Search

We report on the impact of the magnetic domain stripe configuration on the critical velocity of vortices in superconducting/ferromagnetic bilayers. Using a 23 nm thick Mo$_2$N film, covered by a 48 nm FePt layer with tunable nanosized striped domains, we demonstrate that flux instability at low magnetic fields depends on the orientation of the stripes. When the stripes are perpendicular to the applied current and act as vortex guides, the velocity values reach 5 km/s, duplicating those found when configured parallel to the current, creating winding vortex paths. Our results indicate that vortex critical velocities can be tuned by configuring different domain structures, providing a platform to understand vortex dynamics in superconducting microstrips., Comment: 5 pages, 3 figures

We report the precise control of tunneling magnetoresistance (TMR) in devices of self-assembled core/shell Fe$_3$O$_4$/Co$_{1-x}$Zn$_x$Fe$_2$O$_4$ nanoparticles ($0\leq x\leq 1$). Adjusting the magnetic anisotropy through the content of Co$^{2+}$ in the shell, provides an accurate tool to control the switching field between the bistable states of the TMR. In this way, different combinations of soft/hard and hard/soft core/shell configurations can be envisaged for optimizing devices with the required magnetotransport response., Comment: 25 pages, 7 figures

We report on an experimental and theoretical study of the high-frequency mixing properties of ion-irradiated YBa2Cu3O7 Josephson junctions embedded in THz antennas. We investigated the influence of the local oscillator power and frequency on the device performances. The experimental data are compared with theoretical predictions of the general three-port model for mixers, in which the junction is described by the resistively shunted junction model. A good agreement is obtained for the conversion efficiency in different frequency ranges, spanning above and below the characteristic frequencies fc of the junctions.

Reproducible High Tc Josephson junctions have been made in a rather simple two-step process using ion irradiation. A microbridge 1 to 5 micrometers wide is firstly designed by ion irradiating a c-axis-oriented YBa2Cu3O7 film through a gold mask such as the unprotected part becomes insulating. A lower Tc part is then defined within the bridge by irradiating with a much lower dose through a 20 nm wide narrow slit opened in a standard electronic photoresist. These planar junctions, whose settings can be finely tuned, exhibit reproducible and nearly ideal Josephson characteristics. Non hysteretic Resistively Shunted Junction (RSJ) like behavior is observed, together with sinc Fraunhofer patterns for rectangular junctions. The IcRn product varies with temperature ; it can reach a few mV. The typical resistance ranges from 0.1 to a few ohms, and the critical current density can be as high as 30 kA/cm2. The dispersion in characteristics is very low, in the 5% to 10% range. Such nanojunctions have been used to make microSQUIDs (Superconducting Quantum Interference Device) operating at Liquid Nitrogen (LN2) temperature. They exhibit a very small asymmetry, a good sensitivity and a rather low noise. The process is easily scalable to make rather complex Josephson circuits., Comment: 4 pages, 5 figures, Applied Superconductivity Conference Seattle 2006