Search

This work introduces a two-channel time-interleaved (TI) continuous-time (CT) 3rd-order delta-sigma modulator (DSM). It uses the information from one complete channel to predict the other channel based on the extrapolation principle. Note that, Cascaded Integrator of Distributed Feedforward (CIFF) topology is selected for the loop filter for the following reasons: 1) it could reduce the number of required feedback DACs as much as possible; 2) it allows to implement the zero optimization for the TI DSM such that the performance could be further improved. Furthermore, we employ the technique of error correction to address the issue regarding the delay-free feedback path, which originates from the extrapolating TI DSM. We present the derivations of the target TI CT DSM starting from a single-channel discrete-time (DT) DSM, while the compensation for excess loop delay (ELD) is considered. Fabricated in 65nm CMOS process, this modulator achieves an equivalent output sampling rate of 800MS/s, while the analog channel operates at 400MHz. It exhibits a signal-to-noise and distortion ratio (SNDR) /spurious-free dynamic range (SFDR)/dynamic range (DR) of 75.5dB/89.7dB/79dB over a 10MHz bandwidth. The total power consumption is 33.73mW from 1.2v/1.8v power supplies. It results in a Schreier Figure of Merit (FoM) of 163.7dB based on DR.

This article presents a power-delay-optimized monotonic-specific successive approximation register (SAR) ADC. The SAR feedback loop, comprising the proposed unbalanced N/P-MOS sizing technique, simultaneously reduces the SAR logic delay and the power to overcome the SAR ADC’s speed bottleneck. Benefiting from this technique, the sampling rate of the prototype 10b single channel 1b/cycle SAR ADC reaches 600 and 700 MS/s at 0.9 and 0.95 V supply voltage, while consuming 1.49 and 2.02 mW in 28 nm CMOS, respectively. Moreover, the 10b ADC achieves the SNDR of 56.39 and 56.42-dB at a Nyquist rate input frequency of 600 and 700 MS/s, leading to a Walden FoM of 4.6 and 5.3 fJ/conversion-step, respectively.

This paper presents a continuous-time (CT) 0–4 dual-stage Multi-stAge Noise-sHaping (MASH) Delta-Sigma Modulator (DSM), exhibiting +5dBFS maximum stable amplitude (MSA). In the context of 0–4 MASH topology, the 4-bit CT DSM employed as the second stage only processes 4-bit quantization noise (QN) of the front-end. Though the input signal exceeds the full scale (FS), the second stage still stays stable as long as the signal leakage does not overload it. Such feature guarantees the improved stability over a wider signal input range. In addition, to address the well-known QN leakage issue of MASH topology, we propose to combine the feedforward topology with proportional-integral-based excess loop delay compensation. It ensures high robustness of the proposed 0–4 MASH DSM without requiring any calibration. Additionally, we present an analysis of the anti-aliasing filtering (AAF) for the 0-X MASH DSM. It is found that the overall AAF of the 0-X MASH DSM is contributed from the second stage. Sampled at 400MHz, the 65nm CMOS experimental prototype measures signal-to-noise and distortion ratio (SNDR)/spurious-free dynamic range (SFDR) of 76.7dB/87.3dB over a 10MHz bandwidth with 15.1mW power consumption. Moreover, with achieving +5dBFS MSA, the dynamic range (DR) is extended to be as high as 85dB, resulting in a state-of-the-art Scherier Figure of Merit (FoM) of 173.2dB based on DR.

This article presents a modified KY (M-KY) converter, which provides a continuous flying capacitor charging current in discontinuous conduction mode (DCM), when compared with the conventional KY converter. This modification extends the load current range, improves the power efficiency, and simplifies the zero current detection (ZCD). To meet IoT application requirements, we implement a double clock timing (DCT) control combined with an adaptive sizing technique, which obtains a high efficiency over a wide load range, with a fast load transient response. To reduce the chip size and quiescent current, we also adopt a clocked-feedback resistor network (CFRN). Implemented in standard 65-nm CMOS, the proposed M-KY converter achieves a peak efficiency of 95% and a wide load current ranging from 0.001 to 100 mA (100 000X load range). Under a load transient between $6~\mu \text{A}$ and 100 mA, the measured recovery time is within a single slow clock cycle of $5~\mu \text{s}$ . The measured minimum quiescent current is 240 nA with an active chip area of 0.15 mm2.