Search

We provide experimental evidence that is inconsistent with often proposed Langmuir-Hinshelwood (LH) mechanistic hypotheses for water-promoted CO oxidation over Au-Fe2O3. Passing CO and H2O, but no O-2, over Au-gamma-Fe2O3 at 25 degrees C, we observe significant CO2 production, inconsistent with LH mechanistic hypotheses. Experiments with (H2O)-O-18 further show that previous LH mechanistic proposals cannot account for water-promoted CO oxidation over Au-gamma-Fe2O3. Guided by density functional theory, we instead postulate a water-promoted Mars-van Krevelen (w-MvK) reaction. Our proposed w-MvK mechanism is consistent both with observed CO2 production in the absence of O-2 and with CO oxidation in the presence of (H2O)-O-18 and O-16(2). In contrast, for Au-TiO2, our data is consistent with previous LH mechanistic hypotheses., Funding: WISE [2016.0042]; VR [2013.8823, 2017.00559, 2019-05114, WISE-ap1]

This mini-review focuses on up-to-date advances of hybrid materials consisting of organic and inorganic components and their applications in different chemical processes. The purpose of forming such hybrids is mainly to functionalize and stabilize inorganic supports by attaching an organic linker to enhance their performance towards a target application. The interface chemistry is present with the emphasis on the sustainability of their components, chemical changes in substrates during synthesis, improvements of their physical and chemical properties, and, finally, their implementation. The latter is the main sectioning feature of this review, while we present the most prosperous applications ranging from catalysis, through water purification and energy storage. Emphasis was given to materials that can be classified as green to the best in our consideration. As the summary, the current situation on developing hybrid materials as well as directions towards sustainable future using organic-inorganic hybrids are presented.

Spent sulfite liquor, a side-stream from the pulp and paper industry, is an abundantly available carbon source for bio-based platform chemicals. The biotechnological valorization of side streams in biorefineries is hampered by the inability of many microorganisms to metabolize and deal with aldonic acids. Based on the principles of Green Chemistry, the electrochemical reduction of aldonic acids into the corresponding biomass sugars appears as a prospective process for the conversion of these acids into fermentable carbohydrates. In our paper, the investigation of electrochemical reduction of gluconic and xylonic acids into glucose and xylose, respectively, is presented. The proposed mechanism on a gold-coated silver electrode was determined via ReaxFF molecular dynamics simulations and quantum chemistry calculations. Model solutions with an aldonic acid concentration of 2.5 wt % were used for the experiments. Compared to a two-electrode compartment cell, the amounts of glucose and xylose produced in the undivided cell were more than 4 and 5.5 times higher, respectively. The electrode surface was analyzed by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. Despite the relatively low conversion rate, our results show that electrochemical reduction of aldonic acids into their corresponding aldoses in model solutions is possible, which represents an important step toward side-stream valorization.

The immobilization and structural analysis of platinum nanoparticles on a nitrogen-rich, bipyridine-containing covalent triazine framework (bpyCTF) having structural defects are disclosed by taking advantage of 15N solid-state nuclear magnetic resonance measurements at natural 15N isotope abundance and X-ray photoelectron spectroscopic analyses. The photocatalyst (Pt@bpyCTF) with structural defects reduces CO2 to formic acid (FA) at a rate of 152 µmol h−1g−1 and a selectivity higher than 95% over CO and H2 in water under simulated solar light. The presence of amine defects and the immobilization of Pt cause improvement in the photocurrent density and CO2 capture capacity (≈8% by weight) despite the moderate surface area (0.54 cm3 g−1)of the photocatalyst. Theoretical models and density functional theory calculations are employed to investigate the possible CO2 reduction reaction (CO2RR) mechanisms. Considering the exceptional CO2 capture capacity and high FA production using only CO2-bubbled water, this work highlights the great potential of nitrogen-rich CTFs for photocatalyzed CO2RRs under green conditions.

The instability of molecular electrodes under oxidative/reductive conditions and insufficient understanding of the metal oxide-based systems have slowed down the progress of H2-based fuels. Efficient regeneration of the electrode's performance after prolonged use is another bottleneck of this research. This work represents the first example of a bifunctional and electrochemically regenerable molecular electrode which can be used for the unperturbed production of H2 from water. Pyridyl linkers with flexible arms (–CH2–CH2–) on modified fluorine-doped carbon cloth (FCC) were used to anchor a highly active ruthenium electrocatalyst [RuII(mcbp)(H2O)2] (1) [mcbp2− = 2,6-bis(1-methyl-4-(carboxylate)benzimidazol-2-yl)pyridine]. The pyridine unit of the linker replaces one of the water molecules of 1, which resulted in RuPFCC (ruthenium electrocatalyst anchored on –CH2–CH2–pyridine modified FCC), a high-performing electrode for oxygen evolution reaction [OER, overpotential of ∼215 mV] as well as hydrogen evolution reaction (HER, overpotential of ∼330 mV) at pH 7. A current density of ∼8 mA cm−2 at 2.06 V (vs. RHE) and ∼−6 mA cm−2 at −0.84 V (vs. RHE) with only 0.04 wt% loading of ruthenium was obtained. OER turnover of >7.4 × 103 at 1.81 V in 48 h and HER turnover of >3.6 × 103 at −0.79 V in 3 h were calculated. The activity of the OER anode after 48 h use could be electrochemically regenerated to ∼98% of its original activity while it serves as a HE cathode (evolving hydrogen) for 8 h. This electrode design can also be used for developing ultra-stable molecular electrodes with exciting electrochemical regeneration features, for other proton-dependent electrochemical processes.

Photoluminescent carbon nanoparticles (CNPs), such as carbon dots (CDs), have attracted much attention owing to a unique set of properties, like high and tunable fluorescence. In this way, the use of carbon-rich lignin has been demonstrated to be a sustainable approach to producing a broad range of photoluminescent CNPs. However, the valorization of this complex polyphenol is limited when it comes to green and efficient ways of conversion. In addition, the existing solvothermal approaches using lignin often result in CDs with low photoluminescence, while flammable and/or toxic solvents are employed. Here, we depolymerized technical lignins, i.e. kraft and soda, through electroreductive cleavage in two different sustainable media: deep eutectic solvent and levulinic acid. After depolymerization, lignin-derived monomers were generated, with a predominance of aryl ether and phenolic groups, which were further combined with 1,2-Phenylenediamine to produce N-doped CNPs in a solvent-free approach. Photoluminescent CNPs with varied sizes were generated (5–50 nm), which presented a wide photoluminescence emission, from blue to red, depending on solvent polarity. These results demonstrate a feasible and sustainable route for the solvent-free synthesis of photoluminescent CNPs using lignin-derived monomers as carbon source, which may find applications in a wide range of fields.

Lignin has been, for a long time, treated as a low-value waste product. To change this scenario, high-value applications have been recently pursued, e.g., the preparation of hybrid materials with inorganic components. Although hybrid inorganic-based materials can benefit from the reactive lignin phenolic groups at the interface, often responsible for optimizing specific properties, this is still an underexplored field. Here, we present a novel and green material based on the combination of hydroxymethylated lignin nanoparticles (HLNPs) with molybdenum disulfide (MoS2) nanoflowers grown via a hydrothermal route. By bringing together the lubricant performance of MoS2 and the structural stability of biomass-based nanoparticles, a MoS2-HLNPs hybrid is presented as a bio-derived additive for superior tribological performances. While FT-IR analysis confirmed the structural stability of lignin after the hydrothermal growth of MoS2, TEM and SEM micrographs revealed a homogeneous distribution of MoS2 nanoflowers (average size of 400 nm) on the HLNPs (average size of 100 nm). Regarding the tribological tests, considering a pure oil as reference, only HLNPs as bio-derived additives led to a reduction in the wear volume of 18%. However, the hybrid of MoS2-HLNPs led to a considerably higher reduction (71%), pointing out its superior performance. These results open a new window of opportunity for a versatile and yet underexplored field that can pave the way for a new class of biobased lubricants.