Search

This study aimed to evaluate the effects of 30% hydrogen peroxide (HP) solution containing various contents of 45S5 bioactive glass (BAG) on whitening efficacy and enamel surface properties after simulating the clinical bleaching procedure.A total of 60 bovine enamel specimens discolored with black tea were divided into five groups treated with distilled water (DW), HP, 0.01 wt.% BAG + HP, 1.0 wt.% BAG + HP, and 20.0 wt.% BAG + HP (n = 12). The pH change was observed for 20 min immediately after mixing the experimental solutions, which were applied for 20 min/week, at 37 °C over 21 days. Color, gloss, roughness, microhardness, and micromorphology measurements were conducted before and after bleaching treatment.All groups containing BAG experienced an increase in pH from 3.5 to 5.5 in less than 1 min, and the final pH increased as the BAG content increased. The ΔE of all experimental groups was significantly higher than that of the DW group (p0.05), but there were no significant differences between different BAG contents (p0.05). Gloss significantly decreased in all experimental groups compared to the DW group, and the increased BAG content had significantly affected the decrease in gloss (p0.05). There was no statistical difference in surface roughness (p0.05), but hardness increased significantly with BAG content after bleaching treatment (p0.05).HP containing 45S5 BAG showed efficacy in tooth whitening. Also, the pH value of the HP remained acidic near 3.5 for 20 min, while the HP containing the 45S5 BAG showed an increase in pH, which inhibited the demineralization of the enamel surface, and maintained the surface morphology.These novel materials are promising candidates to minimize enamel surface damage caused by HP during bleaching procedure in dental clinic.

The aim of this study was to evaluate the antimicrobial, stain and protein removal efficacy of denture or orthodontic appliance cleansers using in vitro test methods. Experimental cleansers were applied for experimental time in each evaluation method. To evaluate the microorganism removal efficacy, C. albicans and S. mutans removal rate was calculated from the specimen surface. Stain and protein removal rate was calculated using the spectrophotometer. Experimental cleansers significantly affected the microorganism removal rate for both C. albicans and S. mutans, as well as the stain and protein removal rates, at each experimental time (p

Poly (methyl methacrylate) (PMMA) is a commonly used denture material with poor antimicrobial effects. This study investigated the antimicrobial effects of PMMA-containing silver-phosphate glass. We fabricated a novel material comprising PMMA-containing silver-phosphate glass. Then, microhardness, flexural strength, and gloss unit were analyzed. Antimicrobial activity against Streptococcus mutans and Candida albicans was investigated. Colony-forming units were counted, and antimicrobial rates were measured. Biocompatibility tests were performed using a colorimetric MTT assay for evaluating cell metabolic activity. The microhardness, flexural strength, and gloss unit of the experimental groups (with silver-phosphate glass) were not significantly different from those of the control group (no silver-phosphate glass) (P > 0.05), which showed clinically valid values. With increasing proportions of silver-phosphate glass, the antimicrobial activity against the two microorganisms increased (P < 0.05). Furthermore, S. mutans showed more than 50% antimicrobial activity in 4%, 6%, and 8% experimental groups, C. albicans showed more than 50% antimicrobial activity in 6% and 8% groups, and a statistically significant difference in antimicrobial activity was observed compared to the control (P < 0.05). The cell viability of the experimental groups was not significantly different from that of the control group (P > 0.05). Both control and experimental groups showed approximately 100% cell viability. These results suggest that silver-phosphate glass is a promising antimicrobial material in dentistry.

Background. The gaps at the margins of restorative composite resin can increase as the carious process occurs underneath the materials, causing further demineralization along the tooth cavity wall. The aim of this study was to evaluate the effects of restorative resin composite containing hydrated calcium silicate (hCS) filler on enamel protection against demineralization by simulating microleakage between the test material and teeth in a cariogenic environment. Methods. The experimental resin composites were composed of 70 wt% filler, which was mixed with a glass filler and hCS in a weight ratio of 70.0% glass (hCS 0), 17.5% hCS + 52.5% glass (hCS 17.5), 35.0% hCS + 35.0% glass (hCS 35.0), and 52.5% hCS + 17.5% glass (hCS 52.5). A light-cured experimental resin composite disk was positioned over a polished bovine enamel disk, separated by a 30-µm gap, and immersed in artificial saliva with pH 4.0 for 15, 30, and 60 days. After the immersion period, the enamel disk was separated from the resin composite disk and evaluated using a microhardness tester, atomic force microscopy, and polarized light microscopy. The opposing sides of the enamel and resin composite disks were observed using scanning electron microscopy/energy dispersive X-ray spectrometry (SEM/EDS). Results. The enamel surface showed a significant increase in microhardness, decrease in roughness, and remineralization layer as the proportion of hCS increased (P < 0.05). In the SEM image, enamel surface with hCS 35.0 and 52.5 after all experimental immersion periods showed a pattern similar to that of a sound tooth. Conclusions. The results demonstrated that increasing the hCS filler level significantly increased the prevention effect of enamel demineralization compared to restorative resin composites containing conventional dental glass filler. Despite some microleakage exposed to a cariogenic environment, these novel composites may be promising dental biomaterials for protecting teeth against demineralization and preventing secondary caries around the restorations.

The objectives of this study were to develop a novel bleaching material containing hydrated calcium silicate (hCS) particles and investigate the effects of hCS on the bleaching efficacy, microhardness, and surface morphology of bovine enamel. To prepare the hCS particles, white Portland cement was mixed with distilled water and ground into a fine powder. The particles in various proportions were then mixed with 35% hydrogen peroxide solution (HP), while HP without hCS was used as a control (HP), and teeth whitening gel was used as a commercial control (CC). Following the thrice application of experimental and control solutions on the discolored bovine enamel surface for 15 min, color change (n = 10), microhardness (n = 10), and micromorphology (n = 2) of the enamel surface were analyzed. The Δ E* of the enamel surface treated with the experimental solution containing hCS was significantly higher than that of the CC, but there were no significant differences between the different hCS contents. The experimental solution containing hCS reduced the percentage of microhardness loss on the enamel surface, and the percentage of microhardness loss significantly decreased as the content of hCS increased (p

Funding Acknowledgements Type of funding sources: None. Introduction The risk of procedure-related complications and rhythm outcomes differ between men and women after atrial fibrillation catheter ablation (AFCA). We evaluated whether consistent sex differences existed in mapping and rhythm outcomes in repeat ablation procedures. Methods Among 3,282 patients in the registry, we analysed 443 consecutive patients (24.6% female, 58.5 ± 10.3 years old, 61.5% paroxysmal AF) who underwent a second AFCA. We compared the clinical factors, mapping, left atrial (LA) pressure, complications, and long-term clinical recurrences after propensity score matching. Results The LA volume index (43.1 ± 18.6 vs. 35.8 ± 11.6 ml/m2, p Conclusions During the repeat AFCA procedures, PV reconnections were lower in women than men, and the existence of extra-PV triggers and an LA pressure elevation was more significant, which resulted in poor rhythm outcomes.

INTRODUCTION Mesh-type flexible tip (MFT) catheters allow clinicians to safely generate large radiofrequency lesions during catheter ablation of atrial fibrillation (AF), while contact force (CF) catheters provide better catheter-tissue contact. We compared the clinical outcomes of catheter ablation of AF using MFT and CF catheters in a prospective, nonrandomized manner. METHODS We prospectively assigned 217 patients with AF (paroxysmal AF 73.5%; male 69.1%; 59.9 ± 10.7 years old) at a 1:1 ratio to ablation with MFT catheters (FlexAbility) or CF catheters (TactiCath). The primary endpoint was AF recurrence after a single procedure; the secondary endpoint was a response to antiarrhythmic drugs. RESULTS After a mean follow-up of 22.3 ± 4.4 months, the clinical recurrence rate did not significantly differ between the two study groups (29.7% vs 30.2%; P = .941) (log-rank P = .838). The recurrence rate for atrial tachycardias (30.3% vs 9.7%; P = .035) and cardioversion rates (8.1% vs 1.9%; P = .024) were higher in the MFT group than CF group. At the final follow-up, sinus rhythm was maintained without antiarrhythmic drugs in 57.7% of the MFT group and 40.6% of the CF group (P = .010). No significant difference was found in the major complication rates between the two groups (0.9% vs 5.7%), although the ablation time was significantly longer in the MFT group (4192.1 ± 1080.2 vs 3583.8 ± 977.2 seconds; P

Biocompatibility is important for the 3D printing of resins used in medical devices and can be affected by photoinitiators, one of the key additives used in the 3D printing process. The choice of ingredients must be considered, as the toxicity varies depending on the photoinitiator, and unreacted photoinitiator may leach out of the polymerized resin. In this study, the use of ethyl (2,4,6-trimethylbenzoyl) phenylphosphinate (TPO-L) as a photoinitiator for the 3D printing of resin was considered for application in medical device production, where the cytotoxicity, colour stability, dimensional accuracy, degree of conversion, and mechanical/physical properties were evaluated. Along with TPO-L, two conventional photoinitiators, phenylbis (2,4,6-trimethylbenzoyl) phosphine oxide (BAPO) and diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide (TPO), were considered. A total of 0.1 mol% of each photoinitiator was mixed with the resin matrix to prepare a resin mixture for 3D printing. The specimens were printed using a direct light processing (DLP) type 3D printer. The 3D-printed specimens were postprocessed and evaluated for cytotoxicity, colour stability, dimensional accuracy, degree of conversion, and mechanical properties in accordance with international standards and the methods described in previous studies. The TPO-L photoinitiator showed excellent biocompatibility and colour stability and possessed with an acceptable dimensional accuracy for use in the 3D printing of resins. Therefore, the TPO-L photoinitiator can be sufficiently used as a photoinitiator for dental 3D-printed resin.

The objective of this study was to evaluate an orthodontic adhesive containing hydrated calcium silicate (hCS) in terms of its bond strength with the enamel surface and its acid-neutralization and apatite-forming abilities.The experimental orthodontic adhesives were composed of 30 wt.% resin matrix and 70 wt.% filler, which itself was a mixture of silanized glass filler and hCS in weight ratios of 100% glass filler (hCS 0), 17.5% hCS (hCS 17.5), 35% hCS (hCS 35.0), and 52.5% hCS (hCS 52.5). The degree of conversion (DC) and shear bond strength (SBS) of bovine enamel surfaces were tested. pH measurements were performed immediately upon submersion of the specimens in a lactic acid solution. The surface precipitates that formed on specimens immersed in phosphate-buffered saline (PBS) were analyzed by scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS) and Raman spectroscopy after 15, 30, and 90 days.The experimental groups exhibited no significant differences in DC and had clinically acceptable SBS values. The hCS-containing groups showed increasing pH values as more hCS was added. hCS 52.5 produced Ca- and P-containing surface precipitates after PBS immersion, and hydroxyapatite deposition was detected after 15, 30, and 90 days.These results suggest that orthodontic adhesives containing hCS are effective for acid neutralization. Furthermore, hCS has an apatite-forming ability for enamel remineralization.The novel orthodontic adhesive containing hCS exhibits a potential clinical benefit against demineralization and enhanced remineralization of the enamel surface around or beneath the orthodontic brackets.

The aim of this study was to evaluate the antimicrobial, stain and protein removal efficacy of denture or orthodontic appliance cleansers using in vitro test methods. Experimental cleansers were applied for experimental time in each evaluation method. To evaluate the microorganism removal efficacy, C. albicans and S. mutans removal rate was calculated from the specimen surface. Stain and protein removal rate was calculated using the spectrophotometer. Experimental cleansers significantly affected the microorganism removal rate for both C. albicans and S. mutans, as well as the stain and protein removal rates, at each experimental time (p0.05). As the application time increased, the stain and protein removal rates of all experimental cleansers significantly increased (p0.05). The present study provided in vitro evaluation methods to assess the efficacy of denture or orthodontic appliance cleansers. Also, manufacturers and researchers can predict clinical outcomes and ensure proper hygiene management of dentures or orthodontic appliances.

Introduction: Whereas, high-power short-duration (HPSD) radiofrequency (RF) ablation is generally used in atrial fibrillation (AF) catheter ablation (CA), its efficacy, safety, and influence on autonomic function have not been well established in a large population. This study compared HPSD-AFCA and conventional power (ConvP)-AFCA in propensity score matched-population.Methods: In 3,045 consecutive patients who underwent AFCA, this study included 1,260 patients (73.9% male, 59 ± 10 years old, 58.2% paroxysmal type) after propensity score matching: 315 in 50~60W HPSD group vs. 945 in the ConvP group. This study investigated the procedural factors, complication rate, rhythm status, and 3-month heart rate variability (HRV) between the two groups and subgroups.Results: Procedure time was considerably short in the HPSD group (135 min in HPSD vs. 181 min in ConvP, p < 0.001) compared to ConvP group, but there was no significant difference in the complication rate (2.9% in HPSD vs. 3.7% in ConvP, p = 0.477) and the 3-month HRV between the two groups. At the one-year follow-up, there was no significant difference in rhythm outcomes between the two groups (Overall, Log-rank p = 0.885; anti-arrhythmic drug free, Log-rank p = 0.673). These efficacy and safety outcomes were consistently similar irrespective of the AF type or ablation lesion set. The Cox regression analysis showed that the left atrium volume index estimated by computed tomography (HR 1.01 [1.00–1.02]), p = 0.003) and extra-pulmonary vein triggers (HR 1.59 [1.03–2.44], p = 0.036) were independently associated with one-year clinical recurrence, whereas the HPSD ablation was not (HR 1.03 [0.73–1.44], p = 0.887).Conclusion: HPSD-AFCA notably reduced the procedure time with similar rhythm outcomes, complication rate, and influence on autonomic function as ConvP-AFCA, irrespective of the AF type or ablation lesion set.

Background: The efficacy of cryoballoon pulmonary vein isolation (Cryo-PVI) is equivalent to that of radiofrequency pulmonary vein isolation in patients with paroxysmal atrial fibrillation (AF). We aimed to compare the efficacy and safety profile of Cryo-PVI and high-power, short-duration (HPSD) radiofrequency catheter ablation (RFCA) in patients with AF. Methods: We prospectively randomized 314 patients with paroxysmal AF (men, 71.3%; 59.9±10.9 years old) to either the Cryo-PVI group (n=156) or HPSD-RFCA group (n=158). Cavotricuspid isthmus ablation and linear ablation from the superior vena cava to the right atrial septum in addition to pulmonary vein isolation were carried out in the majority of patients in the HPSD-RFCA group. The primary end point was AF recurrence after a single procedure; secondary end points were the recurrence pattern, cardioversion rate, follow-up heart rate variability, and response to antiarrhythmic drugs. Results: After a mean follow-up of 9.8±5.1 months, the clinical recurrence rate did not significantly differ between the two groups (log-rank P =0.840). The rate of recurrence as atrial tachycardia ( P >0.999), cardioversion ( P =0.999), and 3-month heart rate variability (high frequency; P =0.506) did not significantly differ. During the final follow-up, sinus rhythm was maintained without antiarrhythmic drugs in 70.5% of the Cryo-PVI group and 73.4% of the HPSD-RFCA group ( P =0.567). No significant difference was found in the major complication rate between the two groups (3.8% versus 0.6%; P =0.066), but total procedure time was significantly shorter in the Cryo-PVI group (78.5±20.2 versus 124.5±37.1 minutes; P Conclusions: In patients with paroxysmal AF, the Cryo-PVI is an effective rhythm-control strategy with a shorter procedure time compared with the HPSD-RFCA. Registration: URL: https://www.clinicaltrials.gov ; Unique identifier: NCT03920917.

The aim of this study is to investigate the resistance of various fluoride-releasing restorative materials against the demineralization and remineralization of enamel surfaces, including those that have been recently introduced to the market. Three different fluoride-releasing restorative materials were considered: glass ionomer (FI), resin-modified glass ionomer (RL), and an alkasite restorative material (CN). The acid neutralization ability was investigated using pH measurement, and the concentrations of released fluoride and calcium ions were measured. Finally, the demineralization resistance and remineralization effects of enamel were observed using a microhardness tester and SEM. CN showed an initial substantial increase in pH followed by a steady increase, with values higher than those of the other groups (p &lt, 0.05). All three groups released fluoride ions, and the CN group released more calcium ions than the other groups (p &lt, 0.05). In the acid resistance test, from the microhardness and SEM images, the CN group showed effective resistance to demineralization. In the remineralization test, the microhardness results showed that the FI and CN groups recovered the microhardness from the values of the demineralized enamel surface (p &lt, 0.05). This was confirmed by the SEM images from remineralization tests, the CN group showed a recovered demineralized surface when immersed in artificial saliva for 7 days. In conclusion, alkasite restorative material can be an effective material when used in cariogenic environments.

The myeloid leukemia factor 2 (MLF2) and T-cell receptor β (TCR-β) genes are associated the development of resistance towards coccidiosis infection. Five single-nucleotide polymorphisms (SNPs) located on these genes (SNP_892 and intron 7 (10) of MLF2 and SNP_88, 434, and 561 of TCR-β) were identified and considered to be the genetic markers for resistance to coccidiosis. In this study, we investigated the association between these SNPs and the body weight of Korean native chicken (KNC) and the possibility of using these SNPs as genetic markers for improving growth in KNCs. KNC specimens (798) were genotyped using high-resolution melting analysis, and single-marker association tests were performed; body weights of KNC were also measured every 2 weeks. Three SNPs [892 and intron 7 (10) of MLF2 and 88 of TCR-β] had significant associations with body weight in some period of growth of KNC. Further, 2 SNPs (434 and 561) of TCR-β were linked and significantly associated with the overall growth of KNCs. Conclusively, the findings of the present study suggested that SNPs in the MLF2 and TCR-β genes could be used as combinations of genetic markers for selecting high growth performance specimens of KNCs.

Background: Persistent atrial fibrillation (AF) can change to paroxysmal AF after antiarrhythmic drug medication and cardioversion. We investigated whether electrical posterior box isolation (POBI) may improve rhythm outcome of catheter ablation in those patient groups. Methods: We prospectively randomized 114 patients with persistent AF to paroxysmal AF (men, 75%; 59.8±9.9 years old) to circumferential pulmonary vein isolation (CPVI) alone group (n=57) and additional POBI group (n=57). Primary end point was AF recurrence after a single procedure, and secondary end points were recurrence pattern, cardioversion rate, and response to antiarrhythmic drugs. Results: After a mean follow-up of 23.8±10.2 months, the clinical recurrence rate did not significantly differ between the CPVI alone and additional POBI group (31.6% versus 28.1%; P =0.682; log-rank P =0.729). The recurrences as atrial tachycardias (5.3% versus 12.3%; P =0.134) and cardioversion rates (5.3% versus 10.5%; P =0.250) were not significantly different between the CPVI and POBI groups. At the final follow-up, sinus rhythm was maintained without antiarrhythmic drug in 52.6% of CPVI group and 59.6% of POBI group ( P =0.450). No significant difference was found in major complication rates between the two groups (5.3% versus 1.8%; P =0.618), but the total ablation time was significantly longer in the POBI group (4187±952 versus 5337±1517 s; P Conclusions: In patients with persistent AF converted to paroxysmal AF by antiarrhythmic drug, the addition of POBI to CPVI did not improve the rhythm outcome of catheter ablation or influence overall safety, while leading to longer ablation time. Registration: URL: https://www.clinicaltrials.gov ; Unique identifier: NCT02176616.

We aimed to evaluate the antimicrobial effects of Glycyrrhiza uralensis extract on Streptococcus mutans and Candida albicans and its biocompatibility for dental applications. The antimicrobial activity of the G. uralensis extracts at concentrations of 50, 100, 150, and 200 &micro, g/mL was assessed using agar disk diffusion tests, counting the total number of colony-forming units (CFUs), spectrophotometric growth inhibitory assays, and microbial morphology observations using scanning electron microscopy (SEM, Merin, Carl Zeiss, Oberkochen, Germany). We measured the polyphenol and flavonoid contents of G. uralensis extracts using ultraviolet&ndash, visible spectrometry and the cytotoxicity of these extracts using an MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. We identified that G. uralensis extracts had significant antimicrobial effects against S. mutans and C. albicans. The optical density of the experimental groups significantly decreased compared with that of the control group. SEM images revealed that the G. uralensis extract affected the morphology and density of S. mutans and C. albicans. The extract concentration of flavonoids, but not polyphenols, increased with increasing concentrations of the G. uralensis extract. Furthermore, cell viabilities were more than 70% for G. uralensis extracts with concentrations of 50 and 100 &mu, g/mL. Naturally derived G. uralensis is biocompatible and exhibits an excellent antimicrobial effect against oral pathogens such as S. mutans and C. albicans. Thus, G. uralensis extracts can be used for the development of oral products that treat and prevent oral diseases.

The objective of this study was to investigate the effects of hydrated calcium silicate filler (hCS) on resin-based pit and fissure sealants&rsquo, acid neutralization, calcium ion release, and mechanical and physical properties. To produce the hCS filler, Portland cement (CS) was mixed with distilled water and ground into fine particles. The particles were then mixed with silanized glass filler and added to a photo-activated resin matrix. To evaluate the acid neutralization and calcium ion release properties, the specimens were immersed in a pH 4.0 lactic acid solution and distilled water for 28 days. Also, the flexural strength, depth of cure, water sorption, and solubility were tested. All of the groups containing hCS and CS required less than one minute to increase the pH from 4.0 to 5.5. With 50% hCS, the calcium ion release was higher than 50% CS in the distilled water at the initial time. The flexural strength and depth of cure decreased according to the increasing proportion of hCS added. The water sorption and solubility had an increasing trend as increasing proportions of hCS were added. These findings showed that pit and fissure sealant containing hCS exhibit superior acid neutralization and calcium release properties, and may be promising for caries-inhibiting dental material.

This study investigated the effectiveness of acid etching and bond strength in an orthodontic bonding system in accordance with various time periods after 1.23% acidulated phosphate fluoride (APF) gel applications. APF gel was applied on the enamel surface of bovine teeth, which were assigned to group F0. The tooth specimens were then immersed in distilled water for 1 (F1), 7 (F7), 14 (F14), 21 (F21) and 28 (F28) days. A group without fluoride pretreatment was a control group. All groups were etched with 35% phosphoric acid and evaluated using a surface hardness tester and scanning electron microscope (SEM). A shear bond strength (SBS) test was performed using a universal testing machine, and the bond failure modes were also examined. After the 1.23% APF gel treatment, the hardness of the acid-etched enamel surface decreased as the immersion period increased. SEM images of the test groups showed etched patterns similar to control group as the immersion period increased. The SBS increased with increasing immersion period, whereas group F21 was not significantly different from the control group. Relatively high adhesive remnant index scores were identified as the ageing period increased. The present study indicated that in order to obtain suitable bond strength, it is recommended to use an acid etching-based bonding system for the fixation of orthodontic appliances on the enamel surface 21 days after the use of APF gel. Fluoride pre-treatment interferes with the acid etching effects on enamel, causing a reduction in the bond strength with orthodontic brackets.

The purpose of the study was to evaluate the adhesion between dental core resin and epoxy resin-based fiber post after treatment with non-thermal atmospheric pressure plasma (NTAPP) and compare with conventional methods of epoxy resin-based fiber post treatments. Contact angle was measured on the surface of epoxy resin before and after NTAPP treatment and X-ray photoelectron spectroscopy was used to analyze the surface chemistry. Finally, two shear bond strength tests were carried out, shear bond strength between core resin and epoxy resin for comparison between NTAPP treated and untreated sample, and push-out shear bond strength between core resin and NTAPP treated commercially available epoxy resin-based fiber post for comparison between NTAPP treated samples with conventionally treated samples. Contact angle on the surface of epoxy resin generally decreased with increasing NTAPP treatment time with presence of surface chemical changes. Also, there was significantly higher shear bond strength and push-out shear bond strength between epoxy resin and core resin for NTAPP treated epoxy resin, even to the conventionally treated epoxy resin-based fiber post with hydrofluoric acid or silane. In conclusion, new technology of NTAPP has potential for application on the epoxy resin-based fiber post to improve endodontic restoration success rate.

We investigated whether extra-pulmonary vein (PV) ablation targeting a high maximal slope of the action potential duration restitution curve (Smax) improves the rhythm outcome of persistent atrial fibrillation (PeAF) ablation.In this open-label, multi-center, randomized, and controlled trial, 178 PeAF patients were randomized with 1:1 ratio to computational modeling-guided virtual Smax ablation (V-Smax) or empirical ablation (E-ABL) groups. Smax maps were generated by computational modeling based on atrial substrate maps acquired during clinical procedures in sinus rhythm. Smax maps were generated during the clinical PV isolation (PVI). The V-Smax group underwent an additional extra-PV ablation after PVI targeting the virtual high Smax sites.After a mean follow-up period of 12.3±5.2 months, the clinical recurrence rates (25.6% vs. 23.9% in the V-Smax and the E-ABL group, p=0.880) or recurrence appearing as atrial tachycardia (11.1% vs. 5.7%, p=0.169) did not differ between the 2 groups. The post-ablation cardioversion rate was higher in the V-Smax group than E-ABL group (14.4% vs. 5.7%, p=0.027). Among antiarrhythmic drug-free patients (n=129), the AF freedom rate was 78.7% in the V-Smax group and 80.9% in the E-ABL group (p=0.776). The total procedure time was longer in the V-Smax group (p=0.008), but no significant difference was found in the major complication rates (p=0.497) between the groups.Unlike a dominant frequency ablation, the computational modeling-guided V-Smax ablation did not improve the rhythm outcome of the PeAF ablation and had a longer procedure time.ClinicalTrials.gov Identifier: NCT02558699.