Search

The polar magnetic fields of the Sun play an important role in governing solar activity and powering fast solar wind. However, because our view of the Sun is limited in the ecliptic plane, the polar regions remain largely uncharted. Using the high spatial resolution and polarimetric precision vector magnetograms observed by Hinode from 2012 to 2021, we investigate the long-term variation of the magnetic fields in polar caps at different latitudes. The Hinode magnetic measurements show that the polarity reversal processes in the north and south polar caps are non-simultaneous. The variation of the averaged radial magnetic flux density reveals that, in each polar cap, the polarity reversal is completed successively from the 70 degree latitude to the pole, reflecting a poleward magnetic flux migration therein. These results clarify the polar magnetic polarity reversal process at different latitudes., Comment: 1 table, 4 figures, published, 2024, Res. Astron. Astrophys., 24, 075015

As a large-scale motion on the Sun, the meridional flow plays an important role in determining magnetic structure and strength and solar cycle. However, the meridional flow near the solar poles is still unclear. The Hinode observations show that the magnetic flux density in polar caps decreases from the lower latitudes to the poles. Using a surface flux transport model, we simulate the global radial magnetic field to explore the physical process leading to the observed polar magnetic distribution pattern. For the first time, the high-resolution observations of the polar magnetic fields observed by Hinode are used to directly constrain the simulation. Our simulation reproduces the observed properties of the polar magnetic fields, suggesting the existence of a counter-cell meridional flow in the solar polar caps with a maximum amplitude of about 3 m s$^{-1}$., Comment: 8 figures, 1 table, ApJ accepted 2024 July 9. Once the article is published, it can be accessed via the URL https://doi.org/10.3847/1538-4357/ad61e2

The solar eruption that occurred on 2023 November 28 (SOL2023-11-28) triggered an intense geomagnetic storm on Earth on 2023 December 1. The associated Earth's auroras manifested at the most southern latitudes in the northern hemisphere observed in the past two decades. In order to explore the profound geoeffectiveness of this event, we conducted a comprehensive analysis of its solar origin to offer potential factors contributing to its impact. Magnetic flux ropes (MFRs) are twisted magnetic structures recognized as significant contributors to coronal mass ejections (CMEs), thereby impacting space weather greatly. In this event, we identified multiple MFRs in the solar active region and observed distinct slipping processes of the three MFRs: MFR1, MFR2, and MFR3. All three MFRs exhibit slipping motions at a speed of 40--137 km s$^{-1}$, extending beyond their original locations. Notably, the slipping of MFR2 extends to $\sim$30 Mm and initiate the eruption of MFR3. Ultimately, MFR1's eruption results in an M3.4-class flare and a CME, while MFR2 and MFR3 collectively produce an M9.8-class flare and another halo CME. This study shows the slipping process in a multi-MFR system, showing how one MFR's slipping can trigger the eruption of another MFR. We propose that the CME--CME interactions caused by multiple MFR eruptions may contribute to the significant geoeffectiveness.

Partial eruptions of solar filaments are the typical representative of solar eruptive behavior diversity. Here we investigate a typical filament partial eruption event and present integrated evidence for configuration of the pre-eruption filament and its formation. The CHASE H$\alpha$ observations reveal structured Doppler velocity distribution within the pre-eruption filament, where distinct redshift only appeared in the east narrow part of the south filament region and then disappeared after the partial eruption while the north part dominated by blueshift remained. Combining the SDO, ASO-S observations, and NLFFF modeling results, we verify that there were two independent material flow systems within the pre-flare filament, whose magnetic topology is a special double-decker configuration consisting of two magnetic flux ropes (MFRs) with opposite magnetic twist. During the formation of this filament system, continuous magnetic flux cancellation and footpoint motion were observed around its north end. Therefore, we propose a new double-decker formation scenario that the two MFRs composing such double-decker configuration originated from two magnetic systems with different initial connections and opposite magnetic twist. Subsequent magnetic reconnection with surrounding newly-emerging fields resulted in the motion of footpoint of the upper MFR to the region around footpoint of the lower MFR, thus leading to eventual formation of the double-decker configuration consisting of two MFRs with similar footpoints but opposite signs of magnetic twist. These results provide a potential way to determine unambiguously the progenitor configuration of a partial-eruptive filament and reveal a special type of double-decker MFR configuration and a new double-decker formation scenario., Comment: 16 pages, 8 figures, 1 table, accepted for publication in ApJ as part of the Focus Issue "Early results from the Chinese Ha Solar Explorer (CHASE)"

The occurrence of X-class solar flares and their potential impact on the space weather often receive great attention than other flares. But predicting when and where an X-class flare will occur is still a challenge. With the multi-wavelength observation from the Solar Dynamics Observatory and FengYun- 3E satellite, we investigate the triggering of a GOES X1.0 flare occurring in the NOAA active region (AR) 12887. Our results show that this unique X-class flare is bred in a relatively small but complex quadrupolar AR. Before the X-class flare, two filaments (F1 and F2) exist below a null-point topology of the quadrupolar AR. Magnetic field extrapolation and observation reveal that F1 and F2 correspond to two magnetic flux ropes with the same chirality and their adjacent feet rooted at nonconjugated opposite polarities, respectively. Interestingly, these two polarities collide rapidly, accompanied by photospheric magnetic flux emergence, cancellation and shear motion in the AR center. Above this site, F1 and F2 subsequently intersect and merge to a longer filament (F3) via a tether-cutting-like reconnection process. As a result, the F3 rises and erupts, involving the large-scale arcades overlying filament and the quadrupolar magnetic field above the AR, and eventually leads to the eruption of the X-class flare with a quasi-X-shaped flare ribbon and a coronal mass ejection. It suggests that the rapid collision of nonconjugated opposite polarities provides a key condition for the triggering of this X-class flare, and also provides a featured case for flare trigger mechanism and space weather forecasting., Comment: 24 pages, 7 figures, accepted for publication in ApJ

The extreme ultraviolet (EUV) observations are widely used in solar activity research and space weather forecasting since they can observe both the solar eruptions and the source regions of the solar wind. Flat field processing is indispensable to remove the instrumental non-uniformity of a solar EUV imager in producing high-quality scientific data from original observed data. Fengyun-3E (FY-3E) is a meteorological satellite operated in Sun-synchronous orbit, and the routine EUV imaging data from the Solar X-ray and Extreme Ultraviolet Imager (X-EUVI) onboard FY-3E has the characteristics of concentric rotation. Taking advantage of the concentric rotation, we propose a post-hoc flat field measurement method for its EUV 195 channel in this paper. This method removes small-scale and time-varying component of the coronal activities by taking the median value for each pixel along the time axis of a concentric rotation data cube, and then derives large-scale and invariable component of the quiet coronal radiation, and finally generates a flat field image. Analysis shows that our method is able to measure the instrumental spot-like non-uniformity possibly caused by contamination on the detector, which mostly disappears after the in-orbit self-cleaning process. It can also measure the quasi-periodic grid-like non-uniformity, possibly from the obscuration of the support mesh on the rear filter. After flat field correction, these instrumental non-uniformities from the original data are effectively removed. X-EUVI 195 data after dark and flat field corrections are consistent with the 193 channel data from SDO/AIA, verifying the suitability of the method. Our method is not only suitable for FY-3E/X-EUVI but also a candidate method for the flat field measurement of future solar EUV telescopes., Comment: 14 pages, 6 figures, Accepted for publication in RAA (Research in Astronomy and Astrophysics)

We present a case study for the global extreme ultraviolet (EUV) wave and its chromospheric counterpart `Moreton-Ramsey wave' associated with the second X-class flare in Solar Cycle 25 and a halo coronal mass ejection (CME). The EUV wave was observed in the H$\alpha$ and EUV passbands with different characteristic temperatures. In the 171 {\AA} and 193/195 {\AA} images, the wave propagates circularly with an initial velocity of 600-720 km s$^{-1}$ and a deceleration of 110-320 m s$^{-2}$. The local coronal plasma is heated from log(T/K)=5.9 to log(T/K)=6.2 during the passage of the wavefront. The H$\alpha$ and 304 {\AA} images also reveal signatures of wave propagation with a velocity of 310-540 km s$^{-1}$. With multi-wavelength and dual-perspective observations, we found that the wavefront likely propagates forwardly inclined to the solar surface with a tilt angle of ~53.2$^{\circ}$. Our results suggest that this EUV wave is a fast-mode magnetohydrodynamic wave or shock driven by the expansion of the associated CME, whose wavefront is likely a dome-shaped structure that could impact the upper chromosphere, transition region and corona., Comment: Accepted by ApJ, 15 pages, and 7 figures

Combining the Solar Dynamics Observatory and the New Vacuum Solar Telescope observations, we study a confined flare triggered by a rising flux rope within the trailing sunspots of active region 12733. The flux rope lying above the sheared polarity inversion line can be constructed through magnetic extrapolation but could not be detected in multi-wavelength images at the pre-flare stage. The conspicuous shearing motions between the opposite-polarity fields in the photosphere are considered to be responsible for the flux rope formation. The maximum twist of the flux rope is as high as -1.76, and then the flux rope rises due to the kink instability. Only when the flare starts can the flux rope be observed in high-temperature wavelengths. The differential emission measure results confirm that this flux rope is a high-temperature structure. Associated with the rising flux rope, there appear many post-flare loops and a pair of flare ribbons. When the rising flux rope meets and reconnects with the large-scale overlying field lines, a set of large-scale twisted loops are formed, and two flare ribbons propagating in opposite directions appear on the outskirts of the former ribbons, indicating that the twist of the flux rope is transferred to a much larger system. These results imply that the external reconnection between the rising flux rope and the large-scale overlying loops plays an important role in the confined flare formation., Comment: Accepted for publication in ApJ

The purpose of this paper is to show that large active regions (ARs) with different magnetic configurations have different contributions to short-term and long-term variations of the Sun. As a case study, the complex $\delta$-type AR 12673 and the simple $\beta$-type AR 12674 are investigated in detail. Since the axial dipole moment at cycle minimum determines the amplitude of the subsequent cycle and space climate, we have assimilated the individual observed magnetic configurations of these two ARs into a surface flux transport model to compare their contributions to the axial dipole moment $D$. We find that AR 12673 has a significant effect on $D$ at the end of the cycle, making it weaker because of the abnormal and complicated magnetic polarities. An initial strongly positive $D$ ends up with a strongly negative value. The flare-poor AR 12674 has a greater contribution to the long-term axial dipole moment than the flare-rich AR 12673. We then carry out a statistical analysis of ARs larger than 800 $\mu$Hem from 1976 to 2017. We use the flare index FI and define an axial dipole moment index DI to quantify the effects of each AR on space weather and space climate, respectively. Whereas the FI has a strong dependence on the magnetic configuration, the DI shows no such dependence. The DI is mainly determined by the latitudinal location and the latitudinal separation of the positive and negative magnetic fluxes of the ARs. Simple ARs have the same possibility as complex ARs to produce big DI values affecting space climate., Comment: 18 pages, 8 figures, Accepted for publication in the Astrophysical Journal

Solar active region (AR) 12673 produced 4 X-class, 27 M-class, and numerous lower class flares during its passage across the visible solar disk in September 2017. Our study is to answer the questions why this AR was so flare-productive and how the X9.3 flare, the largest one of the last decade, took place. We find that there was a sunspot in the initial several days, and then two bipolar regions emerged nearby it successively. Due to the standing of the pre-existing sunspot, the movement of the bipoles was blocked, while the pre-existing sunspot maintained its quasi-circular shaped umbra only with the disappearance of a part of penumbra. Thus, the bipolar patches were significantly distorted, and the opposite polarities formed two semi-circular shaped structures. After that, two sequences of new bipolar regions emerged within the narrow semi-circular zone, and the bipolar patches separated along the curved channel. The new bipoles sheared and interacted with the previous ones, forming a complex topological system, during which numerous flares occurred. At the highly sheared region, a great deal of free energy was accumulated. On September 6, one negative patch near the polarity inversion line began to rapidly rotate and shear with the surrounding positive fields, and consequently the X9.3 flare erupted. Our results reveal that the block-induced complex structures built the flare-productive AR and the X9.3 flare was triggered by an erupting filament due to the kink instability. To better illustrate this process, a block-induced eruption model is proposed for the first time., Comment: 7 pages, 1 table, 4 figures, accepted for publication in ApJL

Hybrid quantum systems can often be described in terms of polaritons. These are quasiparticles formed of superpositions of their constituents, with relative weights depending on some control parameter in their interaction. In many cases, these constituents are coupled to reservoirs at different temperatures. This suggests a general approach to the realization of polaritonic heat engines where a thermodynamic cycle is realized by tuning this control parameter. Here we discuss what is arguably the simplest such engine, a single qubit coupled to a single photon. We show that this system can extract work from feeble thermal microwave fields. We also propose a quantum measurement scheme of the work and evaluate its back-action on the operation of the engine., Comment: 8 pages, 4 figures, new contents added

Solar post-flare loops (PFLs) are arcade-like loop systems that appear during the gradual phases of eruptive flares. The extreme ultraviolet (EUV) observations from the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO) allow us to investigate the fine structures in PFLs. In this work, we focus on studying the dark post-flare loops (DPFLs) during X-class flares, which are more evident in SDO/AIA data than in previous EUV data. We identify and analyze the DPFLs observed by SDO and find that: (1) the DPFLs of an X5.4 flare have an average lifetime of 10.0 $\pm$ 5.5 minutes, an average width of 1022 $\pm$ 339 km, and an average maximum length of 33 $\pm$ 10 Mm, (2) blob-like falling features with a size close to the resolution of SDO/AIA are identified in the DPFLs and they have an average velocity of 76 $\pm$ 19 km s$^{-1}$, and (3) the average widths of the DPFLs slightly increase with the characteristic temperatures in AIA 304, 171, 193, and 211 {\AA} channels. Our investigation shows that DPFLs are found in all of the 20 cases within this study, which suggests that they are a common phenomenon in X-class flares and are probably produced by the same mechanism that creates coronal rain., Comment: 28 pages, 6 figures. Accepted for publication in ApJ