Search

In recent years, natural polysaccharides (PSs) have attracted increasing interest because of their remarkable biological properties and potential in various areas, such as medicine, and food. This study aimed to present a detailed review of the evidence on the therapeutic potential of PSs for the treatment of gastrointestinal diseases. The main evidence was correlated with their chemical composition, mechanism of action and therapeutic effect. The main results showed that the action can be attributed to their ability to suppress excessive inflammatory responses, regulating the expression of cytokines and interleukins, reducing intestinal inflammation and promoting wound healing. Furthermore, we discussed how PSs help in the repair of the intestinal mucosa and related these effects with the composition of monosaccharides. A detailed analysis was performed on the ability of PSs to modulate the intestinal microbiota, promoting the growth of beneficial bacteria and suppressing inflammatory bacteria, in addition to its probiotic action with production of short-chain fatty acids. All this evidence was also taken into a broader context, in which the main challenges in processing PSs were considered and strategies to circumvent them were pointed out. Therefore, this review sought to demonstrate the great potential and viability of PSs as innovative and effective therapeutic agents., Competing Interests: Declaration of competing interest The authors have no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The review highlights significant advances in delivery systems, with an emphasis on the use of cashew gum (CG), a natural polysaccharide extracted from Anacardium occidentale L., recognized for its remarkable biodegradability and versatility. CG has a wide range of applications spanning sectors such as food, pharmaceuticals, agriculture, and biotechnology. This study examines research focused on the extraction, purification, and chemical modifications of CG, as well as its combination with other biopolymers to enhance physicochemical and mechanical properties. These strategies aim to optimize the gum's characteristics, allowing for the creation of innovative materials with improved performance, expanding its potential applications. This review aims to provide a comprehensive overview of recent research trends, focusing on the utilization of CG as a polymeric component in the development of biomaterials with diverse applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Introduction: Human Immunodeficiency Virus (HIV) infection is still a major global problem, whose drug treatment consists of prophylactic prevention and antiretroviral combination therapy for better pharmacological efficacy and control of the circulating virus. However, there are still pharmacological problems that need to be overcome, such as low aqueous solubility of drugs, toxicity, and low patient adherence. Drug delivery technologies can be used to overcome these barriers., Objective: This review summarized the latest drug delivery systems for HIV treatment. Initially, an overview of the current therapy was presented, along with the problems it presents. Then, the latest drug delivery systems used to overcome the challenges imposed in conventional HIV therapy were discussed., Conclusion: This review examines innovative approaches for HIV treatment, where various drug delivery systems have shown significant advantages, such as high drug encapsulation, improved solubility, and enhanced bioavailability both in vitro and in vivo. Strategies like cyclodextrins, solid dispersions, microneedles, and nanoparticles are explored to address challenges in drug solubility, bioavailability, and administration routes. Despite progress, obstacles like limited clinical trials and industrial scalability hinder the widespread adoption of these formulations, emphasizing the need for further research and collaboration to optimize and ensure accessibility of innovative HIV therapies, mainly in regions where access to HIV treatment is scarce and remains a challenge., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

This study aims to investigate key variables affecting the dissolution of amorphous pharmaceuticals. We examined sample treatment methods (centrifugation vs syringe filtration), time delays between sample collection and processing (immediate, 2, or 24 h), and different sample preparations (bare powder, capsules, or tablets). These factors were evaluated through both sink and nonsink dissolution experiments, using controlled supersaturation conditions (sink index ≈ 0.1) with amorphous solid dispersions (ASDs) containing low-substituted hydroxypropyl cellulose (L-HPC) and either indomethacin or posaconazole as model drugs. Our results highlighted the significant impact of syringe filtration on nonsink dissolutions, particularly the notable reduction in dissolved drug concentration, possibly due to filtration-induced precipitation. Moreover, introducing a delay of 2 or 24 h between sample collection and quantitation under nonsink conditions led to substantial concentration changes. This effect was not as pronounced when samples underwent centrifugation, and only the analysis was delayed for 2 h. The findings also emphasize the importance of accounting for delays introduced by pharmaceutical formulations, particularly in assessing the kinetic-solubility profiles of ASDs. This research offers valuable insights into the field of ASDs, enhancing our understanding of how these variables can influence dissolution results.

Insulin is one of the most important drugs in the clinical treatment of diabetes. There is growing interest in oral insulin administration as it mimics the physiological pathway and potentially reduces side effects associated with subcutaneous injection. In this study, a nanoparticulate system was developed using acetylated cashew gum (ACG) and chitosan by the polyelectrolyte complexation method, for oral administration of insulin. The nanoparticles were characterized by size, zeta potential and encapsulation efficiency (EE%). And they had a particle size of 460 ± 11.0 nm, PDI of 0.2 ± 0.021, zeta potential of 30.6 ± 0.48 mV, and an EE% of 52.5 %. Cytotoxicity assays were performed for HT-29 cell lines. It was observed that ACG and nanoparticles did not have a significant effect on cell viability, verifying their biocompatibility. Hypoglycemic effects of the formulation were analyzed in vivo, noting that the nanoparticles reduced blood glucose by 51.0 % of baseline levels after 12 h, not inducing signs of toxicity or death. Biochemical and hematological profiles were not clinically modified. Histological study indicated no signs of toxicity. Results showed that the nanostructured system presented itself as a potential vehicle for oral insulin release., Competing Interests: Declaration of competing interest The authors report no declarations of interest., (Copyright © 2023. Published by Elsevier B.V.)

Nanotechnology is a crucial technology in recent years has resulted in new and creative applications of nanomedicine. Polymeric nanoparticles have increasing demands in pharmaceutical applications and require high reproducibility, homogeneity, and control over their properties. Work explores the use of cashew phthalate gum (PCG) as a particle-forming polymer. PCG exhibited a pH-sensitive behavior due to the of acid groups on its chains, and control drug release. We report the development of nanoparticles carrying benznidazole. Formulations were characterized by DLS, encapsulation efficiency, drug loading, FTIR, pH-responsive behavior, release, and in vitro kinetics. Interaction between polymer and drug was an evaluated by molecular dynamics. Morphology was observed by SEM, and in vitro cytotoxicity by MTT assay. Trypanocidal effect for epimastigote and trypomastigote forms was also evaluated. NPs responded to the slightly basic pH, triggering the release of BNZ. In acidic medium, they presented small size, spherical shape, and good stability. It was indicated NP with enhanced biological activity, reduced cytotoxicity, high anti T. cruzi performance, and pH-sensitive release. This work investigated properties related to the development and enhancement of nanoparticles. PCG has specific physicochemical properties that make it a promising alternative to drug delivery, however, there are still challenges to be overcome., Competing Interests: Declaration of competing interest The authors have no conflict of interest., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The aim of the present work was to modify the exuded gum of Sterculia striata tree by an amination reaction. The viscosity and zero potential of the chicha gum varied as a function of pH. The modification was confirmed by X-ray diffraction (XRD), infrared spectroscopy (FTIR), size exclusion chromatography (SEC), zeta potential, thermogravimetric analysis (TG), and differential scanning calorimetry (DSC). Furthermore, the chemical modification changed the molar mass and surface charge of the chicha gum. In addition, the gums were used in tests for ex vivo mucoadhesion strength, antibacterial activity against the standard strain of Staphylococcus aureus (ATCC 25923), inhibitory activity of α-glucosidase, antioxidant capacity, and viability of Caco-2 cells. Through these tests, it was found that amination caused an increase in the mucoadhesive and inhibitory activity of chicha gum against the bacterium Staphylococcus aureus. In addition, the gums (pure and modified) showed antioxidant capacity and an inhibitory effect against the α-glucosidase enzyme and did not show cytotoxic potential., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Introduction: Leprosy is a neglected, infectious, granulomatous and chronic disease caused by the pathological agent Mycobacterium leprae . The course of the disease is more aggressive in patients under 15 years of age, but the current treatment offered worldwide consists of solid forms, by the combination of antibiotics such as rifampicin, clofazimine and dapsone. This represents results in lack of adherence in pediatric patients and drug therapy failure, although numerous formulations and technologies have already been developed., Area Covered: This study aims to analyze the technological evolution of the pharmaceutical treatment of leprosy, aimed at children. A review of patents around the world was conducted to look for technical and clinical aspects of formulations and devices., Expert Opinion: Innovative formulations for pediatric patients were classified according to the routes of administration as oral, inhalable, injectable and transdermal. The formulations were organized as alternatives for pediatric therapy, taking into account the physicochemical aspects of drugs and the physiological aspects of pediatric patients. Among the difficulties for the patented formulations to reach the market, of special note is the low stability of the physicochemical characteristics of the drugs. Optimization of formulations would favor the pediatric treatment of leprosy, aiming at therapeutic success.

Background: Tuberculosis is a chronic respiratory disease caused by Mycobacterium tuberculosis. The common treatment regimens of tuberculosis are lengthy with adverse side effects, low patient compliance, and antimicrobial resistance. Drug delivery systems (DDSs) can overcome these limitations., Objective: This review aims to summarize the latest DDSs for the treatment of tuberculosis. In the first section, the main pharmacokinetic and pharmacodynamic challenges posed by the innate properties of the drugs are put forth. The second section elaborates on the use of DDS to overcome the disadvantages of the current treatment of tuberculosis., Conclusion: We reviewed research articles published in the last 10 years. DDSs can improve the physicochemical properties of anti-tuberculosis drugs, improving solubility, stability, and bioavailability, with better control of drug release and can target alveolar macrophages. However, more pre-clinical studies and robust bio-relevant analyses are needed for DDSs to become a feasible option to treat patients and attract investors., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Introduction: Many drugs used to combat schistosomiasis, Chagas disease, and leishmaniasis (SCL) have clinical limitations such as: high toxicity to the liver, kidneys and spleen; reproductive, gastrointestinal, and heart disorders; teratogenicity. In this sense, drug delivery systems (DDSs) have been described in the literature as a viable option for overcoming the limitations of these drugs. An analysis of the level of development (TRL) of patents can help in determine the steps that must be taken for promising technologies to reach the market., Areas Covered: This study aimed to analyze the stage of development of DDSs for the treatment of SCL described in patents. In addition, we try to understand the main reasons why many DDSs do not reach the market. In this study, we examined DDSs for drugs indicated by WHO and treatment of SCL, by performing a search for patents., Expert Opinion: In this present work we provide arguments that support the hypothesis that there is a lack of integration between academia and industry to finance and continue research, especially the development of clinical studies. We cite the translational research consortia as the potential alternative for developing DDSs to combat NTDs.

Enoxaparin is an effective biological molecule for prevention and treatment of coagulation disorders. However, it is poorly absorbed in the gastrointestinal tract. In this study, we developed an Eudragit® L100 coated chitosan core shell nanoparticles for enoxaparin oral delivery (Eud/CS/Enox NPs) through a completely eco-friendly method without employing any high-energy homogenizer technique and any organic solvents. Spherical nanocarriers were successfully prepared with particle size lower than 300 nm, polydispersity index about 0.12 and zeta potential higher than +25 mV, entrapment efficiency greater than 95% and the in vitro release behavior confirms the good colloidal stability and the successful Eudragit® L100 coating process demonstrated by negligible cumulative enoxaparin release (<10%) when the particles are submitted to simulated gastric fluid conditions. Finally, we demonstrated that the core-shell structure of the particle influenced the drug release mechanism of the formulations, indicating the presence of the Eudragit® L100 on the surface of the particles. These results suggested that enteric-coating approach and drug delivery nanotechnology can be successfully explored as potential tools for oral delivery of enoxaparin., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Trees of the genus Sterculia produce polysaccharide-rich exudates, such as karaya gum (Sterculia urens), chicha gum (Sterculia striata), and Sterculia foetida gum. These anionic biomaterials are biodegradable, with high viscosity, low toxicity, and gelling properties in aqueous media. According to these properties, they show promising applications as a polymer matrix for use in drug delivery systems. For this application, both the chemically modified and the unmodified polysaccharide are used. This review focuses on analyzing the state of the art of recent studies on the use of Sterculia gums in a variety of pharmaceutical forms, such as tablets, hydrogels, micro/nanoparticles, and mucoadhesive films. Sterculia gums-based delivery systems have potential to be explored for new drug delivery systems., (Copyright © 2021. Published by Elsevier B.V.)

We developed a new hydrophobic polymer based on angico gum (AG), and we produced new nanoparticles to expand the applications of natural polysaccharides in nanomedicine. Phthalate angico gum (PAG) was characterized by 1 H NMR, FTIR, elementary analysis, solubility, XRD, and TG. PAG was a hydrophobic and semi-crystalline material, a relevant characteristic for drug delivery system applications. As a proof of concept, nevirapine (NVP) was selected for nanoparticles development. Plackett-Burman's experimental design was used to understand the influence of several factors in nanoparticles production. PAG proved to be a versatile material for producing nanoparticles with different characteristics. Optimized nanoparticles were produced using desirability parameters. NVP-loaded PAG nanoparticles formulation showed 202.1 nm of particle size, 0.23 of PDI, -17.1 of zeta potential, 69.8 of encapsulation efficiency, and promoted modified drug release for 8 h. Here we show that PAG presents as a promising biopolymer for drug delivery systems., (Copyright © 2021. Published by Elsevier B.V.)

The objectives of this study were to determine the effectiveness of a mucoadhesive tablet of pilocarpine, 5 mg, for the treatment of xerostomia and verify its pharmacokinetic profile. The randomized, double-blind, crossover clinical trial involved 25 older adults (60 to 80 years) with xerostomia and hyposalivation who were randomly divided into groups A and B. Once daily, for 7 days, group A used a mucoadhesive tablet containing pilocarpine, while group B used a mucoadhesive tablet without the active ingredient (first intervention). After 7 days of washout (no treatment), use of the medications resumed for 7 days, with a crossover between groups (second intervention). Xerostomia was evaluated through a shortened version of the Summated Xerostomia Inventory-Dutch Version, and the unstimulated salivary flow (USF) and stimulated salivary flow (SSF) of the patients were measured. The patients were evaluated at baseline and 7, 14, and 21 days. Then, the pharmacokinetic profiles of mucoadhesive and conventional oral pilocarpine tablets were compared using saliva obtained from 8 patients. Both of the interventions resulted in a significant reduction in Summated Xerostomia Inventory scores and a significant increase in the mean USF (P < 0.05). A statistically significant increase in the mean SSF only occurred when pilocarpine was administered (P < 0.05). No significant adverse effects were found. The mucoadhesive tablet resulted in much higher salivary concentrations of pilocarpine than did the conventional oral tablet. Both formulations of the mucoadhesive tablet, with or without pilocarpine, relieved patients' dry mouth symptoms. Trial registration: Registro Brasileiro de Ensaios Clinicos (ReBEC) No. RBR-9qdnws.

Objective: To perform the solid-state characterization and the in vitro - in vivo correlation (IVIVC) of three batches of efavirenz (EFV) active pharmaceutical ingredients., Significance: EFV is an effective anti-HIV drug. Due to the poor aqueous solubility, the rate and extent of EFV absorption deeply depend on its dissolution characteristics., Methods: Thermal analyses, x-ray diffraction, and particle size distribution were performed. The saturation solubility and dissolution profiles were assessed in 0.5% (w/v) sodium lauryl sulfate (SLS), fasted-state simulated intestinal fluid (FaSSIF), and fed-state simulated intestinal fluid (FeSSIF) using a flow-through cell. Each batch was orally administered to Wistar rats and the pharmacokinetic parameters were correlated with those obtained from in vitro dissolution., Results: All batches of EFV consisted polymorph I. EFV-A presented the lowest particle size distribution [ d ( v ,0.5) = 197.8 µm; d ( v ,0.9) = 444.6 µm] followed by EFV-B [ d ( v ,0.5) = 223.9 µm; d ( v ,0.9) = 481.1 µm], and EFV-C [ d ( v ,0.5) = 240.8 µm; d ( v ,0.9) = 497.3 µm]. The saturated solubility in FaSSIF was 36% and 40% of that in FeSSIF and SLS, respectively. EFV-A presented the fastest rate and largest extension of dissolution than EFV-B and C (79.15%, 69.93% and 54.22%, respectively, as well as the highest maximum plasma concentration. Levels B, C, and multiple-C of IVIVC models were achieved., Conclusion: The FaSSIF medium discriminated the dissolution profiles of EFV APIs. Small differences in particle size distribution had a significant impact on the biopharmaceutical parameters of EFV, suggesting that strict control of such parameter is an important aspect during API development and drug formulation.

Chemical modification of polysaccharides is an important approach for their transformation into customized matrices that suit different applications. Microwave irradiation (MW) has been used to catalyze chemical reactions. This study developed a method of MW-initiated synthesis for the production of phthalated cashew gum (Phat-CG). The structural characteristics and physicochemical properties of the modified biopolymers were investigated by FTIR, GPC, 1 H NMR, relaxometry, elemental analysis, thermal analysis, XRD, degree of substitution, and solubility. Phat-CG was used as a matrix for drug delivery systems using benznidazole (BNZ) as a model drug. BNZ is used in the pharmacotherapy of Chagas disease. The nanoparticles were characterized by size, PDI, zeta potential, AFM, and in vitro release. The nanoparticles had a size of 288.8 nm, PDI of 0.27, and zeta potential of -31.8 mV. The results showed that Phat-CG has interesting and promising properties as a new alternative for improving the treatment of Chagas disease., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Leprosy disease remains an important public health issue as it is still endemic in several countries. Mycobacterium leprae , the causative agent of leprosy, presents tropism for cells of the reticuloendothelial and peripheral nervous system. Current multidrug therapy consists of clofazimine, dapsone and rifampicin. Despite significant improvements in leprosy treatment, in most programs, successful completion of the therapy is still sub-optimal. Drug resistance has emerged in some countries. This review discusses the status of leprosy disease worldwide, providing information regarding infectious agents, clinical manifestations, diagnosis, actual treatment and future perspectives and strategies on targets for an efficient targeted delivery therapy.

Natural polysaccharides have been investigated as vehicles for oral insulin administration. Because of their non-toxic, renewable, low cost and readily available properties, gums find multiple applications in the pharmaceutical industry. This work aimed to develop a Sterculia striata gum-based formulation associated with additional biopolymers (dextran sulfate, chitosan, and albumin), a crosslinking agent (calcium chloride) and stabilizing agents (polyethylene glycol and poloxamer 188), to increase the oral bioavailability of proteins. Insulin was used as a model drug and the methods used to prepare the formulation were based on ionotropic pregelation followed by electrolytic complexation of oppositely charged biopolymers under controlled pH conditions. The developed formulation was characterized to validate its efficacy, by the determination of its average particle size (622 nm), the insulin encapsulation efficiency (70%), stability in storage for 30 days, and the in vitro mucoadhesion strength (92.46 mN). Additionally, the developed formulation preserved about 64% of initial insulin dose in a simulated gastric medium. This study proposed, for the first time, a Sterculia striata gum-based insulin delivery system with potential for the oral administration of protein drugs, being considered a valid alternative for efficient delivery of those drugs., (Copyright © 2020 Elsevier B.V. All rights reserved.)

In this work, synthesis of sodium dodecyl sulfate (SDS) organomodified LDH Zn 2 Al carrying glibenclamide (GLIB) was performed in one step and in one-pot to obtain nanoparticles (NP). XRD data showed GLIB adsolubilization (d = 14.03 Å) and NP coating with Eudragit L100®. In addition, thermal and XRD data showed exfoliated/intercalated nanocomposite for NP S5 (LDH associated with SDS and Eudragit L100®). LDH organophilization and GLIB intercalation reduced surface area (SBET 23.58 m 2 /g) and NP size (469 nm). In addition, the change in zeta potential (-35.5 ζ) relative to pristine LDH (SBET 41.34 m 2 /g, 688.8 nm and +14 ζ) indicated that LDH functionalization seems an appropriate approach to produce NP with greater colloidal stability and enhanced functionality. The zinc release data from the LDH matrix (2.96 % ±0.002 ppm) showed the effectiveness of the coating in acid medium (pH 1.2) and the release data from GLIB showed the kinetics of release of zero order with release in simulated intestinal medium (pH 7.4) of 88 % and 73 % (24 h) for uncoated and coated NP, respectively. All NP were considered biocompatible in the WST-1 assay on BALB 3T3 fibroblast strains making these NP promising therapeutically., Competing Interests: Declaration of Competing Interest None., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Thalidomide (TLD) is used to treat erythema nodosum leprosum (ENL), multiple myeloma, aphthous ulceration and wasting syndrome in HIV patients. The API can be found in two crystalline habits known as α-TLD and β-TLD. The saturation solubility (C s ) and the dissolution profiles under non-sink and sink conditions of both polymorphs were assessed. In addition, mini-capsules containing α-TLD or β-TLD without excipients were orally given (10 mg/kg) to Wistar rats. An intravenous (i.v.) dose was also administrated (5 mg/kg). The C s values for α-TLD and β-TLD were not significantly different (α = 56.2 ± 0.5 μg·mL -1 ; β = 55.2 ± 0.2 μg·mL -1 ). However, the dissolution profile of α-TLD presented the fastest rate and the largest extension of drug dissolution than that from β-TLD (80% in 4 h versus 55% in 4 h). The α-TLD provided a more favorable pharmacokinetic than the β-TLD (maximum plasma concentration - C max : 5.4 ± 0.90 μg·mL -1 versus 2.6 ± 0.2 μg·mL -1 ; area under the curve of the concentration-time profile from time zero to infinity - AUC 0-∞ : 44.3 ± 8.8 μg·h·mL -1 versus 33.9 ± 4.7 μg·h·mL -1 ; absolute bioavailability - F: 92.2 ± 18.5% versus 70.5 ± 9.9%, respectively). Drug suppliers and pharmaceutical companies should strictly control the technological processes involved in the TLD API synthesis as well as in the production of the pharmaceutical dosage form in order to guarantee the inter-batch homogeneity and therefore, product compliance., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The study objective is to describe patients and professionals' perspectives on the Tuberculosis Control Program (PCT) in Recife, Brazil, contributing to the program evaluation. A cross-sectional study was conducted in three purposively selected sites, representing the three levels of care in the public health system. All eligible PCT patients in sites A, B and C were invited to participate (n = 123). Physicians, nurses, pharmacists and community health agents providing care to PCT patients in these sites, plus their managers, were purposively selected. Data were collected by means of interviews with 44 patients and a questionnaire to 24 professionals. Instruments encompassed previously published items to capture stakeholders' perspectives (16 and 12 closed-questions, respectively), grouped into categories. The overall evaluation by patients was unsatisfactory (median score 35%; third quartile below 50%; interquartile range 21.9%). Analysis of scores by categories showed that opinions about organizational accessibility were significantly worse than about economic and geographical accessibility, taken together. Overall the median score attributed by professionals was 52% (third quartile below 65%). Professionals had significantly worse opinions about diagnosis, clinical and laboratory assistance. Patients and professionals' perspectives highlight potential opportunities for improvement. Our findings can be used by managers as a starting point for shared decision-making, potentially contributing to a better performance of the PCT in Recife and, consequently, reducing the risk posed by tuberculosis.

This work describes a solvent-free method for the chemical modification of cashew gum (Anacardium occidentale L.) using phthalic anhydride in different proportions with different reaction times. Four biopolymers were synthesized and characterized by FTIR, NMR, and elemental analysis. A computational chemistry study was conducted to understand better the reaction. Phthalated cashew gum was used in preparation of silver nanoparticles (AgNPs) by a conventional route, using sodium borohydride (NaBH 4 ) as reducing agent, and for green route. AgNPs were evaluated for antimicrobial activity and characterized by UV-Vis spectroscopy, FTIR, nanoparticle tracking analysis, Zeta Potential analysis, and atomic force microscopy. AgNPs produced by the green route had an average size of 51.9 nm and Zeta Potential of -55.8 mV, and AgNPs produced by the conventional method had an average size of 47.7 nm and Zeta Potential of -39.3 mV. AgNPs synthesized using phthalated cashew gum showed antimicrobial activity against Staphylococcus aureus and Escherichia coli., (Copyright © 2019. Published by Elsevier Ltd.)

The aim of this study was to evaluate the potential of combining multiple ASDs based on water soluble and insoluble polymers to reach and maintain poorly soluble posaconazole (PCZ) supersaturation over time. ASDs of PCZ were obtained with PVP/VA64 or an ammonio methacrylate copolymer by solvent evaporation method with a fixed 20% (wt/wt%) drug loading ratio and physical mixtures of these ASDs were prepared at various proportions. ASDs were characterized by Fourier transform infrared spectroscopy (FT-IR) and powder X-ray diffraction (PXRD) and compared to their respective physical mixture with crystalline PCZ. Crystalline PCZ equilibrium solubility was determined at pH 1.2-2 range. Dissolution profiles were constructed under non-sink condition with an adapted dissolution system. PXRD analysis demonstrated that both ASDs were at the amorphous state and FT-IR spectroscopy revealed that the analytical signal of PCZ was also absent in both ASDs. Equilibrium solubility of crystalline PCZ varied between 26.36 ± 0.32 (pH 2) to 609.33 ± 3.68 (pH 1.2) μg/mL. All ASDs reached higher concentrations than the equilibrium solubility of crystalline PCZ during dissolution. PVP/VA64 ASDs showed dominance over PCZ dissolution and recrystallization rates whereas Eudragit RS PO ASD alone did not cause PCZ recrystallization whatsoever. The combination containing 20 mg PVP/VA64 + 80 mg Eudragit RS PO as PCZ carriers obtained the highest AUC, suggesting that even after the PVP/VA64 part was completely dissolved, reaching a concentration above crystalline PC C s , the insoluble polymer could still release PCZ slowly and maintain supersaturation over time. The research demonstrated a potential of combining multiple ASDs to achieve distinct dissolution profiles while increasing the kinetic solubility of poorly soluble drugs., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Cashew gum (CG) is a biopolymer that presents a favorable chemical environment for structural modifications, which leads to more stable and resistant colloidal systems. The gum was subjected to an acetylation reaction using a fast, simple, solvent-free and low cost methodology. The derivative was characterized by infrared and NMR spectroscopy, elemental analysis, coefficient of solubility and zeta potential. The modified biopolymer was used as a platform for drug delivery systems using insulin as a model drug. Nanoparticles were developed through the technique of polyelectrolytic complexation and were characterized by size, surface charge, entrapment efficiency and gastrointestinal release profile. The nanoparticles presented size of 460 nm with a 52.5% efficiency of entrapment of insulin and the electrostatic stabilization was suggested by the zeta potential of + 30.6 mV. Sustained release of insulin was observed for up to 24 h. The results showed that acetylated cashew gum (ACG) presented potential as a vehicle for sustained oral insulin release., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Objective: To develop an analytical method to simultaneous quantification of benznidazole (BNZ) and posaconazole (POS) by high-performance liquid chromatography with diode-array detection (HPLC-DAD) using design of experiments., Methods: Percentages of organic phase, buffer pH and flow rates of mobile phase were selected as independent variables by full factorial design (33), totaling 27 experiments. Significant factors were evaluated using factorial analysis of variance with 95% confidence level. Method optimization was performed using desirability profiles, considering BNZ/POS chromatographic resolution and peak areas. Further, the method was evaluated regarding its suitability and properly validated according to the international compendiums using the parameters: specificity, linearity, accuracy, precision, limit of detection and limit of quantification., Results: The optimized method was achieved using Discovery® C8 column (250 mm × 4.6 mm; 5 μm particle size), methanol/acetate buffer (pH 3.5)(71:29) and detection at 260 nm. Retention times were 3.6 and 7.6 min for BNZ and POS, respectively, with good suitability of system and it was specific and linear (r2 >0.99) for both drugs, proving the efficiency of the method even in the presence of degradation products of POS., Conclusion: This new method is a great alternative to perform reliable, faster and cheaper analysis since the simultaneous quantification of the association BZN/POS is not reported yet in the literature.

Near-Infrared hyperspectral imaging (HSI-NIR) is a useful technique for pharmaceutical research and industry alike. It can provide important surface information such as the polymorphs quantification and its distribution over the tablet. Several chemometric tools are applied for this purpose, with MCR-ALS and PLS regression being the most common approaches. In this work, a detailed comparison between these two approaches is performed. Beyond a "simple" regression comparison, a comparison of the score images (local quantification) was also evaluated. The system under study is tablets with ternary mixtures of Mebendazol (MBZ) polymorphs, microcrystalline cellulose and magnesium stearate. PLS models, in general, gave lower RMSEP (below 1.7% w/w for the three MBZ polymorphs) than the corresponding MCR-ALS predictions. Analyzing the distributions of the scores in the images of each sample shows clear differences between the PLS and MCR-ALS models. The MCR-ALS gave more chemical meaningful distribution maps for all polymorphs, even though the PLS accurately predicts the average concentration across the image. The problem is that the PLS models used the main spectral regions to quantify each MBZ polymorph, but at the same time undermines the minor spectroscopic changes caused by the different polymorphs. Although this may seem as a minor deviation from the truth, the results clearly show that this deviation is detrimental for the analysis of the spatial distribution of the analytes. These results indicate that the optimal multivariate model for multivariate images depend on the goal of the analysis: global quantification or a distribution analysis., (Copyright © 2018 Elsevier B.V. All rights reserved.)

An adapted methodology for obtaining lipid nanoparticles that only uses the microwave reactor in the synthesis process was developed. The method has the following features: one-pot, one-step, fast, practical, economical, safe, readiness of scaling-up, lack of organic solvents and production of nanoparticles with low polydispersity index (PDI) (below 0.3). This new method was applied for the development of nanostructured lipid carriers (NLC) loaded with a hydrophilic drug, the antiretroviral agent zidovudine (AZT). The aim of the present work was to develop, evaluate and compare optimized NLC formulations produced by two different methods - hot ultrasonication and microwave-assisted method. The development and optimization of the NLC formulations were supported by a Quality by Design (QbD) approach. All formulations were physicochemically characterized by the same parameters. The optimized formulations presented a suitable profile for oral administration (particle size between 100 and 300 nm, PDI < 0.3 and negative zeta potential >-20 mV). Furthermore, the morphologies assessed by TEM showed spherical shape and confirmed the results obtained by DLS. Both AZT loaded formulations were physically stable for at least 45 days and non-toxic on Jurkat T cells. Drug release studies showed a controlled release of AZT under gastric and plasma-simulated conditions., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Olanzapine (OLZ), is used in the treatment of bipolar disorder and schizophrenia, diseases that present oxidative stress in their physiopathology. It has low aqueous solubility, which may lead to low oral bioavailability. The search of new drug delivery systems (DDSs) that may increase dissolution rate of OLZ, associated with the investigation of the antioxidant potential of the loaded-systems become of major importance to understand improvement in bipolar disorder and schizophrenia therapy. Thus, this study aimed to evaluate the in vitro antioxidant potential of two different Layered Double Hydroxides (LDH) loaded with 5% of OLZ (CaAl and NiAl), by radical scavenging activity (2,2-Diphenyl-1-picrylhydrazyl and nitric oxid); radical cation scavenging activity (2,2'-azino-bis3-ethylbenzthiazoline-6-sulfonic acid ABTS) and evaluation of inhibition capacity of lipid peroxidation by thiobarbituric acid (TBARS). The results showed that both obtained LDH systems presented in vitro antioxidant capacity when associated with OLZ in all methods performed, and this activity is more pronounced with the systems containing OLZ compared to pure drug. The systems with CaAl was shown to have increased antioxidant potential, compared to NiAl, increasing the antioxidant activity up to 40,83%, 15,84% and 16,73%, as showed by the DPPH, nitric oxide and TBARS tests, respectively. The results revealed that the use of LDHs as a functional excipient may be promising in the pharmaceutical industry for bipolar disorder and schizophrenia therapy., (Copyright © 2018. Published by Elsevier Inc.)

Posaconazole (PCZ) and benznidazole (BNZ) are known to show synergetic effect in treating the acute and chronic phases of Chagas disease, a neglected parasitic disease. However, as both compounds are poorly water soluble, the development of amorphous solid dispersions (ASDs) of a PCZ/BNZ fixed-dose combination in a water-soluble polymer becomes an attractive option to increase their apparent solubility and dissolution rate, potentially improving their oral bioavailability. The initial approach was to explore solvent evaporated solid dispertion (SD) systems for a PCZ/BNZ 50:50 (wt%) combination at several total drug loading levels (from SD with 10% to 50% drug loading) in water-soluble carriers, including polyvinylpyrrolidone (PVP K-30) and vinylpyrrolidone-vinyl acetate copolymer (PVPVA 64). Based on comparison of non-sink in vitro dissolution performance, ASD systems based on PVPVA was identified as the most effective carrier for a 50:50 (w/w %) fixed-dose combination of PCZ/BNZ to increase their apparent solubility and dissolution rate, mainly at 10% drug loading, which shows more expressive values of area under the curve (AUC) (7336.04 ± 3.77 min.μL/mL for PCZ and 15,795.02 ± 7.29 min.μL/mL for BNZ). Further characterization with polarized microscopy, powder X-ray diffraction, and thermal analysis reveals that there exists a threshold drug loading level at about 30% PCZ/BNZ, below which ASDs are obtained and above which a certain degree of crystallinity tends to result. Moreover, infrared spectroscopic analysis reveals the lack of hydrogen bonding interactions between the drugs (PCZ and BNZ) and the polymer (PVPVA) in the ASD, this is also confirmed through molecular dynamics simulations. The molecular modeling results further show that even in the absence of meaningful hydrogen bonding interactions, there is a greater tendency for PVPVA to interact preferentially with PCZ and BNZ through electrostatic interactions thereby contributing to the stability of the system. Thus, the present SD system has the advantage of presenting a fixed-dese combination of two synergistic antichagasic agents PCZ and BNZ together in amorphous form stabilized in the PVPVA matrix with enhanced dissolution, potentially improving their bioavailability and therapeutic activity in treating Chagas disease., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Chitosan is a natural copolymer generally available in pharmaceutical and food powders associated with drugs, vitamins, and nutraceuticals. This study focused on monitoring the effect of the morphology and structural features of the chitosan particles for controlling the release profile of the active pharmaceutical ingredient (API) propranolol hydrochloride. Chitosan with distinct molecular mass (low and medium) were used in the formulations as crystalline and irregular particles from commercial raw material, or as spherical, uniform, and amorphous spray-dried particles. The API⁻copolymer interactions were assessed when adding the drug before (drug-loaded particles) or after the spray drying (only mixed with blank particles). The formulations were further compared with physical mixtures of the API with chitin and microcrystalline cellulose. The scanning electron microscopy (SEM) images, surface area, particle size measurements, X-ray diffraction (XRD) analysis and drug loading have supported the drug release behavior. The statistical analysis of experimental data demonstrated that it was possible to control the drug release behavior (immediate or slow drug release) from chitosan powders using different types of particles., Competing Interests: The authors declare no conflict of interest.

Benznidazole (BNZ), the only commercialized antichagasic drug, and the antifungal compound posaconazole (PCZ) have shown synergistic action in the therapy of Chagas disease, however both active pharmaceutical ingredients (APIs) exhibit low aqueous solubility potentially limiting their bioavailability and therapeutic efficacy. In this paper, we report for the first time the formation of a eutectic mixture as well as an amorphous solid solution of PCZ and BNZ (at the same characteristic ratio of 80:20wt%), which provided enhanced solubility and dissolution rate for both APIs. This eutectic system was characterized by DSC and the melting points obtained were used for the construction of a phase diagram. The preservation of the characteristic PXRD patterns and the IR spectra of the parent APIs, and the visualization of a characteristic eutectic lamellar crystalline microstructure using Confocal Raman Microscopy confirm this system as a true eutectic mixture. The PXRD result also confirms the amorphous nature of the prepared solid solution. Theoretical chemical analyses indicate the predominance of π-stacking interactions in the amorphous solid solution, whereas an electrostatic interaction between the APIs is responsible for maintaining the alternating lamellar crystalline microstructure in the eutectic mixture. Both the eutectic mixture and the amorphous solid solution happen to have a characteristic PCZ to BNZ ratio similar to that of their pharmacological doses for treating Chagas disease, thus providing a unique therapeutic combination dose with enhanced apparent solubility and dissolution rate., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Purpose: An optimized methodology for the development of a new generation of lipid nanoparticles, the multiple lipid nanoparticles (MLN) is described. MLN have characteristics between nanostructured lipid carriers (NLC) and multiple emulsions (W/O/W), but without the outer aqueous phase., Methods: The production is based on a hot homogenization method combined with high shear and ultrasonication. The antiretroviral agent lamivudine (3TC), was loaded in the MLN. For comparison purposes, NLC-3TC formulation was also developed and physico-chemically characterized by the same parameters as MLN-3TC. The development and optimization of MLN and NLC formulations were supported by a Quality by Design (QbD) approach., Results: The MLN-3TC formulation exhibited a size of about 450 nm, polydispersity <0.3 and negative zeta potential > -20 mV. Furthermore, the morphology assessed by TEM showed a structure with multiples aqueous vacuoles. MLN-3TC was physically stable for at least 45 days, had low cytotoxicity and drug release studies showed a sustained and controlled release of 3TC under gastric and plasma-simulated conditions (at pH 7.4 for about 45 h)., Conclusions: The optimized formulations present suitable profiles for oral administration. Overall, the results reveal that MLN present higher loading capacity and storage stability than NLC.

Several factors can intervene in the molecular properties and consequently in the stability of drugs. The molecular complexes formation often occur due to favor the formation of hydrogen bonds, leading the system to configuration more energy stable. This work we aim to investigate through theoretical and experimental methods the relation between stability and properties of molecular complexes the molecular complex formed between the drugs, efavirenz (EFV), lamivudine (3TC) and zidovudine (AZT). With this study was possible determining the most stable complex formed between the compounds evaluated. In addition the energy and structural properties of the complex formed in relation to its individual components allowed us to evaluate the stability of the same., (Copyright © 2016. Published by Elsevier B.V.)

The development of delivery systems using natural polymers such as gums offers distinct advantages, such as, biocompatibility, biodegradability, and cost effectiveness. Cashew gum (CG) has rheological and mucoadhesive properties that can find many applications, among which the design of delivery systems for drugs and other actives such as larvicide compounds. In this review CG is characterized from its source through to the process of purification and chemical modification highlighting its physicochemical properties and discussing its potential either for micro and nanoparticulate delivery systems. Chemical modifications of CG increase its reactivity towards the design of delivery systems, which provide a sustained release effect for larvicide compounds. The purification and, the consequent characterization of CG either original or modified are of utmost importance and is still a continuing challenge when selecting the suitable CG derivative for the delivery of larvicide compounds., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Efavirenz (EFZ) is one of the most used drugs in the treatment of AIDS and is the first antiretroviral choice. However, since it has low solubility, it does not exhibit suitable bioavailability, which interferes with its therapeutic action and is classified as a class II drug according Biopharmaceutical Classification System (low solubility and high permeability). Among several drug delivery systems, the multicomponent systems with cyclodextrins and hydrophilic polymers are a promising alternative for increasing the aqueous solubility of the drug. The present study aimed to develop and characterize in a ternary system of EFZ, MβCD and PVP K30. The results showed that the solid ternary system provided a large increase in the dissolution rate which was greater than 80% and was characterized by DSC, TG, XRD, FT-IR and SEM. The use of the ternary system (EFZ, MβCD and PVP K30 1%) proved to be a viable, effective and safe delivery of the drug. The addition of the hydrophilic polymer appeared to be suitable for the development of a solid oral pharmaceutical product, with possible industrial scale-up and with low concentration of CDs (cyclodextrins)., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Unlabelled: Abstract Context: Benznidazole (BNZ) is an antiparasitic with trypanocidal properties for the etiological treatment of Chagas disease since 1973. Monitoring the stability of this drug is one of the most effective methods of assessment, forecasting and prevention of problems related to quality product., Objective: To investigate the direct and indirect photodegradation of BNZ and to evaluate the interference of the excipients used in the forms dosage solid as well as to shed light on the chemical structure of the degradation products obtained., Materials and Methods: To perform this work we adopted the "ICH Harmonised Tripartite Guideline: Photostability Testing of New Drug Substances and Products Q1B" (Guideline Q1B). We used benzonidazole (BNZ) (N-benzil-2-(2-nitroimidazol-1-il) acetamide) (LAFEPE®, Recife, Brazil) and various excipients; beyond high-performance liquid chromatography (HPLC), differential scanning calorimetry (DSC), infrared spectroscopy (IR) and mass spectrometry/mass spectrometry (MS/MS). The indirect photodegradation of BNZ was carried out using physical mixtures with 13 pharmaceutical excipients commonly used in the preparation of solid dosage forms., Results: HPLC and MS/MS techniques were selected for the identification of two photoproducts (PPs) and photoreactions found in direct and indirect tests with the microcrystalline cellulose, considered a critical excipient., Discussion: Despite variations in the infrared spectrometry, differential scanning calorimetry and differential thermogravimetry curves, these techniques are not conclusive since the study of photodegradation of the drug caused decay of 30%, according to the ICH., Conclusions: The results show that BNZ only undergoes direct photodegradation, since no new PPs were found for a combination of the drug and excipients.

Efavirenz (EFV) used as a part of the treatment of first choice in antiretroviral therapy for AIDS has low aqueous solubility and presents problems of absorption. We thus initially present a phase solubility diagram with carriers of different classes. With a view to obtaining a solid dispersion (SD) with suitable consistency to that of a solid formulation, we chose to use PVP K-30, since polymers present some of the best results. The kneading (KN) and solvent evaporation (EV) methods were thus used at different rates. These were characterized by the way of DSC, FT-IR, SEM, DR-X and dissolution. SD EV proved unsatisfactory, resulting in a decreased dissolution rate, despite the amorphous state of the samples, while the SD KN 4:1 (EFV:polymer) and physical mixtures (PM) had a higher rate of dissolution. SD KN and PM 4:1 were also evaluated for stability after storage, with benefits being observed in relation to EFV., (Copyright © 2014. Published by Elsevier Ltd.)

2-[(2,6-dichlorobenzylidene)amino]-5,6-dihydro-4H-cyclopenta[b]thiophene-3-carbonitrile), 5TIO1, is a new 2-aminothiophene derivative with a promising pharmacological activity. The aim of this work was to evaluate the potential anxiolytic effect of 5TIO1 in animal models. In the elevated plus-maze test, 5TIO1 (0.1, 1.0 and 10.0 mg/kg, i.p) increased the time of permanence and the number of entries in the open arms. In the light/dark box test, 5TIO1 at dose of 0.1 mg/kg (i.p) also showed anxiolytic-like effect indicated by an increase in the time spent in the light box, similar to diazepam 2.0 mg/kg (i.p). 5TIO1 groups did not change locomotor and coordination activities in open field and rotarod tests, respectively, when compared to vehicle. Dose dependent process was not observed and the anxiolytic effects demonstrated were not completely reversed by flumazenil 25 mg/kg (i.p). Our results suggest that 5TIO1 can bind with other receptors, besides the benzodiazepine site of the GABA receptor in mouse brain.

2-[(2,6-Dichlorobenzylidene)amino]-5,6-dihydro-4H-cyclopenta[b]thiophene-3-carbonitrile, 5TIO1, is a new 2-aminothiophene derivative with promising pharmacological activities. The aim of this study was to evaluate its antioxidant activity in different areas of mice central nervous system. Male Swiss adult mice were intraperitoneally treated with Tween 80 dissolved in 0.9% saline (control group) and 5TIO1 (0.1, 1, and 10 mg kg(-1)). Brain homogenates-hippocampus, striatum, frontal cortex, and cerebellum-were obtained after 24 h of observation. Superoxide dismutase and catalase activities, lipid peroxidation and nitrite content were measured using spectrophotometrical methods. To clarify the 5TIO1's mechanism on oxidative stress, western blot analysis of superoxide dismutase and catalase was also performed. 5TIO1 decreased lipid peroxidation and nitrite content in all brain areas and increased the antioxidant enzymatic activities, specially, in cerebellum. The data of Western blot analysis did not demonstrate evidence of the upregulation of these enzymes after the administration of this compound. Our findings strongly support that 5TIO1 can protect the brain against neuronal damages regularly observed during neuropathologies.

Olanzapine (OLP), the most important atypical antipsychotic drug of the new generation, a high cost drug, has low aqueous solubility, affecting its dissolution and absorption. Its complexation with modified cyclodextrins (CDs) is designed to achieve novel vectorization systems with higher solubility, consequently higher bioavailability. From the CD selection, among β-CD, methyl-β-CD (MβCD) and hydroxypropyl-β-CD, it was obtained a phase solubility diagram suggesting a 1:1 (mol:mol) OLP-CD stoichiometry and complexation constants of 966.9, 149.4 and 91.1 L/mol, respectively. The MβCD was selected for the inclusion complexes (IC) attainment, a physical mixture (PM) and a rotatory evaporator product (ROE). The analysis showed differences in the structure, morphology and performance of OLP, MβCD, PM and ROE, revealing the occurrence of interactions between drug and CD. The ROE presented the higher dissolution efficiency and stability. The results suggest that the IC was formation, being a technological resource efficient and profitable for drug delivery., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Benznidazole (BNZ) is the drug of choice for Chagas disease treatment, which affects about 9.8 million people worldwide. It has low solubility and high toxicity. The present study aimed to develop and characterize inclusion complexes (IC) in binary systems (BS) with BNZ and randomly methylated-β-cyclodextrin (RMβCD) and in ternary systems (TS) with BNZ, RMβCD and hydrophilic polymers. The results showed that the solid BS had a large increase in dissolution rate (Q>80%). For the solid IC obtained, the kneading method, in ratio of 1:0.17 (77.8% in 60 min), appeared to be the most suitable for the development of a solid oral pharmaceutical product, with possible industrial scale-up and low concentration of CD. The solid TS containing 0.1% of hydroxypropylmethylcellulose (HPMC) showed no significant advantages compared to the binary IC in solid state. The use of cyclodextrins proved to be a viable tool for effective, standardized and safe drug delivery., (Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.)

The present study investigates the release mechanism of benznidazole (BNZ) in solid dispersions with polyethylene glycol 6000 (PEG 6000) and polyvinylpirrolydone K-30 (PVP K-30), with a view to observing the increase in solubility of BNZ in water in the presence of these two hydrophilic polymers. The interaction of BNZ with the polymers was evaluated using scanning electron microscopy, Fourier-transformation infrared spectroscopy, differential scanning calorimetry, X-ray diffraction, and in vitro dissolution tests, and a theoretical study of molecular modeling was also carried out. The drug-polymer interaction was studied trough molecular modeling, using density functional theory with the B3LYP exchange correlation function. The corrected interaction energies were calculated to be -20.9 kJ/mol with PVP and -6.6 kJ/mol with PEG. The experimental and theoretical results indicate that a powerful interaction occurred between BNZ and the polymers, which was especially strong in the case of PVP, and that this interaction contributed to improvement of BNZ solubility., (Copyright © 2011 Wiley-Liss, Inc.)

This work aimed the studies of physicochemical characterization, thermal stability, and compatibility of benznidazole (BNZ) drug by spectroscopy (NMR, IR), thermoanalytical (differential thermal analysis, differential scanning calorimetry, and thermogravimetry), and chromatographic (HPLC) techniques, beyond the analytical tools of Van't Hoff equation and Ozawa model. The compatibility study was conducted by binary mixtures (1:1, w/w) of the drug with microcrystalline cellulose 102 and 250, anhydrous lactose, and sodium starch glycolate. The physicochemical characterization confirmed data reported in scientific literature, guaranteeing authenticity of the analyzed raw material. The drug melts at 191.68°C (∆H, 119.71 J g(-1)), characteristic of a non-polymorphic raw material, and a main stage decomposition at 233.76-319.35°C (∆m, 43.32%) occurred, ending the study with almost all mass volatilized. The quantification of drug purity demonstrated a correlation of 99.63% between the data obtained by chromatographic (99.20%) and thermoanalytical technique (99.56%). The Arrhenius equation and Ozawa model showed a zero-order kinetic behavior for the drug decomposition, and a calculated provisional validity time was 2.37 years at 25°C. The compatibility study evidenced two possible chemical incompatibilities between BNZ and the tested excipients, both associated by the authors to the reaction of the BNZ's amine and a polymer carbohydrate's carbonile, being maillard reactions. The BNZ reaction with anhydrous lactose is more pronounced than with the sodium starch glycolate because the lactose has more free hydroxyl groups to undergo reduction by the drug. In this sense, this work guides the development of a new solid pharmaceutical product for Chagas disease treatment, with defined quality control parameters and physicochemical stability.

THE CONFORMATION OF THE TITLE COMPOUND [SYSTEMATIC NAME: N-benzyl-2-(2-nitro-imidazol-1-yl)acetamide], C(12)H(12)N(4)O(3), can be described in terms of the relative orientation of three planar fragments, the imidazol group (A), benzyl group (B), and the acetamide fragment (C), with corresponding dihedral angles: A/C = 88.17 (4), B/C = 67.12 (5) and A/B = 21.11 (4)°. The crystal packing is enhanced by a network of strong inter-molecular N-H⋯O hydrogen bonds.