Search

Light makes light work of fatty acids Photosynthetic organisms are notable for their ability to capture light energy and use it to power biosynthesis. Some algae have gone a step beyond photosynthesis and can use light to initiate enzymatic photodecarboxylation of fatty acids, producing long-chain hydrocarbons. To understand this transformation, Sorigué et al. brought to bear an array of structural, computational, and spectroscopic techniques and fully characterized the catalytic cycle of the enzyme. These experiments are consistent with a mechanism starting with electron transfer from the fatty acid to a photoexcited oxidized flavin cofactor. Decarboxylation yields an alkyl radical, which is then reduced by back electron transfer and protonation rather than hydrogen atom transfer. The wealth of experimental data explains how algae harness light energy to produce alka(e)nes and provides an appealing model system for understanding enzyme-catalyzed photochemistry more generally. Science , this issue p. eabd5687

Fatty acid photodecarboxylase (FAP) is one of the few enzymes that require light for their catalytic cycle (photoenzymes). FAP was first identified in the microalga Chlorella variabilis NC64A, and belongs to an algae-specific subgroup of the glucose–methanol–choline oxidoreductase family. While the FAP from C. variabilis and its Chlamydomonas reinhardtii homolog CrFAP have demonstrated in vitro activities, their activities and physiological functions have not been studied in vivo. Furthermore, the conservation of FAP activity beyond green microalgae remains hypothetical. Here, using a C. reinhardtii FAP knockout line (fap), we showed that CrFAP is responsible for the formation of 7-heptadecene, the only hydrocarbon of this alga. We further showed that CrFAP was predominantly membrane-associated and that >90% of 7-heptadecene was recovered in the thylakoid fraction. In the fap mutant, photosynthetic activity was not affected under standard growth conditions, but was reduced after cold acclimation when light intensity varied. A phylogenetic analysis that included sequences from Tara Ocean identified almost 200 putative FAPs and indicated that FAP was acquired early after primary endosymbiosis. Within Bikonta, FAP was retained in secondary photosynthetic endosymbiosis lineages but absent from those that lost the plastid. Characterization of recombinant FAPs from various algal genera (Nannochloropsis, Ectocarpus, Galdieria, Chondrus) provided experimental evidence that FAP photochemical activity was present in red and brown algae, and was not limited to unicellular species. These results thus indicate that FAP was conserved during the evolution of most algal lineages where photosynthesis was retained, and suggest that its function is linked to photosynthetic membranes.

Fatty Acid Photodecarboxylase (FAP) is a recently discovered photoenzyme that catalyzes the conversion of fatty acids into alkane and CO2 under light, with potential importance in green chemistry applications [1]. Its mechanism was still not fully understood and partly relied on a low-resolution crystal structure obtained from crystals with a twinning default [1]. Here, we present high-resolution crystal structures of FAP obtained in the dark and after light illumination at cryogenic temperatures (Figure 1). Combined with structural, computational, and spectroscopic techniques we are now able to provide a detailed reaction cycle of FAP. The reaction mechanism starts with an electron transfer from the fatty acid to a photoexcited oxidized flavin cofactor. Decarboxylation yields an alkyl radical, which is then reduced by back electron transfer and protonation rather than hydrogen atom transfer. Along with flavin reoxidation by the alkyl radical intermediate, a major fraction of the cleaved CO2 unexpectedly transforms in 100 ns, most likely into bicarbonate. This is orders of magnitude faster than in solution, which indicates a catalytic step. FT-IR, structural and functional studies on variants centered on two conserved active site residues (R451 and C432) showed that R451 is essential for substrate stabilization and proton transfer. Altogether this study provides a detailed characterization of this unique enzyme and reveals a striking and unanticipated mechanistic complexity [2].

Fatty acid photodecarboxylase (FAP) is one of the three enzymes that require light for their catalytic cycle (photoenzymes). FAP has been first identified in the green microalga Chlorella variabilis NC64A and belongs an algae-specific subgroup of the glucose-methanol-choline oxidoreductase family. While the FAP from Chlorella and its Chlamydomonas reinhardtii homolog CrFAP have demonstrated in vitro activity, their activity and physiological function have not been studied in vivo. Besides, the conservation of FAP activity beyond green microalgae remains hypothetical. Here, using a Chlamydomonas FAP knockout line (fap), we show that CrFAP is responsible for the formation of 7-heptadecene, the only hydrocarbon present in this alga. We further show that CrFAP is associated to the thylakoids and that 90% of 7-heptadecene is recovered in this cell fraction. In the fap mutant, photosynthesis activity was not affected under standard growth conditions but was reduced after cold acclimation. A phylogenetic analysis including sequences from Tara Ocean identified almost 200 putative FAPs and indicated that FAP was acquired early after primary endosymbiosis. Within Bikonta, FAP was kept in photosynthetic secondary endosymbiosis lineages but absent in those that lost the plastid. Characterization of recombinant FAPs from various algal genera (Nannochloropsis, Ectocarpus, Galdieria, Chondrus) provided experimental evidence that FAP activity is conserved in red and brown algae and is not limited to unicellular species. These results thus indicate that FAP has been conserved during evolution of most algal lineages when photosynthesis was kept and suggest that its function is linked to photosynthetic membranes.One sentence summaryFAP is present in thylakoids and conserved beyond green algae.

Use of microbes to produce liquid transportation fuels is not yet economically viable. A key point to reduce production costs is the design a cell factory that combines the continuous production of drop-in fuel molecules with the ability to recover products from the cell culture at low cost. Medium-chain hydrocarbons seem ideal targets because they can be produced from abundant fatty acids and, due to their volatility, can be easily collected in gas phase. However, pathways used to produce hydrocarbons from fatty acids require two steps, low efficient enzymes and/or complex electron donors. Recently, a new hydrocarbon-forming route involving a single enzyme called fatty acid photodecarboxylase (FAP) was discovered in microalgae. Here, we show that in illuminated E. coli cultures coexpression of FAP and a medium-chain fatty acid thioesterase results in continuous release of volatile hydrocarbons. Maximum hydrocarbon productivity was reached under low/medium light while higher irradiance resulted in decreased amounts of FAP. It was also found that the production rate of hydrocarbons was constant for at least 5 days and that 30% of total hydrocarbons could be collected in the gas phase of the culture. This work thus demonstrates that the photochemistry of the FAP can be harnessed to design a simple cell factory that continuously produces hydrocarbons easy to recover and in pure form.

International audience; Some microalgae, such as Chlamydomonas reinhardtii, harbor a highly flexible photosynthetic apparatus capable of using different electron acceptors, including carbon dioxide (CO2), protons, or oxygen (O2), allowing survival in diverse habitats. During anaerobic induction of photosynthesis, molecular O2 is produced at photosystem II, while at the photosystem I acceptor side, the reduction of protons into hydrogen (H2) by the plastidial [FeFe]-hydrogenases primes CO2 fixation. Although the interaction between H2 production and CO2 fixation has been extensively studied, their interplay with O2 produced by photosynthesis has not been considered. By simultaneously measuring gas exchange and chlorophyll fluorescence, we identified an O2 photoreduction mechanism that functions during anaerobic dark to light transitions, and demonstrate that flavodiiron proteins (Flvs) are the major players involved in light-dependent O2 uptake. We further show that Flv-mediated O2 uptake is critical for the rapid induction of CO2 fixation, but is not involved in the creation of the micro-oxic niches previously proposed to protect the [FeFe]-hydrogenase from O2. By studying a mutant lacking both hydrogenases (HYDA1 and HYDA2) and both Flvs (FLVA and FLVB), we show that the induction of photosynthesis is strongly delayed in the absence of both sets of proteins. Based on these data, we propose that Flvs are involved in an important intracellular O2 recycling process, which acts as a relay between H2 production and CO2 fixation.

The Type VI secretion system (T6SS) is a multiprotein machine that delivers protein effectors in both prokaryotic and eukaryotic cells, allowing interbacterial competition and virulence. The mechanism of action of the T6SS requires the contraction of a sheath-like structure that propels a needle towards target cells, allowing the delivery of protein effectors. Here, we provide evidence that the entero-aggregative Escherichia coli Sci-1 T6SS is required to eliminate competitor bacteria. We further identify Tle1, a toxin effector encoded by this cluster and showed that Tle1 possesses phospholipase A1 and A2 activities required for the interbacterial competition. Self-protection of the attacker cell is secured by an outer membrane lipoprotein, Tli1, which binds Tle1 in a 1:1 stoichiometric ratio with nanomolar affinity, and inhibits its phospholipase activity. Tle1 is delivered into the periplasm of the prey cells using the VgrG1 needle spike protein as carrier. Further analyses demonstrate that the C-terminal extension domain of VgrG1, including a transthyretin-like domain, is responsible for the interaction with Tle1 and its subsequent delivery into target cells. Based on these results, we propose an additional mechanism of transport of T6SS effectors in which cognate effectors are selected by specific motifs located at the C-terminus of VgrG proteins.

International audience; The type VI secretion system (T6SS) is a specialized macromolecular complex dedicated to the delivery of protein effectors into both eukaryotic and bacterial cells. The general mechanism of action of the T6SS is similar to the injection of DNA by contractile bacteriophages. The cytoplasmic portion of the T6SS is evolutionarily, structurally and functionally related to the phage tail complex. It is composed of an inner tube made of stacked Hcp hexameric rings, engulfed within a sheath and built on a baseplate. This sheath undergoes cycles of extension and contraction, and the current model proposes that the sheath contraction propels the inner tube toward the target cell for effector delivery. The sheath comprises two subunits: TssB and TssC that polymerize under an extended conformation. Here, we show that isolated TssB forms trimers, and we report the crystal structure of a C-terminal fragment of TssB. This fragment comprises a long helix followed by a helical hairpin that presents surface-exposed charged residues. Site-directed mutagenesis coupled to functional assay further showed that these charges are required for proper assembly of the sheath. Positioning of these residues in the extended T6SS sheath structure suggests that they may mediate contacts with the baseplate.

Sunlight is a powerful but fluctuating energy source used by photosynthetic organisms as a substrate for biochemistry. To optimize photosynthetic efficiency, the distribution of energy input between the two photosystems is regulated through state transitions. This mechanism is common to all organisms of the green lineage and depends on the concerted response of the cytochrome b6f complex and the Stt7 kinase to changing redox conditions along the electron transport chain. The identification of a cytochrome b6f stromal motif involved in state transitions gives insight into the mechanism of Stt7 kinase activation.

Summary Each phage infects a limited number of bacterial strains through highly specific interactions of the receptor-binding protein (RBP) at the tip of phage tail and the receptor at the bacterial surface. Lactococcus lactis is covered with a thin polysaccharide pellicle (hexasaccharide repeating units), which is used by a subgroup of phages as a receptor. Using L. lactis and phage 1358 as a model, we investigated the interaction between the phage RBP and the pellicle hexasaccharide of the host strain. A core trisaccharide (TriS), derived from the pellicle hexasaccharide repeating unit, was chemically synthesised, and the crystal structure of the RBP/TriS complex was determined. This provided unprecedented structural details of RBP/receptor site-specific binding. The complete hexasaccharide repeating unit was modelled and found to aptly fit the extended binding site. The specificity observed in in vivo phage adhesion assays could be interpreted in view of the reported structure. Therefore, by combining synthetic carbohydrate chemistry, X-ray crystallography and phage plaquing assays, we suggest that phage adsorption results from distinct recognition of the RBP towards the core TriS or the remaining residues of the hexasacchride receptor. This study provides a novel insight into the adsorption process of phages targeting saccharides as their receptors.

Algal enzyme driven by blue light Microalgae make hydrocarbons. In searching for the enzyme responsible, Sorigué et al. found a glucose-methanolcholine oxidoreductase (see the Perspective by Scrutton). Expression of the enzyme in Escherichia coli showed that hydrocarbon production requires visible light. In fact, the enzyme requires a constant input of blue photons to carry out its catalytic reaction. A long hydrophobic tunnel in the enzyme stabilizes the fatty acid substrates in proximity to the flavin adenine dinucleotide cofactor. Science , this issue p. 903 ; see also p. 872

International audience; Peroxisomes are thought to have played a key role in the evolution of metabolic networks of photosynthetic organisms by connecting oxidative and biosynthetic routes operating in different compartments. While the various oxidative pathways operating in the peroxisomes of higher plants are fairly well characterized, the reactions present in the primitive peroxisomes (microbodies) of algae are poorly understood. Screening of a Chlamydomonas insertional mutant library identified a strain strongly impaired in oil remobilization and defective in Cre05.g232002(CrACX2), a gene encoding a member of the acyl-CoA oxidase/dehydrogenase superfamily. The purified recombinant CrACX2 expressed in Escherichia coli catalyzed the oxidation of fatty acyl-CoAs into trans-2-enoyl-CoA and produced H 2 O 2. This result demonstrated that CrACX2 is a genuine acyl-CoA oxidase, which is responsible for the first step of the peroxisomal fatty acid (FA) β-oxidation spiral. A fluorescent protein-tagging study pointed to a peroxisomal location of CrACX2. The importance of peroxisomal FA β-oxidation in algal physiology was shown by the impact of the mutation on FA turnover during day/night cycles. Moreover, under nitrogen depletion the mutant accumulated 20% more oil than the wild type, illustrating the potential of β-oxidation mutants for algal biotechnology. This study provides experimental evidence that a plant-type FA β-oxidation involving H 2 O 2-producing acyl-CoA oxidation activity has already evolved in the microbodies of the unicellular green alga Chlamydomonas reinhardtii.

International audience; The cytochrome (cyt) $b_6f$ complex and Stt7 kinase regulate the antenna sizes of photosystems I and II through state transitions, which are mediated by a reversible phosphorylation of light harvesting complexes II, depending on the redox state of the plastoquinone pool. When the pool is reduced, the cyt $b_6f$ activates the Stt7 kinase through a mechanism that is still poorly understood. After random mutagenesis of the chloroplast petD gene, coding for subunit IV of the cyt $b_6f$ complex, and complementation of a ΔpetDhost strain by chloroplast transformation, we screened for impaired state transitions in vivo by chlorophyll fluorescence imaging. We show that residues Asn122, Tyr124, and Arg125 in the stromal loop linking helices F and G of cyt $b_6f$ subunit IV are crucial for state transitions. In vitro reconstitution experiments with purified cyt $b_6f$ and recombinant Stt7 kinase domain show that cyt $b_6f$ enhances Stt7 autophosphorylation and that the Arg125 residue is directly involved in this process. The peripheral stromal structure of the cyt $b_6f$ complex had, until now, no reported function. Evidence is now provided of a direct interaction with Stt7 on the stromal side of the membrane

International audience; During oxygenic photosynthesis, the reducing power generated by light energy conversion is mainly used to reduce carbon dioxide. In bacteria and archae, flavodiiron (Flv) proteins catalyze O 2 or NO reduction, thus protecting cells against oxidative or nitrosative stress. These proteins are found in cyanobacteria, mosses, and microalgae, but have been lost in angiosperms. Here, we used chlorophyll fluorescence and oxygen exchange measurement using [ 18 O]-labeled O 2 and a membrane inlet mass spectrometer to characterize Chlamydomonas reinhardtii flvB insertion mutants devoid of both FlvB and FlvA proteins. We show that Flv proteins are involved in a photo-dependent electron flow to oxygen, which drives most of the photosynthetic electron flow during the induction of photosynthesis. As a consequence, the chlorophyll fluorescence patterns are strongly affected in flvB mutants during a light transient, showing a lower PSII operating yield and a slower nonphotochemical quenching induction. Photoautotrophic growth of flvB mutants was indistinguishable from the wild type under constant light, but severely impaired under fluctuating light due to PSI photo damage. Remarkably, net photosynthesis of flv mutants was higher than in the wild type during the initial hour of a fluctuating light regime, but this advantage vanished under long-term exposure, and turned into PSI photo damage, thus explaining the marked growth retardation observed in these conditions. We conclude that the C. reinhardtii Flv participates in a Mehler-like reduction of O 2 , which drives a large part of the photosynthetic electron flow during a light transient and is thus critical for growth under fluctuating light regimes.

The Type VI secretion system (T6SS) is a versatile machine that delivers toxins into either eukaryotic or bacterial cells. It thus represents a key player in bacterial pathogenesis and inter-bacterial competition. Schematically, the T6SS can be viewed as a contractile tail structure anchored to the cell envelope. The contraction of the tail sheath propels the inner tube loaded with effectors towards the target cell. The components of the contracted tail sheath are then recycled by the ClpV AAA+ ATPase for a new cycle of tail elongation. The T6SS is widespread in Gram-negative bacteria and most of their genomes carry several copies of T6SS gene clusters, which might be activated in different conditions. Here, we show that the ClpV ATPases encoded within the two T6SS gene clusters of enteroaggregative Escherichia coli are not interchangeable and specifically participate to the activity of their cognate T6SS. Here we show that this specificity is dictated by interaction between the ClpV N-terminal domains and the N-terminal helices of their cognate TssC1 proteins. We also present the crystal structure of the ClpV1 N-terminal domain, alone or in complex with the TssC1 N-terminal peptide, highlighting the commonalities and diversities in the recruitment of ClpV to contracted sheaths.

Lipoproteins of temperate phage are a broad family of membrane proteins encoded in the lysogeny module of temperate phages. Expression of the ltp(TP-J34) gene of temperate Streptococcus thermophilus phage TP-J34 interferes with phage infection at the stage of triggering DNA release and injection into the cell. Here, we report the first structure of a superinfection exclusion protein. We have expressed and determined the X-ray structure of Ltp(TP-J34). The soluble domain of Ltp(TP-J34) is composed of a tandem of three-helix helix-turn-helix (HTH) domains exhibiting a highly negatively charged surface. By isolating mutants of lactococcal phage P008wt with reduced sensitivities to Ltp(TP-J34) and by genome sequencing of such mutants we obtained evidence supporting the notion that Ltp(TP-J34) targets the phage's tape measure protein (TMP) and blocks its insertion into the cytoplasmic membrane.

Glycerophosphodiester phosphodiesterases (GDPDs; EC 3.1.4.46) typically hydrolyze glycerophosphodiesters to sn-glycerol 3-phosphate (Gro3P) and their corresponding alcohol during patho/physiological processes in bacteria and eukaryotes. GDPD(-like) domains were identified in the structural particle of bacterial viruses (bacteriophages) specifically infecting Gram-positive bacteria. The GDPD of phage 17 (Ld17; GDPD(Ld17)), representative of the group b Lactobacillus delbrueckii subsp. bulgaricus (Ldb)-infecting bacteriophages, was shown to hydrolyze, besides the simple glycerophosphodiester, two complex surface-associated carbohydrates of the Ldb17 cell envelope: the Gro3P decoration of the major surface polysaccharide D-galactan and the oligo(glycerol phosphate) backbone of the partially glycosylated cell wall teichoic acid, a minor Ldb17 cell envelope component. Degradation of cell wall teichoic acid occurs according to an exolytic mechanism, and Gro3P substitution is presumed to be inhibitory for GDPD(Ld17) activity. The presence of the GDPD(Ld17) homotrimer in the viral baseplate structure involved in phage-host interaction together with the dependence of native GDPD activity, adsorption, and efficiency of plating of Ca2+ ions supports a role for GDPD(Ld17) activity during phage adsorption and/or phage genome injection. In contrast to GDPD(Ld17), we could not identify any enzymatic activity for the GDPD-like domain in the neck passage structure of phage 340, a 936-type Lactococcus lactis subsp. lactis bacteriophage. EMPOWER postdoctoral fellowship of the Irish Research Council; [08/IN.1/B1909]; [13/IA/1953]

The Gram-positive bacterium Lactococcus lactis, used for the production of cheeses and other fermented dairy products, falls victim frequently to fortuitous infection by tailed phages. The accompanying risk of dairy fermentation failures in industrial facilities has prompted in-depth investigations of these phages. Lactococcal phage Tuc2009 possesses extensive genomic homology to phage TP901-1. However, striking differences in the baseplate-encoding genes stimulated our interest in solving the structure of this host’s adhesion device. We report here the X-ray structures of phage Tuc2009 receptor binding protein (RBP) and of a “tripod” assembly of three baseplate components, BppU, BppA, and BppL (the RBP). These structures made it possible to generate a realistic atomic model of the complete Tuc2009 baseplate that consists of an 84-protein complex: 18 BppU, 12 BppA, and 54 BppL proteins. The RBP head domain possesses a different fold than those of phages p2, TP901-1, and 1358, while the so-called “stem” and “neck” domains share structural features with their equivalents in phage TP901-1. The BppA module interacts strongly with the BppU N-terminal domain. Unlike other characterized lactococcal phages, Tuc2009 baseplate harbors two different carbohydrate recognition sites: one in the bona fide RBP head domain and the other in BppA. These findings represent a major step forward in deciphering the molecular mechanism by which Tuc2009 recognizes its saccharidic receptor(s) on its host., IMPORTANCE Understanding how siphophages infect Lactococcus lactis is of commercial importance as they cause milk fermentation failures in the dairy industry. In addition, such knowledge is crucial in a general sense in order to understand how viruses recognize their host through protein-glycan interactions. We report here the lactococcal phage Tuc2009 receptor binding protein (RBP) structure as well as that of its baseplate. The RBP head domain has a different fold than those of phages p2, TP901-1, and 1358, while the so-called “stem” and “neck” share the fold characteristics also found in the equivalent baseplate proteins of phage TP901-1. The baseplate structure contains, in contrast to other characterized lactococcal phages, two different carbohydrate binding modules that may bind different motifs of the host’s surface polysaccharide.

The Type VI secretion system (T6SS) is a multiprotein machine that delivers protein effectors in both prokaryotic and eukaryotic cells, allowing interbacterial competition and virulence. The mechanism of action of the T6SS requires the contraction of a sheath-like structure that propels a needle towards target cells, allowing the delivery of protein effectors. Here, we provide evidence that the entero-aggregative Escherichia coli Sci-1 T6SS is required to eliminate competitor bacteria. We further identify Tle1, a toxin effector encoded by this cluster and showed that Tle1 possesses phospholipase A1 and A2 activities required for the interbacterial competition. Self-protection of the attacker cell is secured by an outer membrane lipoprotein, Tli1, which binds Tle1 in a 1:1 stoichiometric ratio with nanomolar affinity, and inhibits its phospholipase activity. Tle1 is delivered into the periplasm of the prey cells using the VgrG1 needle spike protein as carrier. Further analyses demonstrate that the C-terminal extension domain of VgrG1, including a transthyretin-like domain, is responsible for the interaction with Tle1 and its subsequent delivery into target cells. Based on these results, we propose an additional mechanism of transport of T6SS effectors in which cognate effectors are selected by specific motifs located at the C-terminus of VgrG proteins.

The Henipavirus genome is encapsidated by the nucleoprotein (N) within a helical nucleocapsid that recruits the polymerase complex via the phosphoprotein (P). In a previous study, we reported that in henipaviruses, the N-terminal domain of the phosphoprotein and the C-terminal domain of the nucleoprotein (N(TAIL)) are both intrinsically disordered. Here we show that Henipavirus N(TAIL) domains are also disordered in the context of full-length nucleoproteins. We also report the cloning, purification, and characterization of the C-terminal X domains (P(XD)) of Henipavirus phosphoproteins. Using isothermal titration calorimetry, we show that N(TAIL) and P(XD) form a 1:1 stoichiometric complex that is stable under NaCl concentrations as high as 1 M and has a K(D) in the μM range. Using far-UV circular dichroism and nuclear magnetic resonance, we show that P(XD) triggers an increase in the α-helical content of N(TAIL). Using fluorescence spectroscopy, we show that P(XD) has no impact on the chemical environment of a Trp residue introduced at position 527 of the Henipavirus N(TAIL) domain, thus arguing for the lack of stable contacts between the C termini of N(TAIL) and P(XD). Finally, we present a tentative structural model of the N(TAIL)-P(XD) interaction in which a short, order-prone region of N(TAIL) (α-MoRE; amino acids 473-493) adopts an α-helical conformation and is embedded between helices α2 and α3 of P(XD), leading to a relatively small interface dominated by hydrophobic contacts. The present results provide the first detailed experimental characterization of the N-P interaction in henipaviruses and designate the N(TAIL)-P(XD) interaction as a valuable target for rational antiviral approaches.

SPP1 is a siphophage infecting the gram-positive bacterium Bacillus subtilis. The SPP1 tail electron microscopy (EM) reconstruction revealed that it is mainly constituted by conserved structural proteins such as the major tail proteins (gp17.1), the tape measure protein (gp18), the Distal tail protein (Dit, gp19.1), and the Tail associated lysin (gp21). A group of five small genes (22–24.1) follows in the genome but it remains to be elucidated whether their protein products belong or not to the tail. Noteworthy, an unassigned EM density accounting for ∼245 kDa is present at the distal end of the SPP1 tail-tip. We report here the gp23.1 crystal structure at 1.6 A resolution, a protein that lacks sequence identity to any known protein. We found that gp23.1 forms a hexamer both in the crystal lattice and in solution as revealed by light scattering measurements. The gp23.1 hexamer does not fit well in the unassigned SPP1 tail-tip EM density and we hypothesize that this protein might act as a chaperone.

Combinatorial libraries of designed ankyrin repeat proteins (DARPins) have been proven to be a valuable source of specific binding proteins, as they can be expressed at very high levels and are very stable. We report here the selection of DARPins directed against a macromolecular multiprotein complex, the baseplate BppU·BppL complex of the lactococcal phage TP901-1. Using ribosome display, we selected several DARPins that bound specifically to the tip of the receptor-binding protein (RBP, the BppL trimer). The three selected DARPins display high specificity and affinity in the low nanomolar range and bind with a stoichiometry of one DARPin per BppL trimer. The crystal structure of a DARPin complexed with the RBP was solved at 2.1 A resolution. The DARPin·RBP interface is of the concave (DARPin)-convex (RBP) type, typical of other DARPin protein complexes and different from what is observed with a camelid VHH domain, which penetrates the phage p2 RBP inter-monomer interface. Finally, phage infection assays demonstrated that TP901-1 infection of Lactococcus lactis cells was inhibited by each of the three selected DARPins. This study provides proof of concept for the possible use of DARPins to circumvent viral infection. It also provides support for the use of DARPins in co-crystallization, due to their rigidity and their ability to provide multiple crystal contacts.

Acidianus Filamentous Virus 1 (AFV1), isolated from acidic hot springs, is an enveloped lipid-containing archaeal filamentous virus with a linear double-stranded DNA genome. It infects Acidianus, which is a hyperthermostable archaea growing at 85°C and acidic pHs, below pH 3. AFV1-99, a protein of 99 amino acids of unknown function, has homologues in the archaeal virus families Lipothrixviridae and Rudiviridae. We determined the crystal structure of AFV1-99 at 2.05 A resolution. AFV1-99 has a new fold, is hyperthermostable (up to 95°C) and resists to extreme pH (between pH 0 and 11) and to the combination of high temperature (95°C) and low pH (pH 0). It possesses characteristics of hyperthermostable proteins, such as a high content of charged residues.

In the course of a crystallographic study of the Methanosarcina mazei CorA transporter, the membrane protein was obtained with at least 95% purity and was submitted to crystallization trials. Small crystals (

International audience; Calmodulin (CaM) is an essential Ca(II)-dependent regulator of cell physiology. To understand its interaction with Ca(II) at a molecular level, it is essential to examine Ca(II) binding at each site of the protein, even if it is challenging to estimate the site-specific binding properties of the interdependent CaM-binding sites. In this study, we evaluated the site-specific Ca(II)-binding affinity of sites I and II of the N-terminal domain by combining site-directed mutagenesis and spectrofluorimetry. The mutations had very low impact on the protein structure and stability. We used these binding constants to evaluate the inter-site cooperativity energy and compared it with its lower limit value usually reported in the literature. We found that site I affinity for Ca(II) was 1.5 times that of site II and that cooperativity induced an approximately tenfold higher affinity for the second Ca(II)-binding event, as compared to the first one. We further showed that insertion of a tryptophan at position 7 of site II binding loop significantly increased site II affinity for Ca(II) and the intra-domain cooperativity. ΔH and ΔS parameters were studied by isothermal titration calorimetry for Ca(II) binding to site I, site II and to the entire N-terminal domain. They showed that calcium binding is mainly entropy driven for the first and second binding events. These findings provide molecular information on the structure-affinity relationship of the individual sites of the CaM N-terminal domain and new perspectives for the optimization of metal ion binding by mutating the EF-hand loops sequences.

Each phage infects a limited number of bacterial strains through highly specific interactions of the receptor-binding protein (RBP) at the tip of phage tail and the receptor at the bacterial surface. Lactococcus lactis is covered with a thin polysaccharide pellicle (hexasaccharide repeating units), which is used by a subgroup of phages as a receptor. Using L. lactis and phage 1358 as a model, we investigated the interaction between the phage RBP and the pellicle hexasaccharide of the host strain. A core trisaccharide (TriS), derived from the pellicle hexasaccharide repeating unit, was chemically synthesised, and the crystal structure of the RBP/TriS complex was determined. This provided unprecedented structural details of RBP/receptor site-specific binding. The complete hexasaccharide repeating unit was modelled and found to aptly fit the extended binding site. The specificity observed in in vivo phage adhesion assays could be interpreted in view of the reported structure. Therefore, by combining synthetic carbohydrate chemistry, X-ray crystallography and phage plaquing assays, we suggest that phage adsorption results from distinct recognition of the RBP towards the core TriS or the remaining residues of the hexasacchride receptor. This study provides a novel insight into the adsorption process of phages targeting saccharides as their receptors.

Phage p2, a member of the lactococcal 936 phage species, infects Lactococcus lactis strains by binding initially to specific carbohydrate receptors using its receptor-binding protein (RBP). The structures of p2 RBP, a homotrimeric protein composed of three domains, and of its complex with a neutralizing llama VH domain (VHH5) have been determined (S. Spinelli, A. Desmyter, C. T. Verrips, H. J. de Haard, S. Moineau, and C. Cambillau, Nat. Struct. Mol. Biol. 13:85-89, 2006). Here, we show that VHH5 was able to neutralize 12 of 50 lactococcal phages belonging to the 936 species. Moreover, escape phage mutants no longer neutralized by VHH5 were isolated from 11 of these phages. All of the mutations (but one) cluster in the RBP/VHH5 interaction surface that delineates the receptor-binding area. A glycerol molecule, observed in the 1.7-Å resolution structure of RBP, was found to bind tightly ( K d = 0.26 μM) in a crevice located in this area. Other saccharides bind RBP with comparable high affinity. These data prove the saccharidic nature of the bacterial receptor recognized by phage p2 and identify the position of its binding site in the RBP head domain.

Cutinases belong to the α/β-hydrolase fold family of enzymes and degrade cutin and various esters, including triglycerides, phospholipids and galactolipids. Cutinases are able to degrade aggregated and soluble substrates because, in contrast with true lipases, they do not have a lid covering their catalytic machinery. We report here the structure of a cutinase from the fungus Trichoderma reesei (Tr) in native and inhibitor-bound conformations, along with its enzymatic characterization. A rare characteristic of Tr cutinase is its optimal activity at acidic pH. Furthermore, Tr cutinase, in contrast with classical cutinases, possesses a lid covering its active site and requires the presence of detergents for activity. In addition to the presence of the lid, the core of the Tr enzyme is very similar to other cutinase cores, with a central five-stranded β-sheet covered by helices on either side. The catalytic residues form a catalytic triad involving Ser164, His229 and Asp216 that is covered by the two N-terminal helices, which form the lid. This lid opens in the presence of surfactants, such as β-octylglucoside, and uncovers the catalytic crevice, allowing a C11Y4 phosphonate inhibitor to bind to the catalytic serine. Taken together, these results reveal Tr cutinase to be a member of a new group of lipolytic enzymes resembling cutinases but with kinetic and structural features of true lipases and a heightened specificity for long-chain triglycerides.

International audience; Triacylglycerol (TAG) lipases have been thoroughly characterized in mammals and microorganisms. By contrast, very little is known on plant TAG lipases. An Arabidopsis cDNA called AtLip1 (At2g15230), which exhibits strong homology to lysosomal acid lipase, was found to drive the synthesis of an active TAG lipase when expressed in the baculovirus system. The lipase had a maximal activity at pH 6 and the specific activity was estimated to be about 45 micromol min(-1) mg(-1) protein using triolein as a substrate. Knock-out mutant analysis showed no phenotype during germination indicating that this enzyme is fully dispensable for TAG storage breakdown during germination. Northern blot analyses indicated that the transcript is present in all tissues tested.

The Gram-positive bacterium Lactococcus lactis is used for the production of cheeses and other fermented dairy products. Accidental infection of L. lactis cells by virulent lactococcal tailed phages is one of the major risks of fermentation failures in industrial dairy factories. Lactococcal phage 1358 possesses a host range limited to a few L. lactis strains and strong genomic similarities to Listeria phages. We report here the X-ray structures of phage 1358 receptor binding protein (RBP) in complex with monosaccharides. Each monomer of its trimeric RBP is formed of two domains: a “shoulder” domain linking the RBP to the rest of the phage and a jelly roll fold “head/host recognition” domain. This domain harbors a saccharide binding crevice located in the middle of a monomer. Crystal structures identified two sites at the RBP surface, ∼8 Å from each other, one accommodating a GlcNAc monosaccharide and the other accommodating a GlcNAc or a glucose 1-phosphate (Glc1P) monosaccharide. GlcNAc and GlcNAc1P are components of the polysaccharide pellicle that we identified at the cell surface of L. lactis SMQ-388, the host of phage 1358. We therefore modeled a galactofuranose (Gal f ) sugar bridging the two GlcNAc saccharides, suggesting that the trisaccharidic motif GlcNAc-Gal f -GlcNAc (or Glc1P) might be common to receptors of genetically distinct lactococcal phages p2, TP091-1, and 1358. Strain specificity might therefore be elicited by steric clashes induced by the remaining components of the pellicle hexasaccharide. Taken together, these results provide a first insight into the molecular mechanism of host receptor recognition by lactococcal phages. IMPORTANCE Siphophages infecting the Gram-positive bacterium Lactococcus lactis are sources of milk fermentation failures in the dairy industry. We report here the structure of the pellicle polysaccharide from L. lactis SMQ-388, the specific host strain of phage 1358. We determined the X-ray structures of the lytic lactococcal phage 1358 receptor binding protein (RBP) in complex with monosaccharides. The positions and nature of monosaccharides bound to the RBP are in agreement with the pellicle structure and suggest a general binding mode of lactococcal phages to their pellicle saccharidic receptor.

International audience; The type VI secretion system (T6SS) is a widespread machine used by bacteria to control their environment and kill or disable bacterial species or eukaryotes through toxin injection. The T6SS comprises a central tube formed of stacked hexamers of hemolysin co-regulated proteins (Hcp) and terminated by a trimeric valine-glycine repeat protein G (VgrG) component, the cell puncturing device. A contractile tail sheath, formed by the TssB and TssC proteins, surrounds this tube. This syringe-like machine has been compared to an inverted phage, as both Hcp and VgrG share structural homology with tail components of Caudovirales. Here we solved the crystal structure of a tryptophan-substituted double mutant of Hcp1 from enteroaggregative Escherichia coli and compared it to the structures of other Hcps. Interestingly, we observed that the purified Hcp native protein is unable to form tubes in vitro. To better understand the rationale for observation, we measured the affinity of Hcp1 hexamers with themselves by surface plasmon resonance. The intra-hexamer interaction is weak, with a K D value of 7.2 mM. However, by engineering double cysteine mutants at defined positions, tubes of Hcp1 gathering up to 15 stacked hexamers formed in oxidative conditions. These results, together with those available in the literature regarding TssB and TssC, suggest that assembly of the T6SS tube differs significantly from that of Sipho-or Myoviridae.

Studies on viruses in hot aquatic ecosystems, at temperatures above 808C, revealed unusual morphotypes and quasi-orphan genome sequences which made it possible to establish several new families of double-stranded (ds) DNA viruses. Among them, the Lipothrixviridae are enveloped lipid-containing filamentous viruses with linear double-stranded DNA genomes (AFV1-8, TTV1-3, and Sulfolobus islandicus filamentous virus [SIFV]).1–4 The hosts of these viruses are hyperthermophilic and hyperacidophilic archaea of the genera Acidianus or Sulfolobus. The 35 genomes of archaeal viruses that are presently sequenced have in common that more than 80% of their ORFs do not share any sequence homology with ORFs of other viruses or organisms apart from other archaeal viruses.4 Putative functions based on weak sequence identities have been proposed for a few ORFs, including structural proteins, glycosyl transerases, helicases, and integrases. Apart from structural proteins, it is expected that other ORFs should code for enzymes or proteins involved in viral infection and replication, and be functional homologues of bacterial, archaeal, or eukaryotic proteins. Moreover, they may reveal novel features which can be exploited for biotechnological applications. To get insight into the function of the Lipothrixviridae proteome, we have initiated a program to determine the structure of conserved ORFs. We present here the crystal structure of ORF14 of SIFV (Lipothrixviridae), a protein of 112 residues which has homologues in other archaeal viruses, Sulfolobus islandicus rod-shaped virus 1 (SIRV1, Rudiviridae; ORF99, ORF100, ORF95, and ORF96) and Acidianus filamentous virus 1 (AFV1, Lipothrixviridae; ORF99) [Fig. 1(A)]. SIFV-14 has a domain swapped structure and forms fiber structures in the crystal.

Many phages employ a large heteropolymeric organelle located at the tip of the tail, termed the baseplate, for host recognition. Contrast electron microscopy (EM) of the lactococcal phage Tuc2009 baseplate and its host-binding subunits, the so-called tripods, allowed us to obtain a low-resolution structural image of this organelle. Structural comparisons between the baseplate of the related phage TP901-1 and that of Tuc2009 demonstrated that they are highly similar, except for the presence of an additional protein in the Tuc2009 baseplate (BppA Tuc2009 ), which is attached to the top of the Tuc2009 tripod structure. Recombinantly produced Tuc2009 or TP901-1 tripods were shown to bind specifically to their particular host cell surfaces and are capable of almost fully and specifically eliminating Tuc2009 or TP901-1 phage adsorption, respectively. In the case of Tuc2009, such adsorption-blocking ability was reduced in tripods that lacked BppA Tuc2009 , indicating that this protein increases the binding specificity and/or affinity of the Tuc2009 tripod to its host receptor.

Lipoproteins of temperate phage are a broad family of membrane proteins encoded in the lysogeny module of temperate phages. Expression of the ltp(TP-J34) gene of temperate Streptococcus thermophilus phage TP-J34 interferes with phage infection at the stage of triggering DNA release and injection into the cell. Here, we report the first structure of a superinfection exclusion protein. We have expressed and determined the X-ray structure of Ltp(TP-J34). The soluble domain of Ltp(TP-J34) is composed of a tandem of three-helix helix-turn-helix (HTH) domains exhibiting a highly negatively charged surface. By isolating mutants of lactococcal phage P008wt with reduced sensitivities to Ltp(TP-J34) and by genome sequencing of such mutants we obtained evidence supporting the notion that Ltp(TP-J34) targets the phage's tape measure protein (TMP) and blocks its insertion into the cytoplasmic membrane.

Lactococcal phages belong to a large family of Siphoviridae and infect Lactococcus lactis, a gram-positive bacterium used in commercial dairy fermentations. These phages are believed to recognize and bind specifically to pellicle polysaccharides covering the entire bacterium. The phage TP901-1 baseplate, located at the tip of the tail, harbors 18 trimeric receptor binding proteins (RBPs) promoting adhesion to a specific lactococcal strain. Phage TP901-1 adhesion does not require major conformational changes or Ca(2+), which contrasts other lactococcal phages. Here, we produced and characterized llama nanobodies raised against the purified baseplate and the Tal protein of phage TP901-1 as tools to dissect the molecular determinants of phage TP901-1 infection. Using a set of complementary techniques, surface plasmon resonance, EM, and X-ray crystallography in a hybrid approach, we identified binders to the three components of the baseplate, analyzed their affinity for their targets, and determined their epitopes as well as their functional impact on TP901-1 phage infectivity. We determined the X-ray structures of three nanobodies in complex with the RBP. Two of them bind to the saccharide binding site of the RBP and are able to fully neutralize TP901-1 phage infectivity, even after 15 passages. These results provide clear evidence for a practical use of nanobodies in circumventing lactococcal phages viral infection in dairy fermentation.

Henipaviruses are recently emerged severe human pathogens within the Paramyxoviridae family. Their genome is encapsidated by the nucleoprotein (N) within a helical nucleocapsid that recruits the polymerase complex via the phosphoprotein (P). We have previously shown that in Henipaviruses the N protein possesses an intrinsically disordered C-terminal domain, N(TAIL), which undergoes α-helical induced folding in the presence of the C-terminal domain (P(XD)) of the P protein. Using computational approaches, we previously identified within N(TAIL) four putative molecular recognition elements (MoREs) with different structural propensities, and proposed a structural model for the N(TAIL)-P(XD) complex where the MoRE encompassing residues 473-493 adopt an α-helical conformation at the P(XD) surface. In this work, for each N(TAIL) protein, we designed four deletion constructs bearing different combinations of the predicted MoREs. Following purification of the N(TAIL) truncated proteins from the soluble fraction of E. coli, we characterized them in terms of their conformational, spectroscopic and binding properties. These studies provided direct experimental evidence for the structural state of the four predicted MoREs, and showed that two of them have clear α-helical propensities, with the one spanning residues 473-493 being strictly required for binding to P(XD). We also showed that Henipavirus N(TAIL) and P(XD) form heterologous complexes, indicating that the P(XD) binding regions are functionally interchangeable between the two viruses. By combining spectroscopic and conformational analyses, we showed that the content in regular secondary structure is not a major determinant of protein compaction.

Acidianus two-tailed virus (ATV) infects crenarchaea of the genus Acidianus living in terrestrial thermal springs at extremely high temperatures and low pH. ATV is a member of the Bicaudaviridae virus family and undergoes extra-cellular development of two tails, a process that is unique in the viral world. To understand this intriguing phenomenon, we have undertaken structural studies of ATV virion proteins and here we present the crystal structure of one of these proteins, ATV[Formula: see text]. ATV[Formula: see text] forms tetramers in solution and a molecular envelope is provided for the tetramer, computed from small-angle X-ray scattering (SAXS) data. The crystal structure has properties typical of hyperthermostable proteins, including a relatively high number of salt bridges. However, the protein also exhibits flexible loops and surface pockets. Remarkably, ATV[Formula: see text] displays a new [Formula: see text] protein fold, consistent with the absence of homologues of this protein in public sequence databases.

Type VI secretion systems (T6SS) are trans-envelope machines dedicated to the secretion of virulence factors into eukaryotic or prokaryotic cells, therefore required for pathogenesis and/or for competition towards neighboring bacteria. The T6SS apparatus resembles the injection device of bacteriophage T4, and is anchored to the cell envelope through a membrane complex. This membrane complex is composed of the TssL, TssM and TagL inner membrane anchored proteins and of the TssJ outer membrane lipoprotein. Here, we report the crystal structure of the enteroaggregative Escherichia coli Sci1 TssJ lipoprotein, a two four-stranded β-sheets protein that exhibits a transthyretin fold with an additional α-helical domain and a protruding loop. We showed that TssJ contacts TssM through this loop since a loop depleted mutant failed to interact with TssM in vitro or in vivo. Biophysical analysis of TssM and TssJ-TssM interaction suggest a structural model of the membrane-anchored outer shell of T6SS. Collectively, our results provide an improved understanding of T6SS assembly and encourage structure-aided drug design of novel antimicrobials targeting T6SS., Author Summary Type VI secretion systems (T6SS) are specialized secretion machines responsible for the transport of virulence factors. T6SS are versatile as they are able to target both eukaryotic and prokaryotic cells. They therefore play an important role in pathogenesis by acting directly on the host, as well as eliminating competing bacteria from the niche. At a molecular level, T6SS are composed of a minimum of 13 proteins called core-components, all required for the activity of the secretion system. These core-components can be divided in two groups: soluble proteins having a common evolution history with bacteriophage T4 subunits, and membrane or membrane-associated proteins required for anchoring the bacteriophage-like structure to the envelope. Here, we report the crystal structure of one of the membrane-associated core component, the TssJ lipoprotein. The structure exhibits a transthyretin fold supplemented with additional structural elements. One of these, a loop connecting two beta-strands, is responsible for the interaction of the TssJ lipoprotein with the C-terminal domain of the inner membrane protein TssM. We propose that these two proteins link the two membranes and form a channel accommodating the bacteriophage-like structure. These results provide important new insights to understand the biogenesis of these secretion apparati.

We report here the characterization of several large structural protein complexes forming the baseplates (or part of them) of Siphoviridae phages infecting Lactococcus lactis: TP901-1, Tuc2009 and p2. We revisited a "block cloning" expression strategy and extended this approach to genomic fragments encoding proteins whose interacting partners have not yet been clearly identified. Biophysical characterization of some of these complexes using circular dichroism and size exclusion chromatography, coupled with on-line light scattering and refractometry, demonstrated that the over-produced recombinant proteins interact with each other to form large (up to 1.9MDa) and stable baseplate assemblies. Some of these complexes were characterized by electron microscopy confirming their structural homogeneity as well as providing a picture of their overall molecular shapes and symmetry. Finally, using these results, we were able to highlight similarities and differences with the well characterized much larger baseplate of the myophage T4.

Combinatorial libraries of designed ankyrin repeat proteins (DARPins) have been proven to be a valuable source of specific binding proteins, as they can be expressed at very high levels and are very stable. We report here the selection of DARPins directed against a macromolecular multiprotein complex, the baseplate BppU·BppL complex of the lactococcal phage TP901-1. Using ribosome display, we selected several DARPins that bound specifically to the tip of the receptor-binding protein (RBP, the BppL trimer). The three selected DARPins display high specificity and affinity in the low nanomolar range and bind with a stoichiometry of one DARPin per BppL trimer. The crystal structure of a DARPin complexed with the RBP was solved at 2.1 Å resolution. The DARPin·RBP interface is of the concave (DARPin)-convex (RBP) type, typical of other DARPin protein complexes and different from what is observed with a camelid VHH domain, which penetrates the phage p2 RBP inter-monomer interface. Finally, phage infection assays demonstrated that TP901-1 infection of Lactococcus lactis cells was inhibited by each of the three selected DARPins. This study provides proof of concept for the possible use of DARPins to circumvent viral infection. It also provides support for the use of DARPins in co-crystallization, due to their rigidity and their ability to provide multiple crystal contacts.

Lactococcus lactis , a gram-positive bacterium widely used by the dairy industry to manufacture cheeses, is subject to infection by a diverse population of virulent phages. We have previously determined the structures of three receptor binding proteins (RBPs) from lactococcal phages TP901-1, p2, and bIL170, each of them having a distinct host range. Virulent phages p2 and bIL170 are classified within the 936 group, while the temperate phage TP901-1 is a member of the genetically distinct P335 polythetic group. These RBPs comprise three domains: the N-terminal domain, binding to the virion particle; a β-helical linker domain; and the C-terminal domain, bearing the receptor binding site used for host recognition. Here, we have designed, expressed, and determined the structure of an RBP chimera in which the N-terminal and linker RBP domains of phage TP901-1 (P335) are fused to the C-terminal RBP domain of phage p2 (936). This chimera exhibits a stable structure that closely resembles the parental structures, while a slight displacement of the linker made RBP domain adaptation efficient. The receptor binding site is structurally indistinguishable from that of native p2 RBP and binds glycerol with excellent affinity.

We report here a general strategy to overproduce and characterize membrane transporters. To illustrate our approach, we selected one member of the CorA transporter family among four tested that belonged to different species. This approach is transposable to other membrane proteins and involves the following steps: (i) cloning by homologous recombination, (ii) high-throughput expression screening, (iii) fermenter-based large-scale production, (iv) high-throughput detergent solubilization screening, (v) protein purification, (vi) multiangle static light scattering/refractometry characterization of purified proteins, (vii) circular dichroism spectroscopy, and (viii) detergent concentration measurements by Fourier transform infrared (FT-IR) spectroscopy. Methanosarcina mazei CorA was expressed in milligram quantities and purified (> 95% pure). n-Dodecyl-beta-D-maltopyranoside (DDM) retained the pentameric native structure of this transporter; thus, we selected it as working detergent. Furthermore, we measured the detergent concentration in our purified and concentrated protein sample by FT-IR to maintain it as low as possible. Our strategy can be adapted to many structural biology approaches as well as for study of single membrane proteins in a variety of conditions.

Phages infecting Lactococcus lactis, a Gram-positive bacterium, are a recurrent problem in the dairy industry. Despite their economical importance, the knowledge on these phages, belonging mostly to Siphoviridae, lags behind that accumulated for members of Myoviridae. The three-dimensional structures of the receptor-binding proteins (RBP) of three lactococcal phages have been determined recently, illustrating their modular assembly and assigning the nature of their bacterial receptor. These RBPs are attached to the baseplate, a large phage organelle, located at the tip of the tail. Tuc2009 baseplate is formed by the products of 6 open read frames, including the RBP. Because phage binding to its receptor induces DNA release, it has been postulated that the baseplate might be the trigger for DNA injection. We embarked on a structural study of the lactococcal phages baseplate, ultimately to gain insight into the triggering mechanism following receptor binding. Structural features of the Tuc2009 baseplate were established using size exclusion chromatography coupled to on-line UV-visible absorbance, light scattering, and refractive index detection (MALS/UV/RI). Combining the results of this approach with literature data led us to propose a "low resolution" model of Tuc2009 baseplate. This model will serve as a knowledge base to submit relevant complexes to crystallization trials.

Lipocalins, a widespread multifunctional family of small proteins (15–25kDa) have been first described in eukaryotes and more recently in Gram-negative bacteria. Bacterial lipocalins belonging to class I are outer membrane lipoproteins, among which Blc from E. coli is the better studied. Blc is expressed under conditions of starvation and high osmolarity, conditions known to exert stress on the cell envelope. The structure of Blc that we have previously solved (V. Campanacci, D. Nurizzo, S. Spinelli, C. Valencia, M. Tegoni, C. Cambillau, FEBS Lett. 562 (2004) 183–188.) suggested its possible role in binding fatty acids or phospholipids. Both physiological and structural data on Blc, therefore, point to a role in storage or transport of lipids necessary for membrane maintenance. In order to further document this hypothesis for Blc function, we have performed binding studies using fluorescence quenching experiments. Our results indicate that dimeric Blc binds fatty acids and phospholipids in a micromolar Kd range. The crystal structure of Blc with vaccenic acid, an unsaturated C18 fatty acid, reveals that the binding site spans across the Blc dimer, opposite to its membrane anchored face. An exposed unfilled pocket seemingly suited to bind a polar group attached to the fatty acid prompted us to investigate lyso-phospholipids, which were found to bind in a nanomolar Kd range. We discuss these findings in terms of a potential role for Blc in the metabolism of lysophospholipids generated in the bacterial outer membrane.

A large-scale programme has been embarked upon aiming towards the structural determination of conserved proteins from viruses infecting hyperthermophilic archaea. Here, the crystallization of protein 14 from the archaeal virus SIFV is reported. This protein, which contains 111 residues (MW 13 465 Da), was cloned and expressed in Escherichia coli with an N-terminal His(6) tag and purified to homogeneity. The tag was subsequently cleaved and the protein was crystallized using PEG 1000 or PEG 4000 as a precipitant. Large crystals were obtained of the native and the selenomethionine-labelled protein using sitting drops of 100-300 nl. Crystals belong to space group P6(2)22 or P6(4)22, with unit-cell parameters a = b = 68.1, c = 132.4 A. Diffraction data were collected to a maximum acceptable resolution of 2.95 and 3.20 A for the SeMet-labelled and native protein, respectively.

Lactococcus lactis , a gram-positive bacterium widely used by the dairy industry, is subject to lytic phage infections. In the first step of infection, phages recognize the host saccharidic receptor using their receptor binding protein (RBP). Here, we report the 2.30-Å-resolution crystal structure of the RBP head domain from phage bIL170. The structure of the head monomer is remarkably close to those of other lactococcal phages, p2 and TP901-1, despite any sequence identity with them. The knowledge of the three-dimensional structures of three RBPs gives a better insight into the module exchanges which have occurred among phages.