Search

[Display omitted] Nonionic surfactant aerosols play a crucial role in many industries, but they can cause acute irritation to users' eyes during spraying. This cytotoxic process is associated with corneal cell necrosis causing cell membrane disruption. Industrial grade surfactants are typically polydisperse mixtures described by their nominal chemical structure but how the polydispersity affects their interactions with cell membrane, remains largely unexplored. A better understanding could benefit product formulations to maximise their efficiency whilst minimising their toxicity to the users. In this study, poly - oxyethylene glycol monododecyl ethers (C 12 E 4 , C 12 E 23) were used to form ideal binary surfactant mixtures. The cytotoxicities of mono and polydispersed surfactants towards human corneal epithelial cells were examined, followed by a series of biophysical characterisations of interactions between surfactants and model cell membranes. Notably, to probe the journey of individual C 12 E 4 and C 12 E 23 surfactant molecules across the cell membrane from a binary surfactant mixture, "two-colour" neutron reflection measurements were achieved via Hydrogen/Deuterium substitution. The relative distributions of C 12 E 4 and C 12 E 23 across cell membranes and their nanostructural conformations revealed a synergistic membrane-lytic ability initiated by surfactant mixing, with the more hydrophobic C 12 E 4 exhibiting stronger membrane binding potency than the hydrophilic C 12 E 23. The exact molar ratio of C 12 E 4 against C 12 E 23 in the mixture determined how the mixed surfactant interacted with the cell membrane, and how the process directly impacted cytotoxicity and eye irritation. Thus, the cytotoxicity of polydisperse surfactants is not the same as monodisperse surfactant of the same average structure. This work provides a useful basis for the assessment of surfactant mixing by balancing their efficiency and toxicity. [ABSTRACT FROM AUTHOR]

Abstract 3D printing technologies such as fused filament fabrication (FFF) offer great opportunities to enable the fabrication of complex geometries without access to a workshop or knowledge of machining. By adding filler materials to the raw filaments used for FFF, the material properties of the plastic can be adapted. With the addition of neutron absorbing particles, filaments can be created that enable 3D printing of neutron shielding with arbitrary geometry. Two materials for FFF are presented with different mixing ratios of hexagonal Boron nitride (h-BN) and Polylactic acid (PLA). BNPLA25 with 25 %wt h-BN and BNPLA35 with 35 %wt h-BN are compared to the commercially available Addbor N25 material. To qualify the applicability of BNPLA25 and BNPLA35 as shielding material for neutron instrumentation, such as neutron imaging, we investigated the overall neutron attenuation, the influence of non-optimized print settings, as well as characterized the incoherent neutron scattering and the microstructure using neutron imaging, and time-of-flight small-angle-neutron-scattering. Finally, the tensile strength of the material was determined in standardized tensile tests. The measured neutron attenuation shows excellent agreement with analytical calculations, thus validating both the material composition and the calculation method. Approximately 6 mm (8 mm) BNPLA35 are needed for $$1\times 10^{-3}$$ 1 × 10 - 3 transmission of a cold (thermal) neutron beam. Lack of extrusion due to suboptimal print settings can be compensated by increased thickness, clearly visible defects can be mitigated by 11–18% increase in thickness. Incoherent scattering is shown to be strongly reduced compared to pure PLA. The tensile strength of the material is shown not to be impacted by the h-BN filler. The good agreement between the measured attenuation and calculation, combined with the adoption of safety factor enables the quick and easy development as well as the performance estimation of shielding components. BNPLA is uniquely suited for 3D printing neutron shielding because of the combination of non-abrasive h-BN particles in standard PLA, which results in a filament that can be printed with almost any off-the-shelf printer and virtually no prior experience in 3D printing. This mitigates the slightly lower attenuation observed as compared to filaments containing $${\hbox {B}_{4}}\hbox {C}$$ B 4 C , which is highly abrasive and requires extensive additive manufacturing experience.

We have designed and realized a temperature and pressure controlled cell for Neutron Reflectometry (NR) and Small Angle Neutron Scattering (SANS) that is compatible with simultaneous optical transmission and resistivity measurements. The cell can accommodate samples up to 102 mm (4 inch) in diameter, can be pressurized from vacuum up to 10 bar gas pressure and the sample temperature can be controlled up to 350°C. The four single crystal quartz windows ensure both a good neutron and optical transmission and hence can be used in combination with in-situ optical transmission measurements. We present the cell and illustrate its performance with a series of neutron reflectometry experiments performed on Ta based thin films under a hydrogen containing atmosphere. [ABSTRACT FROM AUTHOR]

The structure of mRNA lipid nanoparticles (LNPs) is still under debate, with different studies presenting varying morphological characteristics, significantly hindering their biomedical potential. A typical formulation process of mRNA LNPs involves three steps: initial rapid mixing of lipids in an ethanol phase and mRNA in an acidic aqueous phase, followed by the swift removal of ethanol, and finally adjusting the solution to a neutral environment. In this study, we utilize Small Angle Neutron Scattering (SANS) with contrast matching to reveal the kinetic pathway-dependent of mRNA LNPs morphology. We find that the formulation process of the Moderna COVID-19 vaccine is controlled by a competition between aggregation and microphase separation, dictating the diverse morphologies observed in mRNA LNPs. The first step leads to the formation of polydisperse spherical droplets with an average diameter of 42±6.0 nm in an acidic ethanol aqueous solution. Ethanol removal initiates both aggregation and internal microphase separation, resulting in a polydisperse core-shell structure with an average diameter of 48±3.7 nm. Heptadecan-9-yl 8-((2-hydroxyethyl) (6-oxo-6-(undecyloxy) hexyl) amino) octanoate (SM-102) binds to mRNA via electrostatic interaction to form a reverse-wormlike micelle structure inside. The 1,2-Distearoyl-sn‑glycero-3-phosphocholine (DSPC) and PEG-lipid are just in the shell and cholesterol acting as a filler throughout the core-shell structure. Upon transitioning to a neutral environment, SM-102 loses its charge and neither the periphery nor the reverse-wormlike micelle can maintain their stabilities, leading to further aggregation and microphase separation. The average diameter of core-shell structure turns to be 66±5.2 nm. In the actual formulation process of the Moderna COVID-19 vaccine, steps 2 and 3 occur simultaneously, and the competition between aggregation and microphase separation determines the final morphology. These findings offer crucial insights into optimizing the morphology of mRNA LNPs, thereby facilitating advancements in vaccine development and mRNA vaccine delivery technologies.

[Display omitted] Colloidal suspensions of anisotropic particles are ubiquitous in particle-based industries. Consequently, there is a need to quantify the effects of particle shape on equilibrium phases and kinetic state transitions, particularly at lower aspect ratios (L / D ≈ 1–10). We present a new, colloidal system comprised of hollow, octadecyl-coated silica rods with 40 nm diameter with controlled aspect ratio and thermoreversible short-range attractions. Rheology and dynamic light scattering measurements on suspensions of these hollow adhesive hard rods with nominal aspect ratio ≈3 suspended in tetradecane exhibit thermoreversible gelation without complicating effects of gravitational settling. Small angle neutron scattering measurements of the microstructure are analyzed to determine the effective strength of attraction in the form of Baxter sticky parameter. Quantitative agreement is found with simulation predictions of the thermoreversible gel transition as a function of volume fraction, further validating a universal state diagram and providing guidance for the effects of aspect ratio on gelation. [ABSTRACT FROM AUTHOR]

The use of block copolymers to compatibilize immiscible plastics is an important strategy for upcycling municipal plastic wastes. Multiblock copolymers (MBCPs) have been proven to be more effective compatibilizers than di- and tri-block copolymers. Herein, we probe the interface structure of an effective multiblock copolymer compatibilizer and compare that with an ineffective triblock copolymer (TBCP). The interface activity of the compatibilizers is understood through a combination of small-angle neutron and x-ray scatterings (SANS and SAXS), by using deuterated homopolymer matrix and protonated compatibilizers. SANS analysis suggests that the MBCP forms a thicker interface layer (7-9 nm) than the TBCP (0-4 nm). In addition, SANS data seems to point to a stronger tendency for the MBCP to locate at the interface. Both factors contribute to its effectiveness at compatibilizing immiscible homopolymers. [ABSTRACT FROM AUTHOR]

The formation of distorted lamellar phases, distinguished by their arrangement of crumpled, stacked layers, is frequently accompanied by the disruption of long-range order, leading to the formation of interconnected network structures commonly observed in the sponge phase. Nevertheless, traditional scattering functions grounded in deterministic modeling fall short of fully representing these intricate structural characteristics. Our hypothesis posits that a deep learning method, in conjunction with the generalized leveled wave approach used for describing structural features of distorted lamellar phases, can quantitatively unveil the inherent spatial correlations within these phases. This report outlines a novel strategy that integrates convolutional neural networks and variational autoencoders, supported by stochastically generated density fluctuations, into a regression analysis framework for extracting structural features of distorted lamellar phases from small angle neutron scattering data. To evaluate the efficacy of our proposed approach, we conducted computational accuracy assessments and applied it to the analysis of experimentally measured small angle neutron scattering spectra of AOT surfactant solutions, a frequently studied lamellar system. The findings unambiguously demonstrate that deep learning provides a dependable and quantitative approach for investigating the morphology of wide variations of distorted lamellar phases. It is adaptable for deciphering structures from the lamellar to sponge phase including intermediate structures exhibiting fused topological features. This research highlights the effectiveness of deep learning methods in tackling complex issues in the field of soft matter structural analysis and beyond. [ABSTRACT FROM AUTHOR]

[Display omitted] Aqueous suspensions of cellulose nanocrystals (CNC) form a re-entrant liquid crystal (LC) phase with increasing salinity. Phase separation occurs in this LC state leading to a biphasic gel with a flow programmable structure that can be used to form anisotropic soft materials. We term this state a Liquid Crystal Hydroglass (LCH). Defining the mechanisms by which the LCH forms requires detailed structural analysis at the mesoscopic length scale. By utilising Small Angle Neutron Scattering (SANS), we investigated the microstructure transitions in CNC suspensions, with a particular focus on the unique LC re-entrancy and gelation into the biphasic LCH. Scattering from LCH gels comprises contributions from a dispersed liquid state and static heterogeneity, characterised using a Lorentzian-Gaussian model of inhomogeneity. This conceptually supports a gelation mechanism (spinodal decomposition) in CNC suspensions towards a biphasic structure of the LCH. It also demonstrates that, with increasing salinity, the non-monotonic variation in effective volume fraction of CNC rods fundamentally causes the LC re-entrancy. This work provides the first experimental characterisation of the LC-re-entrancy and formation of an anisotropic LCH gel. The proposed mechanism can be extended to understanding the general behaviour of anisotropic colloids. [ABSTRACT FROM AUTHOR]

The microstructure of wormlike micelles (WLM) directly affects the rheological properties of their solutions. Investigating the structure–property relationships of WLM has long been a popular topic for researchers who have developed theoretical and empirical models to describe their viscoelastic behavior. All these models rely on a collection of characteristic "length" parameters that are often difficult to estimate using relatively simple rheological tests. In particular, the micelle stiffness, as described by the persistence length, can be difficult to measure experimentally, while being very impactful on the bulk rheology of WLM solutions. Here, an array of inorganic salts (NaCl, LiCl, MgCl2, NaBr, NaI, and Na2SO4) have been used to induce wormlike micelle formation in an aqueous solution of the surfactant sodium lauryl ether sulfate. Ion dissociation/association with the surfactant head groups and the hydrogen bond network of the water alters the effective stiffness of the micelles, allowing for an estimation of the stiffness using three different methods: (1) small angle neutron scattering (SANS) measurements, (2) oscillatory rheological measurements, and (3) steady rheological measurements with a thermodynamic packing parameter model. Each of these methods are then compared and shown to be consistent with each other for the micelle solutions tested. The consistency of the results across all the measurements suggests that the approach used in this study, which estimates micelle parameters using steady shear rheology and a thermodynamic model, could provide a simpler and more accessible method for estimating micelle parameters in a wide range of surfactant systems. [ABSTRACT FROM AUTHOR]

Utilizing small angle neutron scattering techniques on organic shales, this study presents an innovative approach for characterizing the status of oil occurrence, and new insights into pore scale assessment through scattering vector-pore size relationship. The results indicate the successful identification of different shale oil occurrence status, before and after solvent extraction of residual oil for four shale samples with different contents of total organic carbon. In addition, coupled with density distribution analyses, the work demonstrates that shale samples with lower total organic carbon contents typically signify a smaller radius of gyration with better oil mobility, which indicates a greater wave oscillation with a larger pore size to be estimated from the scattering vector. This work also elucidates the notable scenarios of an increasing pore size could correspond to a decreasing radius of gyration caused by mass density redistribution. For polydisperse systems, this research illustrates the variations in pore volumetric ratio impact the scattering intensity, whereas pore scale changes affect the oscillation pattern. This novel research of analyzing mass density distribution and pore scale information in real space is also suitable for other porous media systems. [ABSTRACT FROM AUTHOR]

[Display omitted] The self-assembly structures and phase behaviour of phospholipids in protic ionic liquids (ILs) depend on intermolecular forces that can be controlled through changes in the size, polarity, and H-bond capacity of the solvent. The structure and temperature stability of the self-assembled phases formed by four phospholipids in three ILs was determined by a combination of small- and wide-angle X-ray scattering (SAXS and WAXS) and small-angle neutron scattering (SANS). The phospholipids have identical phosphocholine head groups but different alkyl tail lengths and saturations (DOPC, POPC, DPPC and DSPC), while the ILs' amphiphilicity, H–bond network density and polarity are varied between propylammonium nitrate (PAN) to ethylammonium nitrate (EAN) to ethanolammonium nitrate (EtAN). The observed structures and phase behaviour of the lipids becomes more surfactant–like with decreasing average solvent polarity, H-bond network density and surface tension. In PAN, all the investigated phospholipids behave like surfactants in water. In EAN they exhibit anomalous phase sequences and unexpected transitions as a function of temperature, while EtAN supports structures that share characteristics with water and EAN. Structures formed are also sensitive to proximity to the lipid chain melting temperature. [ABSTRACT FROM AUTHOR]

[Display omitted] Enveloped viruses are pivotal in causing various illnesses, including influenza and COVID-19. The antimicrobial peptide LL-37, a critical part of the human innate immune system, exhibits potential as an antiviral agent capable of thwarting these viral threats. Its mode of action involves versatile and non-specific interactions that culminate in dismantling the viral envelope, ultimately rendering the viruses inert. However, the exact mechanism of action is not yet understood. Here, the mechanism of LL-37 triggered changes in the structure and function of an enveloped virus is investigated. The bacteriophage "Phi6" is used as a surrogate for pathogenic enveloped viruses. Small angle X-ray and neutron scattering combined with light scattering techniques demonstrate that LL-37 actively integrates into the virus's lipid envelope. LL-37 addition to Phi6 leads to curvature modification in the lipid bilayer, ultimately separating the envelope from the nucleocapsid. Additional biological assays confirm the loss of virus infectivity in the presence of LL-37, which coincides with the structural transformations. The results provide a fundamental understanding of the structure-activity relationship related to enveloped viruses. The knowledge of peptide-virus interactions can guide the design of future peptide-based antiviral drugs and therapies. [ABSTRACT FROM AUTHOR]

In this work, the nanostructure of oxide dispersion-strengthened steels was studied by small-angle neutron scattering (SANS), transmission electron microscopy (TEM), and atom probe tomography (APT). The steels under study have different alloying systems differing in their contents of Cr, V, Ti, Al, and Zr. The methods of local analysis of TEM and APT revealed a significant number of nanosized oxide particles and clusters. Their sizes, number densities, and compositions were determined. A calculation of hardness from SANS data collected without an external magnetic field, or under a 1.1 T field, showed good agreement with the microhardness of the materials. The importance of taking into account two types of inclusions (oxides and clusters) and both nuclear and magnetic scattering was shown by the analysis of the scattering data. [ABSTRACT FROM AUTHOR]

Despite being the major cause of safety and performance issues in lithium metal batteries, experimental difficulties in quantifying directly the morphology of lithium deposited at electrode surfaces have meant that the mechanism of metallic lithium growth within batteries remains elusive. This study demonstrates that quantitative detail about the morphology of metallic lithium within batteries can be derived non‐destructively and directly using in situ ultra‐small and small‐angle neutron scattering. This information is obtained over a large electrode area in cells where lithium deposition processes are typical of real‐world applications. Complex variations of surface area and interfacial distances 1–10 µm and 100–300 nm are revealed in size that are influenced by current density and cell cycling history, providing valuable insight into the growth of metallic lithium features detrimental to battery performance. Such quantitative insight into the process of lithium growth is required for the development of safer high‐performance lithium metal batteries. [ABSTRACT FROM AUTHOR]

Magnetite and gallium substituted cuboferrites with a composition of GaxFe3−xO4 (0 ≤ x ≤ 1.4) were fabricated by thermal decomposition from acetylacetonate salts. The effect of Ga3+ cation substitution on the structural and thermomagnetic behavior of 4–12 nm sized core-shell particles was explored by X-ray and neutron diffraction, small angle neutron scattering, transmission electron microscopy, Mössbauer spectroscopy, and calorimetric measurements. Superparamagnetic (SPM) behavior and thermal capacity against increasing gallium concentration in nanoferrites were revealed. The highest heat capacity typical for Fe3O4@Ga0.6Fe2.4O4 and Ga0.6Fe2.4O4@Fe3O4 is accompanied by a slight stimulation of fibroblast culture growth and inhibition of HeLa cell growth. The observed effect is concentration dependent in the range of 0.01–0.1 mg/mL and particles of Ga0.6Fe2.4O4@Fe3O4 design have a greater effect on cells. Observed magnetic heat properties, as well as interactions with tumor and healthy cells, provide a basis for further biomedical research to use the proposed nanoparticle systems in cancer thermotherapy (magnetic hyperthermia). [ABSTRACT FROM AUTHOR]

Small‐Angle Scattering (SAS) techniques are essential tools for the characterization of catalysts before, during and after catalytic reactions. Either based on X‐Rays (SAXS) or neutrons (SANS), they provide unique structural information that helps to understand catalytic processes at the nanoscale level, allowing a rational improvement of the catalysts design. In this review, we present the key aspects involved in the use of these techniques in the catalysis field. Firstly, we introduce some of the fundamentals of the techniques and describe their main features and their impact in the catalyst design. Then, we analyze key examples of the use of SAS to study catalysts' structure through ex situ analysis, focusing on examples involving different porous materials and metallic nanoparticles. Afterwards, we discuss in situ and operando approaches for studying catalytical processes monitored using SAS. Finally, we present perspectives and challenges for the future use of SAS in the catalysis field. [ABSTRACT FROM AUTHOR]

[Display omitted] The forces that govern lipid self-assembly ionic liquids are similar to water, but their different balance can result in unexpected behaviour. The self-assembly behaviour and phase equilibria of two phospholipids, 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), in the most common protic ionic liquid, ethylammonium nitrate (EAN) have been investigated as function of composition and temperature by small- and wide-angle X-ray scattering (SAXS/WAXS) and small-angle neutron scattering (SANS). Both lipids form unusual self-assembly structures and show complex and unexpected phase behaviour unlike that seen in water; DSPC undergoes a gel L β to crystalline L c phase transition on warming, while POPC forms worm-like micelles L 1 upon dilution. This surprising phase behaviour is attributed to the large size of the EAN ions that solvate the lipid headgroup compared to water changing amphiphile packing. Weaker H-bonding between EAN and lipid headgroups also contributes. These results provide new insight for the design of lipid based nanostructured materials in ionic liquids with atypical properties. [ABSTRACT FROM AUTHOR]

Doping or alloying of the cations on the A-site and halides on the X site of ABX3 perovskites has been demonstrated as a successful technique for improving moisture stability of perovskite films for optoelectronic applications. Despite structural and electrical stability improvements, these films still undergo moisture induced degradation to Lead Iodide and other photo-inactive phases, reducing device lifetime and performance. Understanding of their moisture induced degradation has been limited by the contrast mechanisms and sensitivity of optical and x-ray scattering techniques. Time-of-Flight Grazing Incidence Small Angle Neutron Scattering (TOF-GISANS) presents itself as a powerful alternative capable of identifying low atomic weight phases and offering depth resolution. Herein we use TOF-GISANS to begin to uncover moisture induced degradation pathways in various mixed perovskite systems fabricated under ambient conditions and exposed to 90% rH in the dark for up to 12 h, showing poor stoichiometric homogeneity through the bulk of the film and facile formation of deuterated by-products at ambient temperatures. We find evidence indicative of formation of PbI2, and PbBr2 from peaks apparent in scattering from the surface of MAPbI3, FA0.83MA0.17Pb(I0.83Br0.17)3, and FA0.83Cs0.17Pb(I0.83Br0.17)3 thin films, with degradation less pronounced in the latter films containing Cs. Deuterated by-products form readily, resulting in decreasing average particle size as perovskite crystals swell and fragment from the grain periphery inwards. Cs0.05(FA0.83MA0.17)0.95Pb(I0.84Br0.16)3shows impressive phase resilience compared to the other mixtures, with minimal segregation to other phases observed in vertical cuts through the 2D scattering image, though still exhibits deleterious morphological degradation. TOF-GISANS is demonstrated as a powerful tool for characterisation of these materials, with significant potential for future investigations into phase changes in thin films.

Soil derived dissolved organic matter (DOM) is an important component of the carbon cycle and influences numerous biogeochemical processes, including the formation of mineral-organic associations. DOM ranges in size from small organic molecules to macromolecules and colloidal aggregates. In this study we have used small angle neutron (SANS) and X-ray (SAXS) scattering to characterize the colloidal DOM fraction from the organic layer of a boreal forest soil, and its interactions with hematite (α-Fe2O3) mineral nanoparticles. Comparison between SAXS and contrast variation SANS patterns revealed that the scattering form factor of the colloidal DOM aggregates was essentially independent of the scattering contrast, implying that the colloidal aggregates have an essentially homogeneous chemical composition, down to the nanometre length scale. Variation of the D2O/H2O ratio of the solvent yielded a SANS intensity minimum at ca. 40 ​vol % D2O, which was consistent with colloids composed of mainly polysaccharides. At pH 5.5 the pure hematite nanoparticles were colloidally stable in water and characterized by a ζ-potential of +25 ​mV and a hydrodynamic radius of ca. 70 ​nm. In the presence of DOM, the hematite nanoparticles lost the colloidal stability and aggregated into larger clusters, displaying a negative ζ-potential of ca. −25 ​mV. The charge reversal suggested that negatively charged polyanions of DOM adsorbed onto the hematite particles, possibly leading to bridging flocculation. Our results suggested that mainly low molecular weight components induced hematite aggregation because no or very limited interactions between DOM colloids and hematite were detected.

[Display omitted] The superchaotropic Keggin polyoxometalate α-SiW 12 O 40 4− (SiW) was recently shown to stabilize non-ionic surfactant (C 18:1 E 10) foams owing to electrostatic repulsion that arises from the adsorption of SiW-ions to the foam interfaces. The precise mechanism of foam stabilization by SiW however remained unsolved. Imaging and conductimetry were used on macroscopic foams to monitor the foam collapse under free drainage and small angle neutron scattering (SANS) at a given foam height allowed for the tracking of the evolution of film thickness under quasi-stationary conditions. Thin film pressure balance (TFPB) measurements enabled to quantify the resistance of single foam films to external pressure and to identify intra-film forces. At low SiW/surfactant ratios, the adsorption of SiW induces electrostatic repulsion within foam films. Above a concentration threshold corresponding to an adsorption saturation, excess of SiW screens the electrostatic repulsion that leads to thinner foam films. Despite screened electrostatics, the foam and single foam films remain very stable caused by an additional steric stabilizing force consistent with the presence of trapped micelles inside the foam films that bridge between the interfaces. These trapped micelles can serve as a surfactant reservoir, which promotes self-healing of the interface leading to much more resilient foam films in comparison to bare surfactant foams/films. [ABSTRACT FROM AUTHOR]

Here, we describe the behavior of mixtures of stearic acid (SA) and its hydroxylated counterpart 12-hydroxystearic acid (12-HSA) in aqueous mixtures at room temperature as a function of the 12-HSA/SA mole ratio R. The morphologies of the self-assembled aggregates are obtained through a multi-structural approach that combines confocal and cryo-TEM microscopies with small-angle neutron scattering (SANS) and wide-angle X-ray scattering (WAXS) measurements, coupled with rheology measurements. Fatty acids are solubilized by an excess of ethanolamine counterions, so that their heads are negatively charged. A clear trend towards partitioning between the two types of fatty acids is observed, presumably driven by the favorable formation of a H-bond network between hydroxyl OH function on the 12th carbon. For all R, the self-assembled structures are locally lamellar, with bilayers composed of crystallized and strongly interdigitated fatty acids. At high R, multilamellar tubes are formed. The doping via a low amount of SA molecules slightly modifies the dimensions of the tubes and decreases the bilayer rigidity. The solutions have a gel-like behavior. At intermediate R, tubes coexist in solution with helical ribbons. At low R, local partitioning also occurs, and the architecture of the self-assemblies associates the two morphologies of the pure fatty acids systems: they are faceted objects with planar domains enriched in SA molecules, capped with curved domains enriched in 12-HSA molecules. The rigidity of the bilayers is strongly increased, as well their storage modulus. The solutions remain, however, viscous fluids in this regime. [ABSTRACT FROM AUTHOR]

X‐ray diffraction and small‐angle neutron scattering were used to identify the naturally occurring hormone auxin in Madeira vine. Two kinds of auxins belonging to indole‐3‐acetic acid (IAA, C10H9NO2) and 4‐chloroindole‐3‐acetic acid (4‐Cl‐IAA, C10H8ClNO2) have been found. The appearance of well‐defined x‐ray diffraction peaks from the IAA as well as from the 4‐Cl‐IAA structures shows that the IAA and 4‐Cl‐IAA molecules that are produced at the shoot apex crystallize into periodic arrangements, rather than stay in molecular forms, upon transport downward through in stem. Small angle neutron scattering spectra reveal a progressive increase in the length of crystallized IAA and 4‐Cl‐IAA on transported downward from the shoot apex to the stem, reaching 59 nm in length in the area 8–9 cm below the shoot apex. A portion of IAA loses their carboxyl group COOH becoming inactive in stimulating cell growth, which slows down the growth in an aged stem. [ABSTRACT FROM AUTHOR]

Abstract An in situ autogenous particle‐reinforced Ti‐2.5Zr‐2Al‐1(Si,C) titanium alloy is prepared by vacuum induction melting. The wide range of an effective strain between 0.2 and 1.2 and the corresponding microstructure are obtained by the double‐cone high‐throughput compression test and finite element simulation. The deformation mechanism diagram with strains of 0.2–1.2 and strain rates of 0.7–1.5 s−1 at 900°C is constructed. When the strain rate is 1.3 s−1, dynamic recovery occurs in the small strain range (1.182), resulting in the deformation bands. High‐angle annular dark field and high‐resolution transmission electron microscopy are used to determine the existence of bimodal particle distribution, namely micron‐scale TiC particles and nano‐scale Ti5Si3 and (Zr, Si) particles. The average radius of the (Zr, Si) nanoparticles measured by small angle neutron scattering is 19.3 nm, and the volume fraction is 0.35%. DRX grains with an average size of 0.49 μm are obtained at 900°C, strain rate of 1.3 s−1, and strain of about 0.6. Micron‐scale particles stimulated DRX nucleation, while nanoscale particles hindered the growth of new grains, resulting in grain refinement.

Three mesogenic compounds: n-cyano-3-fluorophenyl 4-butylbenzoates (n = 4,6,8), abbreviated 4CFPB, 6CFPB, and 8CFPB contained in mesoporous Anodic Aluminium Oxide (AAO) membranes were subjected to Small Angle Neutron Scattering measurements with the aim to test the feasibility of SANS experiment as a means of detecting a boundary layer and estimating its thickness. This proved successful for 4CFB and 6CFPB in 18 nm pores, and indicative in 35 nm pores. The thickness of the boundary layer was estimated by core-shell SANS models at ca. 23–26 Å (2.3–2.6 nm). [ABSTRACT FROM AUTHOR]

In this work, the nanostructure of oxide dispersion-strengthened steels was studied by small-angle neutron scattering (SANS), transmission electron microscopy (TEM), and atom probe tomography (APT). The steels under study have different alloying systems differing in their contents of Cr, V, Ti, Al, and Zr. The methods of local analysis of TEM and APT revealed a significant number of nanosized oxide particles and clusters. Their sizes, number densities, and compositions were determined. A calculation of hardness from SANS data collected without an external magnetic field, or under a 1.1 T field, showed good agreement with the microhardness of the materials. The importance of taking into account two types of inclusions (oxides and clusters) and both nuclear and magnetic scattering was shown by the analysis of the scattering data.

The structure–property studies in unpolymerized and polymerized tannic acid incorporated hydrogels exhibited the presence of micron sized aggregates. The hydrogen bonded aggregates breaks at high temperatures for the unpolymerized and polymerized cases as evident from the scattering studies. The structural changes is clearly reflected in rheological properties for the unpolymerized case as a clear elastic to dissipative transition while the polymerized case exhibited dissipation even at higher temperatures. [Display omitted] Hydrogels made with semi-interpenetrating networks of the oligomerized polyphenol tannic acid, and poly(acrylamide), exhibit high stiffness and toughness. However, the structure property relationships that give rise to enhanced mechanical properties is not well understood. Herein, we systematically investigate the hydrogels using small angle X-ray scattering and small and Ultra-small angle neutron scattering within a wide length scale range (1 nm to 20 µm), polarized optical microscopy, and rheology. Small angle X-ray and neutron scattering reveal the presence of micron sized hydrogen bonded clusters in the hydrogels. Breaking of hydrogen bonded clusters above a critical solution temperature was clearly observed in the small angle neutron scattering data. Polarized optical microscopy show enhanced anisotropy for the gels with oligomerized tannic acid incorporated - when compared to gels with monomeric tannic acid. Rheological studies at varying temperatures nicely corroborate the structural changes observed at high temperatures and reveal a self-healing behavior of the gels. The knowledge gained from this study will aid in rational design of hydrogels for biomedical applications. [ABSTRACT FROM AUTHOR]

Copyright of Natural Gas & Oil is the property of Editorial Department of Natural Gas & Oil and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Amyloid-ß peptide interactions with model lipid membranes have been studied by means of small angle neutron scattering and molecular dynamics simulations. These interactions had been indicated recently as an origin of the membrane structure reorganizations between spherical small unilamellar vesicles and planar bicelle-like structures. In present work, we investigate the influence of charge on the peptide-triggered morphological changes by introducing the anionic lipid DMPS to the underlying DMPC membrane. Changes to the membrane thickness and the overall membrane structure with and without Aß25-35 incorporated have been investigated over a wide range of temperatures. Our results document the previously reported morphological reformations between bicelle-like structures present in gel phase and small unilamellar vesicles present in fluid phase to be independent from the charge existence in the system. [ABSTRACT FROM AUTHOR]

[Display omitted] Mixtures of hyaluronic acid (HA) with liposomes lead to hybrid colloid–polymer systems with a great interest in drug delivery. However, little is known about their microstructure. Small angle neutron scattering (SANS) is a valuable tool to characterize these systems in the semi-dilute entangled regime (1.5% HA) at high liposome concentration (80 mM lipids). The objective was to elucidate the influence of liposome surface (neutral, cationic, anionic or anionic PEGylated), drug encapsulation and HA concentration in a buffer mimicking biological fluids (37 °C). First, liposomes were characterized by SANS, cryo-electron microscopy, and dynamic light scattering and HA by SANS, size exclusion chromatography, and rheology. Secondly, HA-liposome mixtures were studied by SANS. In HA, liposomes kept their integrity. Anionic and PEGylated liposomes were in close contact within dense clusters with an amorphous organization. The center-to-center distance between liposomes corresponded to twice their diameter. A depletion mechanism could explain these findings. Encapsulation of a corticoid did not modify this organization. Cationic liposomes formed less dense aggregates and were better dispersed due to their complexation with HA. Liposome surface governed the interactions and microstructure of these hybrid systems. [ABSTRACT FROM AUTHOR]

This structural study exploits the possibility to use modular protein deuteration to facilitate the study of ubiquitin signalling, transfer, and modification. A protein conjugation reaction is used to combine protonated E2 enzyme with deuterated ubiquitin for small angle X-ray and neutron scattering with neutron contrast variation. The combined biomolecules stay as a monodisperse system during data collection in both protonated and deuterated buffers indicating long stability of the E2–Ub conjugate. With multiphase ab initio shape restoration and rigid body modelling, we reconstructed the shape of a E2–Ub-conjugated complex of UBE2D1 linked to ubiquitin via an isopeptide bond. Solution X-ray and neutron scattering data for this E2–Ub conjugate in the absence of E3 jointly indicate an ensemble of open and backbent states, with a preference for the latter in solution. The approach of combining protonated and labelled proteins can be used for solution studies to assess localization and movement of ubiquitin and could be widely applied to modular Ub systems in general. [ABSTRACT FROM AUTHOR]

Magnesium doped Amorphous Calcium Carbonate was synthesised from precursor solutions containing varying amounts of calcium, magnesium, H2O and D2O. The Mg/Ca ratio in the resultant Amorphous Calcium Carbonate was found to vary linearly with the Mg/Ca ratio in the precursor solution. All samples crystallised as aragonite. No Mg was found in the final aragonite crystals. Changes in the Mg to Ca ratio were found to only marginally effect nucleation rates but strongly effect crystal growth rates. These results are consistent with a dissolution-reprecipitation model for aragonite formation via an Amorphous Calcium Carbonate intermediate. [ABSTRACT FROM AUTHOR]

[Display omitted] Hypothesis: Saponins are a class of plant derived surfactants which are widely used in food related foams and emulsions, aerated drinks, and in pharmaceuticals and cosmetics. As a potential biosourced and renewable ingredient in a wider range of surfactant based formulations their potential is intimately associated with their mixing with synthetic surfactants. As such the nature of the mixed saponin-surfactant self-assembly is an important characteristic to investigate and understand. The unconventional structure of the saponins compared to the conventional synthetic surfactants poses some interesting constraints on the structures of the mixed aggregates. Experiments: Small angle neutron scattering, SANS, is used to investigate the structure of the saponin, escin, mixed with a range of nonionic surfactants with different ethylene oxide groups, from triethylene glycol monododecyl ether, C 12 E 3 , to dodecaethylene glycol monododecyl ether, C 12 E 12. Findings: The scattering data reveal a complex evolution in the solution self-assembled structure with varying escin / nonionic composition and ethylene oxide chain length. The rich structural development comprises of the evolution from the elongated micelle structure of escin to the micelle structure of the nonionic surfactant. At the intermediate solution compositions the structure is predominantly planar, comprising mostly of planar / micellar mixed phases. The nature of the planar structures depend upon the ethylene oxide chain length and the solution composition, and include lamellar, bilamellar vesicle, multilamellar vesicle, and nanovesicle structures, in common with what is observed in other surfactant mixtures. [ABSTRACT FROM AUTHOR]

Hypothesis: Nanoscale characterisation of the self-associated species formed by amphiphilic pharmaceuticals in aqueous solution carries relevance across their entire journey from development through to manufacture - relevant, therefore, not only as regards formulation of the drug products as medicines, but also potentially relevant to their bioavailability, activity, and clinical side effects. Such knowledge and understanding, however, can only be fully secured by applying a range of experimental and theoretical methodologies., Experiments: Herein, we apply a synergistic combination of solubility, surface tension, SANS, NMR and UV spectroscopic studies, together with MD simulation and QM calculations, to investigate the meso-structures of propranolol hydrochloride aggregates in bulk aqueous solutions, at concentrations spanning 2.5 mM to > 200 mM. In addition, we explore the effects of adding NaCl to mimic the ionic strength of physiological fluids, and the differences between racemate and single enantiomer., Findings: There is a continuum of particle sizes shown to exist across the entire concentration range, with molecules joining and leaving on the nanosecond timescale, and with the distributions of aggregate sizes varying with drug and salt concentration. Given that propranolol is a highly prescribed (WHO essential) medicine, disfavouring aggregators from consideration in high-throughput screening for potential new drug candidates - as many have advocated - should thus be done cautiously., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Crown Copyright © 2024. Published by Elsevier Inc. All rights reserved.)

This study describes thermo‐rheological properties of branched copolymer surfactants (BCSs) stabilizing oil‐in‐water emulsions to generate materials exhibiting temperature‐dependent gelation with the ability to solubilize a broad range of molecules. Four poly(N‐isopropylacrylamide‐ran‐poly(ethylene glycol) methacrylate) (poly(NIPAM‐ran‐PEGMA)) BCSs with varying molecular weight (Mn), 4.7; 7.0; 7.8 and 9.0 kg mol−1, are investigated via oscillatory shear rheology, small angle neutron scattering (SANS), and neutron reflectivity (NR). Rheological thermoscans show that emulsions stabilized by the BCS with the lowest Mn (4.7 kg mol−1) are thermo‐thinning, while with the other BCSs the emulsions display a thermo‐thickening behavior. Emulsions stabilized with the BCS with Mn = 7.8 kg mol−1 form gels within a precise temperature window depending on BCS concentration. Small angle neutron scattering data analysis suggests that the BCS is present in two forms in equilibrium, small aggregates dispersed in the bulk water and an adsorbed polymeric layer at the oil/water interface. Changes in dimensions of these structures with temperature correlate with the macroscopic thermo‐thinning/thermo‐thickening behavior observed. Neutron reflectivity is conducted at the oil/water interface to allow further elucidation of BCS behavior in these systems. [ABSTRACT FROM AUTHOR]

The effect of thermosonication (TS) (90 °C, 10–30 min) on the fibrillisation of faba bean protein isolate (FPI) was studied. The self-assembly behaviour, microstructural characteristics and techno-functional (gelation and emulsification) properties of FPI fibrils obtained from TS treatment were compared with those obtained from conventional prolonged heating (CH) at 90 °C up to 8 h. Compared to CH treatment, TS treatment was shown to significantly accelerate the formation of FPI fibrils with prominent β-sheet structures as revealed by Thioflavin T (ThT) fluorescence, Fourier-transform infrared spectroscopy (FTIR) and circular dichroism (CD). The characteristics of fibril building blocks were analysed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and liquid chromatography linked to tandem mass spectrometry (LC-MS/MS) to obtain the differences between TS and CH induced fibrillisation of FPI. Transmission electron microscopy (TEM) and small-angle neutron scattering (SANS) showed that 4 h CH and 10 min TS treatments resulted in the fibrils with similar radius (from 5 to 10 nm). Furthermore, SANS indicated that TS treatment induced the formation of an entangled FPI fibrillar network, which could lead to the observed viscoelastic properties of FPI at a high concentration (10 wt%). Finally, high internal phase O/W emulsions (HIPE, φ = 0.75) stabilised by 30 min TS induced FPI fibrils (3 wt%) demonstrated a stronger gel strength and smaller oil droplet size compared to those prepared with untreated FPI, suggesting a superior emulsification capability of FPI fibrils. This finding demonstrates that TS treatment is a promising and efficient method for fibrillisation of plant proteins with the resultant fibrils generating excellent gelation and emulsification properties. [Display omitted] • Thermosonication (TS) accelerates formation of faba bean protein (FPI) fibrils. • TS could form FPI fibrils with dominated β-sheet protein secondary structures. • FPI fibrils formed entangled network showing thermoreversible gelation behaviour. • FPI fibrils are superior in stabilization O/W high internal phase emulsions. [ABSTRACT FROM AUTHOR]

Here, we describe the behavior of mixtures of stearic acid (SA) and its hydroxylated counterpart 12-hydroxystearic acid (12-HSA) in aqueous mixtures at room temperature as a function of the 12-HSA/SA mole ratio R. The morphologies of the self-assembled aggregates are obtained through a multi-structural approach that combines confocal and cryo-TEM microscopies with small-angle neutron scattering (SANS) and wide-angle X-ray scattering (WAXS) measurements, coupled with rheology measurements. Fatty acids are solubilized by an excess of ethanolamine counterions, so that their heads are negatively charged. A clear trend towards partitioning between the two types of fatty acids is observed, presumably driven by the favorable formation of a H-bond network between hydroxyl OH function on the 12th carbon. For all R, the self-assembled structures are locally lamellar, with bilayers composed of crystallized and strongly interdigitated fatty acids. At high R, multilamellar tubes are formed. The doping via a low amount of SA molecules slightly modifies the dimensions of the tubes and decreases the bilayer rigidity. The solutions have a gel-like behavior. At intermediate R, tubes coexist in solution with helical ribbons. At low R, local partitioning also occurs, and the architecture of the self-assemblies associates the two morphologies of the pure fatty acids systems: they are faceted objects with planar domains enriched in SA molecules, capped with curved domains enriched in 12-HSA molecules. The rigidity of the bilayers is strongly increased, as well their storage modulus. The solutions remain, however, viscous fluids in this regime.

Studies in spin dynamics of disordered media and multiple ultra-small angle neutron scattering are considered. The experiments were carried out on unique installations designed in ITEP laboratory of neutron physics: beta-NMR spectrometer and universal neutron diffractometer. The main attention is paid to random walks in disordered systems and ultra-small angle neutron scattering (USANS) on objects with space correlations in positions of scatterers. Synthesis of concentration expansion, semi-phenomenological theory and numerical simulations produced satisfactory description of the nuclear polarization transfer within disordered 8Li–6Li spin subsystem in LiF single crystal. The theory of USANS starts from eikonal approximation for the scattering amplitude, which (a) reproduces the phenomenological Moliere–Bethe theory for the observable neutron angular distributions for uncorrelated random positions of scatterers, and (b) gives a possibility to take into account their spatial correlations. [ABSTRACT FROM AUTHOR]

Lipid structural diversity strongly affects biomembrane chemico-physical and structural properties in addition to membrane-associated events. At high concentrations, cholesterol increases membrane order and rigidity, while polyunsaturated lipids are reported to increase disorder and flexibility. How these different tendencies balance in composite bilayers is still controversial. In this study, electron paramagnetic resonance spectroscopy, small angle neutron scattering, and neutron reflectivity were used to investigate the structural properties of cholesterol-containing lipid bilayers in the fluid state with increasing amounts of polyunsaturated omega-3 lipids. Either the hybrid 1-stearoyl-2-docosahexaenoyl-sn-glycero-3-phosphocholine or the symmetric 1,2-docosahexaenoyl-sn-glycero-3-phosphocholine were added to the mixture of the naturally abundant 1-palmitoyl-2-oleyl-sn-glycero-3-phosphocholine and cholesterol. Our results indicate that the hybrid and the symmetric omega-3 phospholipids affect the microscopic organization of lipid bilayers differently. Cholesterol does not segregate from polyunsaturated phospholipids and, through interactions with them, is able to suppress the formation of non-lamellar structures induced by the symmetric polyunsaturated lipid. However, this order/disorder balance leads to a bilayer whose structural organization cannot be ascribed to either a liquid ordered or to a canonical liquid disordered phase, in that it displays a very loose packing of the intermediate segments of lipid chains. [ABSTRACT FROM AUTHOR]

In this article we present the first experimental evidence confirming a global presence of Buckminsterfullerene (C 60) in non-graphitizing polymeric carbon, along with its volume fraction calculations. Partially stacked carbon fragments featuring weak or strong curvatures constitute the structural units in non-graphitizing carbons. It has been proposed that a certain fraction of completely closed spherical fullerenes, such as C 60 , is also present in these materials. Strongly curved structures are not expected to exist in graphitizing carbons. We report on a Small Angle Neutron Scattering (SANS) investigation conducted at the Institut Laue-Langevin, Grenoble, France, that enables us to (i) quantify C 60 in a non-graphitizing carbon, (ii) investigate the evolution patterns of graphitizing and non-graphitizing carbons, and (iii) perform a detailed SANS analysis of pure crystalline C 60 in dry powder form. We also revisit the formation patterns of slightly larger structures (3–5 nm) such as graphitic crystallites and voids in both classes of polymeric carbon. These results provide a strong evidence in support of the fullerene-like microstructural models of non-graphitizing carbon, adding that the curved structural units are not just "fullerene-like", but also spherical fullerenes, C 60 in particular. [Display omitted] • Non-graphitizing carbons contain spherical fullerenes in addition to curved fragments. • Volume fraction of C 60 in carbon derived from a phenol-formaldehyde resin is ∼7%. • Graphitizing carbons do not contain spherical and closed fullerenes. [ABSTRACT FROM AUTHOR]

In high resolution neutron scattering experimental work the use of significantly longer incoming neutron wavelengths compared to the currently widely used cold neutron range can be of significant advantage. Such advantages are to obtain higher data rates at equal resolution conditions, for example in small angle neutron scattering, and to obtain far better resolution, e.g., in neutron spin echo and time-of-flight spectroscopy or both. [ABSTRACT FROM AUTHOR]

Controlling the nanomorphology in bulk heterojunction photoactive blends is crucial for optimizing the performance and stability of organic photovoltaic (OPV) technologies. A promising approach is to alter the drying dynamics and consequently, the nanostructure of the blend film using solvent additives such as 1,8-diiodooctane (DIO). Although this approach is demonstrated extensively for OPV systems incorporating fullerene-based acceptors, it is unclear how solvent additive processing influences the morphology and stability of nonfullerene acceptor (NFA) systems. Here, small angle neutron scattering (SANS) is used to probe the nanomorphology of two model OPV systems processed with DIO: a fullerene-based system (PBDB-T:PC 71 BM) and an NFA-based system (PBDB-T:ITIC). To overcome the low intrinsic neutron scattering length density contrast in polymer:NFA blend films, the synthesis of a deuterated NFA analog (ITIC-d 52 ) is reported. Using SANS, new insights into the nanoscale evolution of fullerene and NFA-based systems are provided by characterizing films immediately after fabrication, after thermal annealing, and after aging for 1 year. It is found that DIO processing influences fullerene and NFA-based systems differently with NFA-based systems characterized by more phase-separated domains. After long-term aging, SANS reveals both systems demonstrate some level of thermodynamic induced domain coarsening., (© 2024 The Authors. Small published by Wiley‐VCH GmbH.)