Search

Abstract Background The analysis of cellulose molecular weight distributions by gel permeation chromatography (GPC) is a powerful tool to obtain detailed information on enzymatic cellulose hydrolysis, supporting the development of economically viable biorefinery processes. Unfortunately, due to work and time consuming sample preparation, the measurement of cellulose molecular weight distributions has a limited applicability until now. Results In this work we present a new method to analyze cellulose molecular weight distributions that does not require any prior cellulose swelling, activation, or derivatization. The cellulose samples were directly dissolved in dimethylformamide (DMF) containing 10-20% (v/v) 1-ethyl-3-methylimidazolium acetate (EMIM Ac) for 60 minutes, thereby reducing the sample preparation time from several days to a few hours. The samples were filtrated 0.2 μm to avoid column blocking, separated at 0.5 mL/min using hydrophilic separation media and were detected using differential refractive index/multi angle laser light scattering (dRI/MALLS). The applicability of this method was evaluated for the three cellulose types Avicel, α-cellulose and Sigmacell. Afterwards, this method was used to measure the changes in molecular weight distributions during the enzymatic hydrolysis of the different untreated and ionic liquid pretreated cellulose substrates. The molecular weight distributions showed a stronger shift to smaller molecular weights during enzymatic hydrolysis using a commercial cellulase preparation for cellulose with lower crystallinity. This was even more pronounced for ionic liquid-pretreated cellulose. Conclusions In conclusion, this strongly simplified GPC method for cellulose molecular weight distribution allowed for the first time to demonstrate the influence of cellulose properties and pretreatment on the mode of enzymatic hydrolysis.

Abstract Background In order to generate biofuels, insoluble cellulosic substrates are pretreated and subsequently hydrolyzed with cellulases. One way to pretreat cellulose in a safe and environmentally friendly manner is to apply, under mild conditions, non-hydrolyzing proteins such as swollenin - naturally produced in low yields by the fungus Trichoderma reesei. To yield sufficient swollenin for industrial applications, the first aim of this study is to present a new way of producing recombinant swollenin. The main objective is to show how swollenin quantitatively affects relevant physical properties of cellulosic substrates and how it affects subsequent hydrolysis. Results After expression in the yeast Kluyveromyces lactis, the resulting swollenin was purified. The adsorption parameters of the recombinant swollenin onto cellulose were quantified for the first time and were comparable to those of individual cellulases from T. reesei. Four different insoluble cellulosic substrates were then pretreated with swollenin. At first, it could be qualitatively shown by macroscopic evaluation and microscopy that swollenin caused deagglomeration of bigger cellulose agglomerates as well as dispersion of cellulose microfibrils (amorphogenesis). Afterwards, the effects of swollenin on cellulose particle size, maximum cellulase adsorption and cellulose crystallinity were quantified. The pretreatment with swollenin resulted in a significant decrease in particle size of the cellulosic substrates as well as in their crystallinity, thereby substantially increasing maximum cellulase adsorption onto these substrates. Subsequently, the pretreated cellulosic substrates were hydrolyzed with cellulases. Here, pretreatment of cellulosic substrates with swollenin, even in non-saturating concentrations, significantly accelerated the hydrolysis. By correlating particle size and crystallinity of the cellulosic substrates with initial hydrolysis rates, it could be shown that the swollenin-induced reduction in particle size and crystallinity resulted in high cellulose hydrolysis rates. Conclusions Recombinant swollenin can be easily produced with the robust yeast K. lactis. Moreover, swollenin induces deagglomeration of cellulose agglomerates as well as amorphogenesis (decrystallization). For the first time, this study quantifies and elucidates in detail how swollenin affects different cellulosic substrates and their hydrolysis.

Abstract Background It is important to generate biofuels and society must be weaned from its dependency on fossil fuels. In order to produce biofuels, lignocellulose is pretreated and the resulting cellulose is hydrolyzed by cellulases such as cellobiohydrolases (CBH) and endoglucanases (EG). Until now, the biofuel industry has usually applied impractical celluloses to screen for cellulases capable of degrading naturally occurring, insoluble cellulose. This study investigates how these cellulases adsorb and hydrolyze insoluble α-cellulose − considered to be a more practical substrate which mimics the alkaline-pretreated biomass used in biorefineries. Moreover, this study investigates how hydrodynamics affects cellulase adsorption and activity onto α-cellulose. Results First, the cellulases CBH I, CBH II, EG I and EG II were purified from Trichoderma reesei and CBH I and EG I were utilized in order to study and model the adsorption isotherms (Langmuir) and kinetics (pseudo-first-order). Second, the adsorption kinetics and cellulase activities were studied under different hydrodynamic conditions, including liquid mixing and particle suspension. Third, in order to compare α-cellulose with three typically used celluloses, the exact cellulase activities towards all four substrates were measured. It was found that, using α-cellulose, the adsorption models fitted to the experimental data and yielded parameters comparable to those for filter paper. Moreover, it was determined that higher shaking frequencies clearly improved the adsorption of cellulases onto α-cellulose and thus bolstered their activity. Complete suspension of α-cellulose particles was the optimal operating condition in order to ensure efficient cellulase adsorption and activity. Finally, all four purified cellulases displayed comparable activities only on insoluble α-cellulose. Conclusions α-Cellulose is an excellent substrate to screen for CBHs and EGs. This current investigation shows in detail, for the first time, the adsorption of purified cellulases onto α-cellulose, the effect of hydrodynamics on cellulase adsorption and the correlation between the adsorption and the activity of cellulases at different hydrodynamic conditions. Complete suspension of the substrate has to be ensured in order to optimize the cellulase attack. In the future, screenings should be conducted with α-cellulose so that proper cellulases are selected to best hydrolyze the real alkaline-pretreated biomass used in biorefineries.

The aim of the present study was to generate a consistent data set for biorefinery intermediates from novel energy crop Silphium perfoliatum compared with Fagus sylvatica, including process streams from liquid hot water pretreatment, enzymatic hydrolysis, and fermentation with Bacillus licheniformis. The consistency of the data set was further supported by the application of a consistent analytical method based on high performance anion exchange chromatography with pulsed amperometric detection and validated for process intermediates, which renders the technique a versatile analytical tool also for alcoholic compounds. For the first time, Silphium perfoliatum was used for liquid hot water pretreatment which resulted in a maximal absolute glucose recovery after enzymatic hydrolysis for feedstock pretreated with 200 °C, 20 min, 20% solid loading. Under these conditions, 68% glucose were recovered for Silphium perfoliatum and 62% for Fagus sylvatica. Further, enzymatic hydrolyzates of both feedstocks were successfully used as single carbon sources for 2,3-butanediol fermentation with Bacillus licheniformis resulting in a 2,3-butanediol yield of 39% and 31% of the theoretical yield for Silphium perfoliatum and Fagus sylvatica, respectively. Thus, the technical suitability of Silphium perfoliatum as feedstock for a liquid hot water–based biorefinery process was comprehensively demonstrated and successfully bore the comparison with Fagus sylvatica. [ABSTRACT FROM AUTHOR]

Unspecific peroxygenases have attracted interest due to their ability to catalyze the oxygenation of various types of C–H bonds using only hydrogen peroxide as a cosubstrate. Due to the instability of these enzymes at even low hydrogen peroxide concentrations, careful fed‐batch addition of the cosubstrate or ideally in situ production is required. While various approaches for hydrogen peroxide addition have been qualitatively assessed, only limited kinetic data concerning enzyme inactivation and peroxide accumulation has been reported so far. To obtain quantitative insights into the kinetics of such a process, a detailed data set for a peroxygenase‐catalyzed benzylic hydroxylation coupled with electrochemical hydrogen peroxide production is presented. Based on this data set, we set out to model such an electroenzymatic process. For this, initial velocity data for the benzylic hydroxylation is collected and an extended Ping‐Pong‐Bi‐Bi type rate equation is established, which sufficiently describes the enzyme kinetic. Moreover, we propose an empirical inactivation term based on the collected data set. Finally, we show that the full model does not only describe the process with sufficient accuracy, but can also be used predictively to control hydrogen peroxide feeding rates To limit the concentration of this critical cosubstrate in the system. [ABSTRACT FROM AUTHOR]

Lignocellulosic biomass is a ubiquitous and renewable feedstock for the production of platform chemicals and biofuels. Typically, this recalcitrant biomass is pretreated by physico-chemical techniques causing disintegration and delignification. An additional treatment with laccase-mediator-systems (LMS) has been found to further improve the subsequent enzymatic cellulose hydrolysis. The aim of this study was to investigate the impact of different LMS on the glucose yield of a subsequent hydrolysis of treated beech wood and to elucidate the underlying effect of LMS treatment. The mediators 2,2′-azino-bis-3-ethylbenzothiazoline-6-sulphonic acid (ABTS), 1-hydroxybenzotriazol (HBT) and syringaldehyde were evaluated, but an enhancing effect of LMS treatment on beech wood hydrolysis was only found for HBT. In mass spectrometry analysis of the acid hydrolysate of LMS-treated samples, the mediator HBT could be found in the lignin samples, suggesting a grafting reaction. The fluorescent protein mCherry was used as a reporter for unspecific protein adsorption to biomass samples. LMS treatment with HBT reduced the unspecific adsorption of mCherry to raw beech wood by about 50%, suggesting that the HBT grafting to beech wood lignin decreased the unproductive cellulase binding. In summary, the reduction of unspecific protein adsorption by biomass surface modification with laccase-HBT treatment is proposed to be the underlying mechanism for increased cellulose conversion. [ABSTRACT FROM AUTHOR]

Background: Extraction is the method of choice for separating sensitive products. For example, it has been applied in aromatics and rare‐earth metal separation. Recently, biotechnological processes entered the field of bulk chemicals and might benefit from process intensification by in situ extraction of inhibiting products, however in the presence of cells and/or aeration. This study applies reactive extraction of the polyamide monomer hexane‐1,6‐diamine from cell‐containing medium. Results: To prove technical feasibility of this reactive extraction, simulation of the extraction column based on single‐drop measurements was validated at pilot‐scale. Simulated results show good accordance with experimental data with an error below 20%. The extraction column was subsequently used as a bioreactor with integrated aeration and product extraction applying a four‐phase system investigating the effect on drop distributions and holdup of the dispersed phases. Interestingly, aeration increased the holdup up to five‐fold and decreased the mean drop size of the organic extractive phase by 30%, thereby potentially improving extraction efficiency. Conclusion: The ReDrop simulation tool is capable of predicting challenging separation processes like the reactive extraction of hexane‐1,6‐diamine with D2EHPA diluted in oleyl alcohol from a biotransformation medium. The process design enabled four‐phase operation of the column with aeration, extractive organic phase and cell‐containing continuous aqueous phase. © 2018 Society of Chemical Industry [ABSTRACT FROM AUTHOR]