Search

Liquid droplets of biomolecules play key roles in organizing cellular behavior, and are also technologically relevant, yet physical studies of dynamic processes of such droplets have generally been lacking. Here, we investigate and quantify the dynamics of formation of dilute internal inclusions, i.e., vacuoles, within a model system consisting of liquid droplets of DNA 'nanostar' particles. When acted upon by DNA-cleaving restriction enzymes, these DNA droplets exhibit cycles of appearance, growth, and bursting of internal vacuoles. Analysis of vacuole growth shows their radius increases linearly in time. Further, vacuoles pop upon reaching the droplet interface, leading to droplet motion driven by the osmotic pressure of restriction fragments captured in the vacuole. We develop a model that accounts for the linear nature of vacuole growth, and the pressures associated with motility, by describing the dynamics of diffusing restriction fragments. The results illustrate the complex non-equilibrium dynamics possible in biomolecular condensates.

The delivery of small particles into porous environments remains highly challenging because of the low permeability to the fluids that carry these colloids. Even more challenging is that the specific location of targets in the porous environment usually is not known and cannot be determined from the outside. Here, we demonstrate a two-step strategy to deliver suspended colloids to targets that are "hidden" within closed porous media. The first step serves to automatically convert any hidden targets into soluto-inertial "beacons," capable of sustaining long-lived solute outfluxes. The second step introduces the deliverable objects, which are designed to autonomously migrate against the solute fluxes emitted by the targets, thereby following chemical trails that lead to the target. Experimental and theoretical demonstrations of the strategy lay out the design elements required for the solute and the deliverable objects, suggesting routes to delivering colloidal objects to hidden targets in various environments and technologies.

Surfactants - molecules and particles that preferentially adsorb to fluid interfaces - play a ubiquitous role in the fluids of industry, of nature, and of life. Since most surfactants cannot be seen directly, their behavior must be inferred from their impact on observed flows, like the buoyant rise of a bubble, or the thickness of a coating film. In so doing, however, a difficulty arises: physically distinct surfactant processes can affect measurable flows in qualitatively identical ways, raising the specter of confusion or even misinterpretation. This Perspective describes, in one coherent piece, both the equilibrium properties and dynamic processes of surfactants, to better enable the fluid mechanics community to understand, interpret, and design surfactant/fluid systems. Specifically, §2 treats the equilibrium thermodynamics of surfactants at interfaces, including surface pressure, isotherms of soluble and insoluble surfactants, and surface dilatational moduli (Gibbs and Marangoni). §3 describes surfactant dynamics in fluid systems, including surfactant transport and interfacial stress boundary conditions, the competition between surface diffusion, advection, and adsorption/desorption, Marangoni stresses and flows, and surface excess rheology. §4 discusses paradigmatic problems from fluid mechanics that are impacted by surfactants, including translating drops and bubbles, surfactant adsorption to clean and oscillating interfaces; capillary wave damping, thin film dynamics, foam drainage, and the dynamics of particles and probes at surfactant-laden interfaces. Finally, §5 discusses the additional richness and complexity that frequently arise in 'real' surfactants, including phase transitions, phase coexistence, and polycrystalline phases within surfactant monolayers, and their impact on non-Newtonian surface rheology.

Phospholipids are found throughout the natural world, including the lung surfactant (LS) layer that reduces pulmonary surface tension and enables breathing. Fibrinogen, a protein involved in the blood clotting process, is implicated in LS inactivation and the progression of disorders such as acute respiratory distress syndrome. However, the interaction between fibrinogen and LS at the air-water interface is poorly understood. Through a combined microrheological, confocal and epifluorescence microscopy approach we quantify the interfacial shear response and directly image the morphological evolution when a model LS monolayer is penetrated by fibrinogen. When injected into the subphase beneath a monolayer of the phospholipid dipalmitoylphosphatidylcholine (DPPC, the majority component of LS), fibrinogen preferentially penetrates disordered liquid expanded (LE) regions and accumulates on the boundaries between LE DPPC and liquid condensed (LC) DPPC domains. Thus, fibrinogen is line active. Aggregates grow from the LC domain boundaries, ultimately forming a percolating network. This network stiffens the interface compared to pure DPPC and imparts the penetrated monolayer with a viscoelastic character reminiscent of a weak gel. When the DPPC monolayer is initially compressed beyond LE-LC coexistence, stiffening is significantly more modest and the penetrated monolayer retains a viscous-dominated, DPPC-like character.

Structures and particles that slowly release solute into solution can attract or repel other particles in suspension via diffusiophoresis, a process we termed "soluto-inertial (SI) interactions." These SI interactions involve "beacons" that establish and sustain nonequilibrium solute fluxes over long durations. Here, we demonstrate the versatility of the SI concept and introduce distinct strategies to manipulate solute gradients and, hence, suspension behavior using beacons with different physicochemical properties. First, we demonstrate on-demand particle migration using beacons that can be actuated with a trigger. We then show the synergy between multiple, distinct beacons that modify solute fluxes in a way that allows directed, yet selective, colloidal migration to specific target sites. Moreover, this multibeacon harmony enhances migration velocities, and delays the equilibration of the SI effect. The different SI techniques highlighted here suggest previously unidentified possibilities for sorting and separating colloidal mixtures, targeting particle delivery, and enhancing rates of suspension flocculation.

All mammals depend on lung surfactant (LS) to reduce surface tension at the alveolar interface and facilitate respiration. The inactivation of LS in acute respiratory distress syndrome (ARDS) is generally accompanied by elevated levels of fibrinogen and other blood plasma proteins in the alveolar space. Motivated by the mechanical role fibrinogen may play in LS inactivation, we measure the interfacial rheology of mixed monolayers of fibrinogen and dipalmitoylphosphatidylcholine (DPPC), the main constituent of LS, and compare these to the single species monolayers. We find DPPC to be ineffective at displacing preadsorbed fibrinogen, which gives the resulting mixed monolayer a strongly elastic shear response. By contrast, how effectively a pre-existing DPPC monolayer prevents fibrinogen adsorption depends upon its surface pressure. At low DPPC surface pressures, fibrinogen penetrates DPPC monolayers, imparting a mixed viscoelastic shear response. At higher initial DPPC surface pressures, this response becomes increasingly viscous-dominated, and the monolayer retains a more fluid, DPPC-like character. Fluorescence microscopy reveals that the mixed monolayers exhibit qualitatively different morphologies. Fibrinogen has a strong, albeit preparation-dependent, mechanical effect on phospholipid monolayers, which may contribute to LS inactivation and disorders such as ARDS.

Microbutton rheometry reveals that the chiral morphology of dipalmitoylphosphatidylcholine (DPPC) monolayers imparts a chiral nonlinear rheological response. The nonlinear elastic modulus and yield stress of DPPC monolayers are greater when sheared clockwise (C), against the natural winding direction of DPPC domains, than counter-clockwise (CC). Under strong CC shear strains, domains deform plastically; by contrast, domains appear to fracture under strong C shearing. After CC shearing, extended LC domains develop regular patterns of new invaginations as they recoil, which we hypothesize reflect the nucleation and growth of new defect lines across which the tilt direction undergoes a step change in orientation. The regular spacing of these twist-gradient defects is likely set by a competition between the molecular chirality and the correlation length of the DPPC lattice. The macroscopic mechanical consequences of DPPC's underlying molecular chirality are remarkable, given the single-component, non-cross-linked nature of the monolayers they form.

The surface shear viscosity of an insoluble surfactant monolayer often depends strongly on its surface pressure. Here, we show that a particle moving within a bounded monolayer breaks the kinematic reversibility of low-Reynolds-number flows. The Lorentz reciprocal theorem allows such irreversibilities to be computed without solving the full nonlinear equations, giving the leading-order contribution of surface pressure-dependent surface viscosity. In particular, we show that a disc translating or rotating near an interfacial boundary experiences a force in the direction perpendicular to that boundary. In unbounded monolayers, coupled modes of motion can also lead to non-intuitive trajectories, which we illustrate using an interfacial analogue of the Magnus effect. This perturbative approach can be extended to more complex geometries, and to two-dimensional suspensions more generally.

The surface shear rheology of many insoluble surfactants depends strongly on the surface pressure (or concentration) of that surfactant. Here we highlight the dramatic consequences that surface-pressure-dependent surface viscosities have on interfacially dominant flows, by considering lubrication-style geometries within high Boussinesq (Bo) number flows. As with three-dimensional lubrication, high-Bo surfactant flows through thin gaps give high surface pressures, which in turn increase the local surface viscosity, further amplifying lubrication stresses and surface pressures. Despite their strong nonlinearity, the governing equations are separable, so that results from two-dimensional Newtonian lubrication analyses may be immediately adapted to treat surfactant monolayers with a general functional form of ηs(Π). Three paradigmatic systems are analyzed to reveal qualitatively new features: a maximum, self-limiting value for surfactant fluxes and particle migration velocities appears for Π-thickening surfactants, and kinematic reversibility is broken for the journal bearing and for suspensions more generally.

Using a microfluidic system to impose and maintain controlled, steady-state multicomponent pH and electrolyte gradients, we present systems where the diffusiophoretic migration of suspended colloids leads them to focus at a particular position, even in steady-state gradients. We show that naively superpositing effects of each gradient may seem conceptually and qualitatively reasonable, yet is invalid due to the coupled transport of these multicomponent electrolytes. In fact, reformulating the classic theories in terms of the flux of each species (rather than local gradients) reveals rather stringent conditions that are necessary for diffusiophoretic focusing in steady gradients. Either particle surface properties must change as a function of local composition in solution (akin to isoelectric focusing in electrophoresis), or chemical reactions must occur between electrolyte species, for such focusing to be possible. The generality of these findings provides a conceptual picture for understanding, predicting, or designing diffusiophoretic systems.

Equilibrium interactions between particles in aqueous suspensions are limited to distances less than 1 μm. Here, we describe a versatile concept to design and engineer nonequilibrium interactions whose magnitude and direction depends on the surface chemistry of the suspended particles, and whose range may extend over hundreds of microns and last thousands of seconds. The mechanism described here relies on diffusiophoresis, in which suspended particles migrate in response to gradients in solution. Three ingredients are involved: a soluto-inertial "beacon" designed to emit a steady flux of solute over long time scales; suspended particles that migrate in response to the solute flux; and the solute itself, which mediates the interaction. We demonstrate soluto-inertial interactions that extend for nearly half a millimeter and last for tens of minutes, and which are attractive or repulsive, depending on the surface chemistry of the suspended particles. Experiments agree quantitatively with scaling arguments and numerical computations, confirming the basic phenomenon, revealing design strategies, and suggesting a broad set of new possibilities for the manipulation and control of suspended particles.

We have studied the complete two-dimensional phase diagram of a core-shell microgel-laden fluid interface by synchronizing its compression with the deposition of the interfacial monolayer. Applying a new protocol, different positions on the substrate correspond to different values of the monolayer surface pressure and specific area. Analyzing the microstructure of the deposited monolayers, we discovered an isostructural solid-solid phase transition between two crystalline phases with the same hexagonal symmetry, but with two different lattice constants. The two phases corresponded to shell-shell and core-core inter-particle contacts, respectively; with increasing surface pressure the former mechanically failed enabling the particle cores to come into contact. In the phase-transition region, clusters of particles in core-core contacts nucleate, melting the surrounding shell-shell crystal, until the whole monolayer moves into the second phase. We furthermore measured the interfacial rheology of the monolayers as a function of the surface pressure using an interfacial microdisk rheometer. The interfaces always showed a strong elastic response, with a dip in the shear elastic modulus in correspondence with the melting of the shell-shell phase, followed by a steep increase upon the formation of a percolating network of the core-core contacts. These results demonstrate that the core-shell nature of the particles leads to a rich mechanical and structural behavior that can be externally tuned by compressing the interface, indicating new routes for applications, e.g. in surface patterning or emulsion stabilization.

We calculate here the force on a probe at a viscous, compressible interface, laden with soluble surfactant that equilibrates on a finite time scale. The motion of the probe through the interface drives variations in the surfactant concentration at the interface that in turn leads to a Marangoni flow that contributes to the force on the probe. We demonstrate that the Marangoni force on the probe depends non-trivially on the surface shear and dilatational viscosities of the interface indicating the difficulty in extracting these material properties from force measurements at compressible interfaces.

Using a microfluidic multi-inlet coflow system, we show the Rayleigh-Plateau instability of adjacent, closely spaced fluid threads to be collective. Although droplet size distributions and breakup frequencies are unaffected by cooperativity when fluid threads are identical, breakup frequencies and wavelengths between mismatched fluid threads become locked due to this collective instability. Locking narrows the size distribution of drops that are produced from dissimilar threads, and thus the polydispersity of the emulsion. These observations motivate a hypothesized two-step mechanism for high internal phase emulsification, wherein coarse emulsion drops are elongated into close-packed fluid threads, which break into smaller droplets via a collective Rayleigh Plateau instability. Our results suggest that these elongated fluid threads break cooperatively, whereupon wavelength-locking reduces the ultimate droplet polydispersity of high-internal phase emulsions, consistent with experimental observations.

Differential dynamic microscopy (DDM) is an emerging technique to measure the ensemble dynamics of colloidal and complex fluid motion using optical microscopy in systems that would otherwise be difficult to measure using other methods. To date, DDM has successfully been applied to linear space invariant imaging modes including bright-field, fluorescence, confocal, polarised, and phase-contrast microscopy to study diverse dynamic phenomena. In this work, we show for the first time how DDM analysis can be extended to dark-field imaging, i.e. a linear space variant (LSV) imaging mode. Specifically, we present a particle-based framework for describing dynamic image correlations in DDM, and use it to derive a correction to the image structure function obtained by DDM that accounts for scatterers with non-homogeneous intensity distributions as they move within the imaging plane. To validate the analysis, we study the Brownian motion of gold nanoparticles, whose plasmonic structure allows for nanometer-scale particles to be imaged under dark-field illumination, in Newtonian liquids. We find that diffusion coefficients of the nanoparticles can be reliably measured by dark-field DDM, even under optically dense concentrations where analysis via multiple-particle tracking microrheology fails. These results demonstrate the potential for DDM analysis to be applied to linear space variant forms of microscopy, providing access to experimental systems unavailable to other imaging modes.

We describe a microrheological strategy that enables sensitive surface shear rheology measurements of surfactant-laden interfaces, with the capacity to simultaneously visualize deforming interfaces. This technique utilizes a ferromagnetic microbutton probe pinned to a fluid-fluid interface, and actively torqued or forced with externally controlled electromagnets. Various modes of operation are possible: Small-amplitude oscillatory rotations, which provide frequency-dependent viscoelastic shear moduli; controlled torque (analogous to fixing shear stress); controlled rotation rate (analogous to fixing strain rate); and imposed force (analogous to active, translational microrheology). The circular shape of the probe ensures pure shear strains (when driven to rotate). We describe the experimental apparatus, its measurement limits and sources of error. We then highlight its versatility and capabilities with measurements on a variety of qualitatively distinct systems, including purely viscous monolayers, block-copolymer interfaces, aging and evolving interfaces, colloidal monolayers, and bulk rheometry of Newtonian and viscoelastic materials, with sample volumes as small as 2 μl.

We experimentally study the link between structure, dynamics and mechanical response of two-dimensional (2D) binary mixtures of colloidal microparticles spread at water/oil interfaces. The particles are driven into steady shear by a microdisk forced to rotate at a controlled angular velocity. The flow causes particles to layer into alternating concentric rings of small and big colloids. The formation of such layers is linked to the local, position-dependent shear rate, which triggers two distinct dynamical regimes: particles either move continuously ("Flowing") close to the microdisk, or exhibit intermittent "Hopping" between local energy minima farther away. The shear-rate-dependent surface viscosity of the monolayers can be extracted from a local interfacial stress balance, giving "macroscopic" flow curves whose behavior corresponds to the distinct microscopic regimes of particle motion. Hopping regions reveal a higher resistance to flow compared to the flowing regions, where spatial organization into layers reduces dissipation.

We describe a microfluidic system that enables direct visualization and measurement of diffusiophoretic migration of colloids in response to imposed solution gradients. Such measurements have proven difficult or impossible in macroscopic systems due to difficulties in establishing solution gradients that are sufficiently strong yet hydrodynamically stable. We validate the system with measurements of the concentration-dependent diffusiophoretic mobility of polystyrene colloids in NaCl gradients, confirming that diffusiophoretic migration velocities are proportional to gradients in the logarithm of electrolyte concentration. We then perform the first direct measurement of the concentration-dependent "solvophoretic" mobility of colloids in ethanol-water gradients, whose dependence on concentration and gradient strength was not known either theoretically or experimentally, but which our measurements reveal to be proportional to the gradient in the logarithm of ethanol mole fraction. Finally, we examine solvophoretic migration under a variety of qualitatively distinct chemical gradients, including solvents that are miscible or have finite solubility with water, an electrolyte for which diffusiophoresis proceeds down concentration gradients (unlike for most electrolytes), and a nonelectrolyte (sugar). Our technique enables the direct characterization of diffusiophoretic mobilities of various colloids under various solvent and solute gradients, analogous to the electrophoretic ζ-potential measurements that are routinely used to characterize suspensions. We anticipate that such measurements will provide the feedback required to test and develop theories for solvophoretic and diffusiophoretic migration and ultimately to the conceptual design and engineering of particles that respond in a desired way to their chemical environments.

Recent advancements in microfluidic technology have allowed for the generation and control of complex chemical gradients; however, few general techniques can measure these spatio-temporal concentration profiles without fluorescent labeling. Here we describe a Fabry-Perot interferometric technique, capable of measuring concentration profiles in situ, without any chemical label, by tracking Fringes of Equal Chromatic Order (FECO). The technique has a sensitivity of 10(-5) RIU, which can be used to track local solute changes of ~0.05% (w/w). The technique is spatially resolved (1 μm) and easily measures evolving concentration fields with ~20 Hz rate. Here, we demonstrate by measuring the binary diffusion coefficients of various solutes and solvents (and their concentration-dependence) in both free solution and in polyethylene glycol diacrylate (PEG-DA) hydrogels.

We evaluate the accuracy of local-density approximations (LDAs) using explicit molecular dynamics simulations of binary electrolytes comprised of equisized ions in an implicit solvent. The Bikerman LDA, which considers ions to occupy a lattice, poorly captures excluded volume interactions between primitive model ions. Instead, LDAs based on the Carnahan-Starling (CS) hard-sphere equation of state capture simulated values of ideal and excess chemical potential profiles extremely well, as well as the relationship between surface charge density and electrostatic potential. Excellent agreement between the EDL capacitances predicted by CS-LDAs and computed in molecular simulations is found even in systems where ion correlations drive strong density and free charge oscillations within the EDL, despite the inability of LDAs to capture the oscillations in the detailed EDL profiles.

Targeted delivery of therapeutic and imaging agents in the vascular compartment represents a significant hurdle in using nanomedicine for treating hemorrhage, thrombosis, and atherosclerosis. While several types of nanoparticles have been developed to meet this goal, their utility is limited by poor circulation, limited margination, and minimal targeting. Platelets have an innate ability to marginate to the vascular wall and specifically interact with vascular injury sites. These platelet functions are mediated by their shape, flexibility, and complex surface interactions. Inspired by this, we report the design and evaluation of nanoparticles that exhibit platelet-like functions including vascular injury site-directed margination, site-specific adhesion, and amplification of injury site-specific aggregation. Our nanoparticles mimic four key attributes of platelets, (i) discoidal morphology, (ii) mechanical flexibility, (iii) biophysically and biochemically mediated aggregation, and (iv) heteromultivalent presentation of ligands that mediate adhesion to both von Willebrand Factor and collagen, as well as specific clustering to activated platelets. Platelet-like nanoparticles (PLNs) exhibit enhanced surface-binding compared to spherical and rigid discoidal counterparts and site-selective adhesive and platelet-aggregatory properties under physiological flow conditions in vitro. In vivo studies in a mouse model demonstrated that PLNs accumulate at the wound site and induce ∼65% reduction in bleeding time, effectively mimicking and improving the hemostatic functions of natural platelets. We show that both the biochemical and biophysical design parameters of PLNs are essential in mimicking platelets and their hemostatic functions. PLNs offer a nanoscale technology that integrates platelet-mimetic biophysical and biochemical properties for potential applications in injectable synthetic hemostats and vascularly targeted payload delivery.

We report on a microfluidic AC-driven electrokinetic pump that uses Induced Charge Electro-Osmosis (ICEO) to generate on-chip pressures. ICEO flows occur when a bulk electric field polarizes a metal object to induce double layer formation, then drives electroosmotic flow. A microfabricated array of metal-dielectric Janus micropillars breaks the symmetry of ICEO flow, so that an AC electric field applied across the array drives ICEO flow along the length of the pump. When pumping against an external load, a pressure gradient forms along the pump length. The design was analyzed theoretically with the reciprocal theorem. The analysis reveals a maximum pressure and flow rate that depend on the ICEO slip velocity and micropillar geometry. We then fabricate and test the pump, validating our design concept by demonstrating non-local pressure driven flow using local ICEO slip flows. We varied the voltage, frequency, and electrolyte composition, measuring pump pressures of 15-150 Pa. We use the pump to drive flows through a high-resistance microfluidic channel. We conclude by discussing optimization routes suggested by our theoretical analysis to enhance the pump pressure.

We use direct numerical simulations of the Poisson-Nernst-Planck equations to study the charging kinetics of porous electrodes and to evaluate the predictive capabilities of effective circuit models, both linear and nonlinear. The classic transmission line theory of de Levie holds for general electrode morphologies, but only at low applied potentials. Charging dynamics are slowed appreciably at high potentials, yet not as significantly as predicted by the nonlinear transmission line model of Biesheuvel and Bazant. We identify surface conduction as a mechanism which can effectively "short circuit" the high-resistance electrolyte in the bulk of the pores, thus accelerating the charging dynamics and boosting power densities. Notably, the boost in power density holds only for electrode morphologies with continuous conducting surfaces in the charging direction.

Adding small fractions of cholesterol decreases the interfacial viscosity of dipalmitoylphosphatidylcholine (DPPC) monolayers by an order of magnitude per wt %. Grazing incidence X-ray diffraction shows that cholesterol at these small fractions does not mix ideally with DPPC but rather induces nanophase separated structures of an ordered, primarily DPPC phase bordered by a line-active, disordered, mixed DPPC-cholesterol phase. We propose that the free area in the classic Cohen and Turnbull model of viscosity is inversely proportional to the number of molecules in the coherence area, or product of the two coherence lengths. Cholesterol significantly reduces the coherence area of the crystals as well as the interfacial viscosity. Using this free area collapses the surface viscosity data for all surface pressures and cholesterol fractions to a universal logarithmic relation. The extent of molecular coherence appears to be a fundamental factor in determining surface viscosity in ordered monolayers.

Oscillatory microdisk rheometry was applied to evaluate the evolution of the viscoelastic properties at the surface of a film of an aqueous solution of poly(vinyl alcohol) (PVA) during drying. The drying rate was measured concurrently, based upon measurements of the variation of film thickness. A fully hydrolyzed PVA solution shows a constant drying rate, while a less hydrolyzed PVA solution exhibits a decreased drying rate in the latter part of the drying process, which occurred at the same time as an increase of the elastic modulus. We suggest that this difference in behavior is a consequence of the fact that both the configuration of the PVA molecule and the strength of interaction with water depend on the degree to which the PVA is hydrolyzed. The polymer concentration at the film surface can be estimated from the measured viscosity at the surface for the fully hydrolyzed PVA solution, and this result then can be compared with two theoretical calculations: one in which the polymer concentration is assumed to remain uniform throughout the film, and the other in which the polymer concentration distribution is determined via a one-dimensional diffusion model. This comparison suggests that the polymer is first concentrated locally near the surface but later in the drying process the distribution of polymer becomes increasingly uniform, possibly due to a spontaneously generated convective flow inside the film.

Polymers and Brownian rods have been predicted and observed to migrate across streamlines in flowing systems, potentially impacting rheological measurements, material processing, and microfluidic systems. In particular, gradients in cross-stream diffusivity give rise to concentration gradients across streamlines, in direct contrast with naive expectations from equilibrium statistical mechanics. Here, we provide a simple, physicially intuitive understanding for the subtle mechanisms that underlie this counter-intuitive effect. Specifically, we identify three minimal ingredients: (1) the cross-stream diffusivity of the solute must depend on its internal degrees of freedom, (2) internal degrees of freedom must be driven nonconservatively in a position-dependent manner, and (3) a mechanism must exist for the concentration to relax to a steady state spatial proflie. Significantly, we argue that the inhomogeneous steady-state distributions that have been observed do not result from directed cross-stream migration. In fact, we show that no migration occurs in systems without spatial relaxation. Rather, concentration gradients are established due to anisotropic rates of spatial relaxation, and the lack of directed cross-stream migration that would be found in a conservative system. We demonstrate with simple model systems analogous to Brownian rods, externally triggerable two-state molecules, and in externally imposed temperature or solute gradients, which affect steady concentration profiles beyond what would be expected from thermophoresis or diffusiophoresis. Our results have implications for separation strategies and for various microfluidic and processing flows. © 2014 American Institute of Chemical Engineers.

Foam and emulsion stability has long been believed to correlate with the surface shear viscosity of the surfactant used to stabilize them. Many subtleties arise in interpreting surface shear viscosity measurements, however, and correlations do not necessarily indicate causation. Using a sensitive technique designed to excite purely surface shear deformations, we make the most sensitive and precise measurements to date of the surface shear viscosity of a variety of soluble surfactants, focusing on SDS in particular. Our measurements reveal the surface shear viscosity of SDS to be below the sensitivity limit of our technique, giving an upper bound of order 0.01 μN·s/m. This conflicts directly with almost all previous studies, which reported values up to 10(3)-10(4) times higher. Multiple control and complementary measurements confirm this result, including direct visualization of monolayer deformation, for SDS and a wide variety of soluble polymeric, ionic, and nonionic surfactants of high- and low-foaming character. No soluble, small-molecule surfactant was found to have a measurable surface shear viscosity, which seriously undermines most support for any correlation between foam stability and surface shear rheology of soluble surfactants.

The self-assembly of polymer-based surfactants and nanoparticles on fluid-fluid interfaces is central to many applications, including dispersion stabilization, creation of novel 2D materials, and surface patterning. Very often these processes involve compressing interfacial monolayers of particles or polymers to obtain a desired material microstructure. At high surface pressures, however, even highly interfacially active objects can desorb from the interface. Methods of directly measuring the energy which keeps the polymer or particles bound to the interface (adsorption/desorption energies) are therefore of high interest for these processes. Moreover, though a geometric description linking adsorption energy and wetting properties through the definition of a contact angle can be established for rigid nano- or microparticles, such a description breaks down for deformable or aggregating objects. Here, we demonstrate a technique to quantify desorption energies directly, by comparing surface pressure-density compression measurements using a Wilhelmy plate and a custom-microfabricated deflection tensiometer. We focus on poly(ethylene oxide)-based polymers and nanoparticles. For PEO-based homo- and copolymers, the adsorption energy of PEO chains scales linearly with molecular weight and can be tuned by changing the subphase composition. Moreover, the desorption surface pressure of PEO-stabilized nanoparticles corresponds to the saturation surface pressure for spontaneously adsorbed monolayers, yielding trapping energies of ∼10(3) k(B)T.

At low mole fractions, cholesterol segregates into 10- to 100-nm-diameter nanodomains dispersed throughout primarily dipalmitoylphosphatidylcholine (DPPC) domains in mixed DPPC:cholesterol monolayers. The nanodomains consist of 6:1 DPPC:cholesterol "complexes" that decorate and lengthen DPPC domain boundaries, consistent with a reduced line tension, λ. The surface viscosity of the monolayer, ηs, decreases exponentially with the area fraction of the nanodomains at fixed surface pressure over the 0.1- to 10-Hz range of frequencies common to respiration. At fixed cholesterol fraction, the surface viscosity increases exponentially with surface pressure in similar ways for all cholesterol fractions. This increase can be explained with a free-area model that relates ηs to the pure DPPC monolayer compressibility and collapse pressure. The elastic modulus, G', initially decreases with cholesterol fraction, consistent with the decrease in λ expected from the line-active nanodomains, in analogy to 3D emulsions. However, increasing cholesterol further causes a sharp increase in G' between 4 and 5 mol% cholesterol owing to an evolution in the domain morphology, so that the monolayer is elastic rather than viscous over 0.1-10 Hz. Understanding the effects of small mole fractions of cholesterol should help resolve the controversial role cholesterol plays in human lung surfactants and may give clues as to how cholesterol influences raft formation in cell membranes.

We present a powerful and versatile technique that enables exquisite spatial and temporal control over local solution chemistry in microfluidic devices. Using a microscope and a UV lamp, we use projection lithography to photopolymerize thin (10-25 μm) hydrogel membrane "microwindows" (HMMs) into standard microfluidic devices. These microwindows are permeable to solute and solvent diffusion and to electric fields, yet act as rigid walls from the standpoint of fluid flow. Reservoirs of solution may thus be rapidly imposed, switched, and maintained on one side of a HMM using standard microfluidic techniques, provoking changes in solution conditions on the other side without active mixing, stirring, or diluting. We highlight three paradigmatic experimental capabilities enabled by HMMs: (1) rapid dialysis and swapping of solute and/or solvent, (2) stable and convection-free localized concentration gradients, and (3) local electric permeability. The functional versatility of hydrogel microwindow membranes, coupled with the ease and speed of their fabrication and integration into simple microchannels or multilayer devices, will open a variety of novel applications and studies in a broad range of fields.