Search

In this study, polymer composites using low-density polyethylene (LDPE) and layered hydroxide salts (LHS) were synthesized. The following compositions of LHS were obtained Zn5(OH)8(An-)2/n.yH2O, where A was varied in order to obtain hydrophilic (A = NO3-) or hydrophobic (A = DDS- - dodecyl sulfate or DBS- - dodecyl benzene sulfonate). Synthesis was carried out by co-precipitation in alkaline medium and drying, being followed by characterization via Fourier-transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction and scanning electron microscopy. A variable amount of filler was then incorporated into the LDPE via extrusion, which was then injection molded to obtain specimens for evaluating tensile properties (Young's modulus, tensile strength, strain at break and toughness). For comparison, the sodium salts of the surfactants (NaDDS and NaDBS) were also used as fillers in LDPE. The X-ray diffraction results indicated that the hydrophobic LHS were exfoliated in the polymer matrix, whereas the hydrophilic LHS was only delaminated. In the LDPE composites, melting and crystallization temperatures were nearly constant, along with the crystallinity indexes. The mechanical properties were mainly varied when the organophilic LHS was used. Overall, fillers based on LHS, especially those containing hydrophobic anions, may be interesting alternatives in the production of reinforced thermoplastics.

O presente trabalho descreve a síntese e caracterização de hidróxidos duplos lamelares (HDL) de Zn/Al na razão molar 2:1, os quais foram intercalados com íons cloreto hidratados e ânions derivados dos corantes azo alaranjado de metila (AM) e alaranjado II (AII). Após caracterização, os materiais foram utilizados como cargas em polietileno de alta densidade (PEAD) e nanocompósitos foram preparados por extrusão e injeção, seguindo a norma ASTM D638-10. Os teores de cargas variaram de 0,1 até 2% (incluindo-se os sais de sódio dos corantes) e os nanocompósitos homogêneos foram avaliados em relação as suas propriedades estruturais, térmicas e mecânicas. De modo geral, após a adição das cargas existe somente uma pequena influência na temperatura de fusão e cristalização do PEAD. Para os HDLs contendo o pigmento intercalado com o ânion do corante AM e sais de sódio de ambos os corantes, as propriedades mecânicas apresentaram leve aumento do módulo e tensão de ruptura e diminuição do alongamento em relação ao polímero puro e um comportamento inverso foi observado para o ânion AII, além do HDL contendo ânions cloreto hidratados.

This study synthesized mixed matrix membranes (MMMs) using PEBAX® MH-1657 and ZIF-67 with varying particle concentrations (1, 3, and 5 wt%) to assess permeability and selectivity. ZIF-67 nanoparticles were prepared using the solvothermal method with methanol and characterized. Permeation tests were conducted at 10 and 15 bar using N2 and CO2. The analysis revealed ZIF-67 particles with an approximate diameter of 280 nm and confirmed characteristic sodalite peaks. The ideal CO2/N2 selectivity reached 67 (CO2 permeability = 132 ± 3.5 Barrer) at 15 bar. The impact of ZIF-67 varied with pressure and composition; at 10 bar, CO2/N2 selectivity decreased compared to pure PEBAX®; however, at 15 bar, the 1 wt% ZIF-67 membrane exhibited superior selectivity, surpassing Robeson's upper bound. The results indicate that ZIF-67 enhances the permeability and selectivity of PEBAX®, with superior performance observed at lower concentrations.

Polystyrene (PS) is one of the most widely used polymers in the world, having a wide applicability. PS can be used in pure or modified forms, and the commercial materials most used for modifications are non-renewable and have high costs. For this reason, studies have been carried in order to evaluate renewable components application such as vegetable oils, for this purpose. In this context, different materials have been prepared from styrene (STY) and the common fatty oleic acid (FA) modified with allyl alcohol through esterification in acid catalysis. The allyl oleate (AOL) was obtained with yield of 89% (w/w) and it was submitted to a reaction with styrene at variable concentrations. The copolymers (PS-AOL) were obtained and characterized by conventional techniques. The results indicated that the copolymerization occurred. Therefore, the proposed methodology allows the compatibilization between a renewable matrix and PS for the new materials obtaining.

In this work Fenton and photo-Fenton processes for textile dye degradation were investigated using iron (II) immobilized in alginate spheres. Photomicrographs obtained by scanning electron microscopy showed an irregular and porous surface with a homogeneous distribution of iron. The Fenton process was used to evaluate the degradation efficiency of reactive dyes and this procedure showed a low degradation effect. The association of artificial visible light or solar radiation in the Fenton process (foto-Fenton process) showed degradation ratios of 70 and 80% respectively in 45 min. It was also observed that the iron-alginate matrix can be reused.

Microparticles of poly(ε-caprolactone) (PCL) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) containing manidipine dihydrochloride (MAN) were successfully prepared by the simple emulsion/solvent evaporation method. All formulations showed loading efficiency rates greater than 80% and average particle size less than 8 μm. Formulations had spherical shape with smooth and porous surface for PCL and PHBV, respectively. According to Fourier-transform infrared spectroscopy, initial components were not chemically modified during microencapsulation. X-ray diffraction patterns and differential scanning calorimetry demonstrated that this process led to drug amorphization. In vitro dissolution studies showed that all microparticles prolonged MAN release, mainly which one obtained using PCL that contained 5% of drug loaded (PCL-M5). Animal studies demonstrated that formulation PCL-M5 was able to keep the variation of mean arterial pressure after phenylephrine administration up to 24 hours. These data confirmed the sustained antihypertensive effect of the investigated microparticles. Results provided an experimental basis for using formulation PCL-M5 as a feasible carrier for oral controlled release of MAN intended for treating high blood pressure.

Microparticles of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(ε-caprolactone) (PCL) containing resveratrol were successfully prepared by simple emulsion/solvent evaporation. All formulations showed suitable encapsulation efficiency values higher than 80%. PHBV microparticles revealed spherical shape with rough surface and presence of pores. PCL microparticles were spherically shaped with smooth surface. Fourier-transformed infrared spectra demonstrated no chemical bond between resveratrol and polymers. X-ray powder diffraction patterns and differential scanning calorimetry analyses indicated that microencapsulation led to drug amorphization. These PHBV/PCL microparticles delayed the dissolution profile of resveratrol. Release profiles were better fitted to biexponential equation. The hypochlorous-acid-scavenging activity and 2,2-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) radical cation discoloration assay confirmed that the antioxidant activity of PHBV/PCL microparticles was kept, but was dependent on the microparticle morphology and dissolution profile. Resveratrol-loaded PHBV/PCL microparticles showed no cytotoxic effect on red blood cells.