Search

The gastrointestinal (GI) tract, particularly the colon region, holds a highly diverse microbial community that plays an important role in the metabolism, physiology, nutrition, and immune function of the host body. Accumulating evidence has revealed that alteration in these microbial communities is the pivotal step in developing various metabolic diseases, including obesity, inflammatory bowel disease (IBD), and colorectal cancer. However, there is still a lack of clear understanding of the interrelationship between microbiota and diet as well as the effectiveness of chemoprevention strategies, including pre and probiotic agents in modifying the colonic microbiota and preventing digestive diseases. Existing methods for assessing these microbiota-diet interactions are often based on samples collected from the feces or endoscopy techniques which are incapable of providing information on spatial variations of the gut microbiota or are considered invasive procedures. To address this need, here we have developed an electronic-free smart capsule that enables site-specific sampling of the gut microbiome within the proximal colon region of the GI tract. The 3D printed device houses a superabsorbent hydrogel bonded onto a flexible polydimethylsiloxane (PDMS) disk that serves as a milieu to collect the fluid in the gut lumen and its microbiome by rapid swelling and providing the necessary mechanical actuation to close the capsule after the sampling is completed. The targeted colonic sampling is achieved by coating the sampling aperture on the capsule with a double-layer pH-sensitive enteric coating, which delays fluid in the lumen from entering the capsule until it reaches the proximal colon of the GI tract. To identify the appropriate pH-responsive double-layer coating and processing condition, a series of systematic dissolution characterizations in different pH conditions that mimicked the GI tract was conducted. The effective targeted microbial sampling performance and preservation of the smart capsule with the optimized design were validated using both realistic in vitro GI tract models with mixed bacteria cultures and in vivo with pigs as an animal model. The results from 16s rRNA and WideSeq analysis in both in vitro and in vivo studies showed that the bacterial population sampled within the retrieved capsule closely matched the bacterial population within the targeted sampling region (proximal colon). Herein, it is envisioned that such smart sampling capsule technology will provide new avenues for gastroenterological research and clinical applications, including diet-host-microbiome relationships, focused on human GI function and health. STATEMENT OF SIGNIFICANCE: The colonic microbiota plays a major role in the etiology of numerous diseases. Extensive efforts have been conducted to monitor the gut microbiome using sequencing technologies based on samples collected from feces or mucosal biopsies that are typically obtained by colonoscopy. Despite the simplicity of fecal sampling procedures, they are incapable of preserving spatial and temporal information about the bacteria through the gastrointestinal (GI) tract. In contrast, colonoscopy is an invasive and impractical approach to frequently assess the effect of dietary and therapeutic intake on the microbiome and their impact on the health of the patient. Here, we developed a non-invasive capsule that enables targeted sampling from the ascending colon, thereby providing crucial information for disease prediction and monitoring.

During the γ-radiation sterilization process, the levels of radiation exposure to a medical device must be carefully monitored to achieve the required sterilization without causing deleterious effects on its intended physical and chemical properties. To address this issue, here we have demonstrated the development of an all-printed disposable low-cost sensor that exploits the change in electrical impedance of a semi-interpenetrating polymer network (SIPN) composed of poly(vinyl alcohol) (PVA) and poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) as a functional polymer composite for radiation sterilization monitoring applications. Specifically, the PEDOT:PSS acts as the electrically conductive medium, while the PVA provides the ductility and stability of the printed sensors. During irradiation exposure, chain scission and cross-linking events occur concurrently in the PEDOT:PSS and PVA polymer chains, respectively. The concurrent scissoring of the PEDOT polymer and cross-linking of the PVA polymer network leads to the formation of a stable SIPN with reduced electrical conductivity, which was verified through FTIR, Raman, and TGA analysis. Systematic studies of different ratios of PEDOT:PSS and PVA mixtures were tested to identify the optimal ratio that provided the highest radiation sensitivity and stability performance. The results showed that PEDOT:PSS/PVA composites with 10 wt % PVA produced sensors with relative impedance changes of 30% after 25 kGy and up to 370% after 53 kGy (which are two of the most commonly used radiation exposure levels for sterilization applications). This composition showed high electrical impedance stability with less than ±5% change over 18 days after irradiation exposure. These findings demonstrate the feasibility of utilizing a printing technology for scalable manufacturing of low-cost, flexible radiation sensors for more effective monitoring of radiation sterilization processes.

Many commercially available pH sensors are fabricated with a glass membrane as the sensing component because of several advantages of glass-based electrodes such as versatility, high accuracy, and excellent stability in various conditions. However, because of their bulkiness and poor mechanical properties, conventional glass-based sensors are not ideal for wearable or flexible applications. Here, we report for the first time the fabrication of a flexible glass-based pH sensor suitable for biomedical and environmental applications where flexibility and stability of the sensor are critical for long-term and real-time monitoring. The sensor was fabricated via a simple and facile approach using the cold atmospheric plasma technique in which a pH sensitive silica coating was deposited from a siloxane precursor onto a carbon electrode. In order to increase the sensitivity and stability of the sensor, we employed a postprocessing step which involves annealing of the silica coated electrode at elevated temperatures. This process was optimized to ensure that the crucial properties such as porosity and hydration functionality were balanced to obtain the best and most reliable sensitivity of the sensor. Our sensitivity test results indicated that these sensors exhibit excellent and stable sensitivity with a slope of about 48 mV/pH (

This work illustrates the development of a low-cost wireless sensor tag that could be placed in packaged medical products to accurately monitor the level of radiation exposure during the sterilization process.

Here we report a simple approach to increase the stability performance of all-solid-state electrochemical sensors by improving the interfacial bonding between the ion selective membrane and electrode through cold atmospheric plasma surface treatment.

Contamination of meat with pathogenic microorganisms can cause severe illnesses and food waste, which has significant negative impacts on both general health and the economy. In many cases, the expiration date is not a good indicator of meat freshness as there is a high risk of contamination during handling throughout the supply chain. Many biomarkers, including color, odor, pH, temperature, and volatile compounds, are used to determine spoilage. Among these, pH presents a simple and effective biomarker directly linked to the overgrowth of bacteria and degradation of the meat tissue. Low-cost methods for wireless pH monitoring are crucial in detecting spoilage on a large commercial scale. Existing technologies are often limited to short-range detection, with the use of batteries and different electronic components that increases both the manufacturing complexity and cost of the final device. To address these shortcomings, we have developed a cost-effective wireless pH sensor, which uses passive resonant frequency (RF) sensing, combined with a pH-responsive polymer that can be placed within packaged meat products and provide a remote assessment of the risk of microbial spoilage throughout the supply chain. The sensor tag consists of a sensing resonator coated with a pH-sensitive material and a passivated reference resonator operating in a differential frequency configuration. Upon exposure to elevated pH levels6.8, the coating on the sensing resonator dissolves, which in turn results in a distinct change in the resonant frequency with respect to the reference resonator. Systematic theoretical and experimental results at different pH levels demonstrated that a 20% shift in resonant frequency demarcates the point for spoilage detection. As a proof of concept, the performance of the sensor in remotely detecting the risk of food spoilage was validated in packaged poultry over 10 days. The sensor fabrication process takes advantage of recent developments in the scalable manufacturing of flexible, low-cost devices, including selective laser etching of metalized plastic films and doctor-blade coating of stimuli-responsive polymer films. Furthermore, the biocompatibility of all the materials used in the sensor was confirmed with human intestinal cells (HCT-8 cells).

The problematic combination of a rising prevalence of skin and soft tissue infections and the growing rate of life-threatening antibiotic resistant infections presents an urgent, unmet need for the healthcare industry. These evolutionary resistances originate from mutations in the bacterial cell walls which prevent effective diffusion of antibiotics. Gram-negative bacteria are of special consideration due to the natural resistance to many common antibiotics due to the unique bilayer structure of the cell wall. The system developed here provides one solution to this problem through a wearable therapy that delivers and utilizes gaseous ozone as an adjunct therapy with topical antibiotics through a novel dressing with drug-eluting nanofibers (NFs). This technology drastically increases the sensitivity of Gram-negative bacteria to common antibiotics by using oxidative ozone to bypass resistances created by the bacterial cell wall. To enable simple and effective application of adjunct therapy, ozone delivery and topical antibiotics have been integrated into a single application patch. The drug delivery NFs are generated via electrospinning in a fast-dissolve PVA mat without inducing decreasing gas permeability of the dressing. A systematic study found ozone generation at 4 mg/h provided optimal ozone levels for high antimicrobial performance with minimal cytotoxicity. This ozone treatment was used with adjunct therapy delivered by the system in vitro. Results showed complete eradication of Gram-negative bacteria with ozone and antibiotics typically used only for Gram-positive bacteria, which showed the strength of ozone as an enabling adjunct treatment option to sensitize bacteria strains to otherwise ineffective antibiotics. Furthermore, the treatment is shown through biocompatibility testing to exhibit no cytotoxic effect on human fibroblast cells.

Copper oxide nanostructures are widely used for various applications due to their unique optical and electrical properties. In this work, we demonstrate an atmospheric laser-induced oxidation technique for the fabrication of highly electrochemically active copper oxide hierarchical micro/nano structures on copper surfaces to achieve highly sensitive non-enzymatic glucose sensing performance. The effect of laser processing power on the composition, crystallinity, microstructure, wettability, and color of the laser-induced oxide on copper (LIO-Cu) surface was systematically studied using scanning electron microscopy (SEM), grazing incidence X-ray diffraction (GI-XRD), Raman spectroscopy, energy dispersive X-ray spectroscopy (EDX), EDX-mapping, water contact angle measurements, and optical microscopy. Results of these investigations showed a remarkable increase in copper oxide composition by increasing the laser processing power. The pore size distribution and surface area of the pristine and LIO-Cu sample estimated by N2 adsorption–desorption data showed a developed mesoporous LIO-Cu structure. The size of the generated nano-oxides, crystallinity, and electroactivity of the LIO-Cu were observed to be adjustable by the laser processing power. The electrocatalytic activity of LIO-Cu surfaces was studied by means of cyclic voltammetry (CV) within a potential window of −0.8 to +0.8 V and chronoamperometry in an applied optimized potential of +0.6 V, in 0.1 M NaOH solution and phosphate buffer solution (PBS), respectively. LIO-Cu surfaces with optimized laser processing powers exhibited a sensitivity of 6950 μA mM−1 cm−2 within a wide linear range from 0.01 to 5 mM, with exceptional specificity and response time (

Gut microbiota plays an important role in host physiology such as obesity, diabetes, and various neurological diseases. Thus, microbiome sampling is a fundamental approach towards better understanding of possible diseases. However, conventional sampling methods, such as endoscopies or colonoscopies, are invasive and cannot reach the entire small intestine. To address this need, a battery-less 3D-printed sampling capsule, which can collect microbiome samples throughout the entirety of the GI tract was designed. The capsule (9 mm × 15 mm) consists of a 3D printed acrylic housing, a fast-absorbing hydrogel, and a flexible PDMS membrane. Fluids containing samples of the microbial flora within the GI tract enter the device through a sampling aperture on the cap of the device. Once the microbiome enters the housing, the hydrogel absorbs the fluid and swells, effectively protecting the samples within its polymeric matrix, while also pushing on the flexible PDMS membrane to block the sampling aperture from further fluid exchange. The retrieved capsule can be readily disassembled due to the screw-cap design of the capsule and the hydrogel can be removed for further bacterial culture and analysis. As a proof of concept, the capsule's bacterial sampling efficiency and the ability to host microbial samples within the hydrogel in a sealed capsule were validated using a liquid culture containing Escherichia coli. The demonstrated technology provides a promising inexpensive tool for direct sampling and assessment of microbes throughout the GI tract and can enable new insights into the role of diet in mediating host–microbe interactions and metabolism.

We are introducing a wireless and passive strain sensing scheme that utilizes ultrasound imaging of a highly stretchable hydrogel embedded with zinc oxide (ZnO) nanoparticles, named "ZnO-gel". The incorporation of ZnO nanoparticles into a polymer network of the hydrogel improves both its elasticity and strength. It also serves as an ideal biocompatible ultrasound contrast agent that allows remote interrogation of the changes in volume or dimensions of the hydrogel in response to mechanical strains through simple ultrasound imaging. A systematic study of various ratios of ZnO nanoparticle fillers (ranging from 0 to 40% w/w), cross-linked within the poly (DMA

Chronic nonhealing wounds are a growing socioeconomic problem that affects more than 6 million people annually solely in the United States. These wounds are colonized by bacteria that often develop into biofilms that act as a physical and chemical barrier to therapeutics and tissue oxygenation leading to chronic inflammation and tissue hypoxia. Although wound debridement and vigorous mechanical abrasion techniques are often used by clinical professionals to manage and remove biofilms from wound surfaces, such methods are highly nonselective and painful. In this study, we have developed a flexible polymer composite microneedle array that can overcome the physicochemical barriers (i.e., bacterial biofilm) present in chronic nonhealing wounds and codeliver oxygen and bactericidal agents. The polymeric microneedles are made by using a facile UV polymerization process of polyvinylpyrrolidone and calcium peroxide onto a flexible polyethylene terephthalate substrate for conformable attachment onto different locations of the human body surface. The microneedles effectively elevate the oxygen levels from 8 to 12 ppm once dissolved over the course of 2 h while also providing strong bactericidal effects on both liquid and biofilm bacteria cultures of both Gram-positive (

Although serum and fecal biomarkers (e.g., lactoferrin, and calprotectin) have been used in management and distinction between inflammatory bowel disease (IBD) and irritable bowel syndrome (IBS), none are proven to be a differential diagnostic tool between Crohn's disease (CD) and ulcerative colitis (UC). The main challenge with laboratory-based biomarkers in the stool test is the inability to indicate the location of the disease/inflammation in the gastrointestinal (GI) tract due to the homogenous nature of the collected fecal sample. For the first time, we have designed and developed a battery-free smart capsule that will allow targeted sampling of inflammatory biomarkers inside the gut lumen of the small intestine. The capsule is designed to provide a simple and non-invasive complementary tool to fecal biomarker analysis to differentiate the type of IBD by pinpointing the site of inflammatory biomarkers secretion (e.g., small or large bowel) throughout the GI tract. The capsule takes advantage of the rapid change from an acidic environment in the stomach to higher pH levels in the small intestine to dissolve a pH-sensitive polymeric coating as a means to activate the sampling process of the capsule within the small intestine. A swelling polyacrylamide hydrogel is placed inside the capsule as a milieu to collect the sampled GI fluid while also providing the required mechanical actuation to close the capsule once the sampling is completed. The hydrogel component along with the collected GI fluid can be easily obtained from the capsule through the screw-cap design for further extraction and analysis. As a proof of concept, the capsule's performance in sampling and extraction of bovine serum albumin (BSA) and calprotectin - a key biomarker of inflammation - was assessed within the physiologically relevant ranges. The ratio of extracted biomarkers relative to that in the initial sampling environment remained constant (∼3%) and independent of the sampling matrix in both in vitro and ex vivo studies. It is believed that the demonstrated technology will provide immediate impact in more effective IBD type differential diagnostic and treatment strategies by providing a non-invasive assessment of inflammation biomarkers profile throughout the digestive tract.

Currently, one of the main environmental concerns is the toxicity caused by arsenic. Arsenic-polluted water can cause many human health problems including various cancerous diseases. In natural water, inorganic arsenic can be found in the forms of arsenite and arsenate, which have been found in several Iranian provinces – e.g., East Azerbaijan, Kurdistan, and the city of Bijar – in high concentrations. Modern nanofiltration (NF) technology enables a wide range of water resource pollutants to be controlled efficiently. In this study, in an attempt to enhance arsenic removal (both arsenite and arsenate) from drinking water using low pressure NF, operating conditions like arsenic concentration, the trans-membrane pressure applied, and a range of different temperatures have all been considered. The highest arsenate removal achieved was 94% with an initial concentration of 500 μg/L, at 7 bar pressure, and 28 °C. The highest arsenite removal was 90%, with an initial concentration of 100 μg/L, at 5 bar pressure, and also at 28 °C. Increasing the pressure had a positive effect on the removal of both species, however, increasing the temperature had negative impacts. It was always found that arsenate removal was better than arsenite removal.

Thermal desalination of high salinity water resources is crucial for increasing freshwater supply, but efficiency enhancements are badly needed. Nanomaterial enhancements offer enormous potential for improving promising technologies like membrane distillation (MD). However, while many approaches have been tried, such as nanoparticle solar absorbers or nanomaterial membranes, there have not been studies to directly enhance the fluid properties in MD; via nanofluids. In this work, we examine nanofluids for gap-based MD systems, including the role of nanoscale physics and system-level energy efficiency enhancements. Our model includes the dominant micro-mixing from Brownian motion in fine particle nanofluids (copper oxide) and the unusually high axial conduction from phonon resonance through Van der Waals interaction in carbon nanotube nanofluids. Carbon nanotubes resulted in consistent, wide range of improvements; while copper oxide particles showcased diminishing returns after a concentration of 0.7%, where Brownian motion effects reduced. Nanofluid characterizations illustrated uniform dispersions after at least 75 min of sonication and using surfactants to stabilize the nanoparticles through micelle formations. However, the enhancements at higher concentrations from liquid layering around nanoparticles were impractical in gap-based MD configurations, since the related high surfactant levels compromised membrane hydrophobicity and promoted fouling. Dilute solutions of metallic nanofluids can be actively integrated to enhance the performance of gap-based MD systems, whereas stronger nanofluid solutions should be limited to heat exchangers that meet their thermal energy requirements.

Microbial contamination and biofilm formation are serious challenges in water filtration applications. Recently, carbon nanocomposite membranes with modified silver nanoparticles (AgNPs) have attracted much attention as compelling water purification membranes that can deactivate pathogenic bacteria and prevent biofilm formation. However, the effective attachment of AgNPs onto such carbon-based surfaces has proven difficult to accomplish via inexpensive and rapid fabrication processes. In this study, we introduce a simple laser-assisted process that enables rapid surface functionalization and immobilization of AgNPs onto carbon cloth membrane surfaces comprised of woven carbon micro fibers. The laser functionalization provides a unique modification in surface morphology of the fibers by creating nanotextures as well as inducing changes in surface chemistry, all of which increase the physical and chemical bonding of AgNPs onto the surface of carbon fibers. Elemental and surface morphology analysis via XRD, SEM, and EDX reveal a uniform coating and strong attachment of AgNPs onto the laser functionalized carbon surface, even after vigorous mechanical agitations and probe sonication. The analysis showed the samples prepared by the laser functionalization prior to AgNPs coating provided exceptional antibacterial activity and ability to completely eradicate the bacteria within 4 h and resist biofilm formation against pathogenic bacterial strains of Escherichia coli. The developed technology provides new opportunities to develop a scalable, fast, and cost-effective preparation method for producing carbon-based materials/membranes with high antimicrobial activities which can be applied for water purification and other environmental applications.

Since no pretreatment method is foolproof for the removal of foulants in reverse osmosis (RO) systems, the aim is to keep the production process efficiency as high as possible. In the vast majority of RO desalination plants, biofouling of membranes is considered as one of the most common operational problems. In this study, a full-scale seawater reverse osmosis (SWRO) desalination plant which was subject to severe biofouling was investigated. Autopsy showed higher biofilm concentrations near the inlet of the module likely due to the abundancy of nutrients. CFD simulation was also used to realize how the geometry of the module inlet could impact the flow within the membrane leaves and thus biofouling. A pilot-scale system including silicon carbide ultrafiltration (SiC-UF) membranes was established in order to filter biological matters. According to the results of this study, SiC-UF membranes appeared to be a reliable pretreatment method for removing almost 100% of all micro-organisms.