Search

During the course of infection, Salmonella must successively survive the harsh acid stress of the stomach and multiply into a mild acidic compartment within macrophages. Inducible amino acid decarboxylases are known to promote adaptation to acidic environments, as lysine decarboxylation to cadaverine. The idea of Salmonella defenses responses could be employed in systems as polydiacetylene (PDA) to detect this pathogen so important to public health system. Beside that PDA is an important substance because of the unique optical property; that undergoes a colorimetric transitions by various external stimuli. Therefore 10,12-pentacosadyinoic acid (PCDA)/Sphingomyelin(SPH)/Cholesterol(CHO)/Lysine system was tested to determine the colorimetric response induced by Salmonella choleraesuis. PCDA/SPH/CHO/Lysine vesicles showed a colour change even in low S. choleraesuis concentration present in laboratory conditions and in chicken meat. Thus, this work showed a PCDA/SPH/CHO/Lysine vesicle application to simplify routine analyses in food industry, as chicken meat industry., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Nanocomposites of chitosan (CS) were developed and characterized in a full factorial design with varying levels of montmorillonite (MMTNa) and encapsulated tocopherol (toc-encap). The structural properties (XRD, FTIR), morphology (TEM), hygroscopic properties (water vapour permeability, hydrophobicity, sorption isotherms) and optical properties (haze, CIELab parameters) of the resulting materials were evaluated. Toc-encap contents up to 10% influenced the intercalation of MMTNa in the CS matrix, resulting in films with reduced water vapour permeability (3.48×10(-11)(g/msPa)), increased hydrophobicity (ΔGHydroph |7.93-59.54|mJm(-2)) and lower equilibrium moisture content (EMC), thus showing potential for active food packaging materials. At levels above 10%, toc-encap agglomerates occurred, which deteriorated the properties of the resulting films, as shown with the TEM. As the toc-encap content increased, the films became slightly more yellow, more irregular and less transparent, with a higher haze index., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Consumers are increasingly demanding foods with lower synthetic preservatives. Plant essential oils are natural compounds with remarkable antimicrobial properties and may be incorporated as emulsions into water-soluble polymers to form antimicrobial films. Coarse emulsions (diameters of 1.3-1.9 μm) and nanoemulsions (diameters of 180-250 nm) of clove bud (Syzygium aromaticum) and oregano (Origanum vulgare) essential oils were produced through low-speed mixing and ultrasonication, respectively. Methylcellulose was added for film-forming purposes. Both essential oils reduced the rigidity and increased the extensibility of the methylcellulose films, effects that were even more pronounced for nanodroplets. Both essential oils lessened the counts of yeasts and molds in sliced bread during 15 days, and droplet size reduction provided a further improvement in antimicrobial properties. Due to increased bioavailability, less preservative content might be used and still deliver the same antimicrobial efficiency if encapsulated in smaller particles.

We developed antimicrobial packaging incorporated with allyl isothiocyanate (AIT) and carbon nanotube (CNT), and this packaging was used for shredded cooked chicken meat inoculated with Salmonella Choleraesuis. The following parameters were analysed during the 40 days of storage: microbial counts, colour characteristics and changes in the oxidation of the meat as well as changes in the mechanical properties of the film, the structure of the antimicrobial film and the diffusion of the antimicrobial agent into the food. The incorporation of AIT into the films increased the elongation at the break (E) value of the films and decreased the tensile strength (TS) value of the films. The CNT was important to retain the AIT which is a volatile substance in the film. The diffusion of the AIT from the film into the chicken reduced the microbial contamination, controlled oxidation and reduced the colour changes. Thus, these packages were effective for the 40 days of storage., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

This work aimed to develop nanocomposite films of methyl cellulose (MC) incorporated with pediocin and zinc oxide nanoparticles (nanoZnO) using the central composite design and response surface methodology. This study evaluated film physical-mechanical properties, including crystallography by X-ray diffraction, mechanical resistance, swelling and color properties, microscopy characterization, thermal stability, as well as antimicrobial activity against Staphylococcus aureus and Listeria monocytogenes. NanoZnO and pediocin affected the crystallinity of MC. Load at break and tensile strength at break did not differ among films. NanoZnO and pediocin significantly affected the elongation at break. Pediocin produced yellowish films, but nano ZnO balanced this effect, resulting in a whitish coloration. Nano ZnO exhibited good intercalation in MC and the addition of pediocin in high concentrations resulted crater-like pits in the film surfaces. Swelling of films diminished significantly compared to control. Higher concentrations of Nano ZnO resulted in enhanced thermal stability. Nanocomposite films presented antimicrobial activity against tested microorganisms., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Blue polydiacetylene vesicles were studied with regard to their behaviour under variations in storage temperature, heating, potentiometric titration and in the presence of chemical components of milk, to evaluate their application as a sensor in the food industry. Vesicles were prepared using 10,12-pentacosadienoic acid (PCDA)/1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine (DMPC). Their changes were monitored using UV-Vis absorption. Temperatures not exceeding 25°C did not cause colour change in PCDA/DMPC vesicles for a period of up to 60days of storage. Heating for 10min at 60 and 90°C, exposure to pH higher than 9.0 and the simulant solutions of the whey proteins, β-lactoglobulin and α-lactalbumin, promoted colour change from blue to red for the vesicles studied. The effects of routine factors on the characteristics and stability of polydiacetylene vesicles is important in defining the parameters related to their application as a sensor for the food industry., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

A method consisting of multiple headspace solid-phase microextraction followed by gas chromatography-mass spectrometry analysis was developed and used to determine the main volatile radiolysis products formed by γ-irradiation of flexible multilayer food packaging samples. The developed method allows the use of solid-phase microextraction in the quantification of compounds from plastic solid samples. A screening of volatiles in the γ-irradiated and non-irradiated films was performed and 29 compounds were identified in the irradiated packaging, 17 of which were absent in the non-irradiated samples. The main volatile radiolysis products identified were: 1,3-di-tert-butylbenzene; 2,6-di-tert-butyl-1,4-benzoquinone; 4-tert-butyl-phenol and the off-odor compounds butanoic acid and valeric acid. These volatile radiolysis compounds were determined with the proposed method and the results are shown and discussed. Solid-liquid extraction and headspace solid-phase microextraction methods were also studied for comparative purposes. The automated solvent-free multiple HSPME technique here presented can be used to quantify the radiolysis compounds in irradiated plastic solid samples in a simple way with the advantages of being free from matrix influence and environmentally friendly., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Background: Peanut contamination by fungi is a concern of processors and consumers owing to the association of these micro-organisms with quality deterioration and aflatoxin production. In this study the fungicidal and detoxifying effects of ozone on aflatoxins in peanuts was investigated. Peanut kernels were ozonated at concentrations of 13 and 21 mg L⁻¹ for periods of 0, 24, 48, 72 and 96 h., Results: Ozone was effective in controlling total fungi and potentially aflatoxigenic species in peanuts, with a reduction in colony-forming units per gram greater than 3 log cycles at the concentration of 21 mg L⁻¹ after 96 h of exposure. A reduction in the percentage of peanuts with internal fungal populations was also observed, particularly after exposure to ozone at 21 mg L⁻¹. A reduction in the concentrations of total aflatoxins and aflatoxin B1 of approximately 30 and 25% respectively was observed for kernels exposed to ozone at 21 mg L⁻¹ for 96 h., Conclusion: It was concluded that ozone is an important alternative for peanut detoxification because it is effective in controlling potentially aflatoxigenic fungi and also acts in the reduction of aflatoxin levels in kernels., (Copyright © 2011 Society of Chemical Industry.)

We report the synthesis of 10,12-pentacosadyinoic acid (PCDA) and PCDA + cholesterol (CHO) + sphingomyelin (SPH) vesicles dispersed in water and the determination of their colorimetric response induced by small amount of organic solvents. In the absence of solvent, PCDA and PCDA/CHO/SPH vesicles showed an intense blue color. The addition of CHCl(3), CH(2)Cl(2), and CCl(4) caused a colorimetric transition (CT) in both structures with the following efficiency: CHCl(3) > CH(2)Cl(2) ≅ CCl(4). However, CH(3)OH did not cause a blue-to-red transition. By microcalorimetric technique we also determined, for the first time, the enthalpy change associated with the CT process and the energy of interaction between solvent molecules and vesicle self-assembly. We observed that the chloride solvents induced a colorimetric transition, but the thermodynamic mechanism was different for each of them. CT induced by CHCl(3) was enthalpically driven, while that caused by CH(2)Cl(2) or CCl(4) was entropically driven.

Antimicrobial polyethylene and cellulose based films incorporated with triclosan were studied. The antimicrobial efficacy, the hydrophobicity, microscopic and the mechanical characteristics of the films, as well free energy of adhesion between bacteria and antimicrobial films were evaluated. It was observed that both polyethylene and cellulose based films incorporated with the antimicrobial were homogeneous. Furthermore, the addition of triclosan did not affect mechanical characteristics of the films (P > 0.05). However, triclosan incorporated into polyethylene films reduced its hydrophobicity while antimicrobial cellulose based films became more hydrophobic. The adhesion was thermodynamically favorable between tested bacteria and polyethylene films. On the other hand, the adhesion to triclosan cellulose based film was thermodynamically unfavorable to Staphylococcus aureus and Escherichia coli and favorable to Listeria innocua and Pseudomonas aeruginosa. Polyethylene and cellulose based films showed inhibitory effect against S. aureus and E. coli, being the inhibition halo higher for polyethylene films. This study improves the knowledge about antimicrobial films.