Search

Composite materials have distinct properties such as a high strength-to-weight ratio, high corrosion resistance, a high modulus-to-weight ratio and wear resistance. The potential, strong mechanical properties and lower cost of E-glass fiber motivated the authors to carry out this work. Tensile, flexural and Izod impact tests were used in the current study to conduct a static analysis of an E-glass-reinforced isophthalic polyester composite and an E-glass-reinforced general-purpose (GP) or orthophthalic polyester composite. The thermal–mechanical behavior was investigated using thermogravimetric analysis and dynamic mechanical analysis tests. Furthermore, the surface morphology of the tested composites was examined using scanning electron microscopy (SEM). When compared with the E-glass-reinforced GP polyester composite, the E-glass–isophthalic polyester composite demonstrated superior flexural properties and thermal stability. However, the tensile and impact properties of the E-glass–GP polyester composite were found to be higher than those of the E-glass–isophthalic polyester composite. SEM images show fiber pullout, matrix cracking and fiber breakage, among other things. The loss modulus and damping values of the E-glass-reinforced GP polyester composite were found to be greater than those of the E-glass-reinforced isophthalic polyester composite. The current composite can be used in marine applications, particularly the hull frame or body of the boat.

As the highest percentage of global mortality is caused by several cardiovascular diseases (CVD), maintenance and monitoring of a healthy cardiovascular condition have become the primary concern of each and every individual. Simultaneously, recent progress and advances in wearable pressure sensor technology have provided many pathways to monitor and detect underlying cardiovascular illness in terms of irregularities in heart rate, blood pressure, and blood oxygen saturation. These pressure sensors can be comfortably attached onto human skin or can be implanted on the surface of vascular grafts for uninterrupted monitoring of arterial blood pressure. While the traditional monitoring systems are time-consuming, expensive, and not user-friendly, flexible sensor technology has emerged as a promising and dynamic practice to collect important health information at a comparatively low cost in a reliable and user-friendly way. This Review explores the importance and necessity of cardiovascular health monitoring while emphasizing the role of flexible pressure sensors in monitoring patients' health conditions to avoid adverse effects. A comprehensive discussion on the current research progress along with the real-time impact and accessibility of pressure sensors developed for cardiovascular health monitoring applications has been provided.

High loadings of coarse alumina trihydrate (ATH), commercially used in polymers as a fire-retardant filler, cause uneven dispersion and reduce workability and affect physicomechanical properties. Better tensile properties can be achieved by uniform dispersion of nanosize ATH in polymers while maintaining its flame-retardant properties. Consequently, mechanical milling, being a sustainable approach towards the creation of nano-size materials, was carried out to reduce the particle size of coarse ATH in a high-energy planetary ball mill. Investigations were carried out to optimize the milling parameters such as time, rotational speed, milling media size and feed size. During milling, some of the physical properties of ATH change. The energy profile was studied to get the desired product properties. Nano-ATH within the PP matrix reduces the loadings with improvement in tensile and flexural strength. Hence, lightweight PP/nano-ATH composites for suitable use can be developed.

Improper handling of plastic waste and related chemical pollution has garnered much attention in recent years owing to the associated detrimental impacts on human health and the environment. This article reports an overview of the main interlinkages between persistent organic pollutants (POPs) and plastic in the waste management system of India. Both plastics and POPs share certain common traits such as persistence, resistance to biological degradation, and the ability to get transported over long distances. Throughout the processes of production, consumption, and disposal, plastics interact with and accumulate POPs through several mechanisms and end up co-existing in the environment. Plastic waste can undergo long-range transport through rivers and the oceans, break down into microplastics and get transported through the air, or remain locked in waste dump yards and landfills. Over time, environmental processes lead to the leaching and release of accumulated POPs from these plastic wastes. Plastic recycling in the Indian informal sector including smelting, scrubbing, and shredding of plastic waste, is also a potential major POPs source that demands further investigation. The presence of POPs in plastic waste and their fate in the plastic recycling process have not yet been elucidated. By enhancing our understanding of these processes, this paper may aid policy decisions to combat the release of POPs from different waste types and processes in India.

The present work studies the influence of zinc borate (ZB), magnesium hydroxide (MH) and ammonium polyphosphate (APP) as flame retardants on the curing, mechanical, thermal and flammability performances of Kevlar fibre (KF)-reinforced ethylene propylene diene monomer (EPDM) rubber composites. The flame retardant EPDM/KF composites were prepared with variable ratio of ZB, MH and APP. Thereafter, physicomechanical and thermal properties of the fire retardant EPDM/KF composites were analysed with density analysis, tensile testing, TGA analysis, SEM and cone calorimeter tests. The TGA analysis and cone calorimeter tests showed the enhancement in the flame retardant properties of the EPDM/KF composites with the addition of combined fillers with respect to the virgin counterparts. The synergistic effect of ZB and APP containing flame retardant-incorporated composites exhibited a prominence in the thermal stability and fire retardancy. Heat release rate (HRR) and total heat release rate (THR) of the ZB and APP combined fire retardant-incorporated composites were lower than the virgin EPDM.

Ostrinia nubilalis, a lepidopteran moth, also known as the European corn borer, has a major impact on the production of economically important crops in the United States and Europe. The female moth invites the male moth for mating through the release of pheromones, a volatile chemical signal. Pheromone binding proteins (PBPs) present in the male moth antennae are believed to pick up the pheromones, transport them across the aqueous sensillum lymph, and deliver them to the olfactory receptor neurons. Here we report for the first time the cloning, expression, refolding, purification, and structural characterization of Ostrinia nubilalis PBP3 (OnubPBP3). The recombinant protein showed nanomolar affinity to each isomer of the Ostrinia pheromones, E- and Z-11-tetradecenyl acetate. In a pH titration study by nuclear magnetic resonance, the protein exhibited an acid-induced unfolding at pH below 5.5. The molecular dynamics simulation study demonstrated ligand-induced conformational changes in the protein with both E- and Z-isomers of the Ostrinia pheromone. The simulation studies showed that while protein flexibility decreases upon binding to E-pheromone, it increases when bound to Z-pheromone. This finding suggests that the OnubPBP3 complex with E-pheromone is more stable than with Z-pheromone.

Ostrinia furnacalis is an invasive lepidopteran agricultural pest that relies on olfaction for mating and reproduction. Male moths have an extremely sensitive olfactory system that can detect the sex pheromones emitted by females over a great distance. Pheromone-binding proteins present in the male moth antenna play a key role in the pheromone uptake, transport, and release at the dendritic membrane of the olfactory neuron. Here, we report the first high-resolution NMR structure of a pheromone-binding protein from an Ostrinia species at pH 6.5. The core of the Ostrinia furnacalis PBP2 (OfurPBP2) consists of six helices, α1a (2-14), α1b (16-22), α2 (27-37), α3 (46-60), α4 (70-80), α5 (84-100), and α6 (107-124) surrounding a large hydrophobic pocket. The structure is stabilized by three disulfide bridges, 19-54, 50-108, and 97-117. In contrast to the unstructured C-terminus of other lepidopteran PBPs, the C-terminus of OfurPBP2 folds into an α-helix (α7) at pH 6.5. The protein has nanomolar affinity towards both pheromone isomers. Molecular docking of both pheromones, E-12 and Z-12-tetradecenyl acetate, to OfurPBP2 revealed that the residues Met5, Lys6, Met8, Thr9, Phe12, Phe36, Trp37, Phe76, Ser115, Phe118, Lys119, Ile122, His123, and Ala128 interact with both isomers, while Thr9 formed a hydrogen bond with the acetate head group. NMR structure and thermal unfolding studies with CD suggest that ligand release at pH 4.5 is likely due to the partial unfolding of the protein.

Alteration of the optical and photoelectrical properties of the photoanode materials are a prerequisite for improving the performance of dye-sensitized solar cell (DSSC). In this work, Ag-decorated cauliflower-like TiO2 photoanode was fabricated and studied the photovoltaic performance. The hierarchical structured TiO2 with abundant bundles exhibited a novel matrix for Ag deposition by the photoreduction technique. It is significant that the Ag nanoparticles showed a uniform size distribution on hierarchical structured TiO2 nanorods (HNRs). The plasmonic particle enfolded photoanode-based DSSC exhibited an efficiency of 4.15%, which is higher compared to the pristine TiO2 HNR (3.83%). The progress in the efficiency of plasmon particle-based DSSC is crucial, regarding the optical properties, and reduced charge transport resistance observed from the UV visible analysis (UV-Vis) and electrochemical impedance spectra (EIS).