Search

Key Takeaways: Many sensory methods are standardized, and new ones are being developed, to assess the aesthetic quality of source water and treated drinking water. In Standard Methods for the Examination of Water and Wastewater, sections 2110 and 2150 have been updated, and section 2150D, "Attribute Rating Test" (ART), has been added. ART is a technique for numerically rating water samples by sensory evaluation for the presence of taste and odor compounds. Sensory tests—screening panelists for their ability to smell compounds—should be part of a utility's sensory program. [ABSTRACT FROM AUTHOR]

Endangered trout populations can be monitored with a variety of methods, the selection of which should consider social constraints and environmental variables known to affect method effectiveness. Here, we confront the effectiveness of four monitoring methods (removal with electrofishing, ELE; underwater camera survey, UCS; streamside visual survey, SVS; visual surveys with angling, VSA) to estimate the relative abundance of three populations of the endangered Mediterranean brown trout. The trout counts obtained via different methods were well correlated (r = 0.65–0.72), providing a coherent description of the relative pool abundance across the methods. However, the methods were differently affected by environmental variables, depending on the age classes of trout. Specifically, the adult and subadult counts provided by ELE and VSA were negatively and positively affected by the maximum pool depth, respectively; adult and subadult counts of VSA and the SVS were positively affected by pool area; the juvenile counts provided by the UCS were positively affected by pool shade and negatively affected by water turbidity; juvenile counts provided by VSA were positively affected by shade. Variables such as pool depth, area, shading, water turbidity and proportion of age classes can be hardly controlled in monitoring programs, and their bias could be modelled. Different sampling methods provided similar information about relative abundance and appeared equivalent. While ELE could be selected to collect samples and biometric data, monitoring relative abundance with the UCS, VSA, and SVS appears more suited and can also involve citizen scientists. [ABSTRACT FROM AUTHOR]

The ASTM International standard test method for freshwater mussels (E2455‐13) recommends 4‐week toxicity testing with juveniles to evaluate chronic effects on survival and growth. However, concerns remain that the method may not adequately address the sensitivity of mussels to longer term exposures (>4 weeks), particularly in relation to potential reproductive impairments. No standard method directly evaluates toxicant effects on mussel reproduction. The objectives of the present study were to (1) evaluate toxicity endpoints related to reproduction in fatmucket (Lampsilis siliquoidea) using two common reference toxicants, potassium chloride (KCl) and nickel (Ni); (2) evaluate the survival and growth of juvenile fatmucket in standard 4‐week and longer term (12‐week) KCl and Ni tests following a method refined from the standard method; and (3) compare the sensitivity of the reproductive endpoints with the endpoints obtained from the juvenile mussel tests. Reproductive toxicity tests were conducted by first exposing female fatmucket brooding mature larvae (glochidia) to five test concentrations of KCl and Ni for 6 weeks. Subsamples of the glochidia were then removed from the adults to determine three reproductive endpoints: (1) the viability of brooded glochidia; (2) the viability of free glochidia in a 24‐h exposure to the same toxicant concentrations as their mother; and (3) the success of glochidia parasitism on host fish. Mean viability of brooded glochidia was significantly reduced in the high KCl concentration (26 mg K/L) relative to the control, with a 20% effect concentration (EC20) of 14 mg K/L, but there were no significant differences between the control and any Ni treatment (EC20 > 95 µg Ni/L). The EC20s for viability of free glochidia after the additional 24‐h exposure and parasitism success were similar to the EC20s of brooded glochidia. The EC20s based on the most sensitive biomass endpoint in the 4‐week juvenile tests were 15 mg K/L and 91 µg Ni/L, similar to or greater than the EC20s from the reproductive KCl and Ni tests, respectively. When exposure duration in the juvenile tests was extended from 4 to 12 weeks, the EC20s decreased by more than 50% in the KCl test but by only 8% in the Ni test. Overall, these results indicate that a standard 4‐week test with juvenile mussels can prove effective for estimating effects in chronic exposures with different life stages although a longer term 12‐week exposure with juvenile mussels may reveal higher sensitivity of mussels to some toxicants, such as KCl. Environ Toxicol Chem 2024;43:1097–1111. © 2024 SETAC. This article has been contributed to by U.S. Government employees and their work is in the public domain in the USA. [ABSTRACT FROM AUTHOR]

In the process of conducting this research, 110 studies on monitoring nitrate content in agricultural products produced in Iran were gathered. These studies were published until March 20, 2023. The collected studies underwent evaluation for methodology, quality control, and quality assurance of results and were then assessed based on standard research criteria. The evaluation of the study's methodology revealed that only 27.3% of the studies adhered to standard methods for sampling, storage, and sample transfer. In 15.5% of the studies, the method of preparation and extraction followed standard procedures. Additionally, in 30% of the studies, the nitrate measurement method was conducted according to established standard procedures. The evaluation of quality control in the studies showed that only 20.9% reported some indicators of quality control and assurance. The assessment of nitrate concentration in agricultural products revealed the weighted mean concentrations of nitrate (mg kg-1 fresh weight) as follows: potato 98.7, cucumber 120.9, tomato 40.7, onion 39.6, watermelon 19.9, melon 62.9, carrot 151.1, eggplant 235.2, peppers 329, other root and tuber vegetables 542.4, lettuce 907.7, spinach 995.4, celery 1093.4, fresh edible legumes 37.7, parsley 596.5, cabbages 414.7, other leafy vegetables 635.6, apple 32.4, and orange 37.2. The findings of the present research reveal that the mean nitrate concentrations in Iran’s agricultural products fall below the maximum permissible levels outlined by both the Iranian national standard and international standards. As a result, it can be generally concluded that there is no significant cause for concern regarding residual nitrate concentration in Iran’s agricultural products. [ABSTRACT FROM AUTHOR]

Endangered trout populations can be monitored with a variety of methods, the selection of which should consider social constraints and environmental variables known to affect method effectiveness. Here, we confront the effectiveness of four monitoring methods (removal with electrofishing, ELE; underwater camera survey, UCS; streamside visual survey, SVS; visual surveys with angling, VSA) to estimate the relative abundance of three populations of the endangered Mediterranean brown trout. The trout counts obtained via different methods were well correlated (r = 0.65–0.72), providing a coherent description of the relative pool abundance across the methods. However, the methods were differently affected by environmental variables, depending on the age classes of trout. Specifically, the adult and subadult counts provided by ELE and VSA were negatively and positively affected by the maximum pool depth, respectively; adult and subadult counts of VSA and the SVS were positively affected by pool area; the juvenile counts provided by the UCS were positively affected by pool shade and negatively affected by water turbidity; juvenile counts provided by VSA were positively affected by shade. Variables such as pool depth, area, shading, water turbidity and proportion of age classes can be hardly controlled in monitoring programs, and their bias could be modelled. Different sampling methods provided similar information about relative abundance and appeared equivalent. While ELE could be selected to collect samples and biometric data, monitoring relative abundance with the UCS, VSA, and SVS appears more suited and can also involve citizen scientists.

Since their introduction to North America in the 1980s, research to develop effective control tools for invasive mussels (Dreissena polymorpha and D. rostriformis bugensis) has been ongoing across various research institutions using a range of testing methods. Inconsistencies in experimental methods and reporting present challenges for comparing data, repeating experiments, and applying results. The Invasive Mussel Collaborative established the Toxicity Testing Work Group (TTWG) in 2019 to identify "best practices" and guide development of a standard framework for dreissenid mussel toxicity testing protocols. We reviewed the literature related to laboratory‐based dreissenid mussel toxicity tests and determined the degree to which standard guidelines have been used and their applicability to dreissenid mussel testing. We extracted detailed methodology from 99 studies from the peer‐reviewed and gray literature and conducted a separate analysis for studies using presettlement and postsettlement mussels. We identified specific components of methods and approaches that could be refined or standardized for dreissenid mussels. These components included species identification, collection methods, size/age class distinction, maintenance practices, testing criteria, sample size, response measures, reporting parameters, exposure methods, and mortality criteria. We consulted experts in the field of aquatic toxicology and dreissenid mussel biology on our proposed. The final recommendations contained in the present review are based on published standard guidelines, methods reported in the published and gray literature, and the expertise of TTWG members and an external panel. In addition, our review identifies research needs for dreissenid mussel testing including improved methods for early–life stage testing, comparative data on life stages and between dreissenid mussel species, inclusion of a reference toxicant, and additional testing of nontarget species (i.e., other aquatic organisms). Environ Toxicol Chem 2023;42:1649–1666. © 2023 His Majesty the King in Right of Canada. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC. Reproduced with the permission of the Minister of Environment and Climate Change Canada. This article has been contributed to by U.S. Government employees and their work is in the public domain in the USA. [ABSTRACT FROM AUTHOR]

Awareness of the need for surveillance of antimicrobial resistance (AMR) in water environments is growing, but there is uncertainty regarding appropriate monitoring targets. Adapting culture-based fecal indicator monitoring to include antibiotics in the media provides a potentially low-tech and accessible option, while quantitative polymerase chain reaction (qPCR) targeting key genes of interest provides a broad, quantitative measure across the microbial community. The purpose of this study was to compare findings obtained from the culture of cefotaxime-resistant (cefR) Escherichia coli with two qPCR methods for quantification of antibiotic resistance genes across wastewater, recycled water, and surface waters. The culture method was a modification of US EPA Method 1603 for E. coli, in which cefotaxime is included in the medium to capture cefR strains, while qPCR methods quantified sul1 and intI1. A common standard operating procedure for each target was applied to samples collected by six water utilities across the United States and processed by two laboratories. The methods performed consistently, and all three measures reflected the same overarching trends across water types. The qPCR detection of sul1 yielded the widest dynamic range of measurement as an AMR indicator (7-log versus 3.5-log for cefR E. coli), while intI1 was the most frequently detected target (99% versus 96.5% and 50.8% for sul1 and cefR E. coli, respectively). All methods produced comparable measurements between labs (p < 0.05, Kruskal–Wallis). Further study is needed to consider how relevant each measure is to capturing hot spots for the evolution and dissemination of AMR in the environment and as indicators of AMR-associated human health risk. [ABSTRACT FROM AUTHOR]

Propolis is a resinous beehive product with extraordinary bioactivity and chemical richness, linked with the botanical sources of the resin. The potential of this product keeps captivating the scientific community, conducting to continuous and growing research on plant sources, composition, or applications in agriculture, cosmetics, pharmacy, odontology, etc. In all cases, the quality assessment is a requirement and relies on methods to extract the bioactive substances from the raw propolis and quantify different components. Unfortunately, besides the absence of international quality requirements, there is also a lack of standardized analytical procedures, despite the presence of several methodologies with unknown reliability, often not comparable. To overcome the current status, the International Honey Commission established an inter-laboratory study, with propolis samples from around the globe, to harmonize analytical methods and evaluate their accuracy. A common set of protocols was matched between twelve laboratories from nine countries, for quantification of ash, wax, and balsamic content in raw propolis, and spectrophotometric evaluation of total phenolics, flavone/flavonol, and flavanone/dihydroflavonol in the extract. A total of 3428 results (97% valid data), were used to assess the methods' accuracy following ISO-5725 guidelines. The within-laboratory precision, revealed good agreement levels for the majority of the methods, with relative variance below 5%. As expected, the between-laboratory variance increased, but, with exception of the flavanone method that revealed a clear lack of consistency, all the others maintained acceptable variability levels, below 30%. Because the performance of ultrasounds procedures was low, they cannot be recommended until further improvements are made. [ABSTRACT FROM AUTHOR]

The article presents an analytical review of the methods for determining the activity of water in food products. This is necessary in order to select among several methods the most suitable, which can be taken as a basis for further development of the methodology for determining water activity for non-smoking tobacco and nicotine-containing products.Water activity is an indirect indicator of microbiological contamination and is particularly important for tobacco and non-tobacco products consumed directly without burning. When water activity values are relatively high in Non-tobacco nicotine-containing products of oral type (NTNCPOT), microflora can develop. Non-tobacco nicotine-containing oral consumption products are actively marketed and are partially replacing traditional nicotine “consumption” methods. A distinctive feature of this product is its method of consumption, which is that as a result of consumption there is no process of inhaling tobacco smoke, which has a negative impact on the human body. On this basis, this product is a less dangerous alternative to smoking cigarettes. Since the products are so widespread, it is necessary to establish quality control. Water activity is not a standard indicator for controlling tobacco products, but since these products are intended for oral consumption, this indicator should begin to be defined as one of the most important for consumer safety. For non-smoking tobacco and nicotine-containing oral products, the CORESTA CRM88 method is the most appropriate. In order to develop a methodology for determining water activity and establishing the necessary values, further study of smokeless tobacco products and non-smokeless nicotine-containing oral products is needed.

This research paper is the result of observations made during tests according to various standards carried out on behalf of industry. The article presents diffusion coefficient values calculated according to the thermodynamic migration model for twenty different concrete mixes and some selected mixes of the codified approaches known as ASTM 1202, NT BUILD 443, NT BUILD 492, ASTM 1556. The method used here, according to the thermodynamic model of migration, allows determination of the value of the diffusion coefficient after short studies of the migration of chloride ions into concrete and was described in earlier works by one of the authors. Unfortunately, when using standard methods, the values of diffusion coefficients differ significantly from each other. In each concrete, diffusion tests were carried out in the conditions of long-term natural diffusion to verify the values determined by standard methods and according to the thermodynamic model of migration. The analysis conducted for this research paper reveals that the chloride permeability test method according to the standard ASTM C1202-97 has an almost 2.8-fold greater dispersion of the obtained results compared to the thermodynamic model of migration. It was observed that the standard NT BUILD 492 has a 3.8-fold dispersion of results compared to the method with the thermodynamic model of migration. The most time-consuming method is the standard method NT BUILD 443. The largest 3.5-fold dispersion of values concerning the reference value are observed in that method. Moreover, a method based on a thermodynamic migration model seems to be the best option of all analyzed methods. It is a quite quick, but laborious, method that should be tested for a larger number of concrete mixes. A great advantage of this method is that it is promising for a wide range of concrete mixtures, both plain concrete and concrete with various additives and admixtures, as well as high-performance concrete. [ABSTRACT FROM AUTHOR]

The Elbasani region is characterized by its strong hydrodynamics regime, which comes from the powerful movements of underground water combined with many resources; therefore, the area has geothermal potential, and is one of the most popularly used in our country. This area has a number of sources, located in the form of a chain in the sector between Llixha and Hidrajt, and constitutes a thermomineral basin with a stable discharge and high temperature, at the upper limits of low enthalpy, reaching above 60 °C. The current average flow of thermal water is about 15–18 L/s and temperatures vary from 55 to 65 °C. It is estimated that these resources have specific reserves of 39.6 GJ/m2 and the potential to install 2760 kW of power. To evaluate their basic physico-chemical parameters and nutrients, water samples were taken throughout 2022 at five monitoring stations, covering the entire aquifer. Stiff diagrams have been used to explain the similarities between the physico-chemical properties.

The San Francisco Public Utilities Commission needed a simple yet effective method for screening and training sensory analysts to detect geosmin in drinking water. The result was a modified version of the agency's triangle test, using sets of 40‐mL vials for each participant. [ABSTRACT FROM AUTHOR]

In the context of the discussion on an amendment of the Federal Hunting Act, the Federal Institute for Risk Assessment (BfR) in Germany has dealt with scientific principles that enable an assessment of the introduction of bullet fragments into game meat. Until now, neither standardized terms nor definitions nor standardized procedures for quantifying the effects of the introduction of corpuscular bullet fragments were available for a health assessment. With the participation of international experts, a concept was developed that could be used to test hunting rifle bullets regarding their effectiveness potential [The term effectiveness potential (in German: Wirkpotenzial) describes more than the term "effectiveness" (in German: Wirksamkeit)] and entry of bullet fragments into game or game meat. The term "killing effect" newly introduced into the discussion in the context of the efforts to amend the Federal Hunting Act was not supported by the experts, since "killing" cannot be simulated and standardized. Other basic terms and definitions were formulated and/or interpreted. A distinction must be made between the effect of a bullet on biological tissue, the (optimal) effect of the bullet when shot in a manner appropriate for hunting, the impact on the hunted game when hit in a suitable location and the effect of the bullet, described as physical effectiveness potential. In principle, the following applies: The effectiveness potential of a bullet can be simulated and thus evaluated in test simulants/test media. Therefore, it is possible to describe hunting rifle bullets based on qualitative and quantitative parameters as well as concerning their physicochemical properties. Their effectiveness potential in game meat can thus be adequately assessed, both by the hunter and with a view to the scientific issues related to consumer health protection strategies for minimizing bullet fragments in game meat. Essential parameters required for a test procedure have been compiled in a product profile for hunting rifle bullets used to kill food-producing game species. [ABSTRACT FROM AUTHOR]

Awareness of the need for surveillance of antimicrobial resistance (AMR) in water environments is growing, but there is uncertainty regarding appropriate monitoring targets. Adapting culture-based fecal indicator monitoring to include antibiotics in the media provides a potentially low-tech and accessible option, while quantitative polymerase chain reaction (qPCR) targeting key genes of interest provides a broad, quantitative measure across the microbial community. The purpose of this study was to compare findings obtained from the culture of cefotaxime-resistant (cefR) Escherichia coli with two qPCR methods for quantification of antibiotic resistance genes across wastewater, recycled water, and surface waters. The culture method was a modification of US EPA Method 1603 for E. coli, in which cefotaxime is included in the medium to capture cefR strains, while qPCR methods quantified sul1 and intI1. A common standard operating procedure for each target was applied to samples collected by six water utilities across the United States and processed by two laboratories. The methods performed consistently, and all three measures reflected the same overarching trends across water types. The qPCR detection of sul1 yielded the widest dynamic range of measurement as an AMR indicator (7-log versus 3.5-log for cefR E. coli), while intI1 was the most frequently detected target (99% versus 96.5% and 50.8% for sul1 and cefR E. coli, respectively). All methods produced comparable measurements between labs (p < 0.05, Kruskal–Wallis). Further study is needed to consider how relevant each measure is to capturing hot spots for the evolution and dissemination of AMR in the environment and as indicators of AMR-associated human health risk.

This research paper is the result of observations made during tests according to various standards carried out on behalf of industry. The article presents diffusion coefficient values calculated according to the thermodynamic migration model for twenty different concrete mixes and some selected mixes of the codified approaches known as ASTM 1202, NT BUILD 443, NT BUILD 492, ASTM 1556. The method used here, according to the thermodynamic model of migration, allows determination of the value of the diffusion coefficient after short studies of the migration of chloride ions into concrete and was described in earlier works by one of the authors. Unfortunately, when using standard methods, the values of diffusion coefficients differ significantly from each other. In each concrete, diffusion tests were carried out in the conditions of long-term natural diffusion to verify the values determined by standard methods and according to the thermodynamic model of migration. The analysis conducted for this research paper reveals that the chloride permeability test method according to the standard ASTM C1202-97 has an almost 2.8-fold greater dispersion of the obtained results compared to the thermodynamic model of migration. It was observed that the standard NT BUILD 492 has a 3.8-fold dispersion of results compared to the method with the thermodynamic model of migration. The most time-consuming method is the standard method NT BUILD 443. The largest 3.5-fold dispersion of values concerning the reference value are observed in that method. Moreover, a method based on a thermodynamic migration model seems to be the best option of all analyzed methods. It is a quite quick, but laborious, method that should be tested for a larger number of concrete mixes. A great advantage of this method is that it is promising for a wide range of concrete mixtures, both plain concrete and concrete with various additives and admixtures, as well as high-performance concrete.

The precise determination of the colour of oils and fats is a common and important parameter for the production of oils, fats, margarine, and mayonnaise. A new method has been developed and tested in order to improve reliability and reproducibility of the results. It is based on colour values, which describe the colour in a 3D space as defined by the International Commission on Illumination (CIE) as CIE 1976 (L*a*b*). The precision data obtained from a collaborative method validation test show significant improved repeatability with relative coefficients of variation of repeatability between 0.1 and 1.7% except for a very dark pumpkin seed oil (2.7%). The coefficients of variation of reproducibility range from 0.7 to 13.9 %. The signals of very intense colored samples might exceed the linear range of some measuring instruments. Solutions of colour standards tartrazine and Ponceau 4R as pure (>99 %) and non‐toxic substances are tested for laboratory calibration covering a colour space from CIE 1976 L* (63–99), a* (−23–67), and b* (0.5–119). A storage experiment with these standard substances is carried out and the results show improved stability over a period of 80 days compared to bromothymol blue and iodine standard solutions. Practical Applications: The results of this study show the suitability of an analysis method for the determination of the colour of oils and fats using the 3D CIE 1976 colour space as an alternative to the common Lovibond system of red and yellow colour values. As the international harmonized approach of the CIE 1976 colour space is widely accepted for the communication of precise colour description and differences between two different colors in many applications all over the world, this will be also an advantage for the communication and specification of colors in the oils and fats industry, market, and trade. In addition, the use of easy to prepare colour standard solutions enables every laboratory to check the suitability of their colour measuring device in a convenient way. [ABSTRACT FROM AUTHOR]

The advances of biomedicine include the new technologies, diagnosis and treatment techniques, as well as the practical use of new types of biological targets, in particular, nucleic acids. Genomic deoxyribonucleic acid (DNA), extracellular DNA (exDNA) and microbiome DNA obtained from different types of samples (tissues, blood and its derivatives, feces, etc.) are used as objects of genetic research. The use of new technologies for DNA analysis required the development of standardized methods for processing biological samples in order to obtain high-quality DNA samples. The research uses various methods for collecting, preparing samples and storing various DNA-containing biomaterials and isolated DNA, as well as methods for assessing the quality of samples and biobank standards. It is obvious that the use of uniform standards will allow large-scale genetic research on the basis of biobanks and research laboratories. Specialists from professional organizations such as International Society for Biological and Environmental Repositories (ISBER), Biobanking and BioMolecular Resources Research Infrastructure-European Research Infrastructure Consortium (BBMRI-ERIC), European, Middle Eastern & African Society for Biopreservationa and Biobanking (ESBB) and the Russian National Association of Biobanks and Biobanking Professionals.

Copyright of Tecnología y Ciencias del Agua is the property of Instituto Mexicano de Tecnologia del Agua (IMTA) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Sterilization methods for individuals and facilities are extremely important to enable human beings to continue the basic tasks of life and to enable safe and continuous interaction of citizens in society when outbreaks of viral pandemics such as the coronavirus. Sterilization methods, their availability in gatherings, and the efficiency of their work are among the important means to contain the spread of viruses and epidemics and enable societies to practice their activities almost naturally. Despite the effective solutions given by traditional methods of surface disinfection, modern nanotechnology has proven to be an emergent innovation to protect against viruses. On this note, recent scientific breakthroughs have highlighted the ability of nanospray technology to attach to air atoms in terms of size and time-period of existence as a sterilizer for renewed air in large areas for human gatherings. Despite the ability of this method to control the outbreak of infections, the mutation of bactericidal mechanisms presents a great issue for scientists. In recent years, science has explored a more performant approach and techniques based on a surface-resistance concept. The most emergent is the self-defensive antimicrobial known as the self-disinfection surface. It consists of the creation of a bacteria cell wall to resist the adhesion of bacteria or to kill bacteria by chemical or physical changes. Besides, plasma-mediated virus inactivation was shown as a clean, effective, and human healthy solution for surface disinfection. The purpose of this article is to deepen the discussion on the threat of traditional methods of surface disinfection and to assess the state of the art and potential solutions using emergent nanotechnology. [ABSTRACT FROM AUTHOR]

Abstract Densification has been carried out for many years, mostly in biomass processing, animal feed production, and pharmaceutical industries. During the years, researchers and engineers attempted to improve the product quality and minimize the production costs. The most important quality parameters of solid bio-materials are the compressive strength, abrasion resistance, impact resistance, moisture adsorption, and density. Various studies used different standard and non-standard methods to characterize these quality parameters. The objective of this paper is twofold: (1) to investigate the state-of-the-art methods and devices used in the quality assessment of densified bio-materials, including a comparison between non-standard and standard methods. (2) to discuss the effect of different factors on the properties of densified bio-materials using an integrated approach. The results show a lack of standard methods for the quality assessment of bio-materials and therefore, there is an emerging need for development of dedicated standards for bio-materials. Moreover, the use of dissimilar methods and devices in the quality assessment of bio-materials gives risk to uncertainties about the effect of different factors on the product quality. Highlights • Methods to measure quality parameters of densified bio-materials are discussed. • Factors affecting the quality parameters of bio-materials are discussed. • There is a need for dedicated standards for densified bio-materials. [ABSTRACT FROM AUTHOR]

Total Suspended Solids (TSS) was an important parameter used to control biomass in an aeration tank during the activated sludge process also known as Mixed Liquor Suspended Solids (MLSS). The weighed standard glass-fiber filter and the residue retained on the filter are dried to a constant weight at 103 to 105°C. There were major steps in a standard method, which take time to analyze. Therefore, microwave method was an attractive technique because rapid determination of total suspended solids. This comparative study was made on the analysis of total suspended solids between the use of microwave and standard method of American Public Health Association, American Water Works Association, and Water Environment Federation (APHA, AWWA & WEF). It was conducted to examine the appropriate condition of microwave power 800-watt at two levels including medium-high and high levels at 10, 15 and 20 minutes. Synthetic wastewater was prepared by Cellulose power of thin layer chromatography at concentrations 100 mg/l. The result show on that the optimum condition was using high level at 10 minutes. Mean of total suspended solids was at 97.39 mg/L. The sample of wastewater was collected from Conventional Activated Sludge, CAS of Sakon Nakhon Hospital. After comparison, it was found that total suspended solids with microwave and standard method had an average concentration at 156.2 and 150.4 mg/L, respectively. There was no significant difference of total suspended solids from the two methods at a 95% confidence level. [ABSTRACT FROM AUTHOR]

Sterilization methods for individuals and facilities are extremely important to enable human beings to continue the basic tasks of life and to enable safe and continuous interaction of citizens in society when outbreaks of viral pandemics such as the coronavirus. Sterilization methods, their availability in gatherings, and the efficiency of their work are among the important means to contain the spread of viruses and epidemics and enable societies to practice their activities almost naturally. Despite the effective solutions given by traditional methods of surface disinfection, modern nanotechnology has proven to be an emergent innovation to protect against viruses. On this note, recent scientific breakthroughs have highlighted the ability of nanospray technology to attach to air atoms in terms of size and time-period of existence as a sterilizer for renewed air in large areas for human gatherings. Despite the ability of this method to control the outbreak of infections, the mutation of bactericidal mechanisms presents a great issue for scientists. In recent years, science has explored a more performant approach and techniques based on a surface-resistance concept. The most emergent is the self-defensive antimicrobial known as the self-disinfection surface. It consists of the creation of a bacteria cell wall to resist the adhesion of bacteria or to kill bacteria by chemical or physical changes. Besides, plasma-mediated virus inactivation was shown as a clean, effective, and human healthy solution for surface disinfection. The purpose of this article is to deepen the discussion on the threat of traditional methods of surface disinfection and to assess the state of the art and potential solutions using emergent nanotechnology.

Humic products have been used in cropland agriculture for several decades, but lack of widespread credibility has restricted their use to small proportions of farmers. To improve the credibility of humic products, we identify four knowledge gaps and propose pathways of future action to close these gaps. First, while the capacity of humic products to improve plant growth has been proven in greenhouse and growth chambers, more such work is needed in field conditions, especially to determine the modifying effects on humic product efficacy of environmental and management factors, including crop type, annual weather patterns, soil type, and fertility management. Many of the published field studies fail to address any of these factors. Second, full acceptance of humic products by the research community may first require a mechanistic explanation for plant responses to humic products. Some research groups are exploring plant-based mechanisms, but almost entirely in controlled conditions, not in field conditions. Industry often attributes yield responses to enhancement of soil nutrient availability without citing adequate evidence. Microbial-based explanations are also possible. Third, consumer trust in available humic products would be strengthened through industry-wide measures for quality control of humic product production and sale, including standard procedures for measuring their humic and fulvic acid contents and rapid bio-assays for distinguishing effective products from inert frauds. Finally, humic products are widely presumed to promote root growth, which offers the potential to increase soil C inputs and thereby improve soil health. Yet virtually, no such evidence has been presented, in part due to the absence of long-term field trials. Humic product companies in North America have organized a trade association to promote a more knowledge-based industry. To acquire a database that will support these objectives, we propose establishment of a global network of field sites that would measure crop responses to humic products across ranges of humic products, crop types, soil types, and climates. Plant and soil samples would be analyzed by cooperating specialists in advanced laboratories to identify mechanistic processes and benefits to both plant production and soil health. We believe the industry will indeed become more knowledge-based and the credibility of humic products will improve as (i) we learn more about their field efficacy across ranges of field conditions for improving crop yield and soil health, (ii) we gain further insights into possible mechanistic explanations, and (iii) the consumer gains the ability to discern genuine products from fraudulent materials. [ABSTRACT FROM AUTHOR]

In microbiological water quality testing, sample dechlorination with sodium thiosulfate is recommended to ensure that results accurately reflect the water quality at sample collection. Nevertheless, monitoring institutions in low-resource settings do not always dechlorinate samples, and there is limited research describing how this practice impacts drinking water quality results. The effect of dechlorination on indicator bacteria counts was evaluated by spiking laboratory water with five Escherichia coli (E. coli) concentrations (104-108 CFU/100 mL), chlorinating at six doses (0-0.6 mg/L), holding samples with and without sodium thiosulfate for 5-7 hours, and enumerating E. coli by membrane filtration with m-lauryl sulfate media. Additionally, sub-Saharan African water suppliers enumerated thermotolerant coliform by membrane filtration in paired chlorinated water samples collected with and without sodium thiosulfate. Across all E. coli and chlorine doses in the laboratory, and all field tests, samples held without sodium thiosulfate had lower bacteria counts (p <0.001). Additionally, chlorinated water supply samples held without sodium thiosulfate had an 87.5% false negative rate. Results indicate the importance of dechlorinating microbiological water quality samples, discarding data from chlorinated samples collected without dechlorination, and reinforcing dechlorination recommendations in resource-limited environments to improve water safety management. [ABSTRACT FROM AUTHOR]