Search

Aqueous suspensions of poorly soluble, crystalline drug particles in the sub-micron range hold the ability to regulate the drug release for a defined period of time after e.g., intramuscular, or subcutaneous administration, working as an eminent formulation strategy for the preparation of long-acting injectables. Aqueous suspensions are typically prepared by top-down approaches, e.g., wet bead media milling or high-pressure homogenization, containing the active pharmaceutical compound and surfactants and/or polymers for stabilization purposes. Currently, the screening of proper stabilizers and adequate stabilizer concentration during formulation investigations is based on a trial-and-error approach with variations in combinations, concentrations, and/or ratios. To obtain a more efficient methodology during formulation screening, the present study investigated the correlation between the surface activity of two different surfactants, i.e., poloxamer 188 and polysorbate 20, by drop profile tensiometry and Langmuir trough monolayer, and the obtained sizes of cinnarizine particles as a tool to predict the optimal surfactant concentration to prepare physical stable nano- and microsuspensions. The obtained results demonstrated that the molecular area determined as the area per surfactant molecule measured in the Langmuir trough combined with the specific surface area of the prepared suspensions could be used to predict the suitable concentration of the surfactant based upon short-term stress stability data. The results further showed that higher concentrations of poloxamer 188 were necessary to stabilize the suspensions when compared to the needed concentration of polysorbate 20. In addition, it was observed that there was a need for a slightly higher surfactant concentration when the suspensions were milled with the smallest bead size of 0.5 mm instead of larger sizes of bead (0.8 and 1.0 mm), which could not be accounted for by differences in specific surface area., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

The major myelin protein expressed by the peripheral nervous system Schwann cells is protein zero (P0), which represents 50% of the total protein content in myelin. This 30-kDa integral membrane protein consists of an immunoglobulin (Ig)-like domain, a transmembrane helix, and a 69-residue C-terminal cytoplasmic tail (P0ct). The basic residues in P0ct contribute to the tight packing of myelin lipid bilayers, and alterations in the tail affect how P0 functions as an adhesion molecule necessary for the stability of compact myelin. Several neurodegenerative neuropathies are related to P0, including the more common Charcot-Marie-Tooth disease (CMT) and Dejerine-Sottas syndrome (DSS) as well as rare cases of motor and sensory polyneuropathy. We found that high P0ct concentrations affected the membrane properties of bicelles and induced a lamellar-to-inverted hexagonal phase transition, which caused bicelles to fuse into long, protein-containing filament-like structures. These structures likely reflect the formation of semicrystalline lipid domains with potential relevance for myelination. Not only is P0ct important for stacking lipid membranes, but time-lapse fluorescence microscopy also shows that it might affect membrane properties during myelination. We further describe recombinant production and low-resolution structural characterization of full-length human P0. Our findings shed light on P0ct effects on membrane properties, and with the successful purification of full-length P0, we have new tools to study the role of P0 in myelin formation and maintenance in vitro., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Plasma membrane damage and rupture occurs frequently in cells, and holes must be sealed rapidly to ensure homeostasis and cell survival. The membrane repair machinery is known to involve recruitment of curvature-inducing annexin proteins, but the connection between membrane remodeling and hole closure is poorly described. The induction of curvature by repair proteins leads to the possible formation of a membrane neck around the hole as a key intermediate structure before sealing. We formulate a theoretical model of equilibrium neck shapes to examine the potential connection to a repair mechanism. Using variational calculus, the shape equations for the membrane near a hole are formulated and solved numerically. The system is described under a condition of fixed area, and a shooting approach is applied to fulfill the boundary conditions at the free membrane edge. A state diagram of neck shapes is produced describing the variation in neck morphology with respect to the membrane area. Two distinct types of necks are predicted, one with conformations curved beyond π existing at positive excess area, whereas flat neck conformations (curved below π) have negative excess area. The results indicate that in cells, the supply of additional membrane area and a change in edge tension is linked to the formation of narrow and curved necks. Such necks may be susceptible to passive or actively induced membrane fission as a possible mechanism for hole sealing during membrane repair in cells., Competing Interests: Declaration of interests The authors declare no competing interests., (Copyright © 2024 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Hypothesis: Plant protein ingredients from similar sources can vary in functionality not only because of compositional differences, but also because of differences in their structure depending on their processing history. It is essential to understand these distinctions to develop novel food emulsion using plant proteins. It is hypothesized that differing interfacial properties can be attributed to their structures, aggregation, and colloidal states., Experiments: The adsorption behavior of a commercial protein isolate, homogenized or non-homogenized, was compared to a mildly extracted isolate to evaluate the effect of aggregation state and structural differences. After characterization of the particle size and protein composition, the interfacial properties were compared., Findings: Atomic force microscopy provided evidence of interfaces packed with protein oligomers regardless of the treatment. Differences in adsorption kinetics and interfacial shear rheology depending on oil polarity suggested different interfacial structures. A polydisperse mixture of protein oligomers resulted in increased rearrangements and protein-protein interactions at the interface. Homogenization of commercial proteins resulted in a lower interfacial tension and less elastic interfaces compared to those of native proteins due to the presence of larger aggregates. This study highlights how the interfacial properties can be related to the protein aggregation state resulting from differences in processing history., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Inc. All rights reserved.)

The annexins are a family of Ca 2+ -dependent peripheral membrane proteins. Several annexins are implicated in plasma membrane repair and are overexpressed in cancer cells. Annexin A4 (ANXA4) and annexin A5 (ANXA5) form trimers that induce high curvature on a membrane surface, a phenomenon deemed to accelerate membrane repair. Despite being highly homologous to ANXA4, annexin A3 (ANXA3) does not form trimers on the membrane surface. Using molecular dynamics simulations, we have reverse engineered an ANXA3-mutant to trimerize on the surface of the membrane and induce high curvature reminiscent of ANXA4. In addition, atomic force microscopy images show that, like ANXA4, the engineered protein forms crystalline arrays on a supported lipid membrane. Despite the trimer-forming and curvature-inducing properties of the engineered ANXA3, it does not accumulate near a membrane lesion in laser-punctured cells and is unable to repair the lesion. Our investigation provides insights into the factors that drive annexin-mediated membrane repair and shows that the membrane-repairing property of trimer-forming annexins also necessitates high membrane binding affinity, other than trimer formation and induction of negative membrane curvature., Competing Interests: Declaration of interests The authors declare no competing interests., (Copyright © 2023 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Efficient plasma membrane repair (PMR) is required to repair damage sustained in the cellular life cycle. The annexin family of proteins, involved in PMR, are activated by Ca 2+ influx from extracellular media at the site of injury. Mechanistic studies of the annexins have been overwhelmingly performed using a single annexin, despite the recruitment of multiple annexins to membrane damage sites in living cells. Hence, we investigate the effect of the presence of the crosslinking annexins, annexin A1, A2 and A6 (ANXA1, ANXA2 and ANXA6) on the membrane curvature induction of annexin A4 (ANXA4) in model membrane systems. Our data support a mechanistic model of PMR where ANXA4 induced membrane curvature and ANXA6 crosslinking promotes wound closure. The model now can be expanded to include ANXA1 and ANXA2 as specialist free edge membrane crosslinkers that act in concert with ANXA4 induced curvature and ANXA6 crosslinking., (© 2022. The Author(s).)

Lipid droplet biogenesis comprises the emergence of cytosolic lipid droplets with a typical diameter 0.1-5 μm via synthesis of fat in the endoplasmatic reticulum, the formation of membrane-embedded lenses, and the eventual budding of lenses into solution as droplets. Lipid droplets in cells are increasingly being viewed as highly dynamic organelles with multiple functions in cell physiology. However, the mechanism of droplet formation in cells remains poorly understood, partly because their formation involves the rapid transformation of transient lipid structures that are difficult to capture. Thus, the development of controlled experimental systems that model lipid biogenesis is highly relevant for an enhanced mechanistic understanding. Here we prepare and characterize triolein (TO) lenses in a multilamellar spin-coated phosphatidylcholine (POPC) film and determine the lens nucleation threshold to 0.25-0.5% TO. The TO lens shapes are characterized by atomic force microscopy (AFM) including their mean cap angle ⟨α⟩ = 27.3° and base radius ⟨ a ⟩ = 152.7 nm. A cross-correlation analysis of corresponding AFM and fluorescence images confirms that TO is localized to lenses. Hydration of the lipid/lens film induces the gel to fluid membrane phase transition and makes the lenses more mobile. The budding of free droplets into solution from membrane lenses is detected by observing a change in motion from confined wiggling to ballistic motion of droplets in solution. The results confirm that droplet budding can occur spontaneously without being facilitated by proteins. The developed model system provides a controlled platform for testing mechanisms of lipid droplet biogenesis in vitro and addressing questions related to lens formation and droplet budding by quantitative image analysis.

Peripheral myelin protein 2 (P2) is a fatty acid-binding protein expressed in vertebrate peripheral nervous system myelin, as well as in human astrocytes. Suggested functions of P2 include membrane stacking and lipid transport. Mutations in the PMP2 gene, encoding P2, are associated with Charcot-Marie-Tooth disease (CMT). Recent studies have revealed three novel PMP2 mutations in CMT patients. To shed light on the structure and function of these P2 variants, we used X-ray and neutron crystallography, small-angle X-ray scattering, circular dichroism spectroscopy, computer simulations and lipid binding assays. The crystal and solution structures of the I50del, M114T and V115A variants of P2 showed minor differences to the wild-type protein, whereas their thermal stability was reduced. Vesicle aggregation assays revealed no change in membrane stacking characteristics, while the variants showed altered fatty acid binding. Time-lapse imaging of lipid bilayers indicated formation of double-membrane structures induced by P2, which could be related to its function in stacking of two myelin membrane surfaces in vivo. In order to better understand the links between structure, dynamics and function, the crystal structure of perdeuterated P2 was refined from room temperature data using neutrons and X-rays, and the results were compared to simulations and cryocooled crystal structures. Our data indicate similar properties for all known human P2 CMT variants; while crystal structures are nearly identical, thermal stability and function of CMT variants are impaired. Our data provide new insights into the structure-function relationships and dynamics of P2 in health and disease., (© 2021 The Authors. The FEBS Journal published by John Wiley & Sons Ltd on behalf of Federation of European Biochemical Societies.)

Hypothesis: Annexin A4 and A5 (ANXA4, ANXA5), both shown to be required for efficient plasma membrane repair (PMR) in living cells, bind as trimers to anionic membranes in the presence of calcium. Both annexins induce membrane curvature and self-assemble into crystal arrays on membranes, observations that have been associated with PMR. However, in-vitro studies of annexins have traditionally been performed using single annexins, despite the recruitment of multiple annexins to the damage site in cells. Hence, we study the potential cooperativity of ANXA4 and ANXA5 during membrane binding., Experiments: Laser injury experiments were performed on MCF7 cells transfected to transiently express labelled ANXA4 and ANXA5 to study the localization of the proteins at the damage site. Using free-edged DOPC/DOPS (9:1) membranes we investigated the annexin-induced membrane rolling by fluorescence microscopy and the lateral arrangement of annexin trimers on the membrane surface by atomic force microscopy (AFM)., Finding: ANXA4 and ANXA5 colocalise at the damage site of MCF7 cells during repair. A (1:1) mixture of ANXA4 and ANXA5 induces membrane rolling with a time constant intermediate between the value for the pure annexins. While binding of the pure annexins creates crystal lattices, the (1:1) mixture generates a random arrangement of trimers. Thus, curvature induction remains as a functional property of annexin mixtures in PMR rather than crystal formation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Inc. All rights reserved.)

A novel concept of stabilizing multiple-phase food structure such as emulsion using solely the constitutional bacteria enables an all-natural food grade formulation and thus a clean label declaration. In this paper, we propose an efficient approach to hydrophobically modifying the surface of lactic acid bacteria Lactobacillus rhamnosus (LGG) using lauroyl ahloride (LC) in non-aqueous media. Compared to the unmodified bacteria, cell hydrophobicity was dramatically altered upon modification, according to the higher percentages of microbial adhesion to hexadecane (MATH) and water contact angles (WCA) of LC-modified bacteria. No evident changes were found in bacterial surface charge before and after LC modification. By using one-step homogenization, all the modified bacteria were able to generate stabile water-in-oil-in-water (W/O/W) double emulsions where bacteria were observed on oil-water interfaces of the primary and secondary droplets. Modification using high LC concentrations (10 and 20 w/w%) led to rapid autoaggregation of bacteria in aqueous solution. A long-term lethal effect of modification primarily came from lyophilization and no apparent impact was detected on the instantaneous culturability of modified bacteria., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Repair of damaged plasma membrane in eukaryotic cells is largely dependent on the binding of annexin repair proteins to phospholipids. Changing the biophysical properties of the plasma membrane may provide means to compromise annexin-mediated repair and sensitize cells to injury. Since, cancer cells experience heightened membrane stress and are more dependent on efficient plasma membrane repair, inhibiting repair may provide approaches to sensitize cancer cells to plasma membrane damage and cell death. Here, we show that derivatives of phenothiazines, which have widespread use in the fields of psychiatry and allergy treatment, strongly sensitize cancer cells to mechanical-, chemical-, and heat-induced injury by inhibiting annexin-mediated plasma membrane repair. Using a combination of cell biology, biophysics, and computer simulations, we show that trifluoperazine acts by thinning the membrane bilayer, making it more fragile and prone to ruptures. Secondly, it decreases annexin binding by compromising the lateral diffusion of phosphatidylserine, inhibiting the ability of annexins to curve and shape membranes, which is essential for their function in plasma membrane repair. Our results reveal a novel avenue to target cancer cells by compromising plasma membrane repair in combination with noninvasive approaches that induce membrane injuries., Competing Interests: Conflict of interest The authors declare no competing financial interests or other conflicts of interest., (Copyright © 2021 The Authors. Published by Elsevier Inc. All rights reserved.)

The plasma membrane shapes and protects the eukaryotic cell from its surroundings and is crucial for cell life. Although initial repair mechanisms to reseal injured membranes are well established, less is known about how cells restructure damaged membranes in the aftermath to restore homeostasis. Here, we show that cells respond to plasma membrane injury by activating proteins associated with macropinocytosis specifically at the damaged membrane. Subsequent to membrane resealing, cells form large macropinosomes originating from the repair site, which eventually become positive for autophagy-related LC3B protein. This process occurs independent of ULK1, ATG13, and WIPI2 but dependent on ATG7, p62, and Rubicon. Internalized macropinosomes shrink in the cytoplasm, likely by osmotic draining, and eventually fuse with lysosomes. We propose that a form of macropinocytosis coupled to noncanonical autophagy, which we term LC3-associated macropinocytosis (LAM) functions to remove damaged material from the plasma membrane and restore membrane integrity upon injury., (Copyright © 2021 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).)

Self-association of cholesterol into aggregates and crystals is a hallmark of developing atherosclerosis. Intrinsically fluorescent sterols, such as dehydroergosterol (DHE), can be used to study sterol aggregation by fluorescence spectroscopy and microscopy, but a thorough understanding of DHE's photophysical and structural properties in the aggregated state is missing. Here, we show that DHE forms submicron fluorescent aggregates when evaporated from an ethanol solution. Using atomic force microscopy, we find that DHE, like cholesterol, forms compact oblate-shape aggregates of <100 nm in diameter. DHE's fluorescence is lowered in the aggregate compared to the monomeric form, and characteristic spectral changes accompany the aggregation process. Electronic structure calculations of DHE dimers in water indicate that Frenkel-type exciton coupling contributes to the lowered DHE fluorescence in the aggregates. Using molecular dynamics (MD) simulations, we show that DHE forms compact aggregates on the nanosecond scale and with strong intermolecular attraction, in which a broad range of orientations, and therefore electronic couplings, will take place. Tight packing of DHE in aggregates also lowers the apparent absorption cross section, further reducing the molecular brightness of the aggregates. Our results pave the way for systematic solubility studies of intrinsically fluorescent analogues of biologically relevant sterols.

Rapid membrane repair is required to ensure cell survival after rupture of the plasma membrane. The annexin family of proteins is involved in plasma membrane repair (PMR) and is activated by the influx of Ca 2+ from the extracellular medium at the site of injury. Annexins A1 and A2 (ANXA1 and ANXA2, respectively) are structurally similar and bind to negatively charged phosphatidylserine (PS) to induce membrane cross-linking and to promote fusion, which are both essential processes that occur during membrane repair. The degree of annexin accumulation and the annexin mobility at cross-linked membranes are important aspects of ANXA1 and ANXA2 function in repair. Here, we quantify ANXA1- and ANXA2-induced membrane cross-linking between giant unilamellar vesicles (GUVs). Time-lapse measurements show that ANXA1 and ANXA2 can induce membrane cross-linking on a time scale compatible with PMR. Cross-linked membrane-membrane interfaces between the GUVs persist in time without fusion, and quantification of confocal microscopy images demonstrates that ANXA1, ANXA2, and, to a lesser extent, PS lipids accumulate at the double membrane interface. Fluorescence recovery after photobleaching shows that the annexins are fully immobilized at the double membrane interface, whereas PS lipids display a 75% decrease in mobility. In addition, the complete immobilization of annexins between two membranes indicates a high degree of network formation between annexins, suggesting that membrane cross-linking is mainly driven by protein-protein interactions.

Plasma membrane repair is essential for eukaryotic cell life and is triggered by the influx of calcium through membrane wounds. Repair consists of sequential steps, with closure of the membrane hole being the key event that allows the cell to recover, thus identifying the kinetics of hole closure as important for clarifying repair mechanisms and as a quantitative handle on repair efficiency. We implement calcium imaging in MCF7 breast carcinoma cells subject to laser damage, coupled with a model describing the spatio-temporal calcium distribution. The model identifies the time point of hole closure as the time of maximum calcium signal. Analysis of cell data estimates the closure time as: [Formula: see text] s and [Formula: see text] s using GCaMP6s-CAAX and GCaMP6s probes respectively. The timescale was confirmed by independent time-lapse imaging of a hole during sealing. Moreover, the analysis estimates the characteristic time scale of calcium removal, the penetration depth of the calcium wave and the diffusion coefficient. Probing of hole closure times emerges as a strong universal tool for quantification of plasma membrane repair.

The plasma membrane surrounds every single cell and essentially shapes cell life by separating the interior from the external environment. Thus, maintenance of cell membrane integrity is essential to prevent death caused by disruption of the plasma membrane. To counteract plasma membrane injuries, eukaryotic cells have developed efficient repair tools that depend on Ca 2+ - and phospholipid-binding annexin proteins. Upon membrane damage, annexin family members are activated by a Ca 2+ influx, enabling them to quickly bind at the damaged membrane and facilitate wound healing. Our recent studies, based on interdisciplinary research synergy across molecular cell biology, experimental membrane physics, and computational simulations show that annexins have additional biophysical functions in the repair response besides enabling membrane fusion. Annexins possess different membrane-shaping properties, allowing for a tailored response that involves rapid bending, constriction, and fusion of membrane edges for resealing. Moreover, some annexins have high affinity for highly curved membranes that appear at free edges near rupture sites, a property that might accelerate their recruitment for rapid repair. Here, we discuss the mechanisms of annexin-mediated membrane shaping and curvature sensing in the light of our interdisciplinary approach to study plasma membrane repair.

Membrane curvature effects are important in numerous cellular processes and many membrane interacting proteins induce spontaneous curvature upon membrane binding. Shiga and cholera toxins both belong to the AB5 family of toxins and consist of a toxic A subunit and a membrane-binding pentameric B subunit. Shiga and cholera toxins induce tubular membrane invaginations in cells and GUVs due to curvature effects and the toxins are known from MD simulations to induce curvature. Membrane invaginations have been linked to uptake of the toxins into cells. As a novel model system to experimentally characterize curvature-inducing proteins, we study the morphology induced in planar membrane patches. It was previously shown that annexins induce distinct morphologies in membrane patches including membrane rolling. In this study we show that the B subunits of Shiga and cholera toxins (STxB, CTxB) both induce roll-up of cell-sized membrane patches. Rolling starts from the free membrane edges of the patch and is completed within a few seconds. We characterize the branched roll morphology and find experimental estimates for the spontaneous curvature of the toxins based on the topography of rolls. The estimates are in agreement with previous MD simulations. We quantify the dynamics of rolling as induced by the toxins and demonstrate agreement with a theoretical model of the rolling dynamics. The model solves the equation of motion for a membrane roll and includes viscous drag and adhesion to the support. The results suggest that membrane rolling may be a general phenomenon displayed by many proteins that induce negative curvature in membranes with free edges.

The plasma membrane of eukaryotic cells defines the boundary to the extracellular environment and, thus provides essential protection from the surroundings. Consequently, disruptions to the cell membrane triggered by excessive mechanical or biochemical stresses pose fatal threats to cells, which they need to cope with to survive. Eukaryotic cells cope with these threats by activating their plasma membrane repair system, which is shared by other cellular functions, and includes mechanisms to remove damaged membrane by internalization (endocytosis), shedding, reorganization of cytoskeleton and membrane fusion events to reseal the membrane. Members of the annexin protein family, which are characterized by their Ca2+-dependent binding to anionic phospholipids, are important regulators of plasma membrane repair. Recent studies based on cellular and biophysical membrane models show that they have more distinct functions in the repair response than previously assumed by regulating membrane curvature and excision of damaged membrane. In cells, plasma membrane injury and flux of Ca2+ ions into the cytoplasm trigger recruitment of annexins including annexin A4 and A6 to the membrane wound edges. Here, they induce curvature and constriction force, which help pull the wound edges together for eventual fusion. Cancer cells are dependent on efficient plasma membrane repair to counteract frequent stress-induced membrane injuries, which opens novel avenues to target cancer cells through their membrane repair system. Here, we discuss mechanisms of single cell wound healing implicating annexin proteins and membrane curvature., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

The plasma membrane of eukaryotic cells forms the essential barrier to the extracellular environment, and thus plasma membrane disruptions pose a fatal threat to cells. Here, using invasive breast cancer cells we show that the Ca 2+ - and phospholipid-binding protein annexin A7 is part of the plasma membrane repair response by enabling assembly of the endosomal sorting complex required for transport (ESCRT) III. Following injury to the plasma membrane and Ca 2+ flux into the cytoplasm, annexin A7 forms a complex with apoptosis linked gene-2 (ALG-2) to facilitate proper recruitment and binding of ALG-2 and ALG-2-interacting protein X (ALIX) to the damaged membrane. ALG-2 and ALIX assemble the ESCRT III complex, which helps excise and shed the damaged portion of the plasma membrane during wound healing. Our results reveal a novel function of annexin A7 - enabling plasma membrane repair by regulating ESCRT III-mediated shedding of injured plasma membrane.

Annexins are a family of proteins characterized by their ability to bind anionic membranes in response to Ca 2+ -activation. They are involved in a multitude of cellular functions including vesiculation and membrane repair. Here, we investigate the effect of nine annexins (ANXA1-ANXA7, ANXA11, ANXA13) on negatively charged double supported membrane patches with free edges. We find that annexin members can be classified according to the membrane morphology they induce and matching a dendrogam of the annexin family based on full amino acid sequences. ANXA1 and ANXA2 induce membrane folding and blebbing initiated from membrane structural defects inside patches while ANXA6 induces membrane folding originating both from defects and from the membrane edges. ANXA4 and ANXA5 induce cooperative roll-up of the membrane starting from free edges, producing large rolls. In contrast, ANXA3 and ANXA13 roll the membrane in a fragmented manner producing multiple thin rolls. In addition to rolling, ANXA7 and ANXA11 are characterized by their ability to form fluid lenses localized between the membrane leaflets. A shared feature necessary for generating these morphologies is the ability to induce membrane curvature on free edged anionic membranes. Consequently, induction of membrane curvature may be a significant property of the annexin protein family that is important for their function.

Efficient cell membrane repair mechanisms are essential for maintaining membrane integrity and thus for cell life. Here we show that the Ca 2+ - and phospholipid-binding proteins annexin A4 and A6 are involved in plasma membrane repair and needed for rapid closure of micron-size holes. We demonstrate that annexin A4 binds to artificial membranes and generates curvature force initiated from free edges, whereas annexin A6 induces constriction force. In cells, plasma membrane injury and Ca 2+ influx recruit annexin A4 to the vicinity of membrane wound edges where its homo-trimerization leads to membrane curvature near the edges. We propose that curvature force is utilized together with annexin A6-mediated constriction force to pull the wound edges together for eventual fusion. We show that annexin A4 can counteract various plasma membrane disruptions including holes of several micrometers indicating that induction of curvature force around wound edges is an early key event in cell membrane repair.

Higher sterols are universally present in large amounts (20-30%) in the plasma membranes of all eukaryotes whereas they are universally absent in prokaryotes. It is remarkable that each kingdom of the eukaryotes has chosen, during the course of evolution, its preferred sterol: cholesterol in animals, ergosterol in fungi and yeast, phytosterols in higher plants, and e.g., fucosterol and desmosterol in algae. The question arises as to which specific properties do sterols impart to membranes and to which extent do these properties differ among the different sterols. Using a range of biophysical techniques, including calorimetry, fluorescence microscopy, vesicle-fluctuation analysis, and atomic force microscopy, we have found that fucosterol and desmosterol, found in red and brown macroalgae (seaweeds), similar to cholesterol support liquid-ordered membrane phases and induce coexistence between liquid-ordered and liquid-disordered domains in lipid bilayers. Fucosterol and desmosterol induce acyl-chain order in liquid membranes, but less effectively than cholesterol and ergosterol in the order: cholesterol>ergosterol>desmosterol>fucosterol, possibly reflecting the different molecular structure of the sterols at the hydrocarbon tail., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The objective of the research presented in this paper was to investigate how different characteristics of whey protein microparticles (MWP) added to milk as fat replacers influence intermolecular interactions occurring with other milk proteins during homogenisation and heating. These interactions are responsible for the formation of heat-induced aggregates that influence the texture and sensory characteristics of the final product. The formation of heat-induced complexes was studied in non- and low-fat milk model systems, where microparticulated whey protein (MWP) was used as fat replacer. Five MWP types with different particle characteristics were utilised and three heat treatments used: 85 °C for 15 min, 90 °C for 5 min and 95 °C for 2 min. Surface characteristics of the protein aggregates were expressed as the number of available thiol groups and the surface net charge. Intermolecular interactions involved in the formation of protein aggregates were studied by polyacrylamide gel electrophoresis and the final complexes visualised by darkfield microscopy. Homogenisation of non-fat milk systems led to partial adsorption of caseins onto microparticles, independently of the type of microparticle. On the contrary, homogenisation of low-fat milk resulted in preferential adsorption of caseins onto fat globules, rather than onto microparticles. Further heating of the milk, led to the formation of heat induced complexes with different sizes and characteristics depending on the type of MWP and the presence or not of fat. The results highlight the importance of controlling homogenisation and heat processing in yoghurt manufacture in order to induce desired changes in the surface reactivity of the microparticles and thereby promote effective protein interactions.

We have reconstituted functional Na(+)/K(+)-ATPase (NKA) into giant unilamellar vesicles (GUVs) of well-defined binary and ternary lipid composition including cholesterol. The activity of the membrane system can be turned on and off by ATP. The hydrolytic activity of NKA is found to depend on membrane phase, and the water relaxation in the membrane on the presence of NKA. By collapsing and fixating the GUVs onto a solid support and using high-resolution atomic-force microscopy (AFM) imaging we determine the protein orientation and spatial distribution at the single-molecule level and find that NKA is preferentially located at lo/ld interfaces in two-phase GUVs and homogeneously distributed in single-phase GUVs. When turned active, the membrane is found to unbind from the support suggesting that the protein function leads to softening of the membrane., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Gel domains in lipid bilayers are structurally more complex than fluid domains. Growth dynamics can lead to noncircular domains with a heterogeneous orientational texture. Most model membrane studies involving gel domain morphology and lateral organization assume the domains to be static. Here we show that rosette shaped gel domains, with heterogeneous orientational texture and a central topological defect, after early stage growth, undergo slow relaxation. On a time scale of days to weeks domains converge to circular shapes and approach uniform texture. 1,2-Dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) enriched gel domains are grown by cooling 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC):DPPC bilayers into the solid-liquid phase coexistence region and are visualized with fluorescence microscopy. The relaxation of individual domains is quantified through image analysis of time-lapse image series. We find a shape relaxation mechanism which is inconsistent with Ostwald ripening and coalescence as observed in membrane systems with coexisting liquid phases. Moreover, domain texture changes in parallel with the changes in domain shape, and selective melting and growth of particular subdomains cause the texture to become more uniform. We propose a relaxation mechanism based on relocation of lipids from high-energy lattice positions, through evaporation-condensation and edge diffusion, to low-energy positions. The relaxation process is modified significantly by binding Shiga toxin, a bacterial toxin from Shigella dysenteriae, to the membrane surface. Binding alters the equilibrium shape of the gel domains from circular to eroded rosettes with disjointed subdomains. This observation may be explained by edge diffusion while evaporation-condensation is restricted, and it provides further support for the proposed overall relaxation mechanism.

Lateral variation of the in-plane orientation of lipids in a bilayer is referred to as texture. The influence of the protein Shiga toxin on orientational membrane texture was studied in phosphatidylcholine lipid bilayers using polarization two-photon fluorescence microscopy and atomic force microscopy. A content of 1% of glycosphingolipid globotriaosylceramide (Gb3) receptor lipids in a bilayer was used to bind the Shiga toxin B-subunit to the surface of gel domains. Binding of the Shiga toxin B-subunit to lipids led to the modulation of orientational membrane texture in gel domains and induced membrane reordering. When Shiga toxin was added above the lipid chain melting temperature, the toxin interaction with the membrane induced rearrangement and clustering of Gb3 lipids that resulted in the long range order and alignment of lipids in gel domains. The toxin induced redistribution of Gb3 lipids inside gel domains is governed by the temperature at which Shiga toxin was added to the membrane: above or below the phase transition. The temperature is thus one of the critical factors controlling lipid organization and texture in the presence of Shiga toxin. Lipid chain ordering imposed by Shiga toxin binding can be another factor driving the reconstruction of lipid organization and crystallization of lipids inside gel domains.

Polyaromatic hydrocarbons (PAHs) is a group of compounds, many of which are toxic, formed by incomplete combustion or thermal processing of organic material. They are highly lipophilic and thus present in some seed oils used for human consumption as well as being increasingly common in aquaculture diets due to inclusion of vegetable oils. Cytotoxic effects of PAHs have been thought to be partly due to a membrane perturbing effect of these compounds. A series of studies were here performed to examine the effects of three different PAHs (naphthalene, phenanthrene and benzo[a]pyrene) with different molecular sizes (two, three and five rings, respectively) and fat solubility (Kow 3.29, 4.53 and 6.04, respectively) on membrane models. The effects of PAHs on liquid-liquid phase coexistence in solid-supported lipid bilayers (dioleoylphosphocholine:dipalmitoylphosphatidylcholine:cholesterol) were assessed using fluorescence microscopy. Benzo[a]pyrene had a slight affinity for the liquid-ordered phase, but there were no effects of adding any of the other PAHs on the number or size of the liquid domains (liquid-ordered and liquid-disordered). Benzo[a]pyrene and phenanthrene, but not naphthalene, lowered the transition temperature (Tm) and the enthalpy (ΔH) characterising the transition from the solid to the liquid-crystalline phase in DPPC vesicles. The membrane effects of the PAH molecules are likely related to size, with bigger and more fat-soluble molecules having a fluidising effect when embedded in the membrane, possibly causing some of the observed toxic effects in fish exposed to these contaminants., (Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.)

We devise a methodology to fixate and image dynamic fluid domain patterns of giant unilamellar vesicles (GUVs) at sub-optical length scales. Individual GUVs are rapidly transferred to a solid support forming planar bilayer patches. These are taken to represent a fixated state of the free standing membrane, where lateral domain structures are kinetically trapped. High-resolution images of domain patterns in the liquid-ordered (lo) and liquid-disordered (ld) co-existence region in the phase-diagram of ternary lipid mixtures are revealed by atomic force microscopy (AFM) scans of the patches. Macroscopic phase separation as known from fluorescence images is found, but with superimposed fluctuations in the form of nanoscale domains of the lo and ld phases. The size of the fluctuating domains increases as the composition approaches the critical point, but with the enhanced spatial resolution, such fluctuations are detected even deep in the coexistence region. Agreement between the area-fraction of domains in GUVs and the patches respectively, supports the assumption that the thermodynamic state of the membrane remains stable. The approach is not limited to specific lipid compositions, but could potentially help uncover lateral structures in highly complex membranes., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The tilted gel phase of lipid bilayers can display in-plane orientational texture due to long-range alignment of the molecular director. We explore systematic variations of texture defects in a series of binary phospholipid membranes. Using polarized two-photon fluorescence microscopy, the texture pattern of single domains is revealed. The appearance of a central vortex-type defect in each domain correlates with a particular range of hydrophobic mismatch values h > 1 nm at the domain border while domains with h < 1 nm correlate with uniformly aligned texture. The central vortex defect is characterized by a defect angle, indicating its bend or splay nature. Using image analysis, we measure the defect angle and find that it has primarily bend character for small mismatch values (h ≈ 1 nm) and primarily splay nature for larger values of h. For domains containing a vortex, the domain shape is decoupled from the texture while for uniformly textured domains there is a preferred texture orientation of ≃45° along the domain border. The results establish a foundation for understanding texture phenomena in compositionally complex membranes.

This work comprises a structural and dynamical study of monolayers and bilayers composed of native pulmonary surfactant from mice. Spatially resolved information was obtained using fluorescence (confocal, wide field and two photon excitation) and atomic force microscopy methods. Lipid mass spectrometry experiments were also performed in order to obtain relevant information on the lipid composition of this material. Bilayers composed of mice pulmonary surfactant showed coexistence of distinct domains at room temperature, with morphologies and lateral packing resembling the coexistence of liquid ordered (lo)/liquid disordered (ld)-like phases reported previously in porcine lung surfactant. Interestingly, the molar ratio of saturated (mostly DPPC)/non-saturated phospholipid species and cholesterol measured in the innate material corresponds with that of a DOPC/DPPC/cholesterol mixture showing lo/ld phase coexistence at a similar temperature. This suggests that at quasi-equilibrium conditions, key lipid classes in this complex biological material are still able to produce the same scaffold observed in relevant but simpler model lipid mixtures. Also, robust structural and dynamical similarities between mono- and bi-layers composed of mice pulmonary surfactant were observed when the monolayers reach a surface pressure of 30mN/m. This value is in line with theoretically predicted and recently measured surface pressures, where the monolayer-bilayer equivalence occurs in samples composed of single phospholipids. Finally, squeezed out material attached to pulmonary surfactant monolayers was observed at surface pressures near the beginning of the monolayer reversible exclusion plateau (~40mN/m). Under these conditions this material adopts elongated tubular shapes and displays ordered lateral packing as indicated by spatially resolved LAURDAN GP measurements., (© 2013.)

The compound 2,6-diisopropylphenol (Propofol, PRF) is widely used for inducing general anesthesia, but the mechanism of PRF action remains relatively poorly understood at the molecular level. This work examines the possibility that a potential mode of action of PRF is to modulate the lipid order in target membranes. The effect on monolayers and bilayers of dipalmitoyl-sn-glycero-3-phosphorylcholine (DPPC) was probed using Langmuir monolayer isotherms, differential scanning calorimetry (DSC), isothermal titration calorimetry (ITC) and molecular dynamics (MD) simulations. Increasing amounts of PRF in a DPPC monolayer causes a decrease in isothermal compressibility modulus at the phase transition. A partition constant for PRF in DPPC liposomes on the order of K≈1500 M(-1) was found, and the partitioning was found to be enthalpy-driven above the melting temperature (Tm). A decrease in Tm with PRF content was found whereas the bilayer melting enthalpy ΔHm remains almost constant. The last finding indicates that PRF incorporates into the membrane at a depth near the phosphatidylcholine headgroup, in agreement with our MD-simulations. The simulations also reveal that PRF partitions into the membrane on a timescale of 0.5 μs and has a cholesterol-like ordering effect on DPPC in the fluid phase. The vertical location of the PRF binding site in a bacterial ligand-gated ion channel coincides with the location found in our MD-simulations. Our results suggest that multiple physicochemical mechanisms may determine anesthetic potency of PRF, including effects on proteins that are mediated through the bilayer., (Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.)

The orientational texture of gel-phase lipid bilayers is a phenomenon that can structure membrane domains. Using two-photon polarized fluorescence microscopy and image analysis, we map the lateral variation of the lipid orientation (the texture) in single domains. With this method, we uncover a lipid-induced transition between vortex and uniform textures in binary phospholipid bilayers. By tuning the lipid composition, the hydrophobic mismatch at the domain boundary can be varied systematically as monitored by AFM. Low hydrophobic mismatch correlates with domains having uniform texture, while higher mismatch values correlate with a vortex-type texture. The defect pattern created during early growth persists in larger domains, and a minimal model incorporating the anisotropic line tension and the vortex energy can rationalize this finding. The results suggest that the lipid composition and the domain nucleation process are critical factors that determine the texture pattern of membrane domains.

Background: Platelet (PLT) support is critical to the care of patients with thrombocytopenia, but allogeneic transfusions carry risk. Pathogen reduction mitigates some transfusion risks, but effects on PLT function remain a concern. This clinical pilot study assessed the effect of pathogen reduction technology with riboflavin plus ultraviolet light using thrombelastography (TEG)., Study Design and Methods: This prospective, randomized, crossover study compared Mirasol-treated (MIR) and standard reference (REF) PLT transfusions. PLT counts and TEG measurements were taken at pretransfusion and 1- and 24-hour-posttransfusion time points. The primary outcome measure was the pretransfusion to 1-hour-posttransfusion change in maximum amplitude (ΔMA(1 hr)). Secondary endpoints included ΔMA among other time points, relative MA, and the PLT count-MA correlation., Results: Of 16 enrolled patients, one withdrew before study treatment and three did not require two transfusions, leaving 12 patients in the efficacy analyses (seven MIR-REF, five REF-MIR). ΔMA(1 hr) (mean ± SD) was 10.60 ± 6.47 mm for MIR and 14.33 ± 5.38 mm for REF (p = 0.20, n = 10). ΔMA(24hr) was 9.49 ± 7.94 for MIR and 7.13 ± 3.08 for REF (p = 0.38, n = 9); ΔMA(24hr-1 hr) was -1.11 ± 2.95 for MIR and -7.20 ± 4.81 for REF (p = 0.016, n = 8). MA values for MIR and REF correlated with the log of PLT count (rMIR = 0.6901, rREF = 0.7399)., Conclusion: TEG is sensitive to changes in hemostatic function resulting from a single PLT transfusion. MIR and REF provided similar increments in hemostatic function in the immediate posttransfusion period and at 24 hours. A significant difference detected for ΔMA(24hr-1 hr) suggests different PLT clearance mechanisms. The relationship of these variables to clinically meaningful outcomes, for example, bleeding events or transfusion requirements, has yet to be determined., (© 2012 American Association of Blood Banks.)

Imaging ellipsometry (IE) has been applied to generate laterally resolved thickness maps of spin-coated membranes in both the dry and fully hydrated state. Spin-coating offers a convenient preparation method for stacked supported membranes, and in-depth thickness maps for such films can be measured by IE, thereby going beyond topography measurements of the top surface. We find that dry lipid films of POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) have a highly ordered multilamellar structure which allows counting of the number of individual bilayers in a thick film from the progression in a concentration series. The average film thickness is approximately proportional to the coating concentration with a constant of proportionality of 5.2 nm/mM and 6.2 nm/mM for POPC and DSPC (1,2-distearoyl-sn- glycero-3-phosphocholine), respectively. The root-mean-square roughness of the dry films is also approximately proportional to concentration with constants of 3.7 nm/mM (DSPC) and 0.87 nm/mM (POPC). Fully hydrated POPC membranes with several stacked bilayers show decreasing thickness for increasing temperature. An apparent excess in thickness by 1.2 nm for the proximal membrane can possibly be linked to the presence of a structured water film next to the solid support. This is supported by modeling of spectroscopic data. Thickness maps of double supported ternary membranes show resolvable liquid-ordered domains in the second membrane while domains are below the resolution limit in the proximal membrane. A thickness difference of 1.69 and 1.89 nm between the liquid-ordered (lo) and liquid-disordered (ld) phases is found for two different ternary membrane compositions. This is approximately twice the height difference measured by AFM on domains, thus indicating that the relative excess thickness of the lo phase is symmetrically distributed.

Background: Iron deficiency is a frequent side effect of blood donation. In recent years, several studies have described genetic variants associated with iron concentrations. However, the impact of these variants on iron levels is unknown in blood donors. Knowledge of genetic variants that predispose donors to iron deficiency would allow bleeding frequency and iron supplementation to be tailored to the individual donor., Study Design and Methods: The genotypes of five specific single-nucleotide polymorphisms (SNPs) in three genes that have been previously associated with iron status and/or restless leg syndrome (RLS) were investigated in two groups of female blood donors. The first group had low iron stores (serum ferritin ≤ 12 µg/L, n = 657), and the second group had normal to high iron stores (serum ferritin > 30 µg/L, n = 645). Genotype distribution for each of the SNPs was compared between the two groups., Results: Homozygosity for the T-allele of BTBD9 rs9296249 was associated with lower serum ferritin. The odds ratio for low serum ferritin was 1.35 (95% confidence interval, 1.02-1.77; p = 0.03) when comparing donors with the TT genotype with donors with the CT genotype., Conclusion: A frequent polymorphism in BTBD9 was significantly associated with serum ferritin. This polymorphism has previously been associated with RLS, but not low iron stores in blood donors., (© 2012 American Association of Blood Banks.)

We investigate the relationship between stripe domains and the ripple phase in membranes. These have previously been observed separately without being linked explicitly. Past results have demonstrated that solid and ripple phases exhibit rich textural patterns related to the orientational order of tilted lipids and the orientation of ripple corrugations. Here we reveal a highly complex network pattern of ripple and solid domains in DLPC, DPPC bilayers with structures covering length scales from 10 nm to 100 μm. Using spincoated double supported membranes we investigate domains by correlated AFM and fluorescence microscopy. Cooling experiments demonstrate the mode of nucleation and growth of stripe domains enriched in the fluorescent probe. Concurrent AFM imaging reveals that these stripe domains have a one-to-one correspondence with a rippled morphology running parallel to the stripe direction. Both thin and thick stripe domains are observed having ripple periods of 13.5±0.2 nm and 27.4±0.6 nm respectively. These are equivalent to previously observed asymmetric/equilibrium and symmetric/metastable ripple phases, respectively. Thin stripes grow from small solid domains and grow predominantly in length with a speed of ~3 times that of the thick stripes. Thick stripes grow by templating on the sides of thinner stripes or can emerge directly from the fluid phase. Bending and branching angles of stripes are in accordance with an underlying six fold lattice. We discuss mechanisms for the nucleation and growth of ripples and discuss a generic phase diagram that may partly rationalize the coexistence of metastable and stable phases., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Atomic force microscopy (AFM) has been used to study the structural and mechanical properties of low concentrated spin-coated dioleoylphosphatidylcholine (DOPC) layers in dry environment (RH ≈ 0%) at the nanoscale. It is shown that for concentrations in the 0.1-1 mM range the structure of the DOPC spin-coated samples consists of an homogeneous lipid monolayer ∼1.3 nm thick covering the whole substrate on top of which lipid bilayer (or multilayer) micro- and nanometric patches and rims are formed. The thickness of the bilayer structures is found to be ∼4.5 nm (or multiples of this value for multilayer structures), while the lateral dimensions range from micrometers to tens of nanometer depending on the lipid concentration. The force required to break a bilayer (breakthrough force) is found to be ∼0.24 nN. No dependence of the mechanical values on the lateral dimensions of the bilayer structures is evidenced. Remarkably, the thickness and breakthrough force values of the bilayers measured in dry environment are very similar to values reported in the literature for supported DOPC bilayers in pure water.

The object of this study was to assess the mucoadhesion of the three main commercially available types of pectin by atomic force microscopy (AFM) and surface Plasmon resonance (SPR). Polyacrylic acid and polyvinyl pyrrolidone were used as positive and negative control, respectively. Image analysis of the AFM scans revealed a significant change of roughness parameters when low-ester pectin was introduced to mica supported bovine submaxillarymucin, indicating a high mucoadhesion for this type of pectin. Only minor changes were observed with high-ester and amidated pectin. The same ranking order of adhesion affinity was confirmed by SPR. In conclusion, a high specific mucin interaction of pectin with a high charge density was demonstrated directly on a molecular scale without interference from the viscoelastic properties or the intra-molecular interactions between the polymer chains themselves, using two independent methods., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Lipid-bilayer membranes are formed by self-assembly processes. The molecular interactions within the bilayer and with the environment impart a unique trans-bilayer lateral pressure profile and provide a set of physical mechanisms for formation of lipid domains and laterally differentiated regions in the plane of the membrane. Results from a number of experimental and theoretical studies of model lipid bilayers are reviewed, emphasizing the significance of these fundamental physical properties for the structure and dynamics of biological membranes. Particular attention is paid to the relevance of postulating the existence of equilibrium thermodynamic phases in biological membranes. This includes a discussion of the possible significance of equilibrium critical points in biological membrane systems that normally exist under non-equilibrium conditions. The need for a new model to replace the celebrated Nicolson-Singer fluid-mosaic model of biological membranes is also discussed., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

We investigate the texture of gel (g) domains in binary lipid membranes composed of the phospholipids DPPC and DOPC. Lateral organization of lipid bilayer membranes is a topic of fundamental and biological importance. Whereas questions related to size and composition of fluid membrane domain are well studied, the possibility of texture in gel domains has so far not been examined. When using polarized light for two-photon excitation of the fluorescent lipid probe Laurdan, the emission intensity is highly sensitive to the angle between the polarization and the tilt orientation of lipid acyl chains. By imaging the intensity variations as a function of the polarization angle, we map the lateral variations of the lipid tilt within domains. Results reveal that gel domains are composed of subdomains with different lipid tilt directions. We have applied a Fourier decomposition method as a convenient way to analyze the angular intensity variations. Texture patterns of the same type have been associated with the presence of hexatic order in monolayers. The present results provide some support for the notion that hexatic order may persist in bilayers. Laurdan exhibits an emission spectral shift which correlates with the phase state of the membrane. This is quantified by the generalized polarization (GP) function, and we demonstrate that a GP analysis can be performed on supported membranes. The results show that although the gel domains have heterogeneous texture, the membrane phase state does not show spatial variation within each domain.

The composition of pulmonary surfactant membranes and films has evolved to support a complex lateral structure, including segregation of ordered/disordered phases maintained up to physiological temperatures. In this study, we have analyzed the temperature-dependent dynamic properties of native surfactant membranes and membranes reconstituted from two surfactant hydrophobic fractions (i.e., all the lipids plus the hydrophobic proteins SP-B and SP-C, or only the total lipid fraction). These preparations show micrometer-sized fluid ordered/disordered phase coexistence, associated with a broad endothermic transition ending close to 37 degrees C. However, both types of membrane exhibit uniform lipid mobility when analyzed by electron paramagnetic resonance with different spin-labeled phospholipids. A similar feature is observed with pulse-field gradient NMR experiments on oriented membranes reconstituted from the two types of surfactant hydrophobic extract. These latter results suggest that lipid dynamics are similar in the coexisting fluid phases observed by fluorescence microscopy. Additionally, it is found that surfactant proteins significantly reduce the average intramolecular lipid mobility and translational diffusion of phospholipids in the membranes, and that removal of cholesterol has a profound impact on both the lateral structure and dynamics of surfactant lipid membranes. We believe that the particular lipid composition of surfactant imposes a highly dynamic framework on the membrane structure, as well as maintains a lateral organization that is poised at the edge of critical transitions occurring under physiological conditions.

The fluorescent sterol dehydroergosterol (DHE) is often used as a marker for cholesterol in cellular studies. We show by vesicle fluctuation analysis that DHE has a lower ability than cholesterol to stiffen lipid bilayers suggesting less efficient packing with phospholipid acyl chains. Despite this difference, we found by fluorescence and atomic force microscopy, that DHE induces liquid-ordered/-disordered coexistent domains in giant unilamellar vesicles (GUVs) and supported bilayers made of dipalmitoylphosphatidylcholine (DPPC), dioleylphosphatidylcholine (DOPC) and DHE or cholesterol. DHE-induced phases have a height difference of 0.9-1 nm similar as known for cholesterol-containing domains. DHE not only promotes formation of liquid-liquid immiscibility but also shows strong partition preference for the liquid-ordered phase further supporting its suitability as cholesterol probe.

The nucleation and growth of solid domains in supported bilayers composed of a binary mixture of equimolar 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) have been studied using combined fluorescence microscopy and AFM. We have found that the formation of the DPPC-enriched solid domains occurs by a combination of homogeneous and heterogeneous nucleation and that the nucleation density is directly proportional to the cooling rate. Furthermore, during cooling the shape of the domains evolve from compact to a branched morphology. This suggests that the growth is controlled by the diffusion of DPPC from the liquid phase toward the solid domain interface. In the late stages of the growth, we observe that the size and overall shape of the domains depend on the position of the nucleation points relative to the surrounding nucleation point positions. To analyze this effect, the nucleation points were used as generators in a Voronoi construction. Associated with each generator is a Voronoi polygon that contains all points closer to this generator than to any other. Through a detailed quantitative analysis of the Voronoi cells and the domains, we have found that their area, orientation, and asymmetry correlate and that the correlation becomes stronger for larger domains. This means that the spatial distribution of the nucleation points regulate the domain shape.

An atomic force microscope and the colloidal probe technique are used to probe the interaction between a hydrophobic particle and a hydrophobic surface in water. The characteristics of the observed force curves strongly suggest that a gas bubble is formed when the particle is moved toward the surface and that the bubble ruptures when the particle subsequently is retracted from the surface. We demonstrate that this type of interaction is not unique for hydrophobic surfaces in water since the interaction between hydrophilic surfaces in air provides very similar force curves. However, the interaction between hydrophobic surfaces vanish if water is replaced by an organic solvent with low polarity. The bridging bubble model is employed to explain the hysteresis observed between approach and retraction force traces and experimental conditions where the hysteresis can be almost eliminated are identified. Finally, it is demonstrated that the hydrophobic interaction is strongly temperature dependent and this dependence can be attributed mainly to the decreasing solubility of air in water with increasing temperature.

Immobilization of DNA (encoding) on solid nanoparticles requires surface chemistry, which is well established for gold surfaces but often tedious and not generally applicable for many other inorganic surface materials. While substantial effort has been devoted to expanding surface chemistry techniques for solid nanoparticles, considerably less attention has been given to the development of noncovalent attachment of DNA to soft nanoparticles, like liposomes. Here we report a DNA-controlled assembly of liposomes in solution and on solid supported membranes, this process displays remarkably sharp thermal transitions from an assembled to a disassembled state, allowing application of DNA-controlled liposome assembly for the detection of polynucleotides (e.g., DNA) with single mismatch discrimination power. The method is based on a single DNA strand (contains two lipid membrane anchors), which is able to noncovalently attach to a liposome surface. This design enables detection of biological polynucleotide targets as the complementary strand can be unmodified DNA and RNA strands.