Search

We report the use of delta-doped charge-coupled devices (CCDs) for direct detection of electrons in the 50–1500 eV energy range. We show that modification of the CCD back surface by molecular beam epitaxy can greatly improve sensitivity to low-energy electrons by introducing an atomically abrupt dopant profile to eliminate the dead layer. Using delta-doped CCDs, we have extended the energy threshold for detection of electrons by over an order of magnitude. We have also measured high gain in response to low-energy electrons using delta-doped CCDs. The effect of multiple electron hole pair production on the observed signals is discussed. Electrons have been directly imaged with a delta-doped CCD in the 250–750 eV range.

Delta-doped CCDs have achieved stable quantum efficiency, at the theoretical limit imposed by reflection from the Si surface in the near UV and visible. In this approach, an epitaxial silicon layer is grown on a fully-processed CCD using molecular beam epitaxy. During the silicon growth on the CCD, 30 percent of a monolayer of boron atoms are deposited nominally within a single atomic layer, resulting in the effective elimination of the backside potential well. In this paper, we will briefly discuss delta-doped CCDs and their application of low-energy electron detection. We show that modification of the surface this way can greatly improve sensitivity to low-energy detection. We show that modification of the surface this way can greatly improve sensitivity to low-energy electrons. Measurements comparing the response of delta-doped CCDs with untreated CCDs were made in the 50 eV-1.5 keV energy range.For electrons with energies below 300 eV, the signal from untreated CCDs was below the detection limit for our apparatus, and data are presented only for the response of delta-doped CCDs at these energies. The effects of multiple electron hole pair production and backscattering on the observed signals are discussed.

Silicon CCDs have limited sensitivity to particles and photons with short penetration depth, due to the surface depletion caused by the inherent positive charge in the native oxide. Because of surface depletion, internally-generated electrons are trapped near the irradiated surface and therefore cannot be transported to the detection circuitry. This deleterious surface potential can be eliminated by low-temperature molecular beam epitaxial (MBE) growth of a delta-doped layer on the Si surface. This effect has been demonstrated through achievement of 100% internal quantum efficiency for UV photons detected with delta-doped CCDs. In this paper, we will discuss the modification of the band bending near the CCD surface by low-temperature MBE and report the application of delta-doped CCDs to low-energy electron detection. We show that modification of the surface can greatly improve sensitivity to low-energy electrons. Measurements comparing the response of delta-doped CCDs with untreated CCDs were made in the 50 eV-1.5 keV energy range. For electrons with energies below 300 eV, the signal from untreated CCDs was below the detection limit for our apparatus, and data are presented only for the response of delta-doped CCDs at these energies. The effects of multiple electron hole pair (EHP) production and backscattering on the observed signals are discussed.