Search

Titanium currently has a well-established position as the gold standard for manufacturing dental implants; however, it is not free of flaws. Mentions of possible soft-tissue discoloration, corrosion, and possible allergic reactions have led to the development of zirconia dental implants. Various techniques for the surface modification of titanium have been applied to increase titanium implants' ability to osseointegrate. Similarly, to achieve the best possible results, zirconia dental implants have also had their surface modified to promote proper healing and satisfactory long-term results. Despite zirconium oxide being a ceramic material, not simply a metal, there have been mentions of it being susceptible to corrosion too. In this article, we aim to review the literature available on zirconia implants, the available techniques for the surface modification of zirconia, and the effects of these techniques on zirconia's biological properties. Zirconia's biocompatibility and ability to osseointegrate appears unquestionably good. Despite some of its mechanical properties being, factually, inferior to those of titanium, the benefits seem to outweigh the drawbacks. Zirconia implants show very good success rates in clinical research. This is partially due to available methods of surface treatment, including nanotopography alterations, which allow for improved wettability, bone-to-implant contact, and osteointegration in general. [ABSTRACT FROM AUTHOR]

The newest technology allows the medical industry to manufacture innovative products such as milled titanium prosthodontic parts in an implant for a screw-retained suprastructure. In the literature, there are some articles on the clinical usage of subperiosteal implants, but none of these publications, either in PubMed or Google Scholar, thoroughly describe the workflow for the design and manufacture of individual implants for maxillofacial surgery with milled threads for a screw-retained prosthodontic bridge. The aim of the article is to present a step-by-step method of producing personalized implants, from the first steps of production to the implantation of the final product. The article includes information on patient qualification for surgery, computational preparation and skull printing, planning of Mai Implants®, meshing, 3D printing and milling, cleaning, rinsing, anodizing, and laser marking, as well as the cleaning and sterilization process in a hospital or dental clinic. A detailed description of implant production allows for the analysis of each step and the development of technology. The production of implants is an expensive procedure, but considering all the advantages of the Mai Implants® treatment and the disadvantages of alternatives, the product is worth the price. [ABSTRACT FROM AUTHOR]

Thermal barrier coatings (TBCs) are widely used for protection of gas turbine parts from high temperature and corrosion. In the present study, the new concept of TBCs with three-element-modified aluminide coatings was presented. In the first stage, the Pt and Pd were electroplated on MAR M247 nickel superalloy. In the next stage, the low-activity CVD aluminizing process with Zr or Hf doping was conducted. The ceramic layer containing yttria-stabilized zirconia was obtained by the plasma spray physical vapour deposition (PS-PVD) method. The microscopic examination showed the formation of aluminide coating containing up to 5 at% of Pt and 10 at% of Pd in (Ni, Pt, Pd)Al solid solution. The small concentration of Hf and Zr in diffusion zone of aluminide bond coat was noted as well. The outer ceramic layer was characterized by columnar structure typically formed during the PS-PVD process. The obtained results showed that the new concept of TBCs formed using new processes might be an attractive alternative to conventional coatings produced using the expensive electron beam physical vapour deposition (EB-PVD) method.

The microstructures and structures of modified Al2O3/IF-WS2 coatings prepared on aluminum substrates are studied. Amorphous Al2O3 oxide coatings are obtained on EN AW 5251 aluminum alloy using the electrooxidation process. The quality of the IF-WS2 nanopowder is of great importance in the process of its introduction into the nanopores of the Al2O3 oxide coating. Commercial nanopowder tends to agglomerate, and without appropriate pretreatment, it is difficult to introduce it into the nanopores of the coating. To improve the degree of fragmentation of the IF-WS2 nanopowder, an experiment was carried out to distribute the nanopowder in the presence of strong ultrasounds, and new conditions for introducing the powder into the nanopores were used. A two-level design of experiment (DOE) was used. The SEM examination made it possible to conclude that Method A contributed to a more even distribution of nanoparticles in the microstructure of Al2O3 coatings. GIXD analyses showed the presence of WO3 derived from the IF-WS2 modifier next to crystal structures derived from aluminum and WS2. Modification of coatings using Method A resulted in surfaces with lower contact angles measured with polar liquids and higher surface free energy compared to Method B. [ABSTRACT FROM AUTHOR]

This paper presents the influence of plasma electrolytic oxidation parameters (peak current density, process time, pulse frequency) on the tribological properties and surface wettability of the produced coatings. The process parameters were selected in accordance with Hartley's research plan for three input variables with three variable values. Oxide coatings were made on the AZ31B magnesium alloy using a trapezoidal voltage waveform and a two-component alkaline electrolyte. The tribological properties of the coatings were determined as a result of tribological tests carried out on the T-17 tester in reciprocating motion. The tribological partner for the coatings was a PEEK/HPV pin. As a result of tribological tests, the friction coefficient µ, the mass wear of the pin and the average change in sample mass were determined. The tests showed changes in both the friction coefficient and pin wear. Before and after tribological tests, profilographometric measurements of the coatings were performed. The tests allowed for the determination of roughness parameters and the load–bearing curve of the sample surfaces. Surface wettability tests were carried out by determining the contact angles. [ABSTRACT FROM AUTHOR]

This paper reports the results of our study on electrochemical polishing of titanium and a Ti-based alloy using non-aqueous electrolyte. It was shown that electropolishing ensured the removal of surface defects, thereby providing surface smoothing and decreasing surface roughness. The research was conducted using samples made of titanium and Ti6Al4V alloy, as well as implant system elements: implant analog, multiunit, and healing screw. Electropolishing was carried out under a constant voltage (10–15 V) with a specified current density. The electrolyte used contained methanol and sulfuric acid. The modified surface was subjected to a thorough analysis regarding its surface morphology, chemical composition, and physicochemical properties. Scanning electron microscope images and profilometer tests of roughness confirmed significantly smoother surfaces after electropolishing. The surface profile analysis of processed samples also yielded satisfactory results, showing less imperfections than before modification. The EDX spectra showed that electropolishing does not have significant influence on the chemical composition of the samples. [ABSTRACT FROM AUTHOR]