Search

With the purpose of investigating new polymeric materials as potential flow modifiers for their future application in enhanced oil recovery (EOR), a series of amphiphilic poly(di(ethylene glycol) methyl ether methacrylate

Chain extension of linear AB diblock copolymer vesicles by seeded RAFT aqueous dispersion polymerization using a hydrophilic monomer C leads to polymerization-induced disassembly to form lower-order thermoresponsive ABC triblock copolymer nano-objects.

Behenyl methacrylate-based diblock and statistical copolymers are evaluated as additives for the crystal habit modification of a model wax (n-octacosane) in n-dodecane. The statistical copolymers more strongly influence the wax crystal morphology.

The ability to tune the behavior of temperature-responsive polymers and self-assembled nanostructures has attracted significant interest in recent years, particularly in regard to their use in biotechnological applications. Herein, well-defined poly(2-(diethylamino)ethyl methacrylate) (PDEAEMA)-based core-shell particles were prepared by RAFT-mediated emulsion polymerization, which displayed a lower-critical solution temperature (LCST) phase transition in aqueous media. The tertiary amine groups of PDEAEMA units were then utilized as functional handles to modify the core-forming block chemistry via a postpolymerization betainization approach for tuning both the cloud-point temperature (TCP) and flocculation temperature (TCFT) of these particles. In particular, four different sulfonate salts were explored aiming to investigate the effect of the carbon chain length and the presence of hydroxyl functionalities alongside the carbon spacer on the particle's thermoresponsiveness. In all cases, it was possible to regulate both TCP and TCFT of these nanoparticles upon varying the degree of betainization. Although TCP was found to be dependent on the type of betainization reagent utilized, it only significantly increased for particles betainized using sodium 3-chloro-2-hydroxy-1-propanesulfonate, while varying the aliphatic chain length of the sulfobetaine only provided limited temperature variation. In comparison, the onset of flocculation for betainized particles varied over a much broader temperature range when varying the degree of betainization with no real correlation identified between TCFT and the sulfobetaine structure. Moreover, experimental results were shown to partially correlate to computational oligomer hydrophobicity calculations. Overall, the innovative postpolymerization betainization approach utilizing various sulfonate salts reported herein provides a straightforward methodology for modifying the thermoresponsive behavior of soft polymeric particles with potential applications in drug delivery, sensing, and oil/lubricant viscosity modification.

International audience; We report the synthesis of redox- and pH-sensitive block copolymer micelles that contain chiral cores composed of helical poly(aryl isocyanide)s. Pentafluorophenyl (PFP) ester-containing micelles synthesised via nickel-catalysed coordination polymerisation-induced self-assembly (NiCCo-PISA) of helical poly(aryl isocyanide) amphiphilic diblock copolymers are modified post-polymerisation with various diamines to introduce cross-links and/or achieve stimulus-sensitive nanostructures. The successful introduction of the diamines is confirmed by Fourier-transform infrared spectroscopy (FT-IR), while the stabilisation effect of the cross-linking is explored by dynamic light scattering (DLS). The retention of the helicity of the core-forming polymer block is verified by circular dichroism (CD) spectroscopy and the stimuli-responsiveness of the nanoparticles towards a reducing agent (L-glutathione, GSH) and pH is evaluated by following the change in the size of the nanoparticles by DLS. These stimuli-responsive nanoparticles could find use in applications such as drug delivery, nanosensors or biological imaging.

The self-assembly of amphiphilic block copolymers has facilitated the preparation of a wide variety of nano-objects of diverse morphology. Ready access to these nanostructures has opened up new pos...

Proteins and peptides, built from precisely defined amino acid sequences, are an important class of biomolecules that play a vital role in most biological functions. Preparation of nanostructures through functionalization of natural, hydrophilic proteins/peptides with synthetic polymers or upon self-assembly of all-synthetic amphiphilic copolypept(o)ides and amino acid-containing polymers enables access to novel protein-mimicking biomaterials with superior physicochemical properties and immense biorelevant scope. In recent years, polymerization-induced self-assembly (PISA) has been established as an efficient and versatile alternative method to existing self-assembly procedures for the reproducible development of block copolymer nano-objects in situ at high concentrations and, thus, provides an ideal platform for engineering protein-inspired nanomaterials. In this review article, the different strategies employed for direct construction of protein-, (poly)peptide-, and amino acid-based nanostructures via PISA are described with particular focus on the characteristics of the developed block copolymer assemblies, as well as their utilization in various pharmaceutical and biomedical applications.

The dynamic interactions of membranes, particularly their fusion and fission, are critical for the transmission of chemical information between cells. Fusion is primarily driven by membrane tension built up through membrane deformation. For artificial polymersomes, fusion is commonly induced via the external application of a force field. Herein, fusion-promoted development of anisotropic tubular polymersomes (tubesomes) was achieved in the absence of an external force by exploiting the unique features of aqueous ring-opening metathesis polymerization-induced self-assembly (ROMPISA). The out-of-equilibrium tubesome morphology was found to arise spontaneously during polymerization, and the composition of each tubesome sample (purity and length distribution) could be manipulated simply by targeting different core-block degrees of polymerization (DPs). The evolution of tubesomes was shown to occur via fusion of “monomeric” spherical polymersomes, evidenced most notably by a step-growth-like relationship between the fraction of tubular to spherical nano-objects and the average number of fused particles per tubesome (analogous to monomer conversion and DP, respectively). Fusion was also confirmed by Förster resonance energy transfer (FRET) studies to show membrane blending and confocal microscopy imaging to show mixing of the polymersome lumens. We term this unique phenomenon polymerization-induced polymersome fusion, which operates via the buildup of membrane tension exerted by the growing polymer chains. Given the growing body of evidence demonstrating the importance of nanoparticle shape on biological activity, our methodology provides a facile route to reproducibly obtain samples containing mixtures of spherical and tubular polymersomes, or pure samples of tubesomes, of programmed length. Moreover, the capability to mix the interior aqueous compartments of polymersomes during polymerization-induced fusion also presents opportunities for its application in catalysis, small molecule trafficking, and drug delivery.

Cylinders are fascinating structures with uniquely high surface area, internal volume, and rigidity. On the nanoscale, a broad range of applications have demonstrated advantageous behavior of cylindrical micelles or bottlebrush polymers over traditional spherical nano-objects. In the past, obtaining pure samples of cylindrical nanostructures using polymer building blocks via conventional self-assembly strategies was challenging. However, in recent years, the development of advanced methods including polymerization-induced self-assembly, crystallization-driven self-assembly, and bottlebrush polymer synthesis has facilitated the easy synthesis of cylindrical nano-objects at industrially relevant scales. In this Perspective, we discuss these techniques in detail, highlighting the advantages and disadvantages of each strategy and considering how the cylindrical nanostructures that are obtained differ in their chemical structure, physical properties, colloidal stability, and reactivity. In addition, we propose future challenges to address in this rapidly expanding field.

Polymeric vesicles (or polymersomes) are hollow bilayer structures consisting of an inner aqueous compartment enclosed by a hydrophobic membrane. Vesicular constructs are ubiquitous in nature and perform a variety of functions by compartmentalizing molecules into disparate environments. For polymer chemists, the synthesis of vesicles can be readily accomplished using polymerization-induced self-assembly (PISA), whereby pure vesicle morphologies can be easily accessed by tuning initial reaction parameters. Research into polymersomes is motivated primarily by the fact that hydrophilic cargo such as drug molecules, DNA, or enzymes can be encapsulated and protected from the often harsh conditions of the surrounding environment. A key factor governing the capability of vesicles to retain and protect their cargo is the permeability of their hydrophobic membrane. Herein, we demonstrate that membrane permeability of enzyme-loaded epoxy-functionalized polymersomes synthesized by aqueous emulsion PISA can be modulated via epoxide ring-opening with various diamine cross-linkers and hydrophobic primary amines. In general, membrane cross-linking or amine conjugation resulted in increased polymersome membrane thickness. Membrane modification was also found to decrease permeability in all cases, as measured by enzymatically-catalysed oxidation of an externally administered substrate. Functionalization with hydrophobic amines resulted in the largest reduction in enzyme activity, suggesting significant blocking of substrate diffusion into the central aqueous compartment. This procedurally facile strategy yields meaningful insight into how the chemical structure of the membrane influences permeability and thus could be generally applied to the formulation of polymeric vesicles for therapeutic applications.

Aqueous ring-opening metathesis polymerization (ROMP) is a powerful tool for polymer synthesis under environmentally friendly conditions, functionalization of biomacromolecules, and preparation of polymeric nanoparticles via ROMP-induced self-assembly (ROMPISA). Although new water-soluble Ru-based metathesis catalysts have been developed and evaluated for their efficiency in mediating cross metathesis (CM) and ring-closing metathesis (RCM) reactions, little is known with regards to their catalytic activity and stability during aqueous ROMP. Here, we investigate the influence of solution pH, the presence of salt additives, and catalyst loading on ROMP monomer conversion and catalyst lifetime. We find that ROMP in aqueous media is particularly sensitive to chloride ion concentration and propose that this sensitivity originates from chloride ligand displacement by hydroxide or H2O at the Ru center, which reversibly generates an unstable and metathesis inactive complex. The formation of this Ru-(OH)n complex not only reduces monomer conversion and catalyst lifetime but also influences polymer microstructure. However, we find that the addition of chloride salts dramatically improves ROMP conversion and control. By carrying out aqueous ROMP in the presence of various chloride sources such as NaCl, KCl, or tetrabutylammonium chloride, we show that diblock copolymers can be readily synthesized via ROMPISA in solutions with high concentrations of neutral H2O (i.e., 90 v/v%) and relatively low concentrations of catalyst (i.e., 1 mol %). The capability to conduct aqueous ROMP at neutral pH is anticipated to enable new research avenues, particularly for applications in biological media, where the unique characteristics of ROMP provide distinct advantages over other polymerization strategies.

The interest in helix-containing nanostructures is currently growing as a consequence of their potential applications in areas such as nanomedicine, nanomaterial design, chiral recognition, and asymmetric catalysis. Herein, we present a facile and tunable one-pot methodology to achieve chiral nano-objects. The nickel-catalyzed coordination polymerization-induced self-assembly (NiCCo-PISA) of helical poly(aryl isocyanide) amphiphilic diblock copolymers was realized and allowed access to various nano-object morphologies (spheres, worm-like micelles, and polymersomes). The helicity of the core block was confirmed via circular dichroism (CD) spectroscopy for all morphologies, proving their chiral nature. Small-molecule uptake by the spherical nanoparticles was investigated by encapsulating Nile Red into the core of the spheres and subsequent transfer into aqueous media. The presence of a CD signal for the otherwise CD-inactive dye proved the chiral induction effect of the nano-objects' helical core. This demonstrates the potential of NiCCo-PISA to prepare nanoparticles for applications in nanomaterials, catalysis, and recognition.

The title of our recent paper should be corrected. The title should be changed from "Marcromolecular Architecture and Encapsulation of the Anticancer Drug Everolimus Control the Self-Assembly of Amphiphilic Polypeptide-Containing Hybrids" to "Macromolecular Architecture and Encapsulation of the Anticancer Drug Everolimus Control the Self-Assembly of Amphiphilic Polypeptide-Containing Hybrids". The Supporting Information was also changed to account for the correction of the title. © 2019 American Chemical Society. All rights reserved.

Poly(sarcosine) (PSar) is a non-ionic hydrophilic polypeptoid with numerous biologically relevant properties, making it an appealing candidate for the development of amphiphilic block copolymer nanostructures. In this work, the fabrication of poly(sarcosine)-based diblock copolymer nano-objects with various morphologies via aqueous reversible addition-fragmentation chain-transfer (RAFT)-mediated photoinitiated polymerization-induced self-assembly (photo-PISA) is reported. Poly(sarcosine) was first synthesized via ring-opening polymerization (ROP) of sarcosine N-carboxyanhydride, using high-vacuum techniques. A small molecule chain transfer agent (CTA) was then coupled to the active ω-amino chain end of the telechelic polymer for the synthesis of a poly(sarcosine)-based macro-CTA. Controlled chain-extensions of a commercially available water-miscible methacrylate monomer (2-hydroxypropyl methacrylate) were achieved via photo-PISA under mild reaction conditions, using PSar macro-CTA. Upon varying the degree of polymerization and concentration of the core-forming monomer, morphologies evolving from spherical micelles to worm-like micelles and vesicles were accessed, as determined by dynamic light scattering and transmission electron microscopy, resulting in the construction of a detailed phase diagram. The resistance of both colloidally stable empty vesicles and enzyme-loaded nanoreactors against degradation by a series of proteases was finally assessed. Overall, our findings underline the potential of poly(sarcosine) as an alternative corona-forming polymer to poly(ethylene glycol)-based analogues of PISA assemblies for use in various pharmaceutical and biomedical applications.

The synthesis of smart stimuli-responsive polymeric materials for nanomedicine applications has attracted the interest of a large number of scientists that focuses on the effective encapsulation of pharmaceutical compounds and control of their biodistribution. The development of multifunctional polymeric materials is mainly guided by the goal of achieving active compounds which selectively target the pathological sites, therefore minimizing systemic side effects. These materials are divided in two categories based on their mode of administration: the first is based on systemic administration, while the second relies on localized mode of action. Polymersomes are nanocarriers that are delivered through the blood compartment and are the best systems to carry both hydrophilic drugs in their interior hollow space or/and hydrophobic drugs encapsulated in their hydrophobic layer. Polymeric hydrogels on the other hand are systems for localized drug delivery of both kinds of pharmaceuticals, depending on their solubility. Even though a large number of polymeric materials that form either nanocarrier or hydrogel delivery systems has been investigated, a surprisingly small subset of these technologies has demonstrated potentially curative preclinical results, and fewer have progressed towards commercialization. One of the most promising classes of polymeric materials for drug delivery applications is polypeptides, which combine the properties of the conventional polymers with the 3D structure of natural proteins such as α-helices and β-sheets. In this article, the synthetic pathways followed to develop well-defined stimuli-responsive polymer delivery systems based on polypeptides that have been prepared through ring-opening polymerization (ROP) of N-carboxyanhydrides are reviewed, including a discussion of their in vivo and in vitro efficacy. This review is limited to systems presented over the last eighteen years.

Macromolecular architecture plays an important role in the self-assembly process of block copolymer amphiphiles. Herein, two series of stimuli-responsive amphiphilic 3-miktoarm star hybrid terpolypeptides and their corresponding linear analogues were synthesized exhibiting the same overall composition and molecular weight but different macromolecular architecture. The macromolecular architecture was found to be a key parameter in defining the morphology of the nanostructures formed in aqueous solutions as well as to alter the self-assembly behavior of the polymers independently of their composition. In addition, it was found that the assemblies prepared from the star-shaped polymers showed superior tolerance against enzymatic degradation due to the increased corona block density on the outer surface of the nanoparticles. Encapsulation of the hydrophobic anticancer drug Everolimus resulted in the formation of intriguing non-spherical and non-symmetric pH-responsive nanostructures, such as "stomatocytes" and "multi-compartmentalized suprapolymersomes", while the pH-triggered release of the drug was also investigated. Owing to the similarities of the developed "stomatocytes" with red blood cells, in combination with their pH-responsiveness and superior stability over enzymatic degradation, they are expected to present advanced drug delivery properties and have the ability to bypass several extra- and intracellular barriers to reach and effectively treat cancer cells.

Polymerization-induced self-assembly (PISA) has simplified the preparation of polymeric nanoparticles, expanding their commercial importance. Recently, PISA mediated via ring-opening metathesis polymerization (ROMPISA) has emerged as a powerful alternative to existing PISA methodologies. ROMPISA can be conducted under air in minutes, producing nano-object morphologies with unique characteristics. Herein, we highlight recent advances in this field.

[Image: see text] Aqueous polymerization-induced self-assembly (PISA) is a well-established methodology enabling in situ synthesis of polymeric nanoparticles of controllable morphology. Notably, PISA via ring-opening metathesis polymerization (ROMPISA) is an emerging technology for block copolymer self-assembly, mainly due to its high versatility and robustness. However, a limited number of monomers suitable for core-forming blocks in aqueous ROMPISA have been reported to date. In this work, we identified seven monomers for use as either corona- or core-forming blocks during aqueous ROMPISA by in silico calculation of relative hydrophobicity for corresponding oligomeric models. The predicted monomers were validated experimentally by conducting ROMPISA using our previously reported two-step approach. In addition to predictive data, our computational model was exploited to identify trends between polymer hydrophobicity and the morphology of the self-assembled nano-objects they formed. We expect that this methodology will greatly expand the scope of aqueous ROMPISA, as monomers can be easily identified based on the structure–property relationships observed herein.

The design and synthesis of novel poly(L-histidine)-grafted mesoporous silica nanoparticles (MSNs) by a surface-initiated ring-opening polymerization process (ROP) is reported. Using (3-aminopropyl)triethoxysilane (APTES) to introduce primary amino groups onto the MSN outer surface that work as ROP initiators, the nanoparticles were decorated with a uniform pH-sensitive poly(L-histidine) (PHis) shell. The method applied for the MSN functionalization, guaranteed that PHis chains were not grafted inside the MSNs' nanochannels. Successful grafting of the PHis chains was confirmed by FT-IR spectroscopy, TEM and TGA, while the controlled character of the polymerization was monitored by SEC analysis. Dynamic light scattering (DLS) and zeta potential analysis were used to reveal the pH-responsive nature of the polypeptide-gated MSNs. The role of the grafted PHis chains as pH-sensitive nanogates for the MSN pores was verified by drug loading and release studies, using the model anticancer drug doxorubicin (DOX). DOX was efficiently loaded within the nanochannels of the hybrid MSN@PHis nanostructures (approximately 90%), and was released in a relatively controlled pH-triggered manner. Overall, the described materials are promising candidates as nanocarriers for potential drug delivery applications.

The development of controlled/living polymerization methodologies has underpinned a rapid expanse in our understanding of amphiphilic block copolymer self-assembly. In solution, amphiphilic block copolymers spontaneously organize to form a diverse set of nano-objects, such as spherical and worm-like micelles or vesicles, that have proven to be exceptionally useful in the fields of nanomedicine, sensing, and catalysis, amongst others. The properties of such polymeric assemblies are strongly dependent on the chemical structure of their constituent block copolymer amphiphiles and, by extension, the methodology employed in their synthesis. In the past, research in this area has centered on the use of radical or anionic polymerization strategies to prepare amphiphilic block copolymers. However, continued efforts in the development of living ring-opening metathesis polymerization (ROMP) have facilitated access to new families of block copolymers, primarily based on the polynorbornene scaffold, that provide specific advantages over more traditional block copolymers comprised of (meth)acrylic or styrenic components. This review article provides a comprehensive summary of the synthesis of amphiphilic block copolymers by ROMP and the methods utilized for their self-assembly into ordered nanostructures in solution. In addition, biomedical and biotechnological applications of these ROMP-based block copolymer assemblies are addressed in view of their advantages over nanoparticulate formulations prepared by other methods. Ultimately, this review aims to encourage the utilization of ROMP as a versatile and direct approach to create advanced functional nanomaterials by providing a deep understanding of theoretical and practical aspects relating to its implementation.

Macromolecular architecture plays an important role in the self-assembly process of block copolymer amphiphiles. Herein, two series of stimuli-responsive amphiphilic 3-miktoarm star hybrid terpolypeptides and their corresponding linear analogues were synthesized exhibiting the same overall composition and molecular weight but different macromolecular architecture. The macromolecular architecture was found to be a key parameter in defining the morphology of the nanostructures formed in aqueous solutions as well as to alter the self-assembly behavior of the polymers independently of their composition. In addition, it was found that the assemblies prepared from the star-shaped polymers showed superior tolerance against enzymatic degradation due to the increased corona block density on the outer surface of the nanoparticles. Encapsulation of the hydrophobic anticancer drug Everolimus resulted in the formation of intriguing non-spherical and non-symmetric pH-responsive nanostructures, such as "stomatocytes" and "multi-compartmentalized suprapolymersomes", while the pH-triggered release of the drug was also investigated. Owing to the similarities of the developed "stomatocytes" with red blood cells, in combination with their pH-responsiveness and superior stability over enzymatic degradation, they are expected to present advanced drug delivery properties and have the ability to bypass several extra- and intracellular barriers to reach and effectively treat cancer cells.

Understanding, predicting, and controlling the self-assembly behavior of stimuli-responsive block copolymers remains a pertinent challenge. As such, the copolymer blending protocol provides an accessible methodology for obtaining a range of intermediate polymeric nanostructures simply by blending two or more block copolymers in the desired molar ratio to target specific stimuli-responsiveness. Herein, thermoresponsive diblock copolymers are blended in various combinations to investigate whether the resultant cloud point temperature can be modulated by simple manipulation of the molar ratio. Thermoresponsive amphiphilic diblock copolymers composed of statistical poly(n-butyl acrylate-co-N,N-dimethylacrylamide) core-forming blocks and four different thermoresponsive corona-forming blocks, namely poly(diethylene glycol monomethyl ether methacrylate) (p(DEGMA)), poly(N-isopropylacrylamide), poly(N,N-diethylacrylamide), and poly(oligo(ethylene glycol) monomethyl ether methacrylate) (p(OEGMA)) are selected for evaluation. Using variable temperature turbidimetry, the thermoresponsive behavior of blended diblock copolymer self-assemblies is assessed and compared to the thermoresponsive behavior of the constituent pure diblock copolymer micelles to determine whether comicellization is achieved and more significantly, whether the two blended corona-forming thermoresponsive blocks exhibit cooperative behavior. Interestingly, blended diblock copolymer micelles composed of p(DEGMA)/p(OEGMA) mixed coronae display cooperative behavior, highlighting the potential of copolymer blending for the preparation of stimuli-responsive nanomaterials in applications such as oil recovery, drug delivery, biosensing, and catalysis.

We report an in silico method to predict monomers suitable for use in polymerization-induced self-assembly (PISA). By calculating the dependence of LogPoct/surface area (SA) on the length of the growing polymer chain, the change in hydrophobicity during polymerization was determined. This allowed for evaluation of the capability of a monomer to polymerize to form self-assembled structures during chain extension. Using this method, we identified five new monomers for use in aqueous PISA via reversible addition-fragmentation chain transfer (RAFT) polymerization, and confirmed that these all successfully underwent PISA to produce nanostructures of various morphologies. The results obtained using this method correlated well with and predicted the differences in morphology obtained from the PISA of block copolymers of similar molecular weight but different chemical structures. Thus, we propose this method can be utilized for the discovery of new monomers for PISA and also the prediction of their self-assembly behavior.

Photoinitiated polymerization-induced self-assembly (photo-PISA) is an efficient approach to predictably prepare polymeric nanostructures with a wide range of morphologies. Given that this process can be performed at high concentrations and under mild reaction conditions, it has the potential to have significant industrial scope. However, given that the majority of industrial (and more specifically biotechnological) formulations contain mixtures of polymers and surfactants, the effect of such surfactants on the PISA process is an important consideration. Thus, to expand the scope of the methodology, the effect of small molecule surfactants on the PISA process, specifically for the preparation of unilamellar vesicles, was investigated. Similar to aqueous photo-PISA findings in the absence of surfactant molecules, the originally targeted vesicular morphology was retained in the presence of varying concentrations of non-ionic surfactants, while a diverse set of lower-order morphologies was observed for ionic surfactants. Interestingly, a critical micelle concentration (CMC)-dependent behavior was detected in the case of zwitterionic detergents. Additionally, tunable size and membrane thickness of vesicles were observed by using different types and concentration of surfactants. Based on these findings, a functional channel-forming membrane protein (OmpF porin), stabilized in aqueous media by surfactant molecules, was able to be directly inserted into the membrane of vesicles during photo-PISA. Our study demonstrates the potential of photo-PISA for the direct formation of protein–polymer complexes and highlights how this method could be used to design biomimicking polymer/surfactant nanoreactors.

The preparation of a functional fluorine-containing block copolymer using reversible addition–fragmentation chain-transfer dispersion polymerization in DMSO as a “platform/scaffold” is explored. The nanostructures, comprised of poly(ethyleneglycol)-b-poly(pentafluorophenyl methacrylate) or PEG-b-P(PFMA), are formulated via photo-initiated polymerization-induced selfassembly (PISA) followed by post-polymerization modification using different primary amines. A combination of light scattering and microscopy techniques are used to characterize the resulting morphologies. It is found that upon varying the degree of polymerization of the core-forming block of PFMA, only uniform spheres (with textured surfaces) are obtained. These nanostructures are subsequently modified by cross-linking using a non-responsive and a redox-responsive diamine, thus imparting stability to the particles in water. In response to intracellular glutathione (GSH) concentration, destabilization of the micelles occurs as evidenced by dynamic light scattering. The welldefined size, inherent reactivity of the nanoparticles toward nucleophiles, and GSH-responsiveness of the nanospheres make them ideal scaffolds for drug delivery to intracellular compartments with reductive environments.

The preparation of a functional fluorine-containing block copolymer using reversible addition-fragmentation chain-transfer dispersion polymerization in DMSO as a "platform/scaffold" is explored. The nanostructures, comprised of poly(ethyleneglycol)-b-poly(pentafluorophenyl methacrylate) or PEG-b-P(PFMA), are formulated via photo-initiated polymerization-induced self-assembly (PISA) followed by post-polymerization modification using different primary amines. A combination of light scattering and microscopy techniques are used to characterize the resulting morphologies. It is found that upon varying the degree of polymerization of the core-forming block of PFMA, only uniform spheres (with textured surfaces) are obtained. These nanostructures are subsequently modified by cross-linking using a non-responsive and a redox-responsive diamine, thus imparting stability to the particles in water. In response to intracellular glutathione (GSH) concentration, destabilization of the micelles occurs as evidenced by dynamic light scattering. The well-defined size, inherent reactivity of the nanoparticles toward nucleophiles, and GSH-responsiveness of the nanospheres make them ideal scaffolds for drug delivery to intracellular compartments with reductive environments.

Water-soluble and amphiphilic polymers are of great interest to industry and academia, as they can be used in applications such as biomaterials and drug delivery. Whilst ring-opening metathesis polymerization (ROMP) is a fast and functional group tolerant methodology for the synthesis of a wide range of polymers, its full potential for the synthesis of water-soluble polymers has yet to be realized. To address this, we report a general strategy for the synthesis of block copolymers in aqueous milieu using a commercially available ROMP catalyst and a macroinitiator approach. This allows for excellent control in the preparation of block copolymers in water. If the second monomer is chosen such that it forms a water-insoluble polymer, polymerization-induced self-assembly (PISA) occurs and a variety of self-assembled nano-object morphologies can be accessed.

The synthesis of smart stimuli-responsive polymeric materials for nanomedicine applications has attracted the interest of a large number of scientists that focuses on the effective encapsulation of pharmaceutical compounds and control of their biodistribution. The development of multifunctional polymeric materials is mainly guided by the goal of achieving active compounds which selectively target the pathological sites, therefore minimizing systemic side effects. These materials are divided in two categories based on their mode of administration: the first is based on systemic administration, while the second relies on localized mode of action. Polymersomes are nanocarriers that are delivered through the blood compartment and are the best systems to carry both hydrophilic drugs in their interior hollow space or/and hydrophobic drugs encapsulated in their hydrophobic layer. Polymeric hydrogels on the other hand are systems for localized drug delivery of both kinds of pharmaceuticals, depending on their solubility. Even though a large number of polymeric materials that form either nanocarrier or hydrogel delivery systems has been investigated, a surprisingly small subset of these technologies has demonstrated potentially curative preclinical results, and fewer have progressed towards commercialization. One of the most promising classes of polymeric materials for drug delivery applications is polypeptides, which combine the properties of the conventional polymers with the 3D structure of natural proteins such as α-helices and β-sheets. In this article, the synthetic pathways followed to develop well-defined stimuli-responsive polymer delivery systems based on polypeptides that have been prepared through ring-opening polymerization (ROP) of N-carboxyanhydrides are reviewed, including a discussion of their in vivo and in vitro efficacy. This review is limited to systems presented over the last eighteen years. © 2018 Elsevier B.V.

A series of novel multi-responsive disulfide cross-linked polypeptide nanogels has been synthesized by a one-step ring-opening polymerization process. The pH-responsive core of the prepared nanogels was based on poly(L-histidine), the difunctional N-carboxy anhydride of l-cystine (l-Cys-NCA) was used as a reduction-cleavable cross-linking agent, while the outer hydrophilic corona was comprised of a poly(ethylene oxide) block. Extensive molecular characterization studies were conducted in order to confirm the formation of the desired polymeric nanostructures and also to prove their responsiveness to external stimuli within the physiological values of healthy and cancer tissues. Furthermore, the disruption of the disulfide-bond linkages between the polymeric chains was achieved by the presence of the reductive tripeptide glutathione (GSH), leading to size variations that were monitored by dynamic light scattering (DLS) and size-exclusion chromatography (SEC). “Stealth” properties of the formed nanostructures were examined by zeta potential measurements. The described nanogels are clearly promising candidates for drug delivery applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 1278–1288

Enzyme loading of polymersomes requires permeability to enable them to interact with the external environment, typically requiring addition of complex functionality to enable porosity. Herein, we describe a synthetic route toward intrinsically permeable polymersomes loaded with functional proteins using initiator-free visible light-mediated polymerization-induced self-assembly (photo-PISA) under mild, aqueous conditions using a commercial monomer. Compartmentalization and retention of protein functionality was demonstrated using green fluorescent protein as a macromolecular chromophore. Catalytic enzyme-loaded vesicles using horseradish peroxidase and glucose oxidase were also prepared and the permeability of the membrane toward their small molecule substrates was revealed for the first time. Finally, the interaction of the compartmentalized enzymes between separate vesicles was validated by means of an enzymatic cascade reaction. These findings have a broad scope as the methodology could be applied for the encapsulation of a large range of macromolecules for advancements in the fields of nanotechnology, biomimicry, and nanomedicine.\ud \ud

The design and synthesis of novel poly(l-histidine)-grafted mesoporous silica nanoparticles (MSNs) by a surface-initiated ring-opening polymerization process (ROP) is reported. Using (3-aminopropyl)triethoxysilane (APTES) to introduce primary amino groups onto the MSN outer surface that work as ROP initiators, the nanoparticles were decorated with a uniform pH-sensitive poly(l-histidine) (PHis) shell. The method applied for the MSN functionalization, guaranteed that PHis chains were not grafted inside the MSNs' nanochannels. Successful grafting of the PHis chains was confirmed by FT-IR spectroscopy, TEM and TGA, while the controlled character of the polymerization was monitored by SEC analysis. Dynamic light scattering (DLS) and zeta potential analysis were used to reveal the pH-responsive nature of the polypeptide-gated MSNs. The role of the grafted PHis chains as pH-sensitive nanogates for the MSN pores was verified by drug loading and release studies, using the model anticancer drug doxorubicin (DOX). DOX was efficiently loaded within the nanochannels of the hybrid MSN@PHis nanostructures (approximately 90%), and was released in a relatively controlled pH-triggered manner. Overall, the described materials are promising candidates as nanocarriers for potential drug delivery applications. © The Royal Society of Chemistry 2016.

A series of novel multi-responsive disulfide cross-linked polypeptide nanogels has been synthesized by a one-step ring-opening polymerization process. The pH-responsive core of the prepared nanogels was based on poly(L-histidine), the difunctional N-carboxy anhydride of l-cystine (l-Cys-NCA) was used as a reduction-cleavable cross-linking agent, while the outer hydrophilic corona was comprised of a poly(ethylene oxide) block. Extensive molecular characterization studies were conducted in order to confirm the formation of the desired polymeric nanostructures and also to prove their responsiveness to external stimuli within the physiological values of healthy and cancer tissues. Furthermore, the disruption of the disulfide-bond linkages between the polymeric chains was achieved by the presence of the reductive tripeptide glutathione (GSH), leading to size variations that were monitored by dynamic light scattering (DLS) and size-exclusion chromatography (SEC). "Stealth" properties of the formed nanostructures were examined by zeta potential measurements. The described nanogels are clearly promising candidates for drug delivery applications. © 2015 Wiley Periodicals, Inc.

Covalent PEGylation of biologics has been widely employed to reduce immunogenicity, while improving stability and half-life in vivo. This approach requires covalent protein modification, creating a new entity. An alternative approach is stabilization by encapsulation into polymersomes; however this typically requires multiple steps, and the segregation requires the vesicles to be permeable to retain function. Herein, we demonstrate the one-pot synthesis of therapeutic enzyme-loaded vesicles with size-selective permeability using polymerization-induced self-assembly (PISA) enabling the encapsulated enzyme to function from within a confined domain. This strategy increased the proteolytic stability and reduced antibody recognition compared to the free protein or a PEGylated conjugate, thereby reducing potential dose frequency and the risk of immune response. Finally, the efficacy of encapsulated l-asparaginase (clinically used for leukemia treatment) against a cancer line was demonstrated, and its biodistribution and circulation behavior in vivo was compared to the free enzyme, highlighting this methodology as an attractive alternative to the covalent PEGylation of enzymes., ASNS was encapsulated into size-selective PISA vesicles. Protection from both proteases and antibody recognition was achieved, yet the enzyme retained activity and efficacy against a cancer cell line.