Search

Purpose: This prospective study evaluated the marginal bone level and periodontal parameters 6 years after placement of a convergent transmucosal neck implant. Materials and Methods: In total, 71 implants were placed in 60 patients. Of these, 52 implants were placed with a flapless technique and with the convergent neck exposed by 1 mm (early and delayed placement), while 19 implants were placed immediately after extraction (immediate placement). At least 3 months after insertion, customized abutments were applied and provisional resin crowns were cemented, while being careful to prevent any tissue compression. After 3 weeks, definitive metal-ceramic crowns were designed with the finish line at the soft tissue level and free from any compression. The implant survival rate at 6 years, marginal bone level changes (ΔMBL, mm), and Pink Esthetic Score (PES) were evaluated. Gingival phenotype was determined before the implant surgeries (thin/thick). A three-level hierarchical model was examined with a random intercept and random slope on follow-up time at the patient level and a random intercept at the implant level. Results: In all, 57 patients with 67 implants reached the 6-year point; 3 patients (5.0%) dropped out. The implant survival rate was 100%. ΔMBL from baseline to 24 months was 0.58 mm (95% CI: 0.48, 0.68), while ΔMBL from 24 to 72 months was 0.33 mm (95% CI: 0.19, 0.47). PES improved steadily from 6 to 48 months (+0.96; 95% CI: 0.71, 1.20), with overall stability at 72 months. No correlation between MBL and PES was observed. A significant association was found between thick gingival phenotype and less MBL variation. Greater implant diameter offered more MBL stability after 3 years but resulted in lower PES values. Conclusions: The use of convergent transmucosal neck implants placed with a flapless transmucosal approach with the crown margin positioned at the gingival level preserved marginal bone and guided gingival morphology for up to 72 months. The gingival phenotype was the parameter that most affected the soft and hard tissues. In the long term, implant placement timing was not related to MBL. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate the survival rate and marginal bone level (MBL) of calcium phosphate-blasted acid-etched titanium implants placed in a cohort of patients with different ridges after a follow-up period of at least 10 years. Materials and Methods: A total of 61 patients with a minimum implant follow-up of 10 years were selected for this historical prospective, best clinical practice cohort study. Between 2009 and 2012, 121 titanium implants were placed using a flap, flapless, or postextractive technique. The implant placement timing was performed according to pre-extractive diagnosis and divided into immediate (immediately after tooth extraction with an absence of infection), early (within 2 to 3 months with an acute periapical lesion), delayed (6 to 12 months from extraction with a large periapical infection), or late (> 12 months from extraction with healed edentulous ridges). All implants were loaded after 3 months with provisional and definitive cemented restorations. Periapical radiographs were taken before implant insertion and at 3, 6, 12, 24, 36, 48, 96, and 120 months (T3, T6, T12, T24, T36, T48, T96, and T120, respectively). The MBL was calculated in single blind by an additional examiner. Linear logistic regression was performed to analyze statistically significant differences in relation to different operative variables at all evaluation times. Multilevel mixed logistic regression was made to evaluate the factors associated to MBL at 10 years (T120). Results: After 10 years, 47 patients and 92 implant restorations were analyzed, showing that 88 implants (95.6%) survived and 4 implants (4.4%) failed. The cumulative drop-out rate was 22.1%. Loosening and/or mobility was observed in a total of 9 abutments (9.7%) during the observational time. No other complications were reported. Implants placed with a flapless technique revealed a similar MBL to those placed with a flap technique. No significant differences were observed between the surgical techniques at T96 and T120. Immediate and early implants revealed a more stable MBL than both delayed and late implants up to T48. At longer evaluation times (T96 and T120), the MBL values were not statistically significant (P > .05). Narrower diameter implants (3.5 mm) revealed a higher bone loss when compared to the 4.1-mm- and 5.0-mm-diameters, especially in the first year from implant insertion (from T3 to T12) and at longer follow-up (T36 and T48). After that, the difference was reduced. Multilevel analysis showed that none of these variables appear to significantly influence MBL at 120 months. Conclusions: MBL was not influenced by surgical technique or implant placement timing after 10 years. Maintaining a strict occlusal and hygiene control created the conditions to preserve bone integrity and achieve a high implant survival rate. [ABSTRACT FROM AUTHOR]

Aim: The osteogenic potential of new premixed calcium‐silicate‐containing bioceramic sealers (Ca‐Si sealers) was tested with porcine vascular wall‐mesenchymal stem cells (pVW‐MSCs). Methodology: Two Ca‐Si‐containing sealers: Ceraseal (MetaBiomed, Cheong‐si, South Korea) and AH Plus Bioceramic (Maruchi, Wonju‐si, South Korea), and an epoxy resin sealer (AH Plus; Dentsply, Konstanz, Germany) as a control, were prepared according to the manufacturers' indications. All samples were allowed to set for 100% of their setting time in a sterile humid cabinet at 37°C and 95% relative humidity. pVW‐MSC seeding efficiency and osteogenic differentiation were analysed as marker of gene/protein expression for up to 12 days. Mineralization assay and immunofluorescence staining were performed and evaluated over a period of 21 days. Statistical analyses were conducted using one‐way analysis of variance (p <.05). Additional samples were prepared and stored under the same conditions and inspected using an environmental scanning electron microscope equipped with an energy dispersive X‐ray spectroscopy system. Results: Significantly higher cell seeding efficiency (p <.05) was observed for both Ca‐Si sealers from day 8. pVW‐MSCs showed a significant shift towards the osteogenic lineage only when seeded in contact with Ca‐Si sealers. Gene expression of osteopontin was upregulated significantly. Collagen I and osteocalcin were clearly expressed by cells in contact with Ca‐Si sealers. Mineralization granules were observed in Alizarin red assays and confocal laser scanning microscopy analysis of both Ca‐Si sealers. No gene expression or granule mineralization were observed on the epoxy resin sealer. Conclusions: Premixed Ca‐Si sealers displayed a higher potential for osteogenic activity on pVW‐MSCs. Epoxy resin sealer was unable to induce any osteogenic activity. The properties of both Ca‐Si sealers suggest their potential as osteoinductive platforms for vascular MSCs in periapical bone. [ABSTRACT FROM AUTHOR]

The study reviewed the state of the art of the clinical use of a convergent-neck-designed Prama implant. This implant was introduced approximately 10 years ago and was characterized by a specific and unique convergent neck with a microtextured surface (UTM surface) and Zirconium Titanium (ZirTi) implant body surface. The neck design was developed to adopt the biologically oriented preparation technique (BOPT). A critical analysis of the published clinical studies and an evaluation of the adopted clinical protocols were performed. A total of forty-six articles were eligible to be reviewed. Only sixteen clinical studies reported clinical outcomes on Prama implants, and nine of these were selected having the longest follow-up from different research groups. The clinical follow-up/duration of the studies ranged from 12 months to 6 years. The initially proposed protocols explored neck supracrestal–transmucosal placement and gained interest due to its minimally invasive concept and the ability to proceed without a pre-prosthesis second surgery. The following investigations dedicated attention to the subcrestal or equicrestal implant placement with the conventional flap approach. The clinical studies characterized by the transmucosal exposed neck approach reported high survival rates with a stable bone morphology and reduced bone loss during the follow-up. Further recent implementations included the introduction of different convergent neck heights that need to be evaluated. The use of intraoral scanner technologies and digital workflow resulted in a simpler methodology with control of the marginal crown morphology. The studies support the concept that the hard tissue parameters (such as marginal bone level, MBL) and soft tissue parameters (such as pink esthetic score, PES) were stable or improved during the follow-up. Definitive crowns, designed with low invasiveness for soft tissues, were possible thanks to the morphology of the neck. The clinical studies support the use of the Prama implant with the different neck positions, demonstrating hard tissue preservation and optimal esthetic results in the first years following insertion. However, the current body of evidence is not robust enough to draw definitive conclusions, especially in the long term, and further high-quality research (long-term randomized trials) is required to consolidate these early observations. [ABSTRACT FROM AUTHOR]

Objectives: To evaluate the retreatment efficacy of premixed bioceramic sealer using a reciprocating system, comparing single-cone and carrier-based obturation techniques. Materials and Methods: Twenty-three monoradicular teeth with oval canals were divided into two groups: NeoSealer Flo with single cone (SC) and NeoSealer Flo with Guttafusion (GF). Retreatment was performed using Reciproc Blue (RB) with a crown-down technique. X-ray and CBCT images were taken to measure the remnant areas and volumes. Results: Apical patency was achieved in all the samples. The remnants were mostly distributed in the middle third in the GF group, while an equal distribution in both the middle and apical thirds was observed in the SC group. The GF group had a lower remnant area and volume after RB 50.05, respectively (0.18 ± 0.33 mm2 vs. 0.39 ± 0.80 mm2 and 0.36 ± 0.59 mm3 vs. 0.51 ± 1.16 mm3). The use of RB 50.05 led to an additional reduction in the remnant areas in the SC (14.89%) and GF (69.49%) groups, while in terms of the volume, the reductions were 20.63% and 36.36%. Conclusions: Reciprocating instruments are effective in removing remnants from root canals filled with both single-cone and carrier-based techniques. The blooming effect in CBCT imaging suggests further in vivo studies for validation. [ABSTRACT FROM AUTHOR]

Purpose: The aim of the study was to analyze the microchemistry of human bone in different regions of interest (ROIs) on histologic samples of implants retrieved postmortem by the innovative use of an environmental scanning electronic microscope (ESEM) connected to energy-dispersive x-ray spectroscopy (EDX). Materials and Methods: Maxillary and mandibular bone blocks with inserted implants (n = 12) were obtained postmortem from a patient. The histologic samples were observed uncoated using ESEM in quadrant backscattered condition. Two ROIs (approximately 750 x 500 μm) for each implant were analyzed corresponding to the cortical thread (cortical ROI) and the middle part of each implant (approximately 3.0 mm below; middle ROI). Different electron-dense bone tissue areas were detected through grayscale intensity quantification of ESEM images. Calcium (Ca), phosphorous (P), and titanium (Ti; atomic %) were evaluated by EDX, and Ca/P ratios were calculated and used as the index to identify areas with different mineralization. The presence of Ti contaminants was investigated by EDX microanalysis. Additional ROIs approximately 2.0 mm from the implant interface and not in connection with the implant surface were analyzed as the control. Results: Four bone areas (BAs) with different degrees of mineralization (from 1 as the lowest mineralized to 4 as the highest mineralized) were identified by Ca and P content and by tissue electron density. BA1 (bone marrow areas) and BA2 (areas with active bone remodeling) proved to have low levels of Ca and P, while BA3 (mineralized new bone areas) and BA4 (control cortical bone) had higher content of Ca and P and higher electron density. Mandibular ROIs displayed higher percentages of BA3 and BA4, while maxillary ROIs revealed a greater presence of BA2 and moderate presence of BA1. Control bone showed a high percentage of BA4. Cortical and middle ROIs showed similar BA distribution within mandibular bone, whereas in maxillary bone, a slightly higher presence of BA1 was observed. Ti ions were detected in ROIs of all specimens; the atomic % significantly decreased in the most distant areas. Ti particles were observed close to the implant interface. Analyses 2.0 mm distant from the implant thread revealed low traces of Ti in healthy bone tissue. Conclusion: The high percentage of BA3 and BA4 in mandibular blocks associated with low presence of BA2 suggested the fast formation of compact bone tissue after 7 months from the implant placement. The presence of BA2 in maxilla blocks suggested active bone remodeling still present after 7 months. Ti particles were observed throughout the ROIs with and without bone remodeling activity. ESEM-EDX resulted as a suitable technique to obtain more complete information on microchemistry composition and density/mineralization of bone around implants. For clinical significance, maxillary and mandibular peri-implant bone revealed different mineralization patterns, which means different healing times. The presence of Ti particles at the bone-implant interface and ion translocation, likely due to wear forces in the times following the implant insertion, do not affect the bone remodeling process. [ABSTRACT FROM AUTHOR]

Dental professionals are exposed to significant unavoidable physical stress, and theoretical ergonomic recommendations for a sitting workplace are inapplicable in many dental activities. Work-related musculoskeletal disorders (WMSDs) represent a serious health problem among dental professionals (prevalence: 64–93%), showing involvement of 34–60% for the low back and 15–25% for the hips. Muscle stress; prolonged sitting; forward bending and twisting of the torso and head; unbalanced working postures with asymmetrical weight on the hips and uneven shoulders; and others are inevitable for dental professionals. Therefore, the approach for the prevention and treatment of WMSDs must be therapeutic and compensatory. This project was conceived to provide a Yoga protocol for dental professionals to prevent or treat WMSDs from a preventive medicine perspective, and it would represent a Yoga-based guideline for the self-cure and prevention of musculoskeletal problems. Methods: Specific Yoga positions (āsana, such as Virāsana, Virabhadrāsana, Garudāsana, Utkatāsana, Trikonāsana, Anuvittāsana, Chakrāsana, Uttanāsana, Pashimottanāsana) have been selected, elaborated on and adapted to be practiced in a dental office using a dental stool or the dental office walls or a dental unit chair. The protocol is specifically devised for dental professionals (dentists, dental hygienists and dental assistants) and targeted for the low back, hips and legs (including knees and ankles). The protocol includes Visranta Karaka Sthiti (supported positions) in sitting (Upavistha Sthiti) and standing (Utthistha Sthiti) positions, twisting/torsions (Parivrtta), flexions/forward bend positions (Pashima) and extensions/arching (Purva) for musculo-articular system decompression and mobilization. Results: Over 60 Yogāsana—specifically ideated for back detensioning and mobilization, lumbar lordosis restoration, trunk side elongation, hip release and leg stretches and decontraction—are shown and described. The paper provides a meticulous description for each position, including the detailed movement, recommendations and mistakes to avoid, and the breathing pattern (breath control) in all the breath-driven movements (āsana in vinyāsa). An exhaustive analysis of posture-related disorders affecting the lower body among dental professionals is reported, including low-back pain, hip pain and disorders, piriformis syndrome and quadratus femoris dysfunction (gluteal pain), iliopsoas syndrome, multifidus disorders, femoroacetabular and ischiofemoral impingement, spinopelvic mobility, lumbopelvic rhythm, impairment syndromes, lower crossed syndrome, leg pain, knee pain and ankle disorders. Conclusions: A detailed guideline of āsana for low-back decompression, hip joint destress, piriformis and gluteal muscle release, lumbar lordosis recovery and a spinopelvic mobility increase has been elaborated on. The designed Yogāsana protocol represents a powerful tool for dental professionals to provide relief to retracted stiff muscles and unbalanced musculoskeletal structures in the lower body. [ABSTRACT FROM AUTHOR]