Search

Herein, we present a comprehensive total synthesis of cannabidiol integrating both batch and continuous flow conditions. Our approach is planned to streamline the synthesis of olivetolic acid derivatives and utilize an enantiomerically pure monoterpene moiety obtained from naturally occurring (R)‐(+)‐limonene by photocatalysis. Key reactions, including the synthesis of olivetolic ester and a Friedel‐Crafts alkylation, are successfully adapted to continuous flow, resulting in improved yields and selectivities. This study not only offers a scalable and efficient route for cannabidiol synthesis but also contributes to the synthetic approaches to access cannabinoids (diversity synthesis), with potential applications in medicinal and industrial contexts. [ABSTRACT FROM AUTHOR]

Pralidoxime salts are important medical countermeasures towards different organophosphorus compounds, either nerve agents or pesticides, as they act as acetylcholinesterase reactivators, avoiding health issues and even death that can result from intoxication with such chemicals. In this work, we present an expeditious study focuses on the optimization of a two‐step continuous‐flow synthesis of 2‐PAM. Initial attempts to replace the solvent composition in the oxime formation reaction with acetonitrile resulted in lower yields, highlighting the significance of a polar protic solvent. Subsequent optimization under continuous‐flow conditions revealed the successful execution of oxime formation at room temperature with a residence time of 20 minutes, achieving an impressive 96 % conversion, surpassing literature‐reported conditions. The methylation step required a high residence time of 60 minutes at 120 °C for a substantial conversion of 78 %. The two‐step continuous‐flow process demonstrated robustness, yielding 75 %, with space‐time yields of 0.32 g/h and 0.18 g/h. Further concentration adjustments increased space‐time yields to 3.2 g/h and 2.2 g/h. Despite solvent incompatibility, a strategic alteration of the reaction sequence allowed for a successful cascade process, integrating the methylation step in acetonitrile and the oxime formation in water. The continuous‐flow system, incorporating a heat exchanger, exhibited stability, maintaining full conversion and a space‐time yield of 0.3 g/h over extended periods. This systematic optimization not only enhances the efficiency of 2‐PAM synthesis but also provides insights into a scalable and practical continuous‐flow cascade process. [ABSTRACT FROM AUTHOR]

This study investigated the oxidation of 5-hydroxymethylfurfural (HMF) to produce valuable products such as 2,5-furandicarboxaldehyde (DFF), 5-formyl-2-furancarboxylic acid (FFCA) and 2,5-furandicarboxylic acid (FDCA) through (photo) chemical and enzymatic catalysis. Laccases from different sources, including Aspergillus spp., Pseudomonas cepacea, and Trametes versicolor, were evaluated for their catalytic activity in the HMF oxidation. Laccase from Trametes versicolor (LacTV) emerged as the most effective catalyst, achieving complete conversion of HMF under specific pH conditions. The reaction mechanisms were explored, revealing a preference for the primary alcohol oxidation pathway over the aldehyde, leading to the formation of DFF and subsequent conversion to FFCA and FDCA. The impact of substrate concentration on HMF conversion was examined, revealing optimal conversion at lower HMF concentrations (<100 mM) and reduced performance at higher concentrations (>100 mM). The study also examined the influence of blue light (430 nm) on this reaction, revealing the dependence on light exposure for gC3N4 based catalysts and a negative effect for LacTV. Furthermore, the study introduces a modular flow chemical platform that utilizes Continuous Stirred Tank Reactors (CSTR) in a cascade configuration, the optimization of HMF oxidation. The implementation of this innovative approach has led to the effective synthesis of FDCA, demonstrating an impressive 40-fold increase in productivity compared to the traditional batch system. These results present significant potential for advancing green chemistry and sustainable chemical synthesis, introducing novel possibilities for environmentally friendly HMF oxidation processes. [ABSTRACT FROM AUTHOR]

The objective of this study was to assess the influence of the extension of collar and fatigue cycling on the fracture load of anterior zirconia crowns. A total of 60 anterior full-crown preparations (central incisor) were machined in glass fiber– filled epoxy resin. Zirconia copings were designed and milled using computeraided design/computer-assisted manufacture (thickness: buccal = 0.62 mm, lingual = 0.65 mm, incisal = 0.72 mm). The cervical collars (occlusogingival height = 0.8 mm, buccolingual width = 1.0 mm) were totally or partially (buccal face) removed for modified copings. They were randomly allocated to six groups according to the type of cervical collar design and the presence (or not) of fatigue cycling (n = 10). The veneering ceramic layer was pressed, and the crowns were cemented with resin cement. The samples were tested until fracture in a universal testing machine and analyzed by stereomicroscopy. Data were statistically analyzed by two-way analysis of variance and Tukey test (5%). Removal of the cervical collar significantly affected the fracture strength of zirconia crowns (P = .000), whereas fatigue cycling did not (P = .428). The mean failure load was lower in the groups with no collar. The most frequent failure modes were cracking of the veneer porcelain in collarless crowns and catastrophic failure in the others. The authors concluded that removal of the vestibular collar of zirconia copings in anterior crowns does not reduce the fracture load of the crowns. However, removal of the entire collar reduces the fracture load and cannot be recommended. [ABSTRACT FROM AUTHOR]

The required connector dimension for zirconia fixed dental prostheses (FDPs) may be a clinical limitation due to limited space in the occlusogingival direction. Using no veneering in the gingival regions of the pontics and connectors may solve this problem. This study evaluated the mechanical durability of zirconia FDPs with and without veneering in the gingival area of the connectors and pontics and subsequent airabrasion of this region with different protocols. Models were made of resin abutments (diameter = 6 or 8 mm, height = 6 mm, 6 degrees convergence) and embedded in polyurethane resin (distance = 11 mm). Zirconia frameworks were milled and randomly distributed by veneering (veneering of the entire framework [VEN] or no veneering at gingival regions of the pontic and connector [NVEN]) and by air-abrasion (Al2O3/SiO2, 30 μm; or 45 μm Al2O3. FDPs were adhesively cemented and subjected to mechanical cycling (1,200,000 cycles, 200 N, 4 Hz, with water cooling). Specimens were tested until fracture (1 mm/min), and failure modes were classified. Data (N) were subjected to one-way analysis of variance in two sets, Tukey test (α = .05) and Weibull analysis. While veneering did not significantly affect the results (VEN: 1,958 ± 299 N; NVEN: 1,788 ± 152 N; P = .094), air abrasion did (P = .006), with the worst results for the groups conditioned with 45 μm Al2O3 (SiO2: 1,748 ± 273 N; Al2O3: 1,512 ± 174 N). The NVEN group demonstrated the highest Weibull modulus (12.8) compared with the other groups (5.3–7.2). Fractures commonly initiated from the gingival side of the connector. Veneering of the gingival region of the connectors and pontics in zirconia FDPs did not diminish the fracture strength, but air-abrasion of this area with 45 μm Al2O3 decreased the results. [ABSTRACT FROM AUTHOR]