires, involving also both magnetic and electrostatic contribution to the electron holography map. This allows the fast determination of the domain wall type without the need for uneasy and time-consuming experimental removal of the electrostatic contribution. Finally, we describe and implement a new efficient algorithm for calculating the magnetic contrast., Comment: 3 pages, 2 figures