Search

Reprocessing nuclear-spent fuels is highly demanded for enhanced resource efficacy and removal of the associated radiotoxicity.

Even though, pyroprocessing is considered as a suitable technique for metal fuel processing, attempts are being made in our laboratory to develop a solvent extraction based process as an interim method. Since, the metallic fuels contain considerable amount of Pu(IV) and Zr(IV), the use of conventional extractant tri-n-butyl phosphate (TBP) for reprocessing may pose problems due to third phase formation. In the exploration for the identification of an alternate extractant in the organophosphate family, tris(2-methylbutyl) phosphate (T2MBP), a branched isomer of tri-n-amyl phosphate (TAP) was found to be a potential extractant for nuclear fuel reprocessing. In this context, batch wise extraction and stripping studies with a feed solution containing U(VI) and 6 wt% Zr(IV) were carried out with unirradiated and irradiated 1.1 M solution of T2MBP in n-dodecane (n-DD) and the results were compared with corresponding solutions of TBP and TAP in n-DD. Among all these systems under identical conditions, third phase formation was observed only in the case of irradiated TBP system which makes U–Zr fuel reprocessing difficult using TBP as the extractant. Furthermore, studies have also been carried out with U–Pu–Zr feed solution to understand the extraction and stripping behaviour of these extractants. The stage wise and cumulative percentage of extraction and stripping for each metal ion of these systems were evaluated. Overall, these batch studies indicated that, T2MBP system has comparable extraction and stripping behaviour with U–Zr and U–Pu–Zr feed solutions and T2MBP exhibits better separation factor than TBP.

The electronic structure and complexation behavior of methyl-substituted phosphinic acids with U(VI) and Pu(IV) were explored by applying quantum chemical methods. In contrast to Ingold's classification, our results indicate that the methyl group is electron-withdrawing, reducing the phosphoryl group electron density in substituted phosphinic acids. The magnitude of the computed complexation energy values increases along with the series, PA → MPA → DMPA, and MP → MMP → MDMP, implying an increasing complexation tendency upon methyl group substitution for both U(VI) and Pu(IV) complexes. One of the nitrate groups in UO

Four MOF-LIC-1 MOFs following the PSM strategy were prepared, characterized, and examined for the sorption of U(vi) and Th(iv). Also the nature of U(vi) interactions on MOFs was also investigated by applying DFT calculations.

Deep eutectic solvents (DESs) based on metal halide salts are highly catalytic, low toxic, reusable, cost-effective, and have higher thermal stability than their analogue ionic liquids (ILs). In this work, we have reported the formation mechanism of metal salt-based DESs at the molecular level along with their charge-transfer analysis and thermodynamics associated with their formation using density functional theory. The DES systems analyzed in the present work were choline chloride and tin(II)chloride (DES1) and choline chloride and zinc(II)chloride (DES2), both in a molar ratio of 1:2, respectively. An excellent correlation is obtained between the theoretically calculated IR spectra of the DES systems and the previously reported experimental findings for the formation of the complex systems. The DESs were found to be stable systems due to traditional hydrogen bonding and electrostatic interactions resulting in the ionic species [Sn2Cl5]- and [Zn2Cl5]- and are elucidated with the help of electronic structure calculations. CHELPG partial charge analysis and natural bond orbital analysis suggest a charge transfer from Cl- (chloride) to Ch+ (choline) and metal salts in the DES structures. The atom-in-molecules and noncovalent interaction (NCI) analysis suggest a strong electrostatic interaction within the DES2 system as compared to DES1. Higher stability and reactivity are observed in the DES2 system based on the frontier molecular orbital analysis. Our analysis offers important insights into the formation mechanism of these economic IL analogues.

Hexapropyl phosphoramide (HPPA) and hexabutyl phosphoramide (HBPA) were examined for the macrolevel extraction and stripping of tetravalent metal ions such as Pu(IV) and Th(IV). The solvation number of Pu(IV) with both the phosphoramides were measured. The number of stages was evaluated for the quantitative extraction and stripping of Pu(IV) and Th(IV) in cross-current mode with 1.1 M phosphoramides in xylene from the nitric acid medium. The distribution ratios for the extraction of Th(IV) were measured with 1.1 M phosphoramides in xylene as a function of equilibrium aqueous phase Th(IV) and nitric acid concentration. In addition, distribution ratios for the extraction of fission product elements such as Zr, Tc, Ru, lanthanides (La, Pr, Nd and Gd) and activation product Am were also measured with 1.1 M HPPA and HBPA in n-Dodecane (n-DD) system as a function of aqueous phase nitric acid concentration. The extraction data generated with phosphoramides were compared with a 1.1 M TBP/n-DD system.

The electronic structure of ligands with phosphoryl and carbonyl binding sites and their complexation behavior with uranyl nitrate were investigated using density functional theory (DFT). The quantum chemical calculations indicate that the electronic charges on both phosphoryl and carbonyl groups are more polarized toward oxygen atoms in isolated ligands. This effect is predominant in the case of complexes of the former. Both P═O and C═O groups are positively charged with the exception in methylisobutylketone (MIBK), where the C=O group is virtually neutral. The fragment molecular orbital analysis suggests that during complexation, a certain amount of charge transfer occurs from the filled pπ-orbitals [π

This work reports a unique ZrO

The solubility of phenylphosphinic acid (PPA) was measured for the first time in supercritical carbon dioxide (SCCO2) at 313, 323, and 333 K with pressure ranging from 10–20 MPa using a dynamic flo...

The possibility of a multifunctional and reversible solid-state colorimetric sensor is described for the identification and quantification of ultra-trace Cd2+ and Hg2+ ions, using a honeycomb-structured mesoporous silica monolith conjoined with an indigenous chromoionophoric probe, i.e., 4-hexyl-6-((5-mercapto-1,3,4-thiadiazol-2-yl)diazenyl)benzene-1,3-diol (HMTAR). The amphiphilic probe is characterized using NMR, FT-IR, HR-MS, and CHNS elemental analysis. The structural and surface properties of the monolithic template have been characterized using p-XRD, XPS, TEM-SAED, SEM-EDAX, FT-IR, TG-DTA, and N2 isotherm analysis. The unique structural features and distinct analytical properties of the solid-state sensor proffer a strong response in selectively signaling the target analytes. The probe (HMTAR) exhibits a 1:1 stoichiometric binding ratio with the target ions (Cd2+ & Hg2+), with a visual color change from pale orange to dark red for Cd2+ (525 nm, λmax), and to purple for Hg2+ (530 nm, λmax), respectively, in the pH range 7.0–8.0. The influence of various analytical criteria such as pH, temperature, response kinetics, critical probe concentration, sensor quantity, matrix tolerance, linear response range, reusability, the limit of detection (LOD), and quantification (LOQ) has been investigated to validate the sensor performance. The proposed method displays a linear signal response in the concentration range 5–100 μg/L, with a LOD value of 2.67 and 2.90 μg/L, for Cd2+ and Hg2+, respectively. The real-world efficacy of the sensor material has been tested with real and synthetic water samples with a significant recovery value of ≥ 99.2%, to authenticate its data reliability and reproducibility (RSD ≤ 3.53%).

The possibility of a multifunctional and reversible solid-state colorimetric sensor is described for the identification and quantification of ultra-trace Cd

In this work, we manifested a new approach in designing solid-state colorimetric sensors for the selective optical sensing of As3+. The sensor fabrication is modulated using, (i) a cubic mesopores of ordered silica monolith, and (ii) a bimodal macro-/meso-porous polymer monolith, as hosting templates that are immobilized with a tailor-made chromoionophoric probe (DFBEP). The surface morphology and structural dimensions of the monolith templates and the sensor materials are characterized using p-XRD, XPS, FE-SEM-EDAX, HR-TEM-SAED, FT-IR, TGA, and BET/BJH analysis. The sensing components such as pH, probe content, sensor dosage, kinetics, temperature, analyte concentration, linear response range, selectivity, and sensitivity are optimized to arrive at the best sensing conditions. The silica and polymer-based monolithic sensors show a linear spectral response in the concentration range of 2–300 and 2–200 ppb, with a detection limit of 0.87 and 0.75 ppb for As3+, respectively. The real-time ion-monitoring propensity of the sensors is tested with spiked synthetic and real water samples, with a recovery efficiency of ≥99.1% (RSD ≤1.57%). The sensors act as both naked-eye optical sensors and preconcentrators, with a response time of ≤2.5 min. The molecular and photophysical properties of the DFBEP-As3+ complex are studied by TD-DFT calculations, using the B3LYP/6–31G (d,p) method.

The effect of alkyl chain length on the basicity of phosphoryl oxygen in phosphate ligands is investigated in the present study. In all ligands except PH3O, a negative hyperconjugation interaction has been observed resulting from the interaction between the filled π (P O) and σ*(PR) orbitals. This hyperconjugation interaction reduces the phosphoryl group’s electron density and is found identical in all ligands. The NBO, AIM and ELF electronic structure analysis revealed no evidence for the correlation between the basicity of phosphoryl oxygen atom and alkyl chain length in phosphate ligands.

In this work, we manifest the fabrication of a simple, portable, and benign solid-state sensor for the quantification of toxic Hg2+ ions through ocular colorimetric sensing. The sensor fabrication is modulated through sol-gel process using two different block-polymer surfactants (PEO and F108) for the formation of mesoporous silica monolithic designs that are immobilized with tailor-made probe molecules. The crack-free porous silica monoliths are structurally engineered to form, (i) highly ordered honey-combed 3D cubic, and (ii) disoriented worm-like mesopore structures that facilitates homogeneous probe anchoring through constrained spatial orientations for the selective detection of ultra-trace Hg2+ ions. The monolithic sensor materials are characterized by FE-SEM, HR-TEM, p-XRD, SAED, EDAX, XPS, FT-IR, TGA, and N2 isotherm analysis. For ensuring unambiguous ion-sensing, analytical parameters such as solution pH, temperature, kinetics, probe concentration, sensor quantity, linear signal response, matrix tolerance, the limit of detection (LD), and quantification (LQ) are optimized. The LD and LQ values for probe anchored PEO-MSM based sensor are 0.61 & 2.05 ppb and for probe anchored F108-MSM based sensor are 0.22 & 0.72 ppb, respectively, in the corresponding linear response range of 0−100 ppb and 0−50 ppb of Hg2+, which has been validated by real-time analysis of natural water samples.

We present a facile approach towards the fabrication of solid state optical sensors for the naked-eye sensing of carcinogenic Cr6+ ions, using porous polymer and silica monoliths, as probe anchoring templates. The monoliths proffer superior structural properties of high surface area and capacious pore size for the uniform and voluminous probe anchoring. The surface morphology and structural features of the monoliths are analyzed using various surface and structural characterization techniques. The solid-state optical sensors are concocted by the transmogrification of monoliths through impregnation of an amphipathic chromoionophore i.e., 1,5-bis-(4-butylphenyl)carbazone (BBPC), as the ion-sensing probe. The sensors offer long-term stability and rapid response kinetics (