Search

The aim of presented research concerned synthesis of a novel lignosulfonate-based sorbent and its application in batch adsorption tests related to removal of an active pharmaceutical ingredient (ibuprofen). Obtained hybrid material was thoroughly characterized with respect to morphology, porosity (BET method and BJH algorithm), electrokinetic stability, and characteristic functional groups. As a result of the proposed synthesis route, an active MgO–SiO2/lignosulfonate hybrid was obtained as confirmed by significant amount of functional groups present in its structure and relative good parameters of the porous structure (ABET = 71 m2/g, Vp = 0.2 mL/g and Sp = 11.8 nm). Next stage concerned typical batch adsorption tests with respect to active pharmaceutical ingredient (API)—ibuprofen. It was proved that efficiency of removal of ibuprofen was mostly determined by its structure as well as variable process parameters. Affinity of sorption material towards model organic impurity was established based on equilibrium and kinetics study of adsorption process performed. A key element of the investigations was an interaction and mechanism study resulted from interpretation how the parameters of the adsorption affect the nature of the adsorbent/adsorbate interactions. Experimental data collected, supplemented with regeneration tests, proved significant affinity of ibuprofen to the hybrid sorbent and enabled determination of nature of the adsorbent/adsorbate interactions. Moreover, suggested mechanism of ibuprofen sorption was proposed.

Praca zostala zrealizowana w ramach projektow badawczych Politechniki Poznanskiej 03/32/DSPB/0806 i 03/32/DSMK/0810.

Diverse fields of modern technology and biomedicine can benefit from the application of ready-to-use chitin-based scaffolds. In this work we show for the first time the applicability of tubular and porous chitin from Caribena versicolor spiders as a scaffold for the development of an effective CuO/Cu(OH)2 catalyst for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AM), and as a scaffold for the tissue engineering of selected cells. The formation of CuO/Cu(OH)2 phases on and within the chitinous tubes leads to a hybrid material with excellent catalytic performance with respect to the reduction of p-nitrophenol. On the other hand, experimental results provide for the first time strong evidence for the biocompatibility of spider chitin with different cell types, a human progenitor cell line (hPheo1), as well as cardiomyocytes differentiated from induced pluripotent stem cells (iPSC-CMs) that were cultured on a tube-like scaffold.

Among marine demosponges (Porifera: Demospongiae), only representatives of the order Verongiida have been recognized to synthetize both biologically active substances as well as scaffolds-like fibrous skeletons made of structural aminopolysaccharide chitin. The unique 3D architecture of such scaffolds open perspectives for their applications in waste treatment, biomimetics and tissue engineering. Here, we focus special attention to the demosponge Pseudoceratina purpurea collected in the coastal waters of Singapore. For the first time the detailed description of the isolation of chitin from the skeleton of this sponge and its identification using diverse bioanalytical tools were carried out. Calcofluor white staining, FTIR analysis, electrospray ionization mass spectrometry (ESI-MS), SEM, and fluorescence microscopy as well as a chitinase digestion assay were applied in order to confirm with strong evidence the finding of alpha-chitin in the skeleton of P. purpurea. We suggest that the discovery of chitin within representatives of Pseudoceratinidae family is a perspective step in evaluation of these verongiid sponges as novel renewable sources for both chitin and biologically active metabolites, which are of prospective use for marine oriented biomedicine and pharmacology, respectively.

This study investigated for the first time the degradation of phenol, chlorophenol, fluorophenol and bisphenol A (BPA) by the novel iron phthalocyanine/spongin hybrid material under various process conditions: hydrogen peroxide and UV irradiation. The heterogeneous catalyst, iron phthalocyanine/spongin (SFe), was produced by an adsorption process. The product obtained was investigated by a variety of spectroscopic techniques - X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR) and carbon-13 nuclear magnetic resonance (13C NMR) - as well as elemental and thermal analysis. The study confirmed the stable immobilization of the dye on the biopolymer. The results demonstrate that the degradation of phenols and BPA followed pseudo-second-order kinetics under different experimental conditions. The synergy of SFe, H2O2 and UV was found to produce a significant increase in the removal efficiency and resulted in complete removal of contaminants in a short time of 1 h. The reaction products were identified by high-performance liquid chromatography/mass spectrometry (HPLC-MS) and possible degradation pathways were proposed, featuring a series of steps including cleavage of CC bonds and oxidation.

Composites containing biological materials with nanostructured architecture have become of great interest in modern materials science, yielding both interesting chemical properties and inspiration for biomimetic research. Herein, we describe the preparation of a novel 3D nanostructured MnO2-based composite developed using a carbonized proteinaceous spongin template by an extreme biomimetics approach. The thermal stability of the spongin-based scaffold facilitated the formation of both carbonized material (at 650 °C with exclusion of oxygen) and manganese oxide with a defined nanoscale structure under 150 °C. Remarkably, the unique network of spongin fibers was maintained after pyrolysis and hydrothermal processing, yielding a novel porous support. The MnO2-spongin composite shows a bimodal pore distribution, with macropores originating from the spongin network and mesopores from the nanostructured oxidic coating. Interestingly, the composites also showed improved electrochemical properties compared to those of MnO2. Voltammetry cycling demonstrated the good stability of the material over more than 3,000 charging/discharging cycles. Additionally, electrochemical impedance spectroscopy revealed lower charge transfer resistance in the prepared materials. We demonstrate the potential of extreme biomimetics for developing a new generation of nanostructured materials with 3D centimeter-scale architecture for the storage and conversion of energy generated from renewable natural sources.

We report a strategy for preserving the structural features of collagen triple helix in turbostratic graphite., Fabrication of biomimetic materials and scaffolds is usually a micro- or even nanoscale process; however, most testing and all manufacturing require larger-scale synthesis of nanoscale features. Here, we propose the utilization of naturally prefabricated three-dimensional (3D) spongin scaffolds that preserve molecular detail across centimeter-scale samples. The fine-scale structure of this collagenous resource is stable at temperatures of up to 1200°C and can produce up to 4 × 10–cm–large 3D microfibrous and nanoporous turbostratic graphite. Our findings highlight the fact that this turbostratic graphite is exceptional at preserving the nanostructural features typical for triple-helix collagen. The resulting carbon sponge resembles the shape and unique microarchitecture of the original spongin scaffold. Copper electroplating of the obtained composite leads to a hybrid material with excellent catalytic performance with respect to the reduction of p-nitrophenol in both freshwater and marine environments.

Evolution and multi-functionality of the chitin system in sponges (Porifera) is currently a prime focus in modern experimental zoology including in phylogenetic studies of diverse poriferan taxa. Here, we present the first evidence of chitin in the skeleton of the demosponge originally defined as Dendrilla lacunosa (Porifera: Dendroceratida: Keratosa). The presence of chitin has been clearly confirmed using special Calcofluor white staining, Fourier-transform Infrared (FTIR) and Raman Spectroscopy, electrospray ionization mass spectrometry (ESI-MS), as well as a chitinase digestion assay. This feature is, however, unusual for Keratosa sponges with skeletons usually made of structural protein – spongin, and at the same time is typical for sponges of the Verongiida (subclass Verongimorpha). Consequently, obtained bioanalytical results, together with our findings about distinctive morphological and molecular characters of this Dendrilla-like sponge confirmed the necessity of renaming this organism as a novel species Ernstilla lacunosa in the new family Ernstillidae. This study is the first example of the impact of the reporting of chitin on the systematics of sponges.

A glassy carbon electrode (GCE) was modified with a nanocomposite prepared from polymerized β-cyclodextrin (β-CD) and reduced graphene oxide (rGO). The modified GCE is shown to enable the voltammetric determination of traces of levofloxacin (LEV) by various electrochemical techniques. Experimental factors affecting the results including the amount of the substrates in preparation of the nanocomposite, accumulation time, the scan rate and pH value of the electrolyte were optimized. The modified GCE, best operated at a working potential of 1.00 V (vs. Ag/AgCl), has two linear response ranges, one for low LEV concentrations (100 pmol L−1 to 100 nmol L−1), and one for higher LEV concentrations (100 nmol L−1 to 100 μmol L−1). The limit of detection and sensitivity are calculated to be 30 pmol L−1 and 467.33 nA μmol L−1 cm−2, respectively. The modified GCE demonstrates a number of advantages such as high sensitivity and selectivity, low LOD, excellent reproducibility, high surface-to-volume ratio, and good electrocatalytic activity towards LEV. The sensor was successfully applied to the determination of LEV in spiked human serum samples.

The biosynthesis, structural diversity, and functionality of collagens of sponge origin are still paradigms and causes of scientific controversy. This review has the ambitious goal of providing thorough and comprehensive coverage of poriferan collagens as a multifaceted topic with intriguing hypotheses and numerous challenging open questions. The structural diversity, chemistry, and biochemistry of collagens in sponges are analyzed and discussed here. Special attention is paid to spongins, collagen IV-related proteins, fibrillar collagens from demosponges, and collagens from glass sponge skeletal structures. The review also focuses on prospects and trends in applications of sponge collagens for technology, materials science and biomedicine.

Sponges (Porifera) are recognized as aquatic multicellular organisms which developed an effective biochemical pathway over millions of years of evolution to produce both biologically active secondary metabolites and biopolymer-based skeletal structures. Among marine demosponges, only representatives of the Verongiida order are known to synthetize biologically active substances as well as skeletons made of structural polysaccharide chitin. The unique three-dimensional (3D) architecture of such chitinous skeletons opens the widow for their recent applications as adsorbents, as well as scaffolds for tissue engineering and biomimetics. This study has the ambitious goal of monitoring other orders beyond Verongiida demosponges and finding alternative sources of naturally prestructured chitinous scaffolds; especially in those demosponge species which can be cultivated at large scales using marine farming conditions. Special attention has been paid to the demosponge Mycale euplectellioides (Heteroscleromorpha: Poecilosclerida: Mycalidae) collected in the Red Sea. For the first time, we present here a detailed study of the isolation of chitin from the skeleton of this sponge, as well as its identification using diverse bioanalytical tools. Calcofluor white staining, Fourier-transform Infrared Spcetcroscopy (FTIR), electrospray ionization mass spectrometry (ESI-MS), scanning electron microscopy (SEM), and fluorescence microscopy, as well as a chitinase digestion assay were applied in order to confirm with strong evidence the finding of a-chitin in the skeleton of M. euplectellioides. We suggest that the discovery of chitin within representatives of the Mycale genus is a promising step in their evaluation of these globally distributed sponges as new renewable sources for both biologically active metabolites and chitin, which are of prospective use for pharmacology and biomaterials oriented biomedicine, respectively.

Marine demosponges (Porifera: Demospongiae) are recognized as first metazoans which have developed over millions of years of evolution effective survival strategies based on unique metabolic pathways to produce both biologically active secondary metabolites and biopolymer-based stiff skeletons with 3D architecture. Up to date, among marine demosponges, only representatives of the Verongiida order have been known to synthetize biologically active substances as well as skeletons made of structural polysaccharide chitin. This work, to our knowledge, demonstrates for the first time that chitin is an important structural component within skeletons of non-verongiid demosponges Acarnus wolffgangi and Echinoclathria gibbosa collected in the Red Sea. Calcofluor white staining, FTIR and Raman analysis, ESI-MS, SEM, and fluorescence microscopy as well as a chitinase digestion assay were applied in order to confirm, with strong evidence, the finding of α-chitin in the skeleton of both species. We suggest that, the finding of chitin within these representatives of Poecilosclerida order is a promising step in the evaluation of these sponges as novel renewable sources for both biologically active metabolites and chitin, which are of prospective application for pharmacology and biomedicine.

Chitin, as a fundamental polysaccharide in invertebrate skeletons, continues to be actively investigated, especially with respect to new sources and the development of effective methods for its extraction. Recent attention has been focused on marine crustaceans and sponges, however, the potential of spiders (order Araneae) as an alternative source of tubular chitin has been overlooked. In this work, we focused our attention on chitin from up to 12 cm-large Theraphosidae spiders, popularly known as tarantulas or bird-eating spiders. These organisms &ldquo, lose&rdquo, large quantities of cuticles during their molting cycle. Here, we present for the first time a highly effective method for the isolation of chitin from Caribena versicolor spider molt cuticle, as well as its identification and characterization using modern analytical methods. We suggest that the tube-like molt cuticle of this spider can serve as a naturally prefabricated and renewable source of tubular chitin with high potential for application in technology and biomedicine.

The bioactive bromotyrosine-derived alkaloids and unique morphologically-defined fibrous skeleton of chitin origin have been found recently in marine demosponges of the order Verongiida. The sophisticated three-dimensional (3D) structure of skeletal chitinous scaffolds supported their use in biomedicine, tissue engineering as well as in diverse modern technologies. The goal of this study was the screening of new species of the order Verongiida to find another renewable source of naturally prefabricated 3D chitinous scaffolds. Special attention was paid to demosponge species, which could be farmed on large scale using marine aquaculture methods. In this study, the demosponge Pseudoceratina arabica collected in the coastal waters of the Egyptian Red Sea was examined as a potential source of chitin for the first time. Various bioanalytical tools including scanning electron microscopy (SEM), fluorescence microscopy, FTIR analysis, Calcofluor white staining, electrospray ionization mass spectrometry (ESI-MS), as well as a chitinase digestion assay were successfully used to confirm the discovery of &alpha, chitin within the skeleton of P. arabica. The current finding should make an important contribution to the field of application of this verongiid sponge as a novel renewable source of biologically-active metabolites and chitin, which are important for development of the blue biotechnology especially in marine oriented biomedicine.

This study reports on the application of biomass derived from the nuisance fresh-water diatom species Didymosphenia geminata towards the adsorption and removal of heavy metal ions from water. The cell-free polysaccharide-based stalks of these diatoms were used as adsorbents to remove harmful metal ions: Pb(II), Ni(II) and Cd(II). Detailed analyses of the adsorption kinetics using both pseudo-first-order model and pseudo-second-order models were performed. The results show a strong correspondence to a pseudo-second-order kinetic model. The Langmuir and Freundlich models were used to describe the adsorption isotherms. The correlation coefficients (r2) of the Langmuir model were equal to 0.994 (Pb2+), 0.995 (Cd2+) and 0.995 (Ni2+), and the correlation coefficients (r2) for the Freundlich model were equal to 0.991 (Pb2+), 0.991 (Cd2+) and 0.987 (Ni2+). The experimental data for all metal ions strongly support the Langmuir isotherm model. It is shown that stalks of D. geminata exhibited exceptional sorption capacity (qm) for Pb(II) ions of 175.48 mg/g. Additionally, a high sorption capacity for Cd(II) (145.86 mg/g), and Ni(II) (130.27 mg/g) was observed. The thermodynamic aspects of the adsorption process of selected metal ions are also discussed. Preliminary tests investigating applications of D. geminata stalks for sewage purification from galvanic industry and battery and accumulator production were performed. These comprehensive studies show that D. geminata can be robustly applied for the removal of harmful metal ions from wastewater.