Search

The aim of this article is to show difficulties arising when courts judge the negligence of dog owners in absence of precise legislation and typical precedents. We analyze the elements of a crime in two cases where children were objects of canine aggression, and show how the courts constructed the issue of dog owners’ negligence. In Case 1 the Court of Appeal found that a foster parent was not negligent when leaving a boy with specific needs alone with a heavily built dog that then repeatedly bit the boy to death despite the owners attempt to pull away the dog. The court also ignored the signs of substandard animal husbandry including previous severe incidents where the dog owner also was injured. In Case 2, the Court of Appeal instead found that the breed of the dog also matter, and that not even adult presence is enough to protect a child from dog attack. Because both the child and the dog could behave unpredictably, continuous observation and supervision was required. In both cases, measures to prevent the incident were available and would have been easy to carry out.

A major part of residues from pulp industry are deposited as waste at high disposal costs. Thispaper summarizes a five-year research project concerning implementation of an industrial,automatic roll-pelletizing method at a heating plant in the city of Kalmar, Sweden and presentsthe visions of the newly initiated research project where pulp industry residues are recycledtogether with wood ash. Also combustion issues are included.

The results of this pilot study demonstrate that it is possible to construct a reliable questionnaire from prior validated surveys. This questionnaire displays possible suitability for further development into a tool for a comprehensive dog welfare assessment. The welfare model used is assuming that canine welfare consists of three major considerations, the dogs’ behavior, the dogs’ quality of life (QoL dog) and the owner’s quality of life as pertaining to being a dog owner (QoL Owner). A questionnaire was constructed and tested. Three different parts from reliable and validated sections of previous surveys were included: 1) a modified C-BARQ, 2) QoL for the dog, and 3) QoL owner. 185 satisfactory answers were obtained from the respondents, dog owners in Sweden, Canada and USA. Principal component factor analysis rendered 13 extracted factors similar to the original questionnaires, suggesting that the construct is valid. Eleven of the thirteen factors showed moderate internal consistency of Cronbach’s alpha >0.7, the remaining two factors were relatively low with Cronbach’s alpha >0.6. Several significant correlations between the extracted factors were found. Quality of life as a dog owner (QoL owner) was significantly affected by stress caused by dogs displaying fear, excitability and separation anxiety. No significant correlations were found between any factors describing aggressive behaviors and the dogs QoL or QoL owner. Several significant correlations were found between the extracted factors and the demographics, for instance, the Swedes are more active with their dogs compared to Americans and Canadians. Further investigations should be commenced to validate the results in a larger population.

The inspection protocols of the Swedish police, based on the Act (2007:1150) on Supervision of Dogs and Cats, were used to examine the characteristics of 101 seized dogs, their owners, and the circumstances in which the attacks occurred. Most common reasons to seize a dog was that the dog owner was not following a previous order or ban, or that the dog had attacked and caused damage to humans or animals. The most common circumstances of the attacks involved dogs that escaped from gardens, unleashed dogs on walks and attacks by dogs on a leash. Bull breeds caused the highest number of injuries, the most serious injuries, and they were most often categorized as high risk, followed by Rottweilers and German Shepherds. Affenpinscher, Chihuahua, Cocker Spaniel, Japanese Spitz, Pug, Shih Tzu, Shetland Sheepdog and Golden Retriever were identified as victim breeds. The seized dogs had caused substantial harm to humans, animals, and their environment. The largest proportion of dogs returned to owners occurred in the Stockholm region.

Sustainable whole-tree harvesting practice requires that nutrient removal from the forest is compensated. Wood ashes contain all the nutrients, except for nitrogen, that are found in unburned fuel and can also increase soil pH, which makes ash recycling a natural way to stabilize the nutrient balance and counteract the acidification of forest soils that occurs due to intensive forest management. Several methods for processing ashes into spreadable products have been developed. The aim of this paper is to compare these methods. The study mainly focused on an economic evaluation of production, transportation and the spreading of self-hardened ash, ash pellets and ash granules. Self-hardened ash is generally considered to be the cheapest alternative to manufactured ash products, but these results imply that the most cost effective alternative is ash pellets. Around 27% of total costs could be earned from recycling the ash by producing pellets and 8% if granules are produced instead of self-hardened ash. This partly depends on the higher density of the pellets and granules and a significant reduction in the number of transportation operations. The reduction in transportation operations and diesel consumption also has major environmental benefits. Furthermore, it is more efficient to produce granules and pellets than it is to produce self-hardened ash and it is also easier to produce a reliable product of an appropriate size, shape and texture for a market that has well defined requirements.

Forest clearing through slash and burn to open up agricultural land is an ongoing process in large parts of the Amazon Basin. This activity severely affects the structure and balance of the natural ecosystem, and also has the potential to cause substantial changes in landscape geochemistry. The latter is the topic of this study, with special attention on translocation of potentially toxic trace elements from deforested areas to downstream aquatic and terrestrial systems. Sampling of floodplain sediments and mountain soils (Inceptisols on redbed lithologies) was carried out in two adjacent Subandean river basins, with deforestation extents of ca. 1/3 and 2/3 of the basin areas. Several toxic and potentially toxic metals (e.g., Hg, Cd, Pb, Cu and Ni) and other major and minor elements showed concentration peaks at certain depths in the alluvial deposits of both basins. These peaks were associated with organic matter, and occurred just below layers of combustion residues originating from burning of in situ biomass. Downward migration of particles originating in the combustion residues is suggested to be the direct mechanisms of the metal enrichments. Further evidence of an in situ origin of the metal peaks in the sediments was provided by the geochemical composition of soils located upstream of the floodplains. Disturbed soils (i.e. soils of pasture, coffee plantations, secondary forest and recently swidden fields) were found to be similar to soils under natural forest. Moreover, trace element concentrations in floodplain deposits were similar in the two drainage basins despite the large difference in exploitation degree. Thus, no evidence was found of large scale (basin-wide) increases in trace-metal leaching or translocation as a result of the extensive deforestation and agricultural land-use that has been practiced in the Amazonian highland jungle over more than 100 a.

Companies that generate a large amount of wood ash will need an industrial process to agglomerate the ash and lower its reactivity, because untreated ash is a dust hazard for workers and is difficu ...

Recycling of wood ash is based on the presumption that moderate concentrations of environmentally harmful elements are a part of the nutrient cycle and do not increase in net concentrations in the forest soil. It is assumed that the same quantities of harmful elements are harvested from the forest and recycled back. This principle does not apply to polycyclic aromatic hydrocarbons (PAHs) since these pollutants are formed during the combustion process, especially when the combustion performance is poor. Additionally, industrial combustors are adjusted in order to reduce NOx-emissions, indirectly causing formation of PAHs. This study examined fly ash from combustion of pulverized wood for its elemental and PAH concentrations during a period of 9 weeks. The 16 EPA-PAH concentrations range between 40 and 300 mg kg−1. Re-burning of the ash reduces the PAH concentrations to 0.24 mg kg−1 and organic carbon concentration from 40% to 5%, enhancing its composition significantly. It is important to determine the amount and fate of PAHs spread on forest soils with wood ash to ensure the improvement of the health of the forest ecosystem. Maximized energy efficiency of industrial boilers is the key to reducing anthropogenic emissions of greenhouse gases and enabling a sustainable nutrient recycling system.

The World Organization for Animal Health (OIE) allows rope casting and the tying of legs for nonhuman animal slaughter without stunning. The handling and welfare of bovine livestock (Bos indicus and Bubalus bubalis) were studied in 8 local abattoirs in 5 districts of Bangladesh. A total of 302 animals were evaluated. At the local abattoirs, approximately 1/3 of the cattle and water buffalo were either emaciated or injured/sick. The size and vigor of the animals determined the casting method. Small and weak animals were cast on concrete floors by lifting a foreleg followed by pushing, or simply by twisting the head of the animal and then binding the legs with rope. Vigorous animals such as buffalo were cast using ropes and human force. Bleeding was slow and flaying was sometimes initiated before the animals were unconscious. Pulling and tearing of the trachea and pouring of water into the exposed trachea shortly after cutting were also observed in some cases. The overall animal handling was unnecessarily rough and the OIE standards were not implemented. Animals are subjected to considerable mistreatment, and there is an urgent need for the training and education of the staff in abattoirs concerning humane slaughtering practices as well as a need to build modern slaughtering plants in Bangladesh.

Formalin footbaths are commonly used in the dairy industry to prevent cattle hoof diseases. Although formalin is a well-documented disinfectant, it is also a carcinogen and irritant. The aim of this study was to estimate the exposure of farm workers and dairy cattle to formaldehyde from footbaths located in a milking facility and a heifer facility at a dairy farm in western New York, USA. The dairy farm included approximately 3900 dairy cattle including young stock; of these, 1670 cows were milked three times per day in a 60-stall carousel milking parlor, and approximately 800 heifers were located at the heifer facility where footbaths with formalin were in use. The formaldehyde concentration of the air was measured using a Formaldemeter™ htV approximately 50cm above the 3% formalin footbaths in the milking (one footbath location) and heifer (three footbath locations) facilities on three consecutive days. The measured formaldehyde concentrations varied between 0.00 and 2.28ppm, falling within the safety guidelines established by the Occupation Safety and Health Administration (OSHA) of the United States. Significant differences were found in the formaldehyde concentrations at the different footbath locations in the heifer facility, potentially due to the varying levels of ventilation at each location. Changes in the ambient temperature during the 3-day sampling period did not significantly affect the concentrations. We believe that the substantial ventilation at both the heifer and milking facilities ensured that the formaldehyde concentrations did not exceed OSHA guidelines, thus permitting the safe use of formalin footbaths in this farm.

Use of biofuels in the form of logging residues is increasing in the European countries. This intensive forestry, where entire trees are removed from the felling sites, may contribute to a negative nutrient balance in the forest soil. Recycling of ash from the combustion of clean wood fuel, sometimes in combination with limestone or additives/binders, back into the forest soil could maintain the soil nutrient reservoir intact. Before spreading ash, it is important to determine its contents and, particularly, its decomposition pattern using reliable laboratory leaching tests. In this study, mineralogy and the leaching of Na, Ca, K, Mg, Mn, Al, Cu, Fe, P, and Zn from wood ash pellets and granules, produced both from green liquor sludge and fly ash, are examined by XRD and by subjecting these substances to three different laboratory leaching tests: upflow percolation (CEN/TS 14405), batch leaching (SS-EN12457), and a new Swedish leaching test using a magnetic stirrer. Mineral phases such as quartz, ettringite, calcite, gehlenite, and aphtitalite were identified in the ash granules and in the ash/green liquor sludge granules, by means of XRD. Six additional minerals were detected in the granules of ash only, and another six in the ash/green liquor sludge granules. At L/S 2, the batch leaching test resulted in the highest amounts of elements leached and the upflow percolation test the lowest. At L/S 10, both the batch leaching test and the upflow percolation test resulted in high amounts of elements leached. The batch leaching test at L/S 10 complies quite well with the percolation test and could be suitable for ash/green liquor sludge granule evaluation in daily practice. The magnetic stirrer test seems to underestimate the release potential of elements from granules. The batch test is simple to perform, and has the ability to dissolve 70-80% of the elements with the highest mobility from the materials under study.

Limestone and dolomite powder were tested as binders during wood ash agglomeration on an industrial and a laboratory scale. Two agglomeration methods are compared. Dolomite from Estonia is commonly used as a binder/additive during automatic production of agglomerated wood ash at the central heating plant of Kalmar, Sweden. Swedish limestones from Oland and Ignaberga as well as Swedish dolomite from Glanshammar were used as binders in the production of test agglomerates of wood ash. The chemical and mineralogical composition of the binders as well as of the resulting granules and pellets is presented. The structural, chemical and leaching properties of the hardened ash/binder agglomerates are discussed in relation to their possible environmental impact on forest soil. The environmental acceptance of recycling of agglomerated ashes to forest soils is also discussed in relation to the new recommendations.