Search

Understanding and controlling peptide foldamer conformation in phospholipid bilayers is a key step toward their use as molecular information relays in membranes. To this end, a new

Oxime formation is a convenient one-step method for ligating reducing sugars to surfaces, producing a mixture of closed ring α- and β-anomers along with open-chain (E)- and (Z)-isomers. Here we show that despite existing as a mixture of isomers, N-acetylglucosamine (GlcNAc) oximes can still be substrates for β(1,4)-galactosyltransferase (β4GalT1). β4GalT1 catalysed the galactosylation of GlcNAc oximes by a galactose donor (UDP-Gal) both in solution and in situ on the surface of liposomes, with conversions up to 60% in solution and ca. 15-20% at the liposome surface. It is proposed that the β-anomer is consumed preferentially but long reaction times allow this isomer to be replenished by equilibration from the remaining isomers. Adding further enzymes gave more complex oligosaccharides, with a combination of α-1,3-fucosyltransferase, β4GalT1 and the corresponding sugar donors providing Lewis X coated liposomes. However, sialylation using T. cruzi trans-sialidase and sialyllactose provided only very small amounts of sialyl Lewis X (sLex) capped lipid. These observations show that combining oxime formation with enzymatic elaboration will be a useful method for the high-throughput surface modification of drug delivery vehicles, such as liposomes, with cell-targeting oligosaccharides.

To investigate how remotely induced changes in ligand folding might affect catalysis by organometallic complexes, dynamic α-amino-iso-butyric acid (Aib) peptide foldamers bearing rhodium(I) N-heterocyclic carbene (NHC) complexes have been synthesised and studied. X-ray crystallography of a foldamer with an N-terminal azide and a C-terminal Rh(NHC)(Cl)(diene) complex showed a racemate with a chiral axis in the Rh(NHC) complex and a distorted 310 helical body. Replacing the azide with either one or two chiral Lα-methylvaline (L-αMeVal) residues gave diastereoisomeric foldamers that each possessed point, helical and axial chirality. NMR spectroscopy revealed an unequal ratio of diastereoisomers for some foldamers, indicating that the chiral conformational preference of the N-terminal residue(s) was relayed down the 1 nm helical body to the axially chiral Rh(NHC) complex. Although the remote chiral residue(s) did not affect the stereoselectivity of hydrosilylation reactions catalysed by these foldamers, these studies suggest a potential pathway towards remote conformational control of organometallic catalysts.

Amino acids modified with an N-terminal anthracene group self-assemble into supramolecular hydrogels upon the addition of a range of salts or cell culture medium. Gel-phase photo-dimerisation of gelators results in hydrogel disassembly and was used to recover cells from 3D culture.

The increase in resistant bacterial strains necessitates the identification of new antimicrobial molecules. Antimicrobial peptides (AMPs) are an attractive option because of evidence that bacteria cannot easily develop resistance to AMPs. The peptaibols, a class of naturally occurring AMPs, have shown particular promise as antimicrobial drugs, but their development has been hindered by their mechanism of action not being clearly understood. To explore how peptaibols might interact with membranes, circular dichroism, vibrational circular dichroism, linear dichroism, Raman spectroscopy, Raman optical activity, neutron reflectivity and molecular dynamics simulations have been used to study a small library of peptaibol mimics, the Aib‐rich peptides. All the peptides studied quickly partitioned and oriented in membranes, and we found evidence of chiral interactions between the phospholipids and membrane‐embedded peptides. The protocols presented in this paper open new ground by showing how chiro‐optical spectroscopies can throw light on the mechanism of action of AMPs., Sit up or lie down: Linear dichroism, circular dichroism and Raman spectroscopy, neutron reflectivity and molecular dynamics simulations have been used to explore how mimics of peptaibol antibiotics (Aib foldamers) interact with membranes. These studies revealed all peptides partitioned well into the bilayers, with orientation dependent upon peptide length, as well as chiral interactions between peptides and the phospholipids.

A library of closely related diacetylenes has been synthesised, comprising docosa-10,12-diynediamides with small n-alkyl or cycloalkyl substituents on the termini. Colour changes of these solids in response to ultraviolet (UV) radiation and heating were analysed using a range of analytical techniques, including UV–visible/near-infrared reflectance, hand-held Raman and solid-state nuclear magnetic resonance (ssNMR) spectroscopies. Colorimetric studies showed that this class of diacetylene undergoes clear colour changes that are very sensitive to even small alterations in molecular structure. The colour change transitions of diacetylenes bearing either cyclopentyl or cyclohexyl substituents were more similar to each other than to those of analogous diacetylenes bearing either n-pentyl or n-hexyl substituents. Differential scanning calorimetry (DSC) also reflected these differences, with the cycloalkyl substituted diacetylenes showing endothermic transitions at significantly higher temperatures than both acyclic analogues. From this library, an n-hexyl substituted diacetylene shows the greatest potential as a colour change pigment, with three distinct colours that are stable at room temperature (white, blue, red), as well as an unstable yellow colour at elevated temperatures.

Synthetic signal transduction is an exciting new research field that applies supramolecular chemistry in a membrane environment to provide insight into the physical processes involved in natural signal transduction and to open new opportunities in synthetic biology, for example the integration of artificial signaling pathways into cells. Although it is still a developing field, we discuss a selection of recent stimuli-responsive supramolecular constructs that, when embedded in the phospholipid bilayer, can mimic aspects of the behavior of different natural signaling proteins, including ligand-gated ion channels, G-protein coupled receptors and receptor tyrosine kinases. The lipid bilayer plays a key part in these biomimetic systems, as this complex anisotropic environment provides challenges both when designing supramolecular systems that function in the bilayer and when analyzing the data they provide. Nonetheless these recent studies have provided key insights into how the bilayer affects binding to, the conformation of, and catalysis by membrane-embedded supramolecular constructs. If successful, these model systems promise to be key components for bottom-up synthetic biology, the creation of artificial cells and devices starting from molecular components.

A (FeII)6-coordinated triply interlocked (“Star of David”) [2]catenane (612 link) and a (FeII)5-coordinated pentafoil (51) knot are found to selectively transport anions across phospholipid bilayers. Allostery, topology, and building block stoichiometry all play important roles in the efficacy of the ionophoric activity. Multiple FeII cation coordination by the interlocked molecules is crucial: the demetalated catenane exhibits no anion binding in solution nor any transmembrane ion transport properties. However, the topologically trivial, Lehn-type cyclic hexameric FeII helicates—which have similar anion binding affinities to the metalated Star of David catenane in solution—also display no ion transport properties. The unanticipated difference in behavior between the open- and closed-loop structures may arise from conformational restrictions in the linking groups that likely enhances the rigidity of the channel-forming topologically complex molecules. The (FeII)6-coordinated Star of David catenane, derived from a hexameric cyclic helicate, is 2 orders of magnitude more potent in terms of ion transport than the (FeII)5-coordinated pentafoil knot, derived from a cyclic pentamer of the same building block. The reduced efficacy is reminiscent of multisubunit protein ion channels assembled with incorrect monomer stoichiometries.

Triazole-capped α-aminoisobutyric acid (Aib) octameric foldamers formed very active ion channels in phospholipid bilayers after the addition of copper(ii) chloride, with activity “turned off” by copper(ii) extraction., Synthetic ion channels may have applications in treating channelopathies and as new classes of antibiotics, particularly if ion flow through the channels can be controlled. Here we describe triazole-capped octameric α-aminoisobutyric acid (Aib) foldamers that “switch on” ion channel activity in phospholipid bilayers upon copper(ii) chloride addition; activity is “switched off” upon copper(ii) extraction. X-ray crystallography showed that CuCl2 complexation gave chloro-bridged foldamer dimers, with hydrogen bonds between dimers producing channels within the crystal structure. These interactions suggest a pathway for foldamer self-assembly into membrane ion channels. The copper(ii)-foldamer complexes showed antibacterial activity against B. megaterium strain DSM319 that was similar to the peptaibol antibiotic alamethicin, but with 90% lower hemolytic activity.

A crystallographically characterised zinc(ii)-capped foldamer can sense the enantiomeric excess of scalemic carboxylate solutions, including those produced by enantioselective organocatalysis, and can relay this input signal along the foldamer body to a remote glycinamide group, which then provides an NMR spectroscopic output.

Helical α-aminoisobutyric acid (Aib) foldamers show great potential as devices for the communication of conformational information across phospholipid bilayers, but determining their conformation in bilayers remains a challenge. In the present study, Raman, Raman optical activity (ROA), infrared (IR) and vibrational circular dichroism (VCD) spectroscopies have been used to analyze the conformational preferences of Aib foldamers in solution and when interacting with bilayers. A 310 -helix marker band at 1665-1668 cm-1 in Raman spectra was used to show that net helical content increased strongly with oligomer length. ROA and VCD spectra of chiral Aib foldamers provided the chiroptical signature for both left- and right-handed 310 -helices in organic solvents, with VCD establishing that foldamer screw-sense was preserved when the foldamers became embedded within bilayers. However, the population distribution between different secondary structures was perturbed by the chiral phospholipid. These studies indicate that ROA and VCD spectroscopies are valuable tools for the study of biomimetic structures, such as artificial signal transduction molecules, in phospholipid bilayers.

β(1,4)-Galactosyltransferase (β4Gal-T1) and T. cruzi trans-sialidase (TcTS) have been used in a ‘one-pot’ cascade to provide vesicles (liposomes) with a trisaccharide coating. These soluble enzymes catalysed the transfer of galactose then sialic acid onto a synthetic N-acetylglucolipid embedded in the bilayers. Clustering of this substrate into microdomains increased the rate of sialylated lipid production, showing that an increase in β4Gal-T1 activity is carried through the enzymatic cascade. These coatings modulated cell recognition. Hepatocellular carcinoma cells took up vesicles modified by β4Gal-T1 alone more extensively than sialylated vesicles produced by ‘one-pot’ sequential enzymatic modification.

Signal transduction through G protein-coupled receptors (GPCRs) involves binding to signalling molecules at the cell surface, which leads to global changes in molecular conformation that are communicated through the membrane. Artificial mechanisms for communication involving ligand binding and global conformational switching have been demonstrated so far only in the solution phase. Here we report a membrane-bound synthetic receptor that responds to binding of a ligand by undergoing a conformational change that is propagated over several nanometres, deep into the phospholipid bilayer. Our design uses a helical foldamer core, with structural features borrowed from a class of membrane-active fungal antibiotics, ligated to a water-compatible, metal-centred binding site and a conformationally-responsive fluorophore. Using the fluorophore as a remote reporter of conformational change, we find that binding of specific carboxylate ligands to a Cu(II) cofactor at the binding site perturbs the foldamer's global conformation, mimicking the conformational response of a GPCR to ligand binding.

There is a need for biofunctionalised magnetic nanoparticles for many biomedical applications, including MRI contrast agents that have a range of surface properties and functional groups. A library of eleven adducts, each formed by condensing a reducing sugar with a catechol hydrazide, for nanoparticle functionalisation has been created using a high-throughput chemical synthesis methodology. The enzymatic transformation of an N-acetylglucosamine (GlcNAc) adduct into an N-acetyllactosamine adduct by β-1,4-galactosyltransferase illustrates how chemoenzymatic methods could provide adducts bearing complex and expensive glycans. Superparamagnetic iron oxide nanoparticles (8 nm diameter, characterised by TEM, DLS and SQUID) were coated with these adducts and the magnetic resonance imaging (MRI) properties of GlcNAc-labelled nanoparticles were determined. This straightforward approach can produce a range of MRI contrast agents with a variety of biofunctionalised surfaces.

Synthetic twists among lipids Proteins embedded in cell membranes perform a wide variety of signaling and transport functions through conformational shifts. De Poli et al. examined how a much smaller, simpler construct might begin to achieve similar aims (see the Perspective by Thiele and Ulrich). Specifically, they designed an artificial peptide with a photosensitive group at one end and embedded it in a phospholipid bilayer akin to a membrane. Nuclear magnetic resonance spectroscopy revealed how light-induced isomerization influenced conformational dynamics at the other end. The results point the way toward development of small-molecule–based switches in membrane environments. Science , this issue p. 575 ; see also p. 520

A bis(cyclam)-capped lipid, obtained through a short synthetic pathway, binds cell surface CXCR4 and prevents migration of chronic lymphocytic leukaemia cells.A bis(cyclam)-capped cholesterol lipid designed to bind C–X–C chemokine receptor type 4 (CXCR4) was synthesised in good overall yield from 4-methoxyphenol through a seven step synthetic route, which also provided a bis(cyclam) intermediate bearing an octaethyleneglycol-primary amine that can be easily derivatised. This bis(cyclam)-capped cholesterol lipid was water soluble and self-assembled into micellar and non-micellar aggregates in water at concentrations above 8 μM. The bioactivity of the bis(cyclam)-capped cholesterol lipid was assessed using primary chronic lymphocytic leukaemia (CLL) cells, first with a competition binding assay then with a chemotaxis assay along a C–X–C motif chemokine ligand 12 (CXCL12) concentration gradient. At 20 μM, the bis(cyclam)-capped cholesterol lipid was as effective as the commercial drug AMD3100 for preventing the migration of CLL cells, despite a lower affinity for CXCR4 than AMD3100.

An optimized fluorescent probe, developed using spectroscopic and crystallographic analysis, reported on peptide foldamer conformation in different environments and revealed that phospholipid chirality can influence conformation., Exploring the detailed structural features of synthetic molecules in the membrane phase requires sensitive probes of conformation. Here we describe the design, synthesis and characterization of bis(pyrene) probes that report conformational changes in membrane-active dynamic foldamers. The probes were designed to distinguish between left-handed (M) and right-handed (P) screw-sense conformers of 310-helical α-aminoisobutyric acid (Aib) peptide foldamers, both in solution and in bilayer membranes. Several different bis(pyrene) probes were synthesized and ligated to the C-terminus of Aib tetramers that had different chiral residues at the N-terminus, residues that favored either an M or a P screw-sense in the 310-helix. The readily synthesized and conveniently incorporated N-acetyl-1,2-bis(pyren-1′-yl)ethylenediamine probe proved to have the best properties. In solution, changes in foldamer screw-sense induced substantial changes in the ratio of excimer/monomer fluorescence emission (E/M) for this reporter of conformation, with X-ray crystallography revealing that opposite screw-senses produce very different interpyrene distances in the reporter. In bilayers, this convenient and sensitive fluorescent reporter allowed, for the first time, an investigation of how the chirality of natural phospholipids affects foldamer conformation.

The magnetic release of catalytically active enzymes from vesicular compartments within aggregated nanomaterials has been demonstrated. These nanomaterials, magnetic nanoparticle-vesicle aggregates (MNPVs), were formed by the self-assembly of biotinylated silica-coated Fe3O4 nanoparticles, biotinylated vesicles and tetrameric avidin. The unique features of nanoscale magnetite allow adhesion between membranes to be combined with magnetically triggered transit of reagents across membranes. Adding short spacers between the adhesive biotin groups and the nanoparticle or vesicle surfaces was found to strengthen binding to avidin, with binding of avidin to biotinylated bilayers and biotinylated nanoparticles monitored by quartz crystal microgravimetry with dissipation (QCM-D). Three different reagents were released from the vesicle compartments of MNPVs by a pulse of alternating magnetic field, with the release of a dye modelling the release of small molecule substrates, and the release of cytochrome c modelling the release of biological polymers, such as enzymes. To confirm that enzymes could be released and maintain activity, trypsin was encapsulated and shown to digest casein after magnetically triggered release.

Peptaibols are peptide antibiotics that typically feature an N-terminal acetyl cap, a C-terminal aminoalcohol, and a high proportion of α-aminoisobutyric acid (Aib) residues. To establish how each feature might affect the membrane-activity of peptaibols, biomimetic Aib foldamers with different lengths and terminal groups were synthesised. Vesicle assays showed that long foldamers (eleven Aib residues) with hydrophobic termini had the highest ionophoric activity. C-terminal acids or primary amides inhibited activity, while replacement of an N-terminal acetyl with an azide group made little difference. Crystallography showed that N3Aib11CH2OTIPS folded into a 310 helix 2.91nm long, which is close to the bilayer hydrophobic width. Planar bilayer conductance assays showed discrete ion channels only for N-acetylated foldamers. However long foldamers with hydrophobic termini had the highest antibacterial activity, indicating that ionophoric activity in vesicles was a better indicator of antibacterial activity than the observation of discrete ion channels.

Conformationally mobile oligomers with helical structures, or 'dynamic foldamers', may populate a mixture of screw-sense conformers whose relative proportion has been used as a means of communicating information on a molecular scale. The dibenzazepinyl urea provides a means of quantifying both the sense and degree of this screw-sense preference through a combination of circular dichroism (CD) and NMR spectroscopy. The dibenzazepinyl urea probe is synthetically versatile, readily accessible, and easy to introduce to the terminus of an amide or a urea foldamer.

The biological activity of antibiotic peptaibols has been linked to their ability to aggregate, but the structure-activity relationship for aggregation is not well understood. Herein, we report a systematic study of a class of synthetic helical oligomer (foldamer) composed of aminoisobutyric acid (Aib) residues, which mimic the folding behavior of peptaibols. NMR spectroscopic analysis was used to quantify the dimerization constants in solution, which showed hydrogen-bond donors at the N terminus promoted aggregation more effectively than similar modifications at the C terminus. Elongation of the peptide chain also favored aggregation. The geometry of aggregation in solution was investigated by means of titrations with [D6]DMSO and 2D NOE NMR spectroscopy, which allowed the NH protons most involved in intermolecular hydrogen bonds in solution to be identified. X-ray crystallography studies of two oligomers allowed a comparison of the inter- and intramolecular hydrogen-bonding interactions in the solid state and in solution and gave further insight into the geometry of foldamer-foldamer interactions. These solution-based and solid-state studies indicated that the preferred geometry for aggregation is through head-to-tail interactions between the N and C termini of adjacent Aib oligomers.

The effect of Schellman motifs on the adoption of stable 310 helical conformations in a series of aminoisobutyric (Aib) oligomers has been studied in the solid state and solution. The destabilising effect of the Schellman motif (a local inversion of helical screw-sense due to a C-terminal ester residue) was quantified in the solid state using X-ray crystallography through analysis of the torsion angles and their deviation from those observed in an ideal 310 helix. Investigation of the intramolecular hydrogen-bonding interactions in the solid state led to the identification of a fully extended C5 conformation in one oligomer, which is a novel folding motif for Aib oligomers. The effect of ester groups with differing steric demands on intermolecular hydrogen-bonding contacts in the solid state was also ascertained. In solution, the adoption of a 310 conformation in Aib oligomers appeared to be more finely tuned, depending on a number of factors, including chain length and the steric demands of the C-terminal destabilising Schellman motif.

Wulff-type boronic acids have been shown to act as ionophores at pH 8.2 by transporting Na(+) through phospholipid bilayers. A cholate-boronic acid conjugate was synthesised and shown to be an ionophore, although the hydroxyl-lined face of the cholate moiety did not enhance ion transport. Mechanistic studies suggested a carrier mechanism for Na(+) transport. The addition of fructose (5 mM) strongly inhibited ionophoric activity of the cholate-boronic acid conjugate, mirrored by a strong decrease in the ability of this compound to partition into an organic phase. Modelling of the partitioning and ion transport data, using a fructose/boronic acid binding constant measured at pH 8.2, showed a good correlation with the extent of fructose/boronic acid complexation and suggested high polarity fructose/boronic acid complexes are poor ionophores. The sensitivity of ion transport to fructose implies that boronic acid-based antibiotic ionophores with activity modulated by polysaccharides in the surrounding environment may be accessible.

A synthetic perfluoroalkyl-tagged lactosyl glycolipid has been shown to form lipid microdomains in fluid phospholipid bilayers. When embedded in the membranes of phospholipid vesicles, this glycolipid was trans-sialylated by soluble T. cruzi trans-sialidase (TcTS) to give a perfluoroalkyl-tagged glycolipid that displayed the ganglioside GM3 epitope, with up to 35% trans-sialylation from fetuin after 18 h. Following sialylation, vesicles bearing this Neu5Ac(α2-3)Gal(β1-4)Glc sequence in their "glycocalyx" were recognised and agglomerated by the lectin M. amurensis leukoagglutinin. Monitoring TcTS-mediated trans-sialylation by HPLC over the first 6 h revealed that enzymatic transformation of bilayer-embedded substrate was much slower than that of a soluble lactosyl substrate. Furthermore, clustering of the lactose-capped glycolipid into "acceptor" microdomains did not increase the rate of sialic acid transfer from fetuin by soluble TcTS, instead producing slight inhibition.

Cells carefully control the transit of compounds through their membranes using “gated” protein channels that respond to chemical stimuli. Connexin gap junctions, which are high conductance cell-to-cell channels, are a remarkable class of “gated” channel with multiple levels of assembly. A gap junction between adhering cells comprises two half-channels in each cell membrane that adhere to each other to form a continuous cell-to-cell channel. Each half-channel is a hexameric assembly of six protein transmembrane subunits. These gap junctions display both intramembrane assembly and intermembrane assembly, making them an attractive target for biomimetic studies. Although many examples of self-assembled channels have been developed, few can also mediate intermembrane adhesion. Developing systems that combine membrane adhesion with controlled transit across the membrane would not only provide a better understanding of self-assembly in and around the membrane, but would also provide a route towards smart biomaterials, targeted drug delivery and an interface with nanotechnology. This Account describes our biomimetic approaches to combining membrane adhesion with membrane transport, using both self-assembled “sticky” pores and “sticky” nanoparticles to trigger transit across membranes. This combination links both fundamental and applied research, acting as a bridge between molecular level assembly and the formation of functional biomaterials. The ultimate goal is to create complex self-assembled systems in biological or biomimetic environments that can both interface with cells and transport compounds across bilayers in response to remote chemical or electromagnetic signals. Our research in this area started with fundamental studies of intramembrane and intermembrane self-assembly, building upon previously known channel-forming compounds to create self-assembled channels that were switchable or able to mediate vesicle–vesicle adhesion. Subsequently, nanoparticles with a “sticky” coating were used to mediate adhesion between vesicles. Combining these adhesive properties with the unique characteristics of nanosized magnetite allowed a noninvasive magnetic signal to trigger transport of compounds out of magnetic nanoparticle-vesicle assemblies. Adding an extravesicular matrix produced new responsive biomaterials for use in tissue engineering. These biomaterials can be magnetically patterned and can deliver drugs upon receipt of a magnetic signal, allowing spatiotemporal control over cellular responses.

Helical oligomers of achiral monomers adopt domains of uniform screw sense, which are occasionally interrupted by screw-sense reversals. These rare, elusive, and fast-moving features have eluded detailed characterization. We now describe the structure and habits of a screw-sense reversal trapped within a fragment of a helical oligoamide foldamer of the achiral quaternary amino acid 2-aminoisobutyric acid (Aib). The reversal was enforced by compelling the amide oligomer to adopt a right-handed screw sense at one end and a left-handed screw sense at the other. The trapped reversal was characterized by X-ray crystallography, and its dynamic properties were monitored by NMR and circular dichroism, and modelled computationally. Raman spectroscopy indicated that a predominantly helical architecture was maintained despite the reversal. NMR and computational results indicated a stepwise shift from one screw sense to another on moving along the helical chain, indicating that in solution the reversal is not localised at a specific location, but is free to migrate across a number of residues. Analogous unconstrained screw-sense reversals that are free to move within a helical structure are likely to provide the mechanism by which comparable helical polymers and foldamers undergo screw-sense inversion.

Providing magnetite nanoparticles with saccharide coatings has been found to significantly increase the interactions of the nanoparticles with cells. Glucose (Glc) or N-acetylglucosamine (GlcNAc) coated magnetic nanoparticles (MNPs) were used to magnetically label 3T3 fibroblast cells, and the response of the labelled cells to external magnetic fields was studied. It was found that cells incubated with Glc- or GlcNAc-coated nanoparticles were much more likely to move towards an external magnet than those incubated with uncoated nanoparticles. Furthermore, cells in suspension moved much faster than those in contact with the surface of polystyrene well plates, with stronger magnets increasing the speed of movement. Cells that were adhering to the floor of the cell culture well and did not move in the x-y plane could still be rotated about the z-axis by moving the external magnet around the cell.

The addition of amines to an aldehyde surfactant, which was designed to be analogous to didodecyldimethylammonium bromide, gave exchangeable “iminolipids” that self-assembled to give stable aqueous dispersions of nano-sized vesicles. For example, sonication of suspensions of the n-hexylamine-derived iminolipid gave vesicles 50 to 200 nm in diameter that could encapsulate a water-soluble dye. The iminolipids could undergo dynamic exchange with added amines, and the resulting equilibrium constants (Krel) were quantified by 1H NMR spectroscopy. In the absence of lipid self-assembly, in CDCl3, the assayed primary amines gave very similar Krel values. However in D2O the value of Krel generally increased with increasing amine hydrophobicity, consistent with partitioning into a self-assembled bilayer. Amines with aromatic groups showed significantly higher values of Krel in D2O compared to similarly hydrophobic alkylamines, suggesting that π–π interactions favor lipid self-assembly. Given this synergistic relationship, π-rich pyrenyliminolipids were created and used to exfoliate graphite, leading to aqueous dispersions of graphene flakes that were stable over several months.

A self-assembled Fmoc-peptide hydrogel has been interfaced with a liquid crystal (LC) display to give an optical sensor for enzyme activity. An Fmoc-TL-OMe hydrogel was selected as it can be formed in situ by enzyme-mediated assembly with thermolysin, and undergoes enzyme-mediated diassembly upon subtilisin addition. This enzyme-responsive hydrogel provides a semi-rigid, highly hydrated and biocompatible environment that also holds the LC display in place. A dual layer design was developed, where a phospholipid-loaded upper gel layer was separated from the LC display by a phospholipid free lower layer. Subtilisin (0.15 μM) digested both layers to give a gel-to-sol transition after several hours that liberated the phospholipid and produced a light-to-dark optical change in the LC display. The optical response was dependent upon the gel-to-sol transition; elastase or common components of serum did not disassemble the Fmoc-TL-OMe hydrogel and did not give an optical response.

A membrane-spanning bis(meso-3-pyridyl) porphyrin 1 has been synthesized, embedded in EYPC vesicles, and upon Pd(II) addition has been shown to form ionophores that allow the passage of anionic 5/6-carboxyfluorescein through membranes. The geometric matching of bis(meso-3-pyridyl) porphyrin 1 and trans-Pd(II) was designed to give a cyclic porphyrin trimer [PdCl(2)(1)](3). However, solution-phase studies showed that PdCl(2)(PhCN)(2) cross linked 1 into linear oligomers at porphyrin concentrations above 10 mM, although the formation of cyclic species was inferred from studies at concentrations below 2 μM. Fluorescence titrations showed that embedding porphyrin 1 in bilayers greatly reduced its affinity for Pd(II), but the combination of porphyrin 1 and Pd(II) gave an ionophoric species that increased the rate of 5/6-carboxyfluorescein (5/6-CF) transit through the phospholipid bilayer 12-fold. A maximum in the 5/6-CF release rate was observed at a Pd(II) concentration of 4 μM, and the application of a solution-phase binding model to the membrane phase showed that this peak in ionophoric activity corresponded to the greatest extent of porphyrin oligomerization. Further studies suggested these Pd(II)/porphyrin oligomers transported 5/6-CF via a channel mechanism.

The relationship between the clustering of adhesive lipids and the binding of multivalent ligands has been investigated using a simple model system. Pyrene perfluoroalkyl lipids capped with mannose and biotin were found to extensively phase separate in phospholipid bilayers containing >25% mol/mol cholesterol. This clustering of adhesive lipids into these “artificial lipid rafts” did not enhance multivalent binding in either case, conversely weakening the initial interaction between avidin and phase-separated biotin-capped lipid (at 1% mol/mol). The affinity of concanavalin A for vesicle-bound mannose lipid (K ∼ 2500 M−1) was low and insensitive to the extent of adhesive lipid clustering, fitting an intervesicular monovalent binding model. Although the initial binding of avidin to vesicle-bound biotin lipid was also weak (K up to 8 × 106 M−1), avidin maximised the adhesive interaction by either clustering or dispersing these biotinylated lipids. This reorganisation gave up to a ∼500-fold increase in affinity, consistent with multivalent intramembrane binding of avidin to biotinylated lipids. These observations suggest that in natural systems, high receptor densities in lipid rafts may not be designed solely to generate high affinities for multivalent ligands but also to allow multivalent ligands to induce signal transduction or endocytosis by increasing or decreasing receptor density in lipid rafts.

A synthetic transmembrane receptor that is capable of transmitting binding information across a lipid bilayer membrane is reported. The binding event is based on aggregation of the receptor triggered by copper(II) complexation to ethylenediamine functionalities. By labelling the receptor with fluorescent dansyl groups, the copper(II) binding event could be monitored by measuring the extent of fluorescence quenching. Comparing the receptor with a control receptor lacking the transmembrane linkage revealed that the transmembrane receptor binds copper(II) ions more tightly than the non-spanning control receptor at low copper(II) concentrations. Since the intrinsic binding to copper(II) is the same for both receptors, this effect was attributed to synergy between the connected interior and exterior binding sides of the transmembrane receptor. Thus, this is the first reported artificial signalling event in which binding of a messenger on one side of the membrane leads to a cooperative binding event on the opposite side of the membrane, resembling biological signalling systems and helping us to get a better understanding of the requirements for more effective artificial signalling systems.

The synthetic biology toolbox lacks extendable and conformationally controllable yet easy-to-synthesize building blocks that are long enough to span membranes. To meet this need, an iterative synthesis of α-aminoisobutyric acid (Aib) oligomers was used to create a library of homologous rigid-rod 310-helical foldamers, which have incrementally increasing lengths and functionalizable N- and C-termini. This library was used to probe the inter-relationship of foldamer length, self-association strength, and ionophoric ability, which is poorly understood. Although foldamer self-association in nonpolar chloroform increased with length, with a ∼ 14-fold increase in dimerization constant from Aib6 to Aib11, ionophoric activity in bilayers showed a stronger length dependence, with the observed rate constant for Aib11 ∼ 70-fold greater than that of Aib6. The strongest ionophoric activity was observed for foldamers with10 Aib residues, which have end-to-end distances greater than the hydrophobic width of the bilayers used (∼ 2.8 nm); X-ray crystallography showed that Aib11 is 2.93 nm long. These studies suggest that being long enough to span the membrane is more important for good ionophoric activity than strong self-association in the bilayer. Planar bilayer conductance measurements showed that Aib11 and Aib13, but not Aib7, could form pores. This pore-forming behavior is strong evidence that Aibm (m ≥ 10) building blocks can span bilayers.

A simple synthetic route has been devised for the production of coating agents that can give multivalent displays of saccharides on the surface of magnetite nanoparticles and phospholipid vesicles. A versatile and potentially high-throughput condensation reaction allowed the rapid synthesis of a variety of glycosylhydrazide conjugates with lipid, resorcinol or catechol termini, each in good yield and high anomeric purity. The hydrolytic stability of these adducts was assessed in D2O at different pD values using (1)H-NMR spectroscopy, whilst quartz crystal microbalance with dissipation monitoring (QCM-D) confirmed that the saccharide functionality on bilayers and on nanoparticles was still available to lectins. These multivalent saccharide displays promoted nanoparticle interactions with cells, for example N-acetylglucosamine-coated nanoparticles interacted much more effectively with 3T3 fibroblasts than uncoated nanoparticles with these cells. Despite potential sensitivity to oxidation, catechol coatings on magnetite nanoparticles were found to be more stable and generate better nanoparticle interactions with fibroblasts than resorcinol coatings.

Helical peptide foldamers rich in α-aminoisobutyric acid (Aib) act as peptaibol-mimicking ionophores in the phospholipid bilayers of artificial vesicles. Racemic samples of these foldamers are more active than their enantiopure counterparts, which was attributed to differing propensities to form aggregates with crystal-like features in the bilayer.

Biomolecular systems are able to respond to their chemical environment through reversible, selective, noncovalent intermolecular interactions. Typically, these interactions induce conformational changes that initiate a signaling cascade, allowing the regulation of biochemical pathways. In this work, we describe an artificial molecular system that mimics this ability to translate selective noncovalent interactions into reversible conformational changes. An achiral but helical foldamer carrying a basic binding site interacts selectively with the most acidic member of a suite of chiral ligands. As a consequence of this noncovalent interaction, a global absolute screw sense preference, detectable by (13)C NMR, is induced in the foldamer. Addition of base, or acid, to the mixture of ligands competitively modulates their interaction with the binding site, and reversibly switches the foldamer chain between its left and right-handed conformations. As a result, the foldamer-ligand mixture behaves as a biomimetic chemical system with emergent properties, functioning as a "proton-counting" molecular device capable of providing a tunable, pH-dependent conformational response to its environment.

A series of new sugar-based nonionic surfactants have been synthesized and their lyotropic liquid crystalline properties characterized. When in contact with water, these surfactants formed a range of lyotropic liquid crystalline phases, including cubic, hexagonal, and lamellar, as well as a separate micellar phase. These are features that have promise for the crystallization of integral membrane proteins.

The binding of copper(II) ions to membrane-bound synthetic receptors has been investigated. Complexation fitted a 4:1 receptor:copper(II) model, and the observed binding constants are significantly enhanced at the membrane relative to solution; these effects can be explained by the lower polarity of the membrane-water interface and the concentrating effect of the membrane, with no observed contribution from receptor preorganization. The stoichiometry of the complex formed is very sensitive to the concentration of the receptor in the membrane, and at low concentrations, binding is reduced relative to solution controls. This implies that by increasing or decreasing the number of receptors in their membranes, cells can finely tune biological responses such as chemotaxis that depend on the size of the receptor-ligand clusters formed.

The solid state conformational preferences of a series of 2-aminoisobutyric acid (Aib) foldamers bearing a single N-terminal tertiary amino acid (Cbz-L-phenylalanine (Cbz-L-Phe)) have been investigated by X-ray crystallography. The type of β-turn present at the N-terminus and the global screw-sense preferences of the Aib foldamers were determined by analysis of intramolecular hydrogen-bonds and peptide torsion angles. The contrasting influence of a C-terminal ester or amide on the 310 helical conformation of the foldamers was established by identifying the hydrogen-bonding motifs adopted in the solid state. The ability of non-Aib achiral quaternary residues in the middle of the chain to stabilise the 310 helix was similarly confirmed. Combining these structural features, which promote the formation of consecutive i → i + 3 β-turns in Aib foldamers, permitted the formation of long chain oligomers in 310 helical conformations that extend over 21 Å.

Magnetic nanoparticle-vesicle aggregates (MNPVs), a controlled release nanostructure, have been enhanced with the inclusion of a novel galactose terminated lipid for cell targeting. Quartz crystal microgravimetry with dissipation (QCM-D) demonstrated that the galactose headgroup was available to bindErythrina Crista-gallilectin (ECL) when the lipid was incorporated into a lipid bilayer. Similarly, UV-visible spectrophotometry indicated that ECL recognized the galactose headgroup in vesicles, leading to vesicle adhesion and aggregation. Finally, confocal fluorescence microscopy was used to assess the galactose-mediated interaction of both vesicles and MNPVs with HepG2 human hepatocellular carcinoma cells expressing the asialoglycoprotein (ASGPR) galactose receptor.

The condensation of hydrazides with aldehydes has been found to be a simple and rapid method for synthesizing catechol-terminated coating reagents for magnetite nanoparticles. This approach allowed the production of biotin- and polyethylene glycol-functionalized nanoparticles, whose interaction with 3T3 fibroblast cells has been assessed. The cellular location of these nanoparticles was imaged by fluorescence microscopy, which was made possible by co-coating with a porphyrin-catechol conjugate. Images show significant interactions between biotinylated nanoparticles and 3T3 fibroblasts, but those with a polyethylene glycol coating did not interact.