Search

This work employs a combination of pressure trace analysis, high-speed optical measurements and laser-based techniques for the assessment of the effects of various post-injection schemes on the soot reduction potential in an optical single-cylinder light-duty diesel engine. The engine was operated under a multiple injection scheme of two pilot and one main injection, typical of a partially premixed combustion mode, at the lower end of the load and engine speed range (ca 2.0 bar IMEP at 1200 r/min). Experiments considering the influence of the post-injection fuel amount (up to 15% of the total fuel quantity per cycle) and the post-injection timing within the expansion stroke (5, 10 and 15 CAD aTDC), under a constant total fuel mass per cycle, have been conducted. Findings were analysed via means of pressure trace and apparent rate of heat transfer analyses, as well as a series of optical diagnostic techniques, namely, high-speed flame natural luminosity imaging, CH*, C∗2 and OH* line-of-sight chemiluminescence, as well as planar laser-induced incandescence measurements at 31 and 50 CAD aTDC. The combination of post-injection fuel amount and timing has substantial effects on charge reactivity and soot oxidation potential. The analysis reveals that an amount of fuel (7% of the total fuel mass per cycle) injected more than 10 CAD after the main combustion event leads to higher levels of soot emissions, while a larger amount of fuel (15% of the total fuel mass) injected 5 CAD after the main combustion event appears to have a beneficial effect on the soot oxidation processes. Overall, results indicate that a post-injection scheme close to the main combustion phasing could reduce soot levels and improve engine performance, that is, higher IMEP levels at the same fuel consumption rates, although it could increase engine noise.

The present work investigates the effect of the injection dwell time and injection pressure on soot reduction potential in an optical single-cylinder light-duty diesel engine. The engine operated under a double-injection scheme under low load and low engine speed conditions. The conducted experiments considered two different dwell times for three different injection pressures. The fuel quantity of the main injection was adjusted to maintain the same indicated mean effective pressure (IMEP) value among all cases considered. Findings were analyzed via means of pressure trace and apparent heat release rate (AHRR) analyses, as well as a series of optical diagnostics techniques, namely high-speed imaging and planar laser-induced incandescence (pLII). The combination of dwell time and injection pressure substantially affects charge reactivity and soot oxidation potential. The analysis suggests that a shorter dwell time combined with a higher injection pressure can lead to an enhanced potential for engine-out particulate reduction by creating an in-cylinder environment that promotes soot oxidation. Overall, results indicate that a close-coupled pilot and main injection scheme can reduce soot levels, albeit while increasing specific fuel consumption by up to 12% to maintain the same engine power output levels.