Search

Polymer-matrix composites containing conductive nanoparticles are a potential means for achieving an appealing combination of multifunctional properties for their use as structural parts in the aerospace field. Carbon nanofibers (CNFs) have been being looked forward to as the next generation of new and avant-garde aircraft structures because they are exceptionally coveted competitor materials to replace traditional metal components for lightning strike protection. In this regard, nanocomposites at low concentration of CNFs ranging from 0.05% up to 2% by wt to impart electron conduction in tetrafunctional epoxy resin have been prepared and characterized. The aim of this work concerns the use of Tunneling AFM (TUNA) as revolutionary tool able to correlate the electrical current map with the correspondent local morphology of CNF/resins. TUNA technique has proven to play a leading role in the identification of current paths and electrical interconnections, even without altering the morphology with usual treatments employed to create electrical contacts to the ground. Summing up, the good electrical performance together with the high mechanical properties due to a conductive cross-linked network of CNFs inside the resin demonstrate a charming applicative potential for the formulated nanocomposites as structural materials capable to provide a safe conductive path on the exterior skin, preventing serious damage to the aircraft.

Epoxy nanocomposites fulfill tight and compelling industrial requirements in the field of structural material for aeronautical applications. In this paper the development and characterization of nanocomposites obtained by filling tetrafunctional epoxy resin (tetraglycidyl methylene dianiline cured with the aromatic diamine 4,4’-diaminodiphenylsulfone, named T20BD) with carbon nanofibers (CNF) is discussed. A filler amount ranging from 0.05% to 2%wt is considered. The DC volume conductivity and the dielectric characteristics (ϵ’) of the nanocomposites in the frequency range 100Hz-1MHz are analyzed and compared with those of the pure resin. Atomic force microscopy, mapping the local topography by means of tunneling effect, is used for recording the electrical percolation path for nanocomposites. In particular, the case 1.3wt% of CNF filled nanocomposites that exhibits a stable behavior of the conductivity in the full investigated frequency range, is here reported. The developed filled epoxy used in carbon fiber reinforced composites, shows enhanced electrical properties leading to better electromagnetic (EM) performances in EM coatings, EM shields and filters or radar absorber materials (RAMs).

In light of the ever‐increasing demand for lightweight materials suitable for heat transport applications, many efforts are devoted to enhancing the thermal properties of polymer‐based nanocomposites via nanofillers. In the present study, nanocomposites based on epoxy resin, including 3 wt% of multiwalled carbon nanotubes (MWCNTs), are prepared and then thermally characterized. More in detail, it is investigated the temperature increase over time, due to the Joule heating effect, when different voltage values (70, 80, and 90 V) are applied to the specimens. These experimental measures validate a simulation study performed with commercial software (COMSOL Multiphysics®), which allows the investigation of several thermal aspects of the Joule heating. A perfect agreement between experimental and modeling data is found. This means that, in support of experimental activities, modern computational methods can add knowledge in materials science to discover new advanced materials or investigate the existing ones in depth. The present case study examines the potential use of nano‐reinforced polymeric materials for thermal applications involving the Joule effect. [ABSTRACT FROM AUTHOR]

Due to their remarkable intrinsic physical properties, carbon nanotubes (CNTs) can enhance mechanical properties and confer electrical and thermal conductivity to polymers currently being investigated for use in advanced applications based on thermal management. An epoxy resin filled with varying concentrations of CNTs (up to 3 wt%) was produced and experimentally characterized. The electrical percolation curve identified the following two critical filler concentrations: 0.5 wt%, which is near the electrical percolation threshold (EPT) and suitable for exploring mechanical and piezoresistive properties, and 3 wt% for investigating thermo-electric properties due to the Joule effect with applied voltages ranging from 70 V to 200 V. Near the electrical percolation threshold (EPT), the CNT concentration in epoxy composites forms a sparse, sensitive network ideal for deformation sensing due to significant changes in electrical resistance under strain. Above the EPT, a denser CNT network enhances electrical and thermal conductivity, making it suitable for Joule heating applications. Numerical models were developed using multiphysics simulation software. Once the models have been validated with experimental data, as a perfect agreement is found between numerical and experimental results, a simulation study is performed to investigate additional physical properties of the composites. Furthermore, a statistical approach based on the design of experiments (DoE) was employed to examine the influence of certain thermal parameters on the final performance of the materials. The purpose of this research is to promote the use of contemporary statistical and computational techniques alongside experimental methods to enhance understanding of materials science. New materials can be identified through these integrated approaches, or existing ones can be more thoroughly examined. [ABSTRACT FROM AUTHOR]

Epoxy resin based on carbon nanotubes with heating properties is studied to tune its heating performance by changing the applied voltage value. The developed self‐heating device, able to heat to high temperatures in a short time, can be applied in various areas. The electro‐thermal investigation shows the presence of both positive temperature coefficient (PTC) and negative temperature coefficient (NTC) behaviors with a predominance of NTC trend neat to the glass transition temperature of the epoxy matrix. [ABSTRACT FROM AUTHOR]

The current state of the art on material science emphasizes recent research efforts aimed at designing novel materials characterized by low-density and advanced properties. The present article reports the experimental, theoretical and simulation results on the thermal behavior of 3D printed discs. Filaments of pure poly (lactic acid) PLA and filled with 6 wt% of graphene nanoplatelets (GNPs) are used as feedstocks. Experiments indicate that the introduction of graphene enhances the thermal properties of the resulting materials since the conductivity passes from the value of 0.167 [W/mK] for unfilled PLA to 0.335 [W/mK] for reinforced PLA, which corresponds to a significantly improvement of 101%. Exploiting the potential of 3D printing, different air cavities have been intentionally designed to develop new lightweight and more cost-effective materials without compromising their thermal performances. Furthermore, some cavities are equal in volume but different in the geometry; it is necessary to investigate how this last characteristic and its possible orientations affect the overall thermal behavior compared to that of an air-free specimen. The influence of air volume is also investigated. Experimental results are supported by theoretical analysis and simulation studies based on the finite element method. The results aim to be a valuable reference resource in the field of design and optimization of lightweight advanced materials. [ABSTRACT FROM AUTHOR]

To link to full-text access for this article, visit this link: http://dx.doi.org/10.1016/j.ydbio.2008.06.006 Byline: Vincenzo Cavalieri (a), Maria Di Bernardo (b), Letizia Anello (b), Giovanni Spinelli (a) Keywords: Homeodomain; Aboral ectoderm; cis-Regulatory module; Gene transfer; Otx; Sox; Myb; Sea urchin embryo; Chromatin ImmunoPrecipitation Abstract: Embryonic development is coordinated by networks of evolutionary conserved regulatory genes encoding transcription factors and components of cell signalling pathways. In the sea urchin embryo, a number of genes encoding transcription factors display territorial restricted expression. Among these, the zygotic Hbox12 homeobox gene is transiently transcribed in a limited number of cells of the animal-lateral half of the early Paracentrotus lividus embryo, whose descendants will constitute part of the ectoderm territory. To obtain insights on the regulation of Hbox12 expression, we have explored the cis-regulatory apparatus of the gene. In this paper, we show that the intergenic region of the tandem Hbox12 repeats drives GFP expression in the presumptive aboral ectoderm and that a 234 bp fragment, defined aboral ectoderm (AE) module, accounts for the restricted expression of the transgene. Within this module, a consensus sequence for a Sox factor and the binding of the Otx activator are both required for correct Hbox12 gene expression. Spatial restriction to the aboral ectoderm is achieved by a combination of different repressive sequence elements. Negative sequence elements necessary for repression in the endomesoderm map within the most upstream 60 bp region and nearby the Sox binding site. Strikingly, a Myb-like consensus is necessary for repression in the oral ectoderm, while down-regulation at the gastrula stage depends on a GA-rich region. These results suggest a role for Hbox12 in aboral ectoderm specification and represent our first attempt in the identification of the gene regulatory circuits involved in this process. Author Affiliation: (a) Dipartimento di Biologia Cellulare e dello Sviluppo A. Monroy, Universita di Palermo, Viale delle Scienze Edificio 16, 90128 Palermo, Italy (b) Istituto di Biomedicina e Immunologia Molecolare A. Monroy-CNR, via Ugo La Malfa 153, 90146 Palermo, Italy Article History: Received 25 October 2007; Revised 23 May 2008; Accepted 3 June 2008

In the sea urchin embryo skeletogenesis is the result of a complex series of molecular and cellular events that coordinate the morphogenetic process. Past and recent evidence strongly indicate that skeletal initiation and growth are strictly dependent on signals emanating from the oral ectodermal wall. As previously suggested, Orthopedia (Otp), a homeodomain-containing transcription factor specifically expressed in a small subset of oral ectoderm cells, might be implicated in this signaling pathway. In this study, we utilize three different strategies to address the issue of whether Otp is an upstream regulator of sketelogenesis. We describe the effects of microinjection of Otp morpholino-substituted antisense oligonucleotides and dominant-negative Otp-engrailed mRNA in Paracentrotus lividus embryos. We demonstrate that inhibition of Otp expression completely abolishes skeletal synthesis. By contrast, coinjection of Otp mRNA and the morpholino antisense oligonucleotide specifically rescues the skeletogenic program. In addition, localized ectodermal expression of the Otp-GFP fusion gene construct driven by the hatching enzyme promoter, induces ectopic and abnormal spiculogenesis. We further show that an indirect target of this homeoprotein is the skeletogenic specific gene SM30, whose expression is known to be under the strict control of the oral ectoderm territory. Based on these results, we conclude that Otp triggers the ectoderm-specific signal that promotes skeletogenesis. Keywords: Orthopedia homeobox; Sea urchin embryo; Skeletogenesis; Morpholino oligonucleotides