Search

The design of compact thermoacoustic devices requires compact jet pump geometries, which can be realized by employing jet pumps with multiple orifices. The oscillatory flow through the orifice(s) of a jet pump generates asymmetric hydrodynamic end effects, which result in a time-averaged pressure drop that can counteract Gedeon streaming in traveling wave thermoacoustic devices. In this study, the performance of jet pumps having 1-16 orifices is characterized experimentally in terms of the time-averaged pressure drop and acoustic power dissipation. Upon increasing the number of orifices, a significant decay in the jet pump performance is observed. Further analysis shows a relation between this performance decay and the diameter of the individual holes. Possible causes of this phenomenon are discussed. Flow visualization is used to study the differences in vortex ring interaction from adjacent jet pump orifices. The mutual orifice spacing is varied and the corresponding jet pump performance is measured. The orifice spacing is shown to have less effect on the jet pump performance compared to increasing the number of orifices.

A computational fluid dynamics model is used to predict the oscillatory flow through tapered cylindrical tube sections (jet pumps). The asymmetric shape of jet pumps results in a time-averaged pressure drop that can be used to suppress Gedeon streaming in closed-loop thermoacoustic devices. However, previous work has shown that flow separation in the diverging flow direction counteracts the time-averaged pressure drop. In this work, the characteristics of flow separation in jet pumps are identified and coupled with the observed jet pump performance. Furthermore, it is shown that the onset of flow separation can be shifted to larger displacement amplitudes by designs that have a smoother transition between the small opening and the tapered surface of the jet pump. These design alterations also reduce the duration of separated flow, resulting in more effective and robust jet pumps. To make the proposed jet pump designs more compact without reducing their performance, the minimum big opening radius that can be implemented before the local minor losses have an influence on the jet pump performance is investigated. To validate the numerical results, they are compared with experimental results for one of the proposed jet pump designs., The following article has been accepted by the Journal of the Acoustical Society of America. After it is published, it will be found at: http://scitation.aip.org/JASA

In thermoacoustic devises, the thermoacoustic e ect occurs in the regenerator placed between two heat exchangers. The entrance e ects of such heat exchanger are investigated with two computational uid dynamics (CFD) test cases. The rst CFD test case models an ideal heat exchanger adjacent to an open space. The in uence of the heat conduction on the mean temperature is shown. The second test case models two screens of a stacked screen heat exchanger as two inline cylinders. Three di erent openings are investigated. The mean temperature pro le is compared to the numerical solution of a reduced model equation. It is shown that viscous e ects do not in uence the mean temperature pro le at low amplitude.

A concentric gas-to-gas heat exchanger is designed for application as a recuperator in the domestic boiler industry. The recuperator recovers heat from the exhaust gases of a combustion process to preheat the ingoing gaseous fuel mixture resulting in increased fuel efficiency. This applied study shows the use of computational fluid dynamics simulations as an efficient design tool for heat exchanger design. An experimental setup is developed and the simulation results are validated

The oscillatory flow through tapered cylindrical tube sections (jet pumps) is characterized by a numerical parameter study. The shape of a jet pump results in asymmetric hydrodynamic end effects which cause a time-averaged pressure drop to occur under oscillatory flow conditions. Hence, jet pumps are used as streaming suppressors in closed-loop thermoacoustic devices. A two-dimensional axisymmetric computational fluid dynamics model is used to calculate the performance of a large number of conical jet pump geometries in terms of time-averaged pressure drop and acoustic power dissipation. The investigated geometrical parameters include the jet pump length, taper angle, waist diameter and waist curvature. In correspondence with previous work, four flow regimes are observed which characterize the jet pump performance and dimensionless parameters are introduced to scale the performance of the various jet pump geometries. The simulation results are compared to an existing quasi-steady theory and it is shown that this theory is only applicable in a small operation region. Based on the scaling parameters, an optimum operation region is defined and design guidelines are proposed which can be directly used for future jet pump design., The following article has been accepted by the Journal of the Acoustical Society of America. After it is published, it will be found at http://scitation.aip.org/JASA

A two-dimensional computational fluid dynamics model is used to predict the oscillatory flow through a tapered cylindrical tube section (jet pump) placed in a larger outer tube. Due to the shape of the jet pump, there will exist an asymmetry in the hydrodynamic end effects which will cause a time-averaged pressure drop to occur that can be used to cancel Gedeon streaming in a closed-loop thermoacoustic device. The performance of two jet pump geometries with different taper angles is investigated. A specific time-domain impedance boundary condition is implemented in order to simulate traveling acoustic wave conditions. It is shown that by scaling the acoustic displacement amplitude to the jet pump dimensions, similar minor losses are observed independent of the jet pump geometry. Four different flow regimes are distinguished and the observed flow phenomena are related to the jet pump performance. The simulated jet pump performance is compared to an existing quasi-steady approximation which is shown to only be valid for small displacement amplitudes compared to the jet pump length., The following article has been accepted by the Journal of the Acoustical Society of America. After it is published, it will be found at: http://scitation.aip.org/JASA

Thermoacoustic cryocoolers are of raising interest because they are cost effective and reliable. The underlying heat pumping process occurs in the regenerator, where a sound wave interacts with a solid matrix material. Stacked screens are frequently used to build regenerators for thermoacoustic applications because of their favorable thermal properties and vast mesh sizes. One dimensional codes are commonly used for estimating the performance of thermoacoustic cryocoolers. While these codes are a useful tool in thermoacoustic device design, they do not incorporate entrance effects at the extremities of the regenerator or the resulting convective effects. In this paper these effects are investigated by means of a full Navier-Stokes solution of the flow and heat transfer in a geometrical reduced model of a regenerator. It is shown that convective effects play a role at low pressure amplitudes. A convection driven heat pumping process occurring at the extremities of the regenerator is described. Furthermore, a geometrical study is conducted to estimate the optimal opening of the stacked screen for ideal heat transfer.

Thermoacoustic functions are important parameters of one-dimensional codes used for the design of thermoacoustic engines. The thermal and viscous thermoacoustic functions allow the inclusion of three dimensional effects in one-dimensional codes. These functions are especially important in the regenerator of a thermoacoustic engine, where the thermoacoustic heat pumping occurs. Even though analytical solutions were derived for uniform pores, the thermoacoustic functions for complex geometries such as stacked screen or random fiber regenerators cannot be calculated analytically. In order to gain more insight into the geometry induced complex flow fields, the procedure of Udea, et al. (2009) to estimate the thermoacoustic functions was applied in computational fluid-dynamic simulations. By using two measurement locations outside of the regenerator and modeling the regenerator as an array of uniform pores it is possible to estimate the thermoacoustic functions for complex geometries. Furthermore, a correction method is proposed to quantify the entrance effects at the beginning and end of a regular pore. The simulations are first validated for a uniform cylindrical pore with the help of the analytical solution. Then the correction method is successfully applied to a cylindrical pore with the results closely matching the analytical solution.

The effect of flow separation and turbulence on the performance of a jet pump in oscillatory flows is investigated. A jet pump is a static device whose shape induces asymmetric hydrodynamic end effects when placed in an oscillatory flow. This will result in a time-averaged pressure drop which can be used to suppress acoustic streaming in closed-loop thermoacoustic devices. An experimental setup is used to measure the time-averaged pressure drop as well as the acoustic power dissipation across two different jet pump geometries in a pure oscillatory flow. The results are compared against published numerical results where flow separation was found to have a negative effect on the jet pump performance in a laminar flow. Using hot-wire anemometry the onset of flow separation is determined experimentally and the applicability of a critical Reynolds number for oscillatory pipe flows is confirmed for jet pump applications. It is found that turbulence can lead to a reduction of flow separation and hence, to an improvement in jet pump performance compared to laminar oscillatory flows.