Search

Li-ion battery performance is strongly influenced by their cathodes' properties and consequently by the 3D microstructure of the particles the cathodes are comprised of. During calendaring and cycling, cracks develop within cathode particles, which may affect performance in multiple ways. On the one hand, cracks reduce internal connectivity such that electron transport within cathode particles is hindered. On the other hand, intra-particle cracks can increase the cathode reactive surface. Due to these contradictory effects, it is necessary to quantitatively investigate how battery cycling effects cracking and how cracking in-turn influences battery performance. Thus, it is necessary to characterize the 3D particle morphology with structural descriptors and quantitatively correlate them with effective battery properties. Typically, 3D structural characterization is performed using image data. However, informative 3D imaging techniques are time-consuming, costly and rarely available, such that analyses often have to rely on 2D image data. This paper presents a novel stereological approach for generating virtual 3D cathode particles that exhibit crack networks that are statistically equivalent to those observed in 2D sections of experimentally measured particles. Consequently, more easily available 2D image data suffices for deriving a full 3D characterization of cracked cathodes particles. In future research, the virtually generated 3D particles will be used as geometry input for spatially resolved electro-chemo-mechanical simulations, to enhance our understanding of structure-property relationships of cathodes in Li-ion batteries.

Understanding structure-property relationships of Li-ion battery cathodes is crucial for optimizing rate-performance and cycle-life resilience. However, correlating the morphology of cathode particles, such as in NMC811, and their inner grain architecture with electrode performance is challenging, particularly, due to the significant length-scale difference between grain and particle sizes. Experimentally, it is currently not feasible to image such a high number of particles with full granular detail to achieve representivity. A second challenge is that sufficiently high-resolution 3D imaging techniques remain expensive and are sparsely available at research institutions. To address these challenges, a stereological generative adversarial network (GAN)-based model fitting approach is presented that can generate representative 3D information from 2D data, enabling characterization of materials in 3D using cost-effective 2D data. Once calibrated, this multi-scale model is able to rapidly generate virtual cathode particles that are statistically similar to experimental data, and thus is suitable for virtual characterization and materials testing through numerical simulations. A large dataset of simulated particles with inner grain architecture has been made publicly available.

Bayesian parameter inference is useful to improve Li-ion battery diagnostics and can help formulate battery aging models. However, it is computationally intensive and cannot be easily repeated for multiple cycles, multiple operating conditions, or multiple replicate cells. To reduce the computational cost of Bayesian calibration, numerical solvers for physics-based models can be replaced with faster surrogates. A physics-informed neural network (PINN) is developed as a surrogate for the pseudo-2D (P2D) battery model calibration. For the P2D surrogate, additional training regularization was needed as compared to the PINN single-particle model (SPM) developed in Part I. Both the PINN SPM and P2D surrogate models are exercised for parameter inference and compared to data obtained from a direct numerical solution of the governing equations. A parameter inference study highlights the ability to use these PINNs to calibrate scaling parameters for the cathode Li diffusion and the anode exchange current density. By realizing computational speed-ups of 2250x for the P2D model, as compared to using standard integrating methods, the PINN surrogates enable rapid state-of-health diagnostics. In the low-data availability scenario, the testing error was estimated to 2mV for the SPM surrogate and 10mV for the P2D surrogate which could be mitigated with additional data.

To plan and optimize energy storage demands that account for Li-ion battery aging dynamics, techniques need to be developed to diagnose battery internal states accurately and rapidly. This study seeks to reduce the computational resources needed to determine a battery's internal states by replacing physics-based Li-ion battery models -- such as the single-particle model (SPM) and the pseudo-2D (P2D) model -- with a physics-informed neural network (PINN) surrogate. The surrogate model makes high-throughput techniques, such as Bayesian calibration, tractable to determine battery internal parameters from voltage responses. This manuscript is the first of a two-part series that introduces PINN surrogates of Li-ion battery models for parameter inference (i.e., state-of-health diagnostics). In this first part, a method is presented for constructing a PINN surrogate of the SPM. A multi-fidelity hierarchical training, where several neural nets are trained with multiple physics-loss fidelities is shown to significantly improve the surrogate accuracy when only training on the governing equation residuals. The implementation is made available in a companion repository (https://github.com/NREL/pinnstripes). The techniques used to develop a PINN surrogate of the SPM are extended in Part II for the PINN surrogate for the P2D battery model, and explore the Bayesian calibration capabilities of both surrogates.

Electrochemical energy storage is central to modern society -- from consumer electronics to electrified transportation and the power grid. It is no longer just a convenience but a critical enabler of the transition to a resilient, low-carbon economy. The large pluralistic battery research and development community serving these needs has evolved into diverse specialties spanning materials discovery, battery chemistry, design innovation, scale-up, manufacturing and deployment. Despite the maturity and the impact of battery science and technology, the data and software practices among these disparate groups are far behind the state-of-the-art in other fields (e.g. drug discovery), which have enjoyed significant increases in the rate of innovation. Incremental performance gains and lost research productivity, which are the consequences, retard innovation and societal progress. Examples span every field of battery research , from the slow and iterative nature of materials discovery, to the repeated and time-consuming performance testing of cells and the mitigation of degradation and failures. The fundamental issue is that modern data science methods require large amounts of data and the battery community lacks the requisite scalable, standardized data hubs required for immediate use of these approaches. Lack of uniform data practices is a central barrier to the scale problem. In this perspective we identify the data- and software-sharing gaps and propose the unifying principles and tools needed to build a robust community of data hubs, which provide flexible sharing formats to address diverse needs. The Battery Data Genome is offered as a data-centric initiative that will enable the transformative acceleration of battery science and technology, and will ultimately serve as a catalyst to revolutionize our approach to innovation., Comment: corrected author list