Search

Lagrangian particle dispersion models (LPDMs) have been used extensively to calculate source-receptor relationships (“footprints”) for use in applications such as greenhouse gas (GHG) flux inversions. Because a single model simulation is required for each data point, LPDMs do not scale well to applications with large data sets such as flux inversions using satellite observations. Here, we develop a proof-of-concept machine learning emulator for LPDM footprints over a ∼ 350 km × 230 km region around an observation point, and test it for a range of in situ measurement sites from around the world. As opposed to previous approaches to footprint approximation, it does not require the interpolation or smoothing of footprints produced by the LPDM. Instead, the footprint is emulated entirely from meteorological inputs. This is achieved by independently emulating the footprint magnitude at each grid cell in the domain using gradient-boosted regression trees with a selection of meteorological variables as inputs. The emulator is trained based on footprints from the UK Met Office's Numerical Atmospheric-dispersion Modelling Environment (NAME) for 2014 and 2015, and the emulated footprints are evaluated against hourly NAME output from 2016 and 2020. When compared to CH4 concentration time series generated by NAME, we show that our emulator achieves a mean R-squared score of 0.69 across all sites investigated between 2016 and 2020. The emulator can predict a footprint in around 10 ms, compared to around 10 min for the 3D simulator. This simple and interpretable proof-of-concept emulator demonstrates the potential of machine learning for LPDM emulation.

The production of chlorofluorocarbons (CFCs) that would ultimately be released to the atmosphere was banned globally in 2010 under the Montreal Protocol. Here we use measurements combined with an atmospheric transport model to show how atmospheric abundances and emissions of five CFCs increased between 2010 and 2020, contrary to the goals of the phase-out. The Montreal Protocol allows CFC production for use as a feedstock to produce other chemicals. Emissions of CFC-113a, CFC-114a and CFC-115 probably arise during the production of hydrofluorocarbons, which have replaced CFCs for many applications. The drivers behind increasing emissions of CFC-13 and CFC-112a are more uncertain. The combined emissions of CFC-13, CFC-112a, CFC-113a, CFC-114a and CFC-115 increased from 1.6 ± 0.2 to 4.2 ± 0.4 ODP-Gg yr-1 (CFC-11-equivalent ozone-depleting potential) between 2010 and 2020. The anticipated impact of these emissions on stratospheric ozone recovery is small. However, ongoing emissions of the five CFCs of focus may negate some of the benefits gained under the Montreal Protocol if they continue to rise. In addition, the climate impact of the emissions of these CFCs needs to be considered, as their 2020 emissions are equivalent to 47 ± 5 TgCO2.

We present a novel high-resolution inverse modelling system (“FLEXVAR”) based on FLEXPART-COSMO back trajectories driven by COSMO meteorological fields at 7 km×7 km resolution over the European COSMO-7 domain and the four-dimensional variational (4DVAR) data assimilation technique. FLEXVAR is coupled offline with the global inverse modelling system TM5-4DVAR to provide background mole fractions (“baselines”) consistent with the global observations assimilated in TM5-4DVAR. We have applied the FLEXVAR system for the inverse modelling of European CH4 emissions in 2018 using 24 stations with in situ measurements, complemented with data from five stations with discrete air sampling (and additional stations outside the European COSMO-7 domain used for the global TM5-4DVAR inversions). The sensitivity of the FLEXVAR inversions to different approaches to calculate the baselines, different parameterizations of the model representation error, different settings of the prior error covariance parameters, different prior inventories, and different observation data sets are investigated in detail. Furthermore, the FLEXVAR inversions are compared to inversions with the FLEXPART extended Kalman filter (“FLExKF”) system and with TM5-4DVAR inversions at 1∘×1∘ resolution over Europe. The three inverse modelling systems show overall good consistency of the major spatial patterns of the derived inversion increments and in general only relatively small differences in the derived annual total emissions of larger country regions. At the same time, the FLEXVAR inversions at 7 km×7 km resolution allow the observations to be better reproduced than the TM5-4DVAR simulations at 1∘×1∘. The three inverse models derive higher annual total CH4 emissions in 2018 for Germany, France, and BENELUX compared to the sum of anthropogenic emissions reported to UNFCCC and natural emissions estimated from the Global Carbon Project CH4 inventory, but the uncertainty ranges of top-down and bottom-up total emission estimates overlap for all three country regions. In contrast, the top-down estimates for the sum of emissions from the UK and Ireland agree relatively well with the total of anthropogenic and natural bottom-up inventories.

Production and consumption of CFC-11 (trichlorofluoromethane, CCl3F), CFC-12 (dichlorodifluoromethane, CCl2F2) and CCl4 (carbon tetrachloride) are controlled under the regulations of the Montreal Protocol and have been phased out globally since 2010. Only CCl4 is still widely produced as a chemical feedstock. After 2010, emissions of CFC-11 and CFC-12 should therefore mostly originate from existing banks (e.g. from foams, mobile air conditioning units and refrigerators); however evidence has emerged of an increase in global emissions of CFC-11 in the last decade, some of which has not been fully accounted for. The motivation for this work was to assess the emissions of CFC-11, CFC-12 and CCl4 from western Europe. All countries in this region have been subject to the controls of the Montreal Protocol since the late 1980s and, as non-Article 5 Parties, have been prohibited from producing CFCs and CCl4 for dispersive use since 1996. Four different inverse modelling systems are used to estimate emissions of these gases from 2008 to 2021 using data from four atmospheric measurement stations: Mace Head (Ireland), Jungfraujoch (Switzerland), Monte Cimone (Italy) and Tacolneston (UK). The average of the four model studies found that western European emissions of CFC-11, CFC-12 and CCl4 between 2008 and 2021 were declining at 3.5 % yr−1 (2.7 % yr−1–4.8 % yr−1), 7.7 % yr−1 (6.3 % yr−1–8.0 % yr−1) and 4.4 % yr−1 (2.6 % yr−1–6.4 % yr−1), respectively. Even though the emissions were declining throughout the period, the area including northern France, Belgium, the Netherlands and Luxembourg showed consistently elevated emissions of CFC-11 compared with the surrounding regions. Emissions of CFC-12 were slightly elevated in the same region. CCl4 emissions were the highest in the south of France. France had the highest emissions of all three gases over the period 2008–2021. Emissions from western Europe (2008–2021) were on average 2.4 ± 0.4 Gg (CFC-11), 1.3 ± 0.3 Gg (CFC-12) and 0.9 ± 0.2 Gg (CCl4). Our estimated decline in emissions of CFC-11 is consistent with a western European bank release rate of 3.4 % (2.6 %–4.5 %). This study concludes that emissions of CFC-11, CFC-12 and CCl4 have all declined from 2008 to 2021 in western Europe. Therefore, no evidence is found that western European emissions contributed to the unexplained part of the global increase in atmospheric concentrations of CFC-11 observed in the last decade.

Global emissions of the ozone depleting gas 1,1-dichloro-1-fluoroethane (HCFC-141b, CH3CCl2F), derived from measurements of atmospheric mole fractions, have been rising between 2017–2021 despite a fall in reported production and consumption for dispersive uses. This study evaluates the possible drivers behind this renewed rise in emissions. HCFC-141b is a controlled substance under the Montreal Protocol, and its phase-out is currently underway, after a peak in reported consumption and production in developing countries (Article 5) in 2013. If reported production and consumption are correct, it suggests that the 2017–2021 rise is due to an increase in emissions from the bank when HCFC-141b containing appliances reach the end of their life, or from production of HCFC-141b not reported for dispersive uses. Regional emissions have been estimated between 2017–2020 for all regions where measurements have sufficient sensitivity to emissions. This includes the regions of northwestern Europe, east Asia, the USA and Australia, where emissions decreased by a total of 1.6 ± 3.9 Gg yr−1, compared to a mean global increase of 3.0 ± 1.2 Gg yr−1 over the same period. Collectively these regions only account for around a third of global emissions in 2020. Therefore we are not able to pinpoint the source regions or specific activities responsible for the recent global emission rise.

The unique physical and chemical characteristics of radon make it an excellent tracer of atmospheric mixing and transport processes. As such, it has long been a species of interest to the climate change research communities. However, reliable, high resolution radon flux maps are essential for the use of atmospheric radon in climate studies.Validation of the existing radon flux maps and inventories is currently limited by the availability of systematic measurements of radon fluxes and other process-relevant parameters (e.g., physical characteristics and moisture content of soil). Localised measurements of radon flux, soil moisture and soil physical properties can provide some information to validate and improve flux maps. On the other hand, high sensitivity atmospheric radon measurements in conjunction with atmospheric transport models would determine the relative representativeness of radon flux models over larger scales.To tackle the validation of radon flux maps, atmospheric radon measurements were compared to the results of modelled radon concentrations calculated using the Lagrangian particle model, the Met Office Numerical Atmospheric Modelling Environment (NAME) and two available versions of European radon flux maps1. For this purpose, radon data from three UK greenhouse gases atmospheric monitoring stations located in Heathfield (an inland, 100 m tall tower), Tacolneston (an inland, 185 m tall tower), and Weybourne (a coastal site, 10 m tower) were used. The differences between measured and modelled radon concentrations on diurnal and monthly scales will be presented and discussed. The ratio of measured-modelled radon concentrations shows the potential to objectively assess the reliability of radon flux maps under different wind directions and atmospheric mixing conditions. 1 2015: doi:10.1594/PANGAEA.854715 and 2022: ICOS data search (icos-cp.eu).

The vertical mixing state of the atmosphere, as well as the atmospheric boundary layer (ABL) height, are important atmospheric transport model parameters for the accurate simulation of greenhouse gas concentrations. In order to use tall tower greenhouse gas measurements to quantify regional scale emissions (top-down, inverse estimates) an estimate of the atmospheric transport model uncertainty across the time series of study is needed. Several methods have been used to estimate this, often relying on arbitrary thresholds or a combination of parameters (such as vertical gradients if a gas is measured at multiple points). Here we study if radon has potential as an independent measurement to assess model uncertainty.Radon is a radioactive noble gas present in our atmosphere and is a good tracer of mixing processes in the ABL due to its properties. Hence, measurements of atmospheric radon concentration can provide useful insights into the vertical mixing state of the atmosphere, and in turn may help to calibrate and validate atmospheric dispersion models.In this study, we use high temporal resolution atmospheric measurements of radon and CH4 from four tall tower sites in the UK, which are part of the Deriving Emissions linked to Climate Change (DECC) network: Heathfield (HFD), Ridge Hill (RGH), Tacolneston (TAC) and Weybourne (WAO). At each site, CH4 is measured at two or three different heights, while radon is measured at one height.To determine a metric whereby single-height measurements of radon can provide a proxy for vertical mixing states, we compare the diurnal cycle of the measured radon concentration with the modelled radon (calculated by the Met Office Numerical Atmospheric Modelling Environment (NAME) dispersion model and radon flux maps). The largest uncertainties are shown to be before sunrise and after sunset right before the inversion layer was formed/destroyed. The diurnal CH4 vertical gradient at these times is also compared with the modelled CH4 vertical gradient.

Emissions of the potent greenhouse gas perfluorocyclobutane (c-C4F8, PFC-318, octafluorocyclobutane) into the global atmosphere inferred from atmospheric measurements have been increasing sharply since the early 2000s. We find that these inferred emissions are highly correlated with the production of hydrochlorofluorocarbon-22 (HCFC-22, CHClF2) for feedstock (FS) uses, because almost all HCFC-22 FS is pyrolyzed to produce (poly)tetrafluoroethylene ((P)TFE) and hexafluoropropylene (HFP), a process in which c-C4F8 is a known by-product, causing a significant fraction of global c-C4F8 emissions. We find a global emission factor of ∼0.003 kg c-C4F8 per kilogram of HCFC-22 FS pyrolyzed. Mitigation of these c-C4F8 emissions, e.g., through process optimization, abatement, or different manufacturing processes, such as refined methods of electrochemical fluorination and waste recycling, could reduce the climate impact of this industry. While it has been shown that c-C4F8 emissions from developing countries dominate global emissions, more atmospheric measurements and/or detailed process statistics are needed to quantify c-C4F8 emissions at country to facility levels.

Trifluoromethane (CHF3, HFC-23), one of the most potent greenhouse gases among HFCs, is mainly emitted to the atmosphere as a by-product in the production of the ozone depleting legacy refrigerant and chemical feedstock chlorodifluoromethane (CHClF2, HCFC-22). A recent study on global HFC-23 emissions (Stanley et al., 2020) showed significant discrepancies over 2014–2017 between the increase in the observation-derived (top-down) emissions and the 87 % emission reduction expected from capture and destruction processes of HFC-23 at HCFC-22 production facilities mandated by national phase-out plans (bottom-up). However, the actual sources of the increased emissions were not identified. Here, we estimate the regional top-down emissions of HFC-23 for East Asia based on in situ measurements at Gosan, South Korea, and show that the HFC-23 emissions from eastern China have increased from 5.0 ± 0.4 Gg yr-1 in 2008 to 9.5 ± 1.0 Gg yr-1 in 2019. The continuous rise was contrary to the large emissions reduction reported since 2015 under the Chinese hydrochlorofluorocarbons production phase-out management plan (HPPMP). The magnitude of the mismatch between top-down and bottom-up estimates for 2015–2019 in eastern China was ~23.7 ± 3.6 Gg, which accounts for 47 ± 11 % of the global mismatch. Given the location of HCFC-22 production plants in eastern China and the fraction of regional to global HCFC-22 production capacities, the HFC-23 emissions rise in eastern China is most likely associated with known HCFC-22 production facilities and thus, observed discrepancies between top-down and bottom-up emissions could be attributed to unsuccessful factory level HFC-23 abatement and inaccurate quantification of emission reductions.

Our urban measurement found that recreational use became an unnecessary anthropogenic source of N2O, and that the UK emission inventory provided a significant underestimate of this source.

The precise measurement of the amount fraction of atmospheric nitrous oxide (N2O) is required to understand global emission trends. Analysis of the site-specific stable isotopic composition of N2O provides a means to differentiate emission sources. The availability of accurate reference materials of known N2O amount fractions and isotopic composition is critical for achieving these goals. We present the development of nitrous oxide gas reference materials for underpinning measurements of atmospheric composition and isotope ratio. Uncertainties target the World Metrological Organisation Global Atmosphere Watch (WMO-GAW) compatibility goal of 0.1 nmol mol−1 and extended compatibility goal of 0.3 nmol mol−1, for atmospheric N2O measurements in an amount fraction range of 325–335 nmol mol−1. We also demonstrate the stability of amount fraction and isotope ratio of these reference materials and present a characterisation study of the cavity ring-down spectrometer used for analysis of the reference materials.

National greenhouse gas inventories (GHGIs) are submitted annually to the United Nations Framework Convention on Climate Change (UNFCCC). They are estimated in compliance with Intergovernmental Panel on Climate Change (IPCC) methodological guidance using activity data, emission factors and facility-level measurements. For some sources, the outputs from these calculations are very uncertain. Inverse modelling techniques that use high-quality, long-term measurements of atmospheric gases have been developed to provide independent verification of national GHGIs. This is considered good practice by the IPCC as it helps national inventory compilers to verify reported emissions and to reduce emission uncertainty. Emission estimates from the InTEM (Inversion Technique for Emission Modelling) model are presented for the UK for the hydrofluorocarbons (HFCs) reported to the UNFCCC (HFC-125, HFC-134a, HFC-143a, HFC-152a, HFC-23, HFC-32, HFC-227ea, HFC-245fa, HFC-43-10mee and HFC-365mfc). These HFCs have high global warming potentials (GWPs), and the global background mole fractions of all but two are increasing, thus highlighting their relevance to the climate and a need for increasing the accuracy of emission estimation for regulatory purposes. This study presents evidence that the long-term annual increase in growth of HFC-134a has stopped and is now decreasing. For HFC-32 there is an early indication, its rapid global growth period has ended, and there is evidence that the annual increase in global growth for HFC-125 has slowed from 2018. The inverse modelling results indicate that the UK implementation of European Union regulation of HFC emissions has been successful in initiating a decline in UK emissions from 2018. Comparison of the total InTEM UK HFC emissions in 2020 with the average from 2009–2012 shows a drop of 35 %, indicating progress toward the target of a 79 % decrease in sales by 2030. The total InTEM HFC emission estimates (2008–2018) are on average 73 (62–83) % of, or 4.3 (2.7–5.9) Tg CO2-eq yr−1 lower than, the total HFC emission estimates from the UK GHGI. There are also significant discrepancies between the two estimates for the individual HFCs.

Nitrous oxide is a potent greenhouse gas (GHG) and ozone-depleting substance, whose atmospheric abundance has risen throughout the contemporary record. In this work, we carry out the first global hierarchical Bayesian inversion to solve for nitrous oxide emissions, which includes prior emissions with truncated Gaussian distributions and Gaussian model errors, in order to examine the drivers of the atmospheric surface growth rate. We show that both emissions and climatic variability are key drivers of variations in the surface nitrous oxide growth rate between 2011 and 2020. We derive increasing global nitrous oxide emissions, which are mainly driven by emissions between 0 and 30∘ N, with the highest emissions recorded in 2020. Our mean global total emissions for 2011–2020 of 17.2 (16.7–17.7 at the 95 % credible intervals) Tg N yr−1, comprising of 12.0 (11.2–12.8) Tg N yr−1 from land and 5.2 (4.5–5.9) Tg N yr−1 from ocean, agrees well with previous studies, but we find that emissions are poorly constrained for some regions of the world, particularly for the oceans. The prior emissions used in this and other previous work exhibit a seasonal cycle in the extra-tropical Northern Hemisphere that is out of phase with the posterior solution, and there is a substantial zonal redistribution of emissions from the prior to the posterior. Correctly characterizing the uncertainties in the system, for example in the prior emission fields, is crucial for deriving posterior fluxes that are consistent with observations. In this hierarchical inversion, the model-measurement discrepancy and the prior flux uncertainty are informed by the data, rather than solely through “expert judgement”. We show cases where this framework provides different plausible adjustments to the prior fluxes compared to inversions using widely adopted, fixed uncertainty constraints.

Perfluorocarbons (PFCs) are amongst the most potent greenhouse gases listed under the United Nations Framework Convention on Climate Change (UNFCCC). With atmospheric lifetimes in the order of thousands to tens of thousands of years, PFC emissions represent a permanent alteration to the global atmosphere on human timescales. While the industries responsible for the vast majority of these emissions – aluminium smelting and semi-conductor manufacturing – have made efficiency improvements and introduced abatement measures, the global mean mole fractions of three PFCs, namely tetrafluoromethane (CF4, PFC-14), hexafluoroethane (C2F6, PFC-116) and octafluoropropane (C3F8, PFC-218), continue to grow. In this study, we update baseline growth rates using in-situ high-frequency measurements from the Advanced Global Atmospheric Gases Experiment (AGAGE) and, using data from four European stations, estimate PFC emissions for northwest Europe. The global growth rate of CF4 decreased from 1.3 ppt yr−1 in 1979 to 0.6 ppt yr−1 around 2010 followed by a renewed steady increase to 0.9 ppt yr−1 in 2018. For C2F6, the growth rate grew to a maximum of 0.125 ppt yr−1 around 1999, followed by a decline to a minimum of 0.075 ppt yr−1 in 2009, followed by weak growth thereafter. The C3F8 growth rate was around 0.007 ppt yr−1 until the early 1990s and then quickly grew to a maximum of 0.03 ppt yr−1 in 2003/04. Following a period of decline until 2012 to 0.015 ppt yr−1, the growth rate slowly increased again to ~ 0.017 ppt yr−1 in 2019. Unlike CF4 (and to a lesser extent C2F6), we observed no clear minimum associated with the 2008 financial crisis for C3F8. We used an inverse modelling framework to infer PFC emissions for northwest Europe. No statistically significant trend in regional emissions was observed for any of the PFCs assessed. For CF4, European emissions in early years were linked predominantly to the aluminium industry. However, we link large emissions in recent years to a chemical manufacturer in northwest Italy. Emissions of C2F6 are linked to a range of sources, including a semi-conductor manufacturer in Ireland and a cluster of smelters in Germany's Ruhr valley. In contrast, northwest European emissions of C3F8 are dominated by a single source in northwest England, raising the possibility of using emissions from this site for a tracer release experiment.

We present a novel high-resolution inverse modelling system ("FLEXVAR") based on FLEXPART-COSMO back trajectories driven by COSMO meteorological fields at 7 km × 7 km resolution over the European COSMO-7 domain and the four-dimensional variational (4DVAR) data assimilation technique. FLEXVAR is coupled offline with the global inverse modelling system TM5-4DVAR to provide background mole fractions ("baselines") consistent with the global observations assimilated in TM5-4DVAR. We have applied the FLEXVAR system for the inverse modelling of European emissions in 2018 using 24 stations with in situ measurements, complemented with data from five stations with discrete air sampling (and additional stations outside the European COSMO-7 domain used for the global TM5-4DVAR inversions). The sensitivity of the FLEXVAR inversions to different approaches to calculate the baselines, different parameterizations of the model representation error, different settings of the prior error covariance parameters, different prior inventories and different observation data sets are investigated in detail. Furthermore, the FLEXVAR inversions are compared to inversions with the FLEXPART extended Kalman filter ("FLExKF") system and with TM5-4DVAR inversions at 1° × 1° resolution over Europe. The three inverse modelling systems show overall good consistency of the major spatial patterns of the derived inversion increments and in general only relatively small differences in the derived annual total emissions of larger country regions. At the same time, the FLEXVAR inversions at 7 km × 7 km resolution allow to better reproduce the observations than the TM5 4DVAR simulations at 1° × 1°. The three inverse models derive higher annual total CH4 emissions in 2018 for Germany, France and BENELUX compared to the sum of anthropogenic emissions reported to UNFCCC and natural emissions estimated from the Global Carbon Project CH4 inventory, but the uncertainty ranges of top-down and bottom-up total emission estimates overlap for all three country regions. In contrast, the top-down estimates for the sum of emissions from the United Kingdom and Ireland agree relatively well with the total of anthropogenic and natural bottom-up inventories.

We report a 40-year history of SF6 atmospheric mole fractions measured at the Advanced Global Atmospheric Gases Experiment (AGAGE) monitoring sites, combined with archived air samples, to determine emission estimates from 1978 to 2018. Previously we reported a global emission rate of 7.3±0.6 Gg yr−1 in 2008 and over the past decade emissions have continued to increase by about 24 % to 9.04±0.35 Gg yr−1 in 2018. We show that changing patterns in SF6 consumption from developed (Kyoto Protocol Annex-1) to developing countries (non-Annex-1) and the rapid global expansion of the electric power industry, mainly in Asia, have increased the demand for SF6-insulated switchgear, circuit breakers, and transformers. The large bank of SF6 sequestered in this electrical equipment provides a substantial source of emissions from maintenance, replacement, and continuous leakage. Other emissive sources of SF6 occur from the magnesium, aluminium, and electronics industries as well as more minor industrial applications. More recently, reported emissions, including those from electrical equipment and metal industries, primarily in the Annex-1 countries, have declined steadily through substitution of alternative blanketing gases and technological improvements in less emissive equipment and more efficient industrial practices. Nevertheless, there are still demands for SF6 in Annex-1 countries due to economic growth, as well as continuing emissions from older equipment and additional emissions from newly installed SF6-insulated electrical equipment, although at low emission rates. In addition, in the non-Annex-1 countries, SF6 emissions have increased due to an expansion in the growth of the electrical power, metal, and electronics industries to support their continuing development. There is an annual difference of 2.5–5 Gg yr−1 (1990–2018) between our modelled top-down emissions and the UNFCCC-reported bottom-up emissions (United Nations Framework Convention on Climate Change), which we attempt to reconcile through analysis of the potential contribution of emissions from the various industrial applications which use SF6. We also investigate regional emissions in East Asia (China, S. Korea) and western Europe and their respective contributions to the global atmospheric SF6 inventory. On an average annual basis, our estimated emissions from the whole of China are approximately 10 times greater than emissions from western Europe. In 2018, our modelled Chinese and western European emissions accounted for ∼36 % and 3.1 %, respectively, of our global SF6 emissions estimate.

The Arctic is one of the most rapidly warming regions of the Earth, with predicted temperature increases of 5–7 ∘C and the accompanying extensive retreat of Arctic glacial systems by 2100. Retreating glaciers will reveal new land surfaces for microbial colonisation, ultimately succeeding to tundra over decades to centuries. An unexplored dimension to these changes is the impact upon the emission and consumption of halogenated organic compounds (halocarbons). Halocarbons are involved in several important atmospheric processes, including ozone destruction, and despite considerable research, uncertainties remain in the natural cycles of some of these compounds. Using flux chambers, we measured halocarbon fluxes across the glacier forefield (the area between the present-day position of a glacier's ice-front and that at the last glacial maximum) of a high-Arctic glacier in Svalbard, spanning recently exposed sediments (

Global concentrations (or mole fractions) and emissions of ozone-depleting substances (ODSs) and their hydrofluorocarbon (HFCs) substitutes that are controlled by the Montreal Protocol and its Amendments and adjustments (MP) are of great interest to both the scientific community and public. Previous studies on global concentrations and emissions have mostly relied on ground-based observations. Here, we assess the global concentrations and emissions of eight MP controlled substances and methyl chloride from ACE-FTS (Atmospheric Chemistry Experiment high-resolution infrared Fourier transform spectrometer) satellite observations: CFC-11 (CFCl

Emissions of the potent greenhouse gas perfluorocyclobutane (c-C4F8, PFC-318, octafluorocyclobutane) into the global atmosphere inferred from atmospheric measurements have been increasing sharply since the early 2000s. We find that these inferred emissions are highly correlated with the production of hydrochlorofluorocarbon-22 (HCFC-22, CHClF2) for feedstock (FS) uses, because almost all HCFC-22 FS is pyrolyzed to produce (poly)tetrafluoroethylene ((P)TFE, Teflon) and hexafluoropropylene (HFP), a process in which c-C4F8 is a known by-product, causing a significant fraction of global c-C4F8 emissions. We find a global emission factor of ~0.003 kg c-C4F8 per kg of HCFC-22 FS pyrolyzed. Mitigation of these c-C4F8 emissions, e.g., through process optimization, abatement, or different manufacturing processes, such as electrochemical fluorination, could reduce the climate impact of this industry. While it has been shown that c-C4F8 emissions from developing countries dominate global emissions, more atmospheric measurements and/or detailed process statistics are needed to quantify country to facility level c-C4F8 emissions.

Methyl bromide (CH3Br) is a potent ozone-depleting substance (ODS) that has both natural and anthropogenic sources. CH3Br has been used mainly for preplant soil fumigation, post-harvest grain and timber fumigation, and structural fumigation. Most non-quarantine and pre-shipment (non-QPS) uses were phased out by 2005 for non-Article 5 (developed) countries and by 2015 for Article 5 (developing) countries under the Montreal Protocol on Substances that Deplete the Ozone Layer; some uses have continued under critical-use exemptions (CUEs). Under the protocol, individual nations are required to report annual data on CH3Br production and consumption for quarantine–pre-shipment (QPS) uses, non-QPS uses, and CUEs to the United Nations Environment Programme (UNEP). In this study, we analyzed high-precision, in situ measurements of atmospheric mole fractions of CH3Br obtained at the Gosan station on Jeju Island, South Korea, from 2008 to 2019. The background mole fractions of CH3Br in the atmosphere at Gosan declined from 8.5±0.8 ppt (parts per trillion) in 2008 to 7.4±0.6 ppt in 2019 at a rate of -0.13±0.02 ppt yr−1. At Gosan, we also observed periods of persistent mole fractions (pollution events) elevated above the decreasing background in continental air masses from China. Statistical back-trajectory analyses showed that these pollution events are predominantly traced back to CH3Br emissions from eastern China. Using an interspecies correlation (ISC) method with the reference trace species CFC-11 (CCl3F), we estimate anthropogenic CH3Br emissions from eastern China at an average of 4.1±1.3 Gg yr−1 in 2008–2019, approximately 2.9±1.3 Gg yr−1 higher than the bottom-up emission estimates reported to UNEP. Possible non-fumigation CH3Br sources – rapeseed production and biomass burning – were assessed, and it was found that the discrepancy is most likely due to unreported or incorrectly reported QPS and non-QPS fumigation uses. These unreported anthropogenic emissions of CH3Br are confined to eastern China and account for 30 %–40 % of anthropogenic global CH3Br emissions. They are likely due to delays in the introduction of CH3Br alternatives, such as sulfuryl fluoride (SO2F2), heat, and irradiation, and a possible lack of industry awareness of the need for regulation of CH3Br production and use.

We present a method for estimating fossil fuel methane emissions using observations of methane and ethane, accounting for uncertainty in their emission ratio. The ethane:methane emission ratio is incorporated as a spatially and temporally variable parameter in a Bayesian model, with its own prior distribution and uncertainty. We find that using an emission ratio distribution mitigates bias from using a fixed, potentially incorrect emission ratio and that uncertainty in this ratio is propagated into posterior estimates of emissions. A synthetic data test is used to show the impact of assuming an incorrect ethane:methane emission ratio and demonstrate how our variable parameter model can better quantify overall uncertainty. We also use this method to estimate UK methane emissions from high-frequency observations of methane and ethane from the UK Deriving Emissions linked to Climate Change (DECC) network. Using the joint methane–ethane inverse model, we estimate annual mean UK methane emissions of approximately 0.27 (95 % uncertainty interval 0.26–0.29) Tg yr−1 from fossil fuel sources and 2.06 (1.99–2.15) Tg yr−1 from non-fossil fuel sources, during the period 2015–2019. Uncertainties in UK fossil fuel emissions estimates are reduced on average by 15 % and up to 35 % when incorporating ethane into the inverse model, in comparison to results from the methane-only inversion.

Hydrochlorofluorocarbons (HCFCs) are used as temporary substitutes for chlorofluorocarbons and other ozone-depleting substances because they have reduced ozone depletion and global warming potentials. The consumption and production of HCFCs are regulated via the Montreal Protocol and its amendments till 2013, with a complete phase-out being scheduled by 2030 for Article 5 parties (developing countries). To better understand the characteristics and emissions of HCFCs in the Yangtze River Delta (YRD), which is the largest metropolitan area in China, weekly flask samples were collected at the Lin'an regional background station located in the YRD from 2011 to 2018 and measured for four HCFCs (HCFC-22, HCFC-141b, HCFC-142b, and HCFC-124). The HCFC-132b and HCFC-133a measurements began in 2018. The ambient mixing ratios of the HCFCs exhibited higher concentrations and larger variabilities than those at the Shangri-la regional background station at similar latitudes in southwest China. The HCFC emissions in the YRD were estimated based on the tracer ratio method using CO and HFC-134a as tracers, and were comparable within the uncertainties. Our results are generally consistent with previous estimates obtained using top-down approaches. HCFC-22 and HCFC-141b contributed 52% ± 23% and 41% ± 24% of the total ODP-weighted (CFC-11-equivalent) HCFC emissions from the YRD, respectively, whereas HCFC-22 contributed the most (83% ± 36%) to the total CO

Halocarbons are emitted by various anthropogenic activities to the atmosphere, where they contribute to global warming and stratospheric ozone-depletion. To determine national halocarbon emissions, the so-called "top-down" approach relies on atmospheric observations, at sites that reflect emissions on a country level, and com-bines these observations with inverse modelling methods. In this study, we present 12 months (September 2019 to September 2020) of continuous atmospheric observations of 28 halocarbons from a measurement campaign at the Beromünster tall tower in Switzerland. The site is sensitive to the most densely populated area of Switzer-land, the Swiss Plateau, thus the measurements were well suited to derive Swiss halocarbon emissions. Emissions were calculated by two different top-down methods, a tracer-ratio method (TRM) with carbon monoxide (CO) as the independent tracer, and a Bayesian inversion (BI), based on atmospheric transport simulations using FLEXPART–COSMO. The results were compared to previously reported top-down emission estimates, based on measurements at the high-Alpine site Jungfraujoch, and to the "bottom-up" Swiss national greenhouse gas (GHG) inventory, as annually reported to the United Nations Framework Convention on Climate Change (UN-FCCC). We observed ongoing outgassing from existing foams and refrigerators for the ozone-depleting, banned chlorofluorocarbons (CFCs) and the regulated hydrochlorofluorocarbons (HCFCs), confirming their large historical use. For the major hydrofluorocarbons (HFCs) HFC-125 (CHF2CF3) and HFC-32 (CH2F2), our calcu-lated emissions of 99 ± 29 Mg yr−1 and 46 ± 13 Mg yr−1 were in good agreement with the national Swiss inventory values, whereas for HFC 134a (CH2FCF3) our result of 300 ± 85 Mg yr−1 was about 30 % lower than the UNFCCC reported value. For the other investigated HFCs, perfluorocarbons (PFCs), SF6 and NF3, emissions were small and in agreement with the inventory. Finally, we report the first country-based emission estimates of a total of 50 Mg yr−1 for three recently phased-in, unregulated hydrofluoroolefins (HFOs), HFO 1234yf (CF3CF=CH2), HFO-1234ze(E) ((E)-CF3CH=CHF) and HCFO-1233zd(E) ((E) CF3CH=CHCl).

Atmospheric measurements can be used as a tool to evaluate national greenhouse gas inventories through inverse modelling. Using eight years of continuous methane (CH4) concentration data, this work assesses the United Kingdom's (UK) CH4 emissions over the period 2013–2020. Using two different inversion methods, we find mean emissions of 2.10 ± 0.09 Tg yr−1 and 2.12 ± 0.26 Tg yr−1 between 2013–2020, and an overall trend of −0.05 ± 0.01 Tg yr−2 and −0.06 ± 0.04 Tg yr−2, a 2–3 % decrease each year. This compares with the mean emissions of 2.23 Tg yr−1 and trend of −0.03 Tg yr−2 (1 % annual decrease) reported in the UK's 2021 inventory between 2013–2019. We examine how sensitive these estimates are to various components of the inversion set-up, such as the measurement network configuration, the prior emissions estimate, the inversion method, and the atmospheric transport model used. We find the decreasing trend to be due primarily to a reduction of emissions from England, which accounts for 70 % of the UK CH4 emissions. Comparisons during 2015 demonstrate consistency when different atmospheric transport models are used to map the relationship between sources and atmospheric observations at the aggregation level of the UK. The posterior annual national means and negative trend are found to be consistent across changes in network configuration. We show, using only two monitoring sites, the same conclusions on mean UK emissions and negative trend would be reached as using the full six-site network, albeit with larger posterior uncertainties. However, emissions estimates from Scotland fail to converge on the same posterior under different inversion setups, highlighting a shortcoming of the current observation network in monitoring all of the UK. Although CH4 emissions in 2020 are estimated to have declined relative to previous years, this decrease is in line with the longer-term emissions trend, and is not necessarily a response to national lockdowns.