Search

This study investigates the improvements in direct compaction powder properties achieved through particle design using laboratory and pilot-scale spray dryers. Hydroxypropyl methylcellulose and polyvinylpyrrolidone were used as modifying agent, which have low hygroscopicity and surface tension, good flowability, and excellent compactibility. Ammonium bicarbonate and sodium bicarbonate were used as pore-forming agents, and the composite particles were prepared using laboratory and pilot-scale spray dryers. The results showed that the structure of the composite particles and porous particles can effectively improve the flowability, tabletability, and disintegration behaviour; the composite particles prepared by laboratory-scale spray drying have better tabletability; the composite particles prepared by spray drying at pilot-scale had better flowability. In summary, there are significant differences in the properties of products prepared by different scales of spray drying. It will be beneficial to choose the appropriate equipment and the appropriate experimental design. Consequently, this study may contribute to the development of natural plant tablets., Competing Interests: Declarations. Conflict of interest: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024. The Author(s), under exclusive licence to American Association of Pharmaceutical Scientists.)

As the key interface, the nitrate removal capacity of riparian zones is receiving close attention. Although naturally occurring organic compounds in this environment play a pivotal role in shaping microbial communities and influencing the nitrate removal capacity, the relevant research is inadequate. Given the complexity of riparian environments, in this study, we added representative natural organic matter (fulvic acid, butyric acid, naphthalene, starch, and sodium bicarbonate) as carbon conditions and incorporated magnetite to simulate riparian zone components. The study investigated the nitrate degradation efficiency and microbial responses under different natural carbon conditions in real iron-containing environments. Butyric acid exhibited the most efficient nitrate reduction, followed in descending order by naphthalene, starch, sodium bicarbonate, and humic acid. However, this did not imply that butyric acid efficiently removed nitrogen; instead, the nitrogen would circulate in the environment in the form of ammonium. Denitrification and DNRA were the primary drivers of nitrate reduction in each system, while naphthalene and humic acid systems also exhibited nitrification and mineralization. Nitrogen-fixing bacteria represent a unique microbial community in the butyrate system. Further, the synergistic degradation of naphthalene and nitrate demonstrated significant potential applications. High-throughput sequencing revealed that carbon conditions exerted selective pressure on microorganisms, driving Fe (Ⅱ)/Fe (Ⅲ) transformation by shaping the microbial community structure and influencing the nitrogen cycling process., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Organic ligands have been extensively used to enhance the catalytic performance of manganese ion (Mn(II)) for peracetic acid (PAA). In this study, sodium bicarbonate (NaHCO 3 ), an economical and eco-friendly inorganic ligand, was introduced to enhance the degradation of emerging contaminants (ECs) in the Mn(II)/PAA process. NaHCO 3 could significantly improve the oxidizing ability of the Mn(II)/PAA process over the initial pH range of 3.0-11.0. Mn(V) was identified as the primary reactive species for degrading naproxen in the NaHCO 3 /Mn(II)/PAA process. HCO 3 - could complex with Mn(II) to generate Mn(II)-HCO 3 - , which has a lower redox potential to enhance the catalytic activity of Mn(II). Mn(II)-HCO 3 - reacted with PAA to produce Mn(III)-HCO 3 - and CH 3 C(O)O • . Mn(V)-HCO 3 - was generated via two-electron transfer between Mn(III)-HCO 3 - and PAA. Although organic radicals were detected in the NaHCO 3 /Mn(II)/PAA process, naproxen was mainly degraded by Mn(V)-HCO 3 - via one-electron transfer along with the formation of MnO 2 . Notably, the coexisting hydrogen peroxide was vital in the reduction of MnO 2 to Mn(II/III), thereby enhancing the continuous generation of Mn(V)-HCO 3 - . NaHCO 3 /Mn(II)/PAA process exhibited exceptional oxidation performance in actual water samples. This study proposed a strategy utilizing an eco-friendly inorganic ligand to address the inherent drawbacks of organic ligand-enhanced Mn(II)/PAA processes and highlighted its potential applications in the removal of ECs.

To know the influence of lauric acid (LA) on wheat flour fresh noodles (WFN) quality and the latent mechanism, the effect of LA on cooking properties, digestibility and structure of WFN with/without sodium bicarbonate (SB) and the properties of wheat flour (WF) with/without SB were studied. The results indicated that LA reduced cooking loss and digestibility of WFN with SB and slightly decreased water adsorption and increased the free water binding ability and hardness of WFN without SB. Furthermore, LA increased the degree of short- and long-range order and molecular weight of starch in cooked WFN with/without SB and it had greater effect on the degree of short- and long-range order and molecular weight of starch in cooked WFN with SB than that without SB. Differential scanning calorimeter (DSC) and rapid viscosity analysis (RVA) displayed that WFN with LA and SB formed more starch-LA or/and starch-LA-protein complexes than WFN with LA. Additionally, the impact of LA on WFN quality and WF properties was influenced by SB concentration. This study will provide theoretical basis and new thoughts for the design of high-quality fresh noodles with low digestibility, low cooking loss and high hardness., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Lithium supply risk is increasing and driving rapid progress in lithium recovery schemes from spent lithium-ion batteries (LIBs). In this study, a facile recycling process consisting mainly of reduction roasting and NaHCO 3 leaching was adopted to improve lithium recovery. The Li of spent LiNi x Co y Mn 1- x - y O 2 powder were converted to Li 2 CO 3 and LiAlO 2 with the reduction effect of C and residual Al in the roasting process. NaHCO 3 leaching was utilized to selectively dissolve lithium from Li 2 CO 3 and water-insoluble LiAlO 2 . The activation energy of NaHCO 3 leaching was 9.31 kJ∙mol -1 and the leaching of lithium was a diffusion control reaction. More than 95.19 % lithium was leached and recovered as a Li 2 CO 3 product with a purity of 99.80 %. Thus, this approach provides a green path to selective recovery of lithium with good economics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: Complex phosphates (CP) can improve the physicochemical properties and gelation properties of myofibrillar fibrous protein (MP) in mixed meat products, but an excessive intake of phosphates over a long period of time is harmful to health. The present study investigated the effects of partial or complete substitution of CP with sodium bicarbonate (SB) on the physicochemical properties and gel properties of beef-pork-chicken mixed myofibrillar protein (BPC-MP), aiming to evaluate the feasibility of this method in reducing the amount of phosphate in mixed meat products., Results: Under the optimal substitution conditions, the turbidity of BPC-MP was reduced by 37.8%, the net negative potential was increased by 28.9% and the modulus of elasticity (G') was increased. The tertiary structure indexes of protein (including fluorescence intensity, surface hydrophobicity and active thiol content) were significantly changed, whereas the α-helix and β-turn angle contents in the secondary structure of protein were significantly increased. In addition, the water retention ability and strength of gel were also improved, which were increased by 20.7% and 42.6%, respectively. The results of scanning electron microscopy showed that the SB substitution group had a more compact and ordered microstructure., Conclusion: The results showed that partial substitution of CP with SB reduced the amount of phosphate added to BPC-MP and had a positive effect on the physicochemical and gel properties of BPC-MP. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

The development of an efficient and environmentally friendly dust suppressant is crucial to address the issue of dust pollution in limestone mines. Leveraging the synergistic microbial-induced calcium carbonate precipitation (MICP) technology involving NaHCO 3 and dodecyl glucoside (APG), the optimal ratio of the dust suppressant was determined through single-factor and response surface tests. The dust suppression efficacy and mechanisms were analyzed through performance testing and microscopic imaging techniques, indicating that the optimal ratio of the new microbial dust suppressant was 20% mineralized bacteria cultured for 72 h, 0.647 mol L -1 cementing solution, 3.142% NaHCO 3 , and 0.149% APG. Under these conditions, the yield of calcium carbonate increased by 24.89% as compared to when no NaHCO 3 was added. The dust suppressant demonstrated excellent wind, moisture, and rain resistance, as well as curing ability. More calcite was formed in the dust samples after treatment, and the stable form of the dust suppressant contributed to consolidating the limestone dust into a cohesive mass. These findings indicate that the synergistic effect of NaHCO 3 and APG significantly enhanced the dust suppression capabilities of the designed microbial dust suppressant., (© 2024. The Author(s), under exclusive licence to Springer Nature B.V.)

As a nutraceutical, bovine lactoferrin (bLf), an iron-binding glycoprotein involved in innate immunity, is gaining elevated attention for its ability to exert pleiotropic functions and to be exceptionally tolerated even at high dosages. Some of bLf's activities, including its anti-inflammatory and antioxidant, are tightly linked to its ability to both chelate iron and enter inside the cell nucleus. Here, we present data about Valpalf ® , a new formulation containing bLf, sodium citrate, and sodium bicarbonate at a molar ratio of 10 -3 . In the present study, Valpalf ® exhibits superior iron-binding capacity, resistance to tryptic digestion, and a greater capacity to accumulate into the nucleus over time when compared to the native bLf alone. In agreement, Valpalf ® effectively reduces interleukin(IL)-6 levels in lipopolysaccharide-stimulated macrophages and modulates the expression of antioxidant enzymes, such as superoxide dismutase 1 and 2, in phorbol-12-myristate-13-acetate-stimulated monocytes. Of note, this potentiated bioactivity was corroborated in a retrospective study on the treatment of anemia of inflammation in hereditary thrombophilic pregnant and non-pregnant women, demonstrating that Valpalf ® improves hematological parameters and reduces serum IL-6 levels to a higher extent than bLf alone.

Developing the delivery systems with high therapeutic efficacy and low side effects is of great interest and significance for anticancer therapy. Compared to the high cost in synthesizing new chemotherapeutic drugs, exploring the anticancer potentials of existing chemicals is more convenient and efficient. Sodium bicarbonate (BC), a simple inorganic salt, has shown its tumor inhibition capacity via regulating the acidity of tumor microenvironment. However, the effects of intracytoplasmic BC on tumor growth and the potentials of BC to serve as an anticancer agent are still unknown. Herein, we developed a BC-loaded cationic liposome system (BC-CLP) to deliver BC into the cytosol of cancer cells. The in vitro studies showed that the BC-CLP containing 1% BC (w/v) had a size of 112.9 nm and a zeta potential of 19.1 mV, which reduced the viability of the model cancer cells (human oral squamous cell carcinoma HSC-3 cells) to 13.7%. In contrast, the neutral BC-LP caused less than 50% viability reduction. We further found that BC-CLP released BC directly into cytoplasm via membrane fusion pathway rather than endocytosis, leading to the remarkable increase of cytosolic pH, which may contribute to the anticancer effect of BC-CLP. Our findings indicate that BC-CLP is a potential system for high-efficiency cancer therapy without causing drug-related side effects or resistance., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In the osteoporotic microenvironment, the acidic microenvironment generated by excessive osteoclasts not only causes irreversible bone mineral dissolution, but also promotes reactive oxygen species (ROS) production to induce osteoblast senescence and excessive receptor activator of nuclear factor kappa-B ligand (RANKL) production, which help to generate more osteoclasts. Hence, targeting the acidic microenvironment and RANKL production may break this vicious cycle to rescue osteoporosis. To achieve this, an acid-responsive and neutralizing system with high in vivo gene editing capacity is developed by loading sodium bicarbonate (NaHCO 3 ) and RANKL-CRISPR/Cas9 (RC) plasmid in a metal-organic framework. This results showed ZIF8-NaHCO 3 @Cas9 (ZNC) effective neutralized acidic microenvironment and inhibited ROS production . Surprisingly, nanoparticles loaded with NaHCO 3 and plasmids show higher transfection efficiency in the acidic environments as compared to the ones loaded with plasmid only. Finally, micro-CT proves complete reversal of bone volume in ovariectomized mice after ZNC injection into the bone remodeling site. Overall, the newly developed nanoparticles show strong effect in neutralizing the acidic microenvironment to achieve bone protection through promoting osteogenesis and inhibiting osteolysis in a bidirectional manner. This study provides new insights into the treatment of osteoporosis for biomedical and clinical therapies., (© 2023 Wiley‐VCH GmbH.)

Background: Diltiazem hydrochloride is a calcium channel-blocker with a plasma elimination half-life of 4.4 ± 1.3 h and has a narrow absorption window. So, this work aimed to prepare a gastro-retentive floating matrix tablet., Methods: The direct compression method was used to manufacture tablets. 3 2 factorial design was applied for optimization, taking Hydroxypropyl Methylcellulose K100M (HPMC K 100M) and the amount of sodium bicarbonate as independent factors and cumulative percentage release at 1 h, at 6 h, and at 12 h and floating lag time as dependent variables., Results: The high amount of HPMC K100M and sodium bicarbonate shows good results. The optimized preparation was evaluated for differential scanning calorimetry, in-vivo gastric retention in male albino rabbits, kinetic modeling, and stability study. An in vivo study revealed gastric retention of tablets up to 6 h in healthy male Albino rabbits. The stability study indicated no significant change in the buoyancy and release profiles of the drug., Conclusion: From this study, it can be concluded that the gastro-retentive diltiazem hydrochloride floating matrix tablet was successfully prepared and retained inside the rabbit stomach for up to 6 h and was stable under accelerated stability study., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

The aim of this study was to compare two different imaging methods by assessing changes caused by sodium bicarbonate and glycine air polishing on the tooth surfaces. Fourteen single root teeth with exposed root surfaces were included into the study. The teeth were randomly divided into two groups: sodium bicarbonate and glycine group. Samples were scanned in a micro-computed tomography (micro-CT) and CAD/CAM (computer-aided design/computer-aided manufacturing) at baseline and then after air-polishing powder applications, the defect volume values were evaluated. There was a statistically significant difference between mean defect volume values that occurred after glycine and sodium bicarbonate air polishing evaluated with micro-CT and CAD/CAM (p < 0.05). After sodium bicarbonate air polishing, defect volume on enamel surface at maximum power and defect volume on the exposed root surface at medium power values calculated with CAD/CAM were higher. After glycine air polishing, defect volume values on both surfaces at medium power setting calculated with CAD/CAM were lower. Defect volume values on enamel surface at maximum power setting calculated with CAD/CAM were higher than calculated with micro-CT. We concluded that CAD/CAM cannot provide as accurate results as micro-CT. Glycine-based powder is less abrasive than sodium bicarbonate, especially on enamel surface. Lay Description: Micro-CT is a non-destructive imaging method with high resolution and allows to examine all tooth structures individually. CAD/CAM are systems that are widely used in dentistry today. Access to the device is easier than micro-CT. Intraoral scanners in CAD/CAM systems also provide non-destructive image scanning. The aim of this study was to compare two different imaging methods by assessing changes caused by sodium bicarbonate and glycine air polishing on the tooth surfaces. The results showed that because of the analyses made with CAD/CAM, similar results could not be obtained with micro-CT and cannot be used to evaluate the changes that occur after air polishing., (© 2022 Royal Microscopical Society.)

Mesoporous silica network nanotubes were fabricated using both organic and inorganic templates such as citric acid (CA), cetyltrimethylammonium bromide (CTAB), and sodium bicarbonate (SBC). The phase analysis of synthesized silica network was confirmed by X-ray diffractometer (XRD) analysis, and the present functional groups were revealed by Fourier Transform Infrared Spectroscopy (FTIR) and the formation of tubular morphology was analyzed by transmission electron microscopy (TEM). The mesoporous nature of each template sample was studied using Brunauer-Emmett-Teller (BET) instrument. The surface area and porous size were calculated successfully for fabricated silica network nanotubes., (© 2021. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

This study investigated the influence of NaHCO 3 on the water state, gluten polymerization, microstructure and quality of frozen steamed bread dough during freeze-thaw cycles. Results showed that the steamed bread made from alkaline (0.4% NaHCO 3 ) frozen dough possessed a larger specific volume and smaller hardness after 4 freeze-thaw cycles, than the non-alkaline dough group. The addition of NaHCO 3 slowed the increase of freezable water content and water mobility of dough during freeze-thaw cycles, and the high amount of NaHCO 3 (0.4%-1%) showed the great effect. Compared with non-alkaline dough, the sodium dodecyl sulfate extractable protein proportion and free sulfhydryl level of alkaline dough increased less after freeze-thaw cycles, indicating a strengthened freeze-thaw tolerance of alkaline dough. Based on microstructure image and corresponding protein network analysis (PNA) results, the protein area and total protein length in alkaline dough remained at a higher level than non-alkaline group after 4 freeze-thaw cycles., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

To investigate the effect of sodium bicarbonate instead of sodium chloride, the changes in pH, turbidity, aggregation, and conformation of myofibrillar protein solution with various amounts of sodium chloride and sodium bicarbonate were studied. When the sodium bicarbonate was increased from 0% to 0.4%, accompanied by the sodium chloride being decreased from 2.0% to 0.8%, the pH increased about 1.20 unites; the absolute values of the Zeta potential, active sulfhydryl, and surface hydrophobicity increased significantly (p < 0.05); and the turbidity, particle size, and Ca 2+ -ATPase activity decreased significantly (p < 0.05). In addition, the Mg 2+ -ATPase activity was not significantly different (p > 0.05) when increasing sodium bicarbonate, implying that sodium bicarbonate did not affect the actin. Overall, the results indicated that an increase in sodium bicarbonate could improve solubility, expose more hydrophobic residues and sulfhydryl groups, and induce Ca 2+ -ATPase inactivation and protein unfolding, leading the myofibrillar protein to denaturation easily., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The timing of sodium bicarbonate (NaHCO3) supplementation has been suggested to be most optimal when coincided with a personal time that bicarbonate (HCO3-) or pH peaks in the blood following ingestion. However, the ergogenic mechanisms supporting this ingestion strategy are strongly contested. It is therefore plausible that NaHCO3 may be ergogenic by causing beneficial shifts in the strong ion difference (SID), though the time course of this blood acid base balance variable is yet to be investigated. Twelve highly trained, adolescent swimmers (age: 15.9 ± 1.0 years, body mass: 65.3 ± 9.6 kg) consumed their typical pre-competition nutrition 1-3 hours before ingesting 0.3 g∙kg BM-1 NaHCO3 in gelatine capsules. Capillary blood samples were then taken during seated rest on nine occasions (0, 60, 75, 90, 105, 120, 135, 150, 165 min post-ingestion) to identify the time course changes in HCO3-, pH, and the SID. No significant differences were found in the time to peak of each blood measure (HCO3-: 130 ± 35 min, pH: 120 ± 38 min, SID: 98 ± 37 min; p = 0.08); however, a large effect size was calculated between time to peak HCO3- and the SID (g = 0.88). Considering that a difference between time to peak blood HCO3- and the SID was identified in adolescents, future research should compare the ergogenic effects of these two individualized NaHCO3 ingestion strategies compared to a traditional, standardized approach., Competing Interests: The commercial affiliation of RJC does not alter our adherence to PLOS ONE policies on sharing data and materials.

Sodium bicarbonate medium ultrasound pre-treatment can enhance the freeze-drying process of blueberries, but the quality of dried products cannot meet the actual production needs. To yield higher quality products, chitosan coating was applied in blueberry sodium bicarbonate medium ultrasound pre-treatment enhanced freeze-drying process. The improvement effect of different chitosan coating methodologies on the procedure of blueberry freeze-drying, enhanced by ultrasound pre-treatment in sodium bicarbonate medium, was investigated. These include: chitosan solution soaking alone (CH-A), chitosan medium ultrasound treatment (US-CH), first sodium bicarbonate medium ultrasound treatment then chitosan solution soaking (US-NaHCO 3 + CH) and first sodium bicarbonate soaking followed by chitosan medium ultrasound treatment (NaHCO 3 + US-CH). While the treatments that presoaking in sodium bicarbonate solution (NaHCO 3 -A), water medium ultrasound treatment (US-W) and sodium bicarbonate medium ultrasound treatment (US-NaHCO 3 ) were used as the control groups. Results demonstrated that ultrasound treatment and sodium bicarbonate soaking have positive effect on improving the freeze-drying characteristics of blueberries, while chitosan coating has a negative effect. Chitosan coating has a significant effect on strengthening limit effect of blueberry skin on juice overflow and weakening moisture absorption capacity of dried blueberry. US-NaHCO 3 + CH pretreatment yielded the best results for blueberry freeze-drying., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Ranitidine HCl, a selective, competitive histamine H2-receptor antagonist with a short biological half-life, low bioavailability and narrow absorption window, is an ideal candidate for gastro-retentive drug delivery system (GRDDS). Controlled release with an optimum retentive formulation in the upper stomach would be an ideal formulation for this drug. The aim of the present study was therefore to develop, formulate and optimize floating, bioadhesive, and swellable matrix tablets of ranitidine HCl. The matrix tablets were prepared using a combination of hydroxypropyl methylcellulose (HPMC) and sodium carboxymethyl cellulose (NaCMC) as release retarding polymers, sodium bicarbonate (NaHCO3) as gas generating agent and microcrystalline cellulose (MCC) as direct compression diluent. Central composite design (CCD) was used to optimize the formulation and a total of thirteen formulations were prepared. Concentration of HPMC/NaCMC (3:1) (X1) and NaHCO3 (X2) were selected as independent variables; and floating lag time (Y1), bioadhesive strength (Y2), swelling index at 12 h (Y3), cumulative drug release at 1 h (Y4), time to 50% drug release (t50%) (Y5) and cumulative drug release at 12 h (Y6) were taken as the response variables. The optimized batch showed floating lag time of 5.09 sec, bioadhesive strength of 29.69 g, swelling index of 315.04% at 12 h, t50% of 3.86 h and drug release of 24.21% and 93.65% at 1h and 12 h, respectively, with anomalous release mechanism. The results indicate that sustained release matrix tablet of ranitidine HCl with combined floating, bioadhesive and swelling gastro-retentive properties can be considered as a strategy to overcome the low bioavailability and in vivo variation associated with the conventional ranitidine HCl tablet., Competing Interests: The authors have declared that no competing interests exist.

Lactic acid in the tumor microenvironment is highly correlated with the prognosis of tumor chemoembolization, but there are limited clinical strategies to deal with it. To improve the efficacy, NaHCO 3 nanoparticles are innovatively introduced into drug-loaded microspheres to neutralize lactic acid in the tumor microenvironment. Here we showed that multifunctional ethyl cellulose microspheres dual-loaded with doxorubicin (DOX) and NaHCO 3 nanoparticles (DOX/NaHCO 3 -MS) presented excellent antitumor effects by improving the pH of the tumor microenvironment. The homeostasis of the tumor microenvironment was continuously disturbed due to the sustained release of NaHCO 3 nanoparticles, which also led to a significant increase in tumor cell apoptosis (compared with the control and DOX-MS groups). We also showed that the administration of DOX/NaHCO 3 -MS via the hepatic artery in a rabbit model of VX2 orthotopic liver cancer resulted in optimal antitumor efficacy, and the area of tumor necrosis at the embolization site was significantly increased and the proliferation of tumor cells was significantly weakened. The designed DOX/NaHCO 3 -MS exhibited strong synergistic antitumor effects of embolization, chemotherapy, and tumor microenvironment improvement. The present microspheres provided a strategy for the enhancement of the chemoembolization of hepatocellular carcinoma, which could also be extended to other clinical embolization treatments for blood-rich solid tumors.

Ochratoxin A (OTA) is a potential human carcinogen that poses a significant concern in food safety and public health. OTA has been found in a wide variety of agricultural commodities, including cereal grains. This study investigated the reduction of OTA during the preparation of rice- and oat-based porridge by a simulated indirect steam process. The effects of sodium bicarbonate (NaHCO 3 ) and fructose on the reduction of OTA were also investigated. During the processing, OTA in rice- and oat-porridge was decreased by 59% and 14%, respectively, from initial OTA artificially added at 20 μg/kg (dry weight basis). When 0.5% and 1% of sodium bicarbonate were added to rice porridge, increased reduction of OTA was observed as 78% and 68%, respectively. The same amounts of added sodium bicarbonate also further reduced OTA in oat porridge to 58% and 72%, respectively. In addition, increased reduction of OTA in the presence of fructose was observed. A combination of the two, i.e., 0.5% sodium bicarbonate and 0.5% fructose, resulted in a 79% and 67% reduction in rice porridge and oat porridge, respectively. These results indicate that indirect steaming may effectively reduce OTA in preparation of porridge-type products, particularly when sodium bicarbonate and/or fructose are added.

Objective: This study aims to investigate the variations in publicly available nasal irrigation recipes published in the United Kingdom (UK)., Design: Internet searches used to identify eligible nasal irrigation recipes. These were then examined for their physical and biochemical properties, through theoretical calculations and experimental measurement., Setting: Recipes produced by healthcare providers or official national bodies in the UK., Participants: No human participants., Main Outcome Measures: Solution osmolality (classified into hypo-, iso- and hypertonic), acidity (pH) and specific gravity., Results: Thirteen unique recipes were identified from 17 sources. Osmolality ranged from 166.2 to 1492.2 mosmol/kg in volumes ranging from 142 to 1136 mLs (isotonic range 275-295 mosmol/kg). Specific gravity ranged from 1.006 to 1.034. pH ranged from 7.74 to 8.11. No recipe produced a solution with isotonic properties. The majority produced hypertonic irrigations., Conclusions: Most publicly available nasal irrigation recipes produce hypertonic solutions but there is great variability in the osmolality and volume. UK organisations should take action to review published recipes to bring these into alignment with latest guidelines (recommending against hypertonic saline use) and reduce variability in patient interpretations., (© 2020 John Wiley & Sons Ltd.)

In this work, we present a novel ex situ modification of bacterial cellulose (BC) polymer, that significantly improves its ability to absorb water after drying. The method involves a single inexpensive and easy-to-perform process of BC crosslinking, using citric acid along with catalysts, such as disodium phosphate, sodium bicarbonate, ammonium bicarbonate or their mixtures. In particular, the mixture of disodium phosphate and sodium bicarbonate was the most promising, yielding significantly greater water capacity (over 5 times higher as compared to the unmodified BC) and slower water release (over 6 times as compared to the unmodified BC). Further, our optimized crosslinked BC had over 1.5x higher water capacity than modern commercial dressings dedicated to highly exuding wounds, while exhibiting no cytotoxic effects against fibroblast cell line L929 in vitro. Therefore, our novel BC biomaterial may find application in super-absorbent dressings, designed for chronic wounds with imbalanced moisture level., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

It is critical to investigate the adaptive development and the physiological mechanism of fish in external stimulation. In this study, the response of Barbus capito to salinity-alkalinity exposure was explored by high-throughput nontargeted and liquid chromatography-mass spectrometry-based metabolomics to investigate metabolic biomarker and pathway changes. Meanwhile, the biochemical indexes of Barbus capito were measured to discover the chronic impairment response to salinity-alkalinity exposures. A total of 29 tissue metabolites were determined to deciphering the endogenous metabolic changes of fishes during the different concentration salinity-alkalinity exposures environment, which were mainly involved in the key metabolism including the phenylalanine, tyrosine, and tryptophan biosynthesis, arachidonic acid metabolism, pyruvate metabolism, citrate cycle, and glycerophospholipid metabolism. Finally, we found the amino acid metabolism as key target was associated with the endogenous metabolites and metabolic pathways of Barbus capito to salinity-alkalinity exposures. In conclusion, metabolomics is a potentially powerful tool to reveal the mechanism information of fish in various exposure environments., (© 2020 Wiley-VCH GmbH.)

Background: There are scenarios where pre-mixing and infusing analgesic and anaesthetic agents as a single intravenous (IV) solution is highly desirable; however, it is important to ensure the agents are compatible when mixed. As such, the long-term stability of a remifentanil-propofol mixture, and means of improving this, were assessed across a range of remifentanil concentrations, diluents, and time points., Methods: Remifentanil was reconstituted with ultrapure water, 0.9% saline, 20% saline, or 8.4% sodium bicarbonate solution (the latter two chosen for their pH characteristics, rather than their use in pharmaceutical reconstitution) and then mixed with propofol (1%) or further diluted with water to derive concentrations of 10-50 μg mL - 1 . Remifentanil and propofol concentrations were determined initially and then periodically for up to 24 h using high performance liquid chromatography (HPLC). Mass spectrometry (MS) was used to detect degradation products in solutions containing 30 μg mL - 1 of remifentanil. Statistical analysis was performed using ANOVA and Student's t-test, with a significance value of 0.05., Results: Isolated remifentanil (pH < 4) and propofol (pH 7.35) did not degrade significantly when reconstituted with water or saline solution over 24 h, while remifentanil reconstituted with sodium bicarbonate degraded significantly (P < 0.001, pH 8.65). Mixing with propofol substantially increased the pH of the mixture and resulted in significant remifentanil degradation for all reconstitution solutions used, while propofol remained stable (pH 6.50). The amount of degradation product detected in samples containing isolated remifentanil and a mixture of the drugs was proportional to the remifentanil degradation observed., Conclusions: Remifentanil stability is affected by both the reconstitution solution used and when mixed with propofol, with pH appearing to be a contributing factor to degradation. If the pH of the solution and concentration of remifentanil are correctly controlled, e.g. through the use of a more acidic diluent, an admixture of remifentanil and propofol may be useful clinically.

Objectives: This study is aimed to explore the blending process of Dahuang soda tablets. These are composed of two active pharmaceutical ingredients (APIs, emodin and emodin methyl ether) and four kinds of excipients (sodium bicarbonate, starch, sucrose, and magnesium stearate). Also, the objective is to develop a more robust model to determine the blending end-point., Methods: Qualitative and quantitative methods based on near-infrared (NIR) spectroscopy were established to monitor the homogeneity of the powder during the blending process. A calibration set consisting of samples from 15 batches was used to develop two types of calibration models with the partial least squares regression (PLSR) method to explore the influence of density on the model robustness. The principal component analysis-moving block standard deviation (PCA-MBSD) method was used for the end-point determination of the blending with the process spectra., Results: The model with different densities showed better prediction performance and robustness than the model with fixed powder density. In addition, the blending end-points of APIs and excipients were inconsistent because of the differences in the physical properties and chemical contents among the materials of the design batches. For the complex systems of multi-components, using the PCA-MBSD method to determine the blending end-point of each component is difficult. In these conditions, a quantitative method is a more suitable alternative., Conclusions: Our results demonstrated that the effect of density plays an important role in improving the performance of the model, and a robust modeling method has been developed.

Osteoporosis is a global chronic disease characterized by severe bone loss and high susceptibility to fragile fracture. It is widely accepted that the origin acidified microenvironment created by excessive osteoclasts causes irreversible bone mineral dissolution and organic degradation during osteoclastic resorption. However, current clinically available approaches are mainly developed from the perspective of osteoclast biology rather than the critical acidified niche. Here, we developed a smart "nanosacrificial layer" consisting of sodium bicarbonate (NaHCO 3 )-containing and tetracycline-functionalized nanoliposomes (NaHCO 3 -TNLs) that can target bone surfaces and respond to external secreted acidification from osteoclasts, preventing osteoporosis. In vitro and in vivo results prove that this nanosacrificial layer precisely inhibits the initial acidification of osteoclasts and initiates a chemically regulated biocascade to remodel the bone microenvironment and realize bone protection: extracellular acid-base neutralization first inhibits osteoclast function and also promotes its apoptosis, in which the apoptosis-derived extracellular vesicles containing RANK (receptor activator of nuclear factor-κ B) further consume RANKL (RANK ligand) in serum, achieving comprehensive osteoclast inhibition. Our therapeutic strategy for osteoporosis is based on original and precise acid-base neutralization, aiming to reestablish bone homeostasis by using a smart nanosacrificial layer that is able to induce chemically regulated biocascade effects. This study also provides a novel understanding of osteoporosis therapy in biomedicine and clinical treatments.

The pH of toothpaste is a critical factor for product stability and customer acceptance. However, no reliable and consistent method is currently available to precisely quantify pH in toothpaste as it is. In this study, a new method to directly determine pH value in the full toothpaste contained sodium bicarbonate (NaHCO 3 ) was developed. Briefly, we utilized the 13 C NMR chemical shift of a small molecule that has been formulated in the toothpaste as a sensitive probe to consistently respond to the pH value of the full toothpaste. The ideal pH probe molecule has the following characteristics: (1) its NMR chemical shift is sensitive to pH within a certain range, and (2) the chemical shift only responses to pH value, not to other factors, such as molecular interaction. NaHCO 3 is a common ingredient in many toothpaste products used as a mild abrasive and an effective pH adjustment compound. Its chemical shift is very sensitive to pH; therefore, it was used as a candidate molecule to test this concept. This technique was demonstrated on select toothpaste formula contained arginine and sodium bicarbonate with different abrasive bases. The result shows that the pH value of full toothpaste is significantly higher than the pH of the toothpaste slurry. Arginine is a key active ingredient in these toothpastes, and it does not interfere with the chemical shift of sodium bicarbonate. The traditional method to determine the pH of toothpaste using pH electrode in toothpaste slurry typically has a larger measuring error, ranging from 0.1 to 0.3. This new method greatly reduced the measuring error, providing a consistent way to reliably determine pH in the full toothpaste, and enabling the stability test of toothpaste with smaller variations. This newly developed method can be further extended to other low-water gel or paste products at a different pH range by using different probe molecules., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

It is known that 7-epitaxol has much stronger cytotoxicity than taxol does. However, the content of 7-epitaxol in yew is much less than taxol, which makes it more costly to obtain. We describe here a method to effectively convert taxol to 7-epitaxol. The key condition for reaction needs NaHCO 3 in solvent acetonitrile (ACN). The conversion rate can be over 82%., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Purpose: Novel particle engineering approach was used in this study to generate high dose inhalable effervescent particles with synergistic effects against Pseudomonas aeruginosa biofilms., Methods: Spray dried co-amorphous salt of ciprofloxacin (CFX) and tartaric acid (TA) was prepared and coated with external layer of sodium bicarbonate and silica coated silver nanobeads. Design of experiments (DOE) was used to optimize physicochemical properties of particles for enhanced lung deposition., Results: Generated particles were co-amorphous CFX/TA showing that CFX lost its zwitterionic form and exhibiting distinct properties to CFX/HCl as assessed by FTIR and thermal analysis. Particles exhibited mass mean aerodynamic diameter (MMAD) of 3.3 μm, emitted dose of 78% and fine particle dose of 85%. Particles were further evaluated via antimicrobial assessment of minimum inhibitory concentrations (MIC) and minimum biofilm eradication concentration (MBEC). MIC and MBEC results showed that the hybrid particles were around 3-5 times more effective when compared to CFX signifying that synergistic effect was achieved. Diffusing wave spectroscopy results showed that the silver containing particles had a disruptive effect on rheological properties as opposed to silver free particles., Conclusions: Overall, these results showed the potential to use particle engineering to generate particles that are highly disruptive of bacterial biofilms.

Bioadhesives such as tissue adhesives, hemostatic agents, and tissue sealants have potential advantages over sutures and staples for wound closure, hemostasis, and integration of implantable devices onto wet tissues. However, existing bioadhesives display several limitations including slow adhesion formation, weak bonding, low biocompatibility, poor mechanical match with tissues, and/or lack of triggerable benign detachment. Here, we report a bioadhesive that can form instant tough adhesion on various wet dynamic tissues and can be benignly detached from the adhered tissues on demand with a biocompatible triggering solution. The adhesion of the bioadhesive relies on the removal of interfacial water from the tissue surface, followed by physical and covalent cross-linking with the tissue surface. The triggerable detachment of the bioadhesive results from the cleavage of bioadhesive's cross-links with the tissue surface by the triggering solution. After it is adhered to wet tissues, the bioadhesive becomes a tough hydrogel with mechanical compliance and stretchability comparable with those of soft tissues. We validate in vivo biocompatibility of the bioadhesive and the triggering solution in a rat model and demonstrate potential applications of the bioadhesive with triggerable benign detachment in ex vivo porcine models., Competing Interests: Competing interest statement: X.C., H.Y., and X.Z. are inventors on a patent application (US No. 63/034,644) that covers the instant tough bioadhesive with triggerable benign detachment.

In an examination of three unwrapped mummified children from the Graeco-Roman Period of ancient Egypt there was an unexpected finding of fair hair. In the majority of unwrapped ancient Egyptian mummified bodies the hair was not fair but rather dark brown or black. To determine if exposure to natron during the mummification process was responsible for the fair hair color an experiment was carried out to partially replicate the environment in which bodies were desiccated. Fourteen samples of modern hair from various age groups, sex and ethnicity were subjected to synthetic natron for a period of 40 days to replicate the time taken to mummify a body. Macroscopic and microscopic examinations of samples were employed to ascertain any significant changes in hair color after treatment. Ancient wigs were studied for evidence of post mortem changes to hair color since construction over 2,000 years ago. Results of the study showed no significant lightening of hair color and in several samples the hair significantly darkened as the result of exposure to the natron. There was not any evidence that hair lightened as the result of natural post mortem changes and this was confirmed by the study of the natural hair wigs that had not changed color post mortem. This study concluded that the fair hair observed in the three child mummies was not the result of exposure to natron or post mortem changes but rather it was probably due to ancestry because of the presence of diverse genomes that were introduced into ancient Egypt during the Greco-Roman Period.

Floating gastro-retentive delivery systems can prolong the gastric residence providing sustained drug release. In this study, we report on self-inflating effervescence-based electrospun nanofiber membranes embedding polyethylene oxide/sodium bicarbonate cast films. In this system, sodium bicarbonate results in an effervescence effect by creating carbon dioxide gas upon contacting an acidic gastric fluid, with the resulting gas bubbles being entrapped within the swollen network of nanofibers. Eudragit RL and RS polymers are utilized as a host material to manipulate release kinetics of incorporated drugs. Pramipexole, a common medication for chronic Parkinson's disease (PD), is used as a model drug. Uniform and bead-free nanofibers with diameters of ~300 nm were obtained. Although floating nanofibers initially exhibited high water contact angles (WCA), water droplets were quickly absorbed into the surface and the WCA decreased to ~0° within 60 s. Floating lag time, total floating time, swelling properties and drug release profiles were investigated both in a simulated gastric fluid (pH 1.2 buffer solution) and in a simulated intestinal fluid (pH 6.8 buffer solution) at 37 °C. All floating nanofiber formulations began to float instantly with nearly zero floating lag time and did not sink into the solution even after 24 h. By comparison, the same formulations without sodium bicarbonate cast films could not maintain continuous floating beyond 15 min. The floating nanofiber pouches presented lower initial release of between 20 and 57 %, compared to that of non-floating nanofiber pouches (40-82% within 2 h). Clearly, floating nanofibers reduced the initial burst release and provided sustained drug release. This demonstrates the potential to result in 'once-a-day' oral introduction of drugs that normally must be taken frequently. Effervescence-based floating nanofibers present a novel and promising prototype delivery system for the drug delivery in the upper gastro-intestinal (GI) tract., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

This research aimed to compare the efficiency of five washing solutions (0.9% NaCl, 0.1% NaHCO 3 , DI water, 0.001% KMnO 4, and 0.1% acetic acid) for removing carbaryl residues from cucumber and chili. The vegetables were soaked in 10 mg/L of carbaryl solution for 30 min and then washed for 30 min in one of the five washing solutions and the results compared. Each experiment was performed in triplicate and the amounts of carbaryl residues remaining were determined using high-performance liquid chromatography (HPLC). The results showed that 0.001% KMnO 4 was the most effective at removing carbaryl from both vegetables. Washing with 0.001% KMnO 4 reduced carbaryl residues to 64% and 28%, respectively, of the original concentrations. Washing with DI water was the least effective method of removing carbaryl residues. Hopefully, the results will encourage further research, into reducing carbaryl contamination by washing with chemical solutions, which will enable producers to reduce pesticide residues., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Introduction: This study investigated the effect of a calcium hydroxide (CH) paste (CleaniCal®) containing N-2-methyl pyrrolidone (NMP) as a vehicle on Enterococcus faecalis (E. faecalis) biofilms compared with other products containing saline (Calasept Plus™) or propylene glycol (PG) (Calcipex II®)., Methodology: Standardized bovine root canal specimens were used. The antibacterial effects were measured by colony-forming unit counting. The thickness of bacterial microcolonies and exopolysaccharides was assessed using confocal laser scanning microscopy. Morphological features of the biofilms were observed using field-emission scanning electron microscopy (FE-SEM). Bovine tooth blocks covered with nail polish were immersed into the vehicles and dispelling was observed. The data were analyzed using one-way analysis of variance and Tukey tests (p<0.05)., Results: CleaniCal® showed the highest antibacterial activity, followed by Calcipex II® (p<0.05). Moreover, NMP showed a higher antibacterial effect compared with PG (p<0.05). The thickness of bacteria and EPS in the CleaniCal® group was significantly lower than that of other materials tested (p<0.05). FE-SEM images showed the specimens treated with Calasept Plus™ were covered with biofilms, whereas the specimens treated with other medicaments were not. Notably, the specimen treated with CleaniCal® was cleaner than the one treated with Calcipex II®. Furthermore, the nail polish on the bovine tooth block immersed in NMP was completely dispelled., Conclusions: CleaniCal® performed better than Calasept Plus™ and Calcipex II® in the removal efficacy of E. faecalis biofilms. The results suggest the effect might be due to the potent dissolving effect of NMP on organic substances.

Background: The benefit of intravenous sodium bicarbonate administration in patients with severe metabolic acidosis remains controversial, partly due to lack of double-blind trials. From a practical viewpoint, such blinding requires testing of the stability of sodium bicarbonate in polyolefin bags., Methods: We examined seven samples of 100 mL 8.4% sodium bicarbonate diluted in 150 mL normal saline within a 250 mL polyolefin bag at time 0, 24 and 48 hours after preparation. We measured pH, Pco 2 , and bicarbonate concentration., Results: Over a period of 48 hours, both pH and Pco 2 decreased significantly (hourly rate of change, -0.001 [ P = 0.043) and -0.098 [ P < 0.001] respectively). However, the concentration of bicarbonate did not decrease, with an hourly rate of change of only -0.009 ( P = 0.42)., Conclusion: When 100 mL of 8.4% sodium bicarbonate are diluted in 150 mL of normal saline within a 250 mL polyolefin bag, changes in pH and Pco 2 over a 48-hour period are small and bicarbonate concentration remains stable.

Using Chitosan/PEO as the shell and PCL as the core, chitosan-polyethylene oxide/polycaprolactone nanofibrous mats were prepared successfully by coaxial electrospinning for co-load and sequential co-delivery of two drugs. Herein, lidocaine hydrochloride (Lid), used for pain relief, was added to the shell, and curcumin (Cur), an anti-inflammatory agent, was introduced into the core. Sodium bicarbonate (SB) was also added to the core layer to provide wound microenvironment sensitivity. Under acidic conditions, Lid was released due to the formation of -NH3+ by protonation of -NH2 on the chitosan molecular chains. At the same time, SB reacted with hydrogen ions to generate CO2, and many holes were generated on the surface of the fibers, providing more discharge paths for Cur release. Additionally, both Lid in the shell layer and Cur in the core layer exhibited acidic pH (∼5.4)-responsive release profiles. Moreover, a rapid release of Lid and a sustained release of Cur were observed to provide the immediate effects of analgesia and long-term antibacterial activity in the process of wound healing. Furthermore, after 48 h incubation, the mats showed continuous and excellent antibacterial performance against E. coli and S. aureus. The results of blood coagulation showed that the mats could achieve rapid hemostasis in the early stage of wound formation. Hemolytic and cytotoxicity evaluation also revealed that the mats had excellent hemocompatibility and cytocompatibility. Therefore, this study has made invaluable contributions to the design of a dual-drug-loaded dressing with microenvironment-responsive and sequential release properties towards wound care.

Background: Increased composite roughness enhances bacterial adhesion and discoloration, thus increasing the risk of gingival inflammation and secondary caries. Concerns about detrimental effects of sodium bicarbonate on surface roughness influenced the development of less abrasive powders: a glycine-based powder and an erythritol-based powder, additionally - sodium bicarbonate-based powder of reduced grain size. However, there is limited evidence on effects of these materials on the surface of dental fillings. The aim of the present study was to compare the effects of three air-polishing powders (of a reduced abrasiveness) on surface roughness of microhybrid restorative composite material., Material and Methods: Microhybrid light-cure resin composite samples were placed on 64 plaster cubes and light-cured through polyester strips. Surface roughness was measured using laser confocal microscope (magnification 2160x). The specimens were randomly divided into three groups (n = 20, 20 and 24) and air-polished with: sodium bicarbonate (40 μm), glycine (25 μm) and erythritol (14 μm), respectively. Then surface roughness was remeasured, keeping the same field of observation. Specialized 3D analysis software was used for data processing. Parameters according to ISO 25178: Sa, Sq, Sku, Sp, Sv, Sz, Ssk were used to describe surface roughness., Results: Sa, Sq, Sp, Sv, Sz increased significantly following air polishing. Ssk was significantly higher, whereas Sku was significantly lower in sodium bicarbonate and erythritol groups than before air polishing. Comparison between the three powders revealed that Sa was significantly higher in sodium bicarbonate group than in glycine group. Sku was significantly higher in glycine and erythritol groups than in sodium bicarbonate group., Conclusions: Sodium bicarbonate has a stronger detrimental effect on composite surface than glycine or erythritol. No advantage of erythritol comparing to glycine could be found.

Volatile organic compounds (VOCs) in wood furniture are an important factor that affects indoor air quality. In this study, radiata pine ( Pinus radiata D. Don) was treated with sodium bicarbonate and ozone aqueous solution to reduce the VOC contents without sacrificing mechanical properties. The VOCs of radiata pine were identified by gas chromatography-mass spectrometry (GC-MS), and the functional group changes of wood samples were characterized by Fourier-transform infrared spectroscopy (FTIR). The results showed that the main VOCs of radiata pine include alkenes, aldehydes, and esters. The sodium bicarbonate and ozone treatments almost eliminated the VOC contents of radiata pine. The two treatments mentioned above had little effect on compressive strength and surface color of radiata pine., Competing Interests: This was not an industry-supported study. The authors declare no conflict of interest.

The objective of this study was to investigate the basic properties of eco-friendly adhesives produced from Tamarindus indica seed kernel powder (TKP) and to use them for fabricating particleboard. Four different types of adhesive were manufactured from TKP having certain percentage of polyvinyl alcohol (PVA), citric acid (CA), glucose, acetic acid, sodium bicarbonate, urea and potassium permanganate. Solid content, Gelling time, FTIR, Thermogravimetric analysis (TGA), viscosity and single lap joint test for shear strength of the prepared adhesives were tested. Both the physical and mechanical properties of the experimental particleboards were evaluated followed by ASTM standards. Adhesive type A resulted in the quickest gel time (1.42 min) and the highest bonding strength (5.18 MPa). Adhesive type B having the density of 0.65 g/cm 3 showed the highest modulus of elasticity (2108 N/mm 2 ) and modulus of rupture (10 N/mm 2 ). Although dimensional stability of the experimental panels was poor but their overall mechanical strengths properties met the values listed in the standards., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The main objective of this study is to explore the influence of ion composition on the trans-membrane potential across the ion exchange membrane (IEM), and thus offers a reference for the deep insight of "reverse electrodialysis heat engine" running in the composite systems. In comparison to the natural system (river water | seawater), the performance of the reverse electrodialysis (RED) stack was examined using NaHCO 3 , Na 2 CO 3 , and NH 4 Cl as the supporting electrolyte in the corresponding compartment. The effect of flow rates and the concentration ratio in the high salt concentration compartment (HCC)/low salt concentration compartment (LCC) on energy generation was investigated in terms of the open-circuit voltage (OCV) and power density per membrane area. It was found that the new system (0.49 M NaCl + 0.01 M NaHCO 3 |0.01 M NaHCO 3 ) output a relatively stable power density (0.174 W·m -2 ), with the open-circuit voltage 2.95 V under the low flow rate of 0.22 cm/s. Meanwhile, the simulated natural system (0.5 M NaCl|0.01 M NaCl) output the power density 0.168 W·m -2 , with the open-circuit voltage 2.86 V under the low flow rate of 0.22 cm/s. The findings in this work further confirm the excellent potential of RED for the recovery of salinity gradient energy (SGP) that is reserved in artificially-induced systems (wastewaters).

A new microfluidic chemiluminescence (MF-CL) method for rapidly assaying the total antioxidant capacity (TAC) of apple and pomegranate juices and honey samples was developed. The method exploited the NaHCO 3 -H 2 O 2 -Co 2+ CL reaction. It was found that gallic acid (GA), catechin, caffeic acid, ferulic acid and rutin, as selected phenolic antioxidants, could suppress the CL reaction. The linear range and limit of detection of the method for the antioxidants were as follows: 0.5-3 mg L -1 and 0.27 mg L -1 for GA, 0.2-5.0 mg L -1 and 0.17 mg L -1 for catechin, 0.03-2.0 mg L -1 and 0.03 mg L -1 for caffeic acid, 0.3-2.0 mg L -1 and 0.23 mg L -1 for ferulic acid and 0.3-4.0 mg L -1 and 0.15 mg L -1 for rutin. GA was used as the standard, and the TAC of the fruit juices and honey samples as presented as GA equivalents (GAE). MF-CL was compared with DPPH and Folin-Ciocalteau (FC) methods., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Objective: The aim of the study was to determine the stability of two non-commercially produced solutions: 1.68% sodium bicarbonate in 5% glucose (BIC solution) and 1.6% calcium chloride in 0.9% sodium chloride (CAL solution), which can be used to treat tumor lysis syndrome. One of the ways to treat the tumor lysis syndrome is to irrigate patients, alkalinize the urine through the supply of BIC solution or continuous hemodialysis with regional citrate anticoagulation, using a CAL solution., Method: The study took place in two independent hospital pharmacies. Fifty samples of each solution were prepared under aseptic conditions, then the concentration of sodium and calcium ions was determined and microbiological purity tests were carried out. The tests were performed on the day of sample preparation and after seven days of storage at 4 ± 1℃., Results: The obtained results showed that applied preparation method was precise and accuracy. The average concentration of sodium ions in BIC solutions ranged from 187.7 to 185.26 mmol/L on 1st and 7th day, respectively. The average concentration of calcium ions in CAL solution ranged from 68.92 to 68.80 mmol/L on 1st and 7th day, respectively. None of the samples were microbiologically contaminated., Conclusion: Studied solutions for infusion were characterized by good chemical and microbiological stability when prepared in a clean room and stored at 4 ± 1℃.

Cassava leaves are a valuable source of protein but the cyanogenic potential limits their use as food and feed. Four different treatments were investigated to detoxify cassava leaves. Thermal (55 °C for 6 hr), sodium bicarbonate (0.4% NaHCO 3 , 55 °C for 6 hr), enzymatic (0.32% Multifect® GC Extra, 4 hr), and ultrasonic treatments (500 W, 35 kHz, 55 °C, 0.25 hr) reduced the total cyanide (µg HCN equivalents per g fresh leaf or ppm) content by 90%, 93%, 82%, and 84% while the cyanide content reduction in the respective controls was 85%, 90%, 79%, and 84%, respectively. The sodium bicarbonate treatment was found to be the most effective treatment. Therefore, it was further optimized by varying time and temperature. A significant effect on the cyanide content was observed by changing the incubation time while no significant effect of temperature was noticed. Nevertheless, extended incubation time during sodium bicarbonate treatment reduced ascorbic acid content by 7% and 39% when leaves were incubated with sodium bicarbonate for 0.5 hr and 48 hr, respectively. PRACTICAL APPLICATION: Cyanogenic glucosides are the major toxic compound in cassava leaves, which limits their use as food and feed. The methods proposed in this study can be used to detoxify cassava leaves, which are generally considered as an inferior by-product. Hence, detoxified cassava leaves may contribute to fulfil world protein demand in an eco-sustainable way., (© 2019 Institute of Food Technologists®.)

The effects of alkali (NaHCO 3 or Na 2 CO 3 ) on the quality and protein polymerization of buckwheat Chinese steamed bread (CSB) were investigated. The alkali addition increased the specific volume of CSB, for NaHCO 3 from 1.84 ml/g (control) to 2.66 ml/g. Image analysis showed that alkali increased the pore area fractions. The addition of Na 2 CO 3 exhibited a greater pore count and lower pore average size. The texture properties were improved with the increase of crumb hardness and resilience. The extractability of protein in sodium dodecyl sulfate containing medium (SDSEP) decreased. Furthermore, SDS-PAGE showed an obvious decrease in the intensity of protein bands with lower molecular weight, while intensity of higher molecular protein bands increased. This demonstrated that alkali addition promoted protein aggregation in buckwheat CSB. In addition, the content of degydroalanine and lanthionine increased and free SH decreased, which indicated alkali addition prompted protein to form dehydroalanine-derived and disulfide cross-linkings., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Formulations for the controlled release of substances in the human terminal ileum and colon are essential to target the gut microbiome and its interactions with the intestinal mucosa. In contrast to pharmaceutical enteric coatings, reliable food-grade alternatives are still scarce. Shellac coatings have been used for various active ingredients, but their stability is affected by the physicochemical properties of the encapsulated substances. It is well known, that shellac release can be modulated by an acidic subcoating. Here, we hypothesized that a triple shellac coating with an adjusted intermediate coating (acidic or alkaline) can be effectively used to counteract the differences in pH value of various encapsulated substances, allowing a precise targeting of the desired release pH value. First, the system was tested with riboflavin 5'-monophosphate sodium salt dihydrate (RMSD) as a characteristic model substance. Secondly, it was transferred to nicotinic acid (NA) and nicotinamide (NAM) as bioactive compounds with different physio-chemical properties: NAM, an alkaline crystalline and highly water-soluble substance, led to a premature release from conventional shellac microcapsules, whereas RMSD and NA with their medium solubility and neutral to acidic pH properties delayed the shellac dissolution. A precise modulation of the release profile of each substance was possible by the addition of different intermediate subcoatings: an acidic layer with citric acid counteracted the premature release of the alkaline and highly soluble NAM. In contrast, an alkaline sodium bicarbonate intermediate subcoating enhanced shellac swelling and delayed the release of NA and RMSD. In conclusion, the novel triple-layer shellac coating provides a much higher adaptability and reliability for nutritional formulations aiming at a targeted release in the ileocolonic region., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Amine-basedcarbon-capture technologies have been shown to be energetically expensive and to cause significant environmental and epidemiological impacts due to their volatility. Bicarbonate formation from carbon dioxide's reaction with water has been suggested as an effective alternative for capturing CO 2 ; however, the thermodynamics of this reaction are not well understood. This study experimentally determined the equilibrium constant of sodium bicarbonate (NaHCO 3 ) decomposition to sodium, water, and carbon dioxide; the study also compared the equilibrium constant to theoretical calculations. Using a combination of experimentation and thermodynamic relationships, the unitless equilibrium constants of the forward and reverse reactions were calculated accurately (error <±9% and <±4%, respectively). Equilibrium data were calculated using enthalpy and entropy values of each component of NaHCO 3 decomposition at temperatures ranging from 25 to 155°C respectively. These results offer more data essential to optimizing NaHCO 3 use in environmentally friendly next-generation CO 2 -capture technologies., (Copyright © 2018. Published by Elsevier B.V.)

Objective: The main objective of this research is to formulate, optimize, and evaluate raft-forming chewable tablets of Nizatidine. Various raft-forming agents were used in preliminary screening. Sodium alginate showed maximum raft strength, so tablets were prepared using sodium alginate as the raft forming agent, along with calcium carbonate (CaCO 3 ) as antacid and raft strengthening agent, and sodium bicarbonate (NaHCO 3 ) as a gas generating agent., Research Design and Methods: Raft forming chewable tablets containing Nizatidine were prepared by direct compression and wet granulation methods, and evaluated for drug content, acid neutralization capacity, raft strength, and in-vitro drug release in 0.1 N HCl. Box-Behnken design was used for optimization., Results: Two optimized formulations were predicted from the design space. The first optimized recommended concentrations of the independent variables were predicted to be X 1  = 275.92 mg, X 2  = 28.60 mg, and X 3  = 202.14 mg for direct compression technique and the second optimized recommended concentrations were predicted to be X 1  = 253.62 mg, X 2  = 24.60 mg, and X 3  = 201.77 mg for wet granulation technique. Optimized formulations were stable at accelerated environmental testing for six months at 35 °C and 45 °C with 75% relative humidity. X-Ray showed that the raft floated immediately after ingestion and remained intact for ∼3 h., Conclusion: Raft was successfully formed and optimized. Upon chewing tablets, a raft is formed on stomach content. That results in rapid relief of acid burning symptoms and delivering the drug into systemic circulation with enhanced bioavailability.

Background: Sunflower seed derived butter can be a source of protein and phenolic antioxidants in refrigerated dough. Chlorogenic quinone-amino acid induced greening can however occur at alkaline pH, which could result in less bioavailable conjugated phenol-amino acids. Acidulants were tested as potential anti-greening ingredients in refrigerated chemically leavened cookie dough. Effect of refrigerated storage time, leavening agents and acidulants on tryptophan fluorescence (λex = 280 nm, λem = 300-500 nm), color (hunter L*, a*, b* color scale), reducing capacity [1,1'-diphenyl-2-picryl-hydrazyl (DPPH) and Folin-Ciocalteu reducing capacity (FCRC)], and hydroxycinnamic acids were measured., Results: The pH range of acidified doughs was 4.83-6.98 compared to 7.65-9.18 in non-acidified leavened doughs after 24 days. Greening was higher in baking soda dough control (a* = -0.54) than baking powder dough control (a* = 2.98) after 24 days, attributed to higher pH (9.18) of the former compared to pH 7.14 in the later. Tryptophan fluorescence intensity in baking soda dough decreased in the order: control > glucono-delta lactone ≈ citric acid after 24 days. The DPPH and FCRC of acidified doughs were greater than corresponding control doughs., Conclusion: The use of acidulants would prevent greening in sunflower dough without lowering its phenolic concentration, making use of sunflower butter in refrigerated dough for baked goods feasible. © 2018 Society of Chemical Industry., (© 2018 Society of Chemical Industry.)

Aerobic oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) as a bioplastics monomer is efficiently promoted by a simple system based on a nonprecious-metal catalyst of MnO 2 and NaHCO 3 . Kinetic studies indicate that the oxidation of 5-formyl-2-furancarboxylic acid (FFCA) to FDCA is the slowest step for the aerobic oxidation of HMF to FDCA over activated MnO 2 . We demonstrate through combined computational and experimental studies that HMF oxidation to FDCA is largely dependent on the MnO 2 crystal structure. Density functional theory (DFT) calculations reveal that vacancy formation energies at the planar oxygen sites in α- and γ-MnO 2 are higher than those at the bent oxygen sites. β- and λ-MnO 2 consist of only planar and bent oxygen sites, respectively, with lower vacancy formation energies. Consequently, β- and λ-MnO 2 are likely to be good candidates as oxidation catalysts. On the other hand, experimental studies reveal that the reaction rates per surface area for the slowest step (FFCA oxidation to FDCA) decrease in the order of β-MnO 2 > λ-MnO 2 > γ-MnO 2 ≈ α-MnO 2 > δ-MnO 2 > ε-MnO 2 ; the catalytic activity of β-MnO 2 exceeds that of the previously reported activated MnO 2 by three times. The order is in good agreement not only with the DFT calculation results, but also with the reduction rates per surface area determined by the H 2 -temperature-programmed reduction measurements for MnO 2 catalysts. The successful synthesis of high-surface-area β-MnO 2 significantly improves the catalytic activity for the aerobic oxidation of HMF to FDCA.