Search

This study aimed at performing a systematic review of the literature on the effects of epigallocatechin-3-gallate (EGCG) oniStreptococcus mutans/iplanktonic cultures and biofilms. The selected references demonstrated that EGCG suppressesiS. mutans/iacid production by inhibiting the activity of enzymes such as lactate dehydrogenase and FIF0-ATPase. Regarding virulence factors, one study reported a reduction in soluble and insoluble polysaccharide synthesis, another demonstrated that EGCG inhibited GTase activity, and another showed effects of EGCG on the expression ofigtf/iB, C, and D. The effects of EGCG oniS. mutans/ibiofilms were reported only by 2 of the selected studies. Moreover, high variability in effective concentrations and microbial assessment methods were observed. The literature suggests that EGCG has effects againstiS. mutans/iplanktonic cells viability and virulence factors. However, the literature lacks studies with appropriate biofilm models to evaluate the precise effectiveness of EGCG againstiS. mutans/ibiofilms.

This study aimed to characterize the aluminum phthalocyanine chloride (AlClPc) encapsulated in chitosan nanoparticles (CN) and apply it in antimicrobial photodynamic therapy (aPDT) on multispecies biofilm composed of Streptococcus mutans, Lactobacillus casei, and Candida albicans to analyze the antimicrobial activity and lactate production after treatment. Biofilms were formed in 24-well polystyrene plates at 37 °C for 48 h under microaerophilia. The following groups were evaluated (n = 9): as a positive control, 0.12% chlorhexidine gluconate (CHX); phosphate-buffered saline (PBS) as a negative control; 2.5% CN as release vehicle control; the dark toxicity control of the formulations used (AlClPc and AlClPc + CN) was verified in the absence of light; for aPDT, after 30 min incubation time, the photosensitizers at a final concentration of 5.8 × 10–3 mg/mL were photoirradiated for 1 min by visible light using a LED device (AlClPc + L and AlClPc + CN + L) with 660 nm at the energy density of 100 J/cm2. An in vitro kit was used to measure lactate. The biofilm composition and morphology were observed by scanning electron microscopy (SEM). The antimicrobial activity was analyzed by quantifying colony forming units per mL (CFU/mL) of each microorganism. Bacterial load between groups was analyzed by ANOVA and Tukey HSD tests (α = 0.05). A lower lactate dosage was observed in the aPDT AlClPc + CN + L and CHX groups compared to the CN and AlClPc groups. The aPDT mediated by the nanoconjugate AlClPc + CN + L showed a significant reduction in the viability of S. mutans (3.18 log10 CFU/mL), L. casei (4.91 log10 CFU/mL), and C. albicans (2.09 log10 CFU/mL) compared to the negative control PBS (p 0.05). The aPDT mediated by the nanoconjugate AlClPc + CN + L was efficient against the biofilm of S. mutans, L. casei, and C. albicans.

Introdução: O clareamento dental é um procedimento muito requisitado nos consultórios odontológicos, estimulando a constante pesquisa por novos produtos e tecnologias. Objetivo: Este estudo teve como objetivo avaliar ‘in vitro’ a alteração de cor do esmalte dental clareado com luz LED violeta, associada ou não ao gel de peróxido de hidrogênio. Métodos: 48 fragmentos de dentes bovinos (5 x 5 x 3mm) foram planificados e polidos. O manchamento dos espécimes foi realizado por meio de imersão dos fragmentos em 20ml de café, substituído a cada 24h, por um período de 7 dias. Os grupos experimentais foram divididos em: Clareado com luz LED violeta (LV); Clareado com peróxido de hidrogênio 35% (PH, controle positivo); Clareado com peróxido de hidrogênio 35% + luz LED violeta (PH + LV); Gel placebo (C, controle negativo). A variável de resposta foi a análise de alteração de cor, realizada com auxílio de um espectrofotômetro de colorimetria. Foram realizadas três leituras em cada espécime: 1) antes do início da imersão nas soluções de manchamento (baseline); 2) após o manchamento com café; 3) após os tratamentos. Os dados foram tabulados e analisados estatisticamente com a análise de variância (ANOVA-1 fator) e testes de Tukey (α=0,05). Resultados: Os valores de ΔE mostraram diferença significativa entre os grupos. PH + LV apresentou maiores valores de mudança de cor e o grupo C, os menores. LV e PH foram estatisticamente semelhantes aos grupos PH + LV e C. Conclusão: O clareamento com peróxido de hidrogênio 35% e a luz LED violeta pode provocar alterações de cor visíveis, independentemente da associação dos tratamentos; porém, a associação dos métodos potencializa a eficácia do tratamento clareador.

Metalloproteinase-inhibiting agents, such as chitosan, can prevent collagen degradation in demineralized dental substrates, thereby improving the adhesive interface. This study evaluated the bond strength (BS) and chemical and morphological characterization of the adhesive interface after applying chitosan solution to demineralized dentin.The 80 third molars were selected. Forty teeth underwent caries induction using the pH cycling method. The teeth were divided according to the treatment: distilled water (control) and 2.5% chitosan solution. The surfaces were restored using adhesive and composite resins. Half of the specimens in each group were aged, and the other half underwent immediate analyses. The teeth were sectioned and underwent the microtensile bond strength test (µTBS), and chemical and morphological analyses using energy-dispersive spectroscopy and scanning electron microscopy, respectively. Data analysis was performed using 3-way analysis of variance.For µTBS, sound dentin was superior to demineralized dentin (Chitosan treatment improved bond strength both immediately and after aging, even in demineralized dentin.

Brazil has become the epicenter of coronavirus disease, and the Sao Paulo State has the worst scenario. This study evaluated the effect of the COVID-19 in dentists of Sao Paulo State, Brazil. A self-administered web-based survey with 33 multiple-choice questions was sent to dentists. Descriptive statistics were used to assess the 302 valid responses. Data were analyzed by Chi-square, McNemar and Wilcoxon tests (α = 0.05). Most of the participants aged until 34 years (61.6%) and were female (74.5%). They reduced work to less than 20 h per week. Monthly remuneration was reduced (86.8%). Personal protective equipment at the office was changed (p

Aim: To evaluate the influence of the biomodification of erosive lesions with a chitosan nanoformulation containing green tea (NanoCsQ) on the clinical performance of a composite resin. Methods: The study was performed in a split-mouth, randomized and double-blinded model with 20 patients with 40 erosive lesions. The patient’s teeth were randomized into two groups (n=20) according to the surface treatment: 1) Without biomodification (control), and 2) Biomodification with NanoCsQ solution (experimental). The lesions were restored with adhesive (Tetric N-bond, Ivoclar) and composite resin (IPS Empress Direct, Ivoclar). The restorations were polished and 7 days (baseline), 6 months, and 12 months later were evaluated according to the United States Public Health Service (USPHS) modified criteria, using clinical exam and photographics. Data were analyzed by Friedman’s and Wilcoxon signed-rank tests. Results: No significant differences were found between the control and experimental groups (p=0.423), and also among the follow-up periods (baseline, six months, and 12 months) (p=0.50). Regarding the retention criteria, 90% of the restoration had an alpha score in the control group. Only 10% of the restorations without biomodification (control) had a score charlie at the 12-month follow-up. None of the patients reported post-operatory sensitivity. Conclusion: The NanoCsQ solution did not negatively affect the performance of the composite resin restorations after 12 months.

The aim of this study was to longitudinally evaluate, after a 4-year period, the clinical longevity of composite resin restoration compared to the baseline, after selective caries removal in permanent molars using Er:YAG laser or bur preparation with biomodification of dentin with the use of chlorhexidine. Selective caries removal was performed on 80 teeth of 20 individuals who each had at least four active carious lesions. These lesions, located on occlusal surfaces of permanent molar counterparts, were removed using (i) Er:YAG laser biomodified with chlorhexidine, (ii) Er:YAG laser and application of deionized water, (iii) bur preparation biomodified with chlorhexidine, and (iv) bur preparation and application of deionized water. At the end of 4 years, 64 of the 80 restorations were evaluated in 16 individuals (n = 16). The restorations were evaluated, both clinically and photographically, using scanning electron microscopy (SEM) and pulp vitality analysis. The experimental data were statistically evaluated by kappa, Fisher’s, and chi-square tests, with a significance level of 5%. The Kaplan–Meier test and the Cox regression analysis were used to evaluate the survival of the restorations. After 4 years of follow-up, there was a statistically significant difference in marginal discoloration criteria for all of the groups evaluated. For marginal adaptation criteria, there was a statistically significant difference for the Er:YAG laser group biomodified with chlorhexine (p = 0.050). For clinical and radiographic evaluation of pulp vitality, there were no statistically significant differences among the groups (p = 0.806). Er:YAG laser can be used for selective caries removal, regardless of dentin biomodification with chlorhexidine or application of deionized water, once it produced promising results in composite resin restorations after 4 years of follow-up, according to the criteria evaluated. The selective caries removal using Er:YAG laser or bur and the biomodification of dentin with the use of chlorhexidine did not influence the survival of composite resin restorations after the 4-year follow-up period. Composite resin restorations applied after selective caries removal using Er:YAG laser or burs, regardless of dentin biomodification with the use of chlorhexidine or application of deionized water, showed adequate clinical behavior after 4 years of follow-up.

This study aimed to investigate dentin wettability and surface morphology after selective removal of carious lesion by erbium-doped yttrium aluminum garnet (Er:YAG) laser, followed by dentin biomodification with carbodiimide (EDC) and chitosan (CHI). Seventy-eight bovine dentin specimens were submitted to caries induction. Specimens were distributed according to methods of carious removal (n = 39): bur at low-speed (40,000 rpm) or Er:YAG laser (noncontact mode, 250 mJ/pulse and 4Hz). All specimens were etched with 35% phosphoric acid, and subdivided according to dentin biomodification (n = 13): Control (no biomodification), EDC or CHI. The contact angle (n = 10) between adhesive system (3M ESPE) and dentin surface was measured by a goniometer. Eighteen specimens (n = 3) were analyzed by scanning electron microscopy. Data were analyzed by two-way ANOVA and Tukey's test (α = .05). The method used to remove carious lesion did not influence the wettability of dentinal surface (p = .748). The angles produced on the remaining dentin after biomodification were influenced (p = .007). CHI promoted higher contact angles (p = .007) and EDC did not differ from the control group (p = .586). In the bur-treated group, most tubules were open, regardless of which biomodifier was used. Laser modified the organic matrix layer. CHI promoted partially closed tubules in some areas while EDC exposed dentinal tubules. Regardless of which method was used for selective removal of carious lesion, biomodification with EDC did not affect the dentin wettability, whereas CHI changed the wettability of remaining dentin. Both biomodifiers promoted a slight change on dentin morphology.

Objective Use fluorescence analysis to evaluate the effect of polishing and surface sealant on the color of composite resin bleached with carbamide peroxide and subjected to staining. Materials and methods Forty-eight composite resin specimens (Z250/Z350XT) were fabricated. After 24 hours stored in distilled water, all specimens were submitted to in situ bleaching with 16% home peroxide for 8 hours daily for a period of 14 days. Subsequently specimens were separated in three groups according to surface treatment proposed (group 1-polishing Sof-Lex; group 2-BisCover; group 3-control). After this, all the specimens were stained with red wine. A spectrofluorometer was used to evaluate the fluorescence in two readouts (L0-after surface treatment and L1-after staining).Data were analyzed by applying ANOVA using a statistical software program. Results No differences were shown for the factor treatment and other interactions. The lowest mean fluorescence value was found for Z350XT resin (1759.18 ± 0.13) when compared with Z250 (6863.92 ± 0.13). There was significant difference in the mean fluorescence values for all surface treatments between the two different readouts L0 (4820.93 ± 0.05) and L1 (3802.17 ± 0.05). Conclusion The results suggested that all surface treatments proposed did not influenced the results of wine staining of bleached resins when compared with the control evaluated by the fluorescence method. Clinical significance The purposes of this research was to find solutions, by means of surfaces treatment, to achieve restorations with a satisfactory and similar final aspect in relation to the teeth, and avoid discrepancies related to the esthetics and longevity of the restoration.

Introduction: This study evaluated the impact of CO2 laser treatment and acidulated phosphate fluoride (APF) on enamel demineralization and biofilm formation, using in vitro and in situ designs. Methods: Demineralized enamel slabs were distributed among 8 groups: placebo, placebo + continuous CO2 laser, placebo + repeated CO2 laser, placebo + ultrapulsed CO2 laser, 1.23% APF, APF + continuous CO2 laser, APF + repeated CO2 laser and APF + ultrapulsed CO2 laser. In the in vitro study, 15 enamel slabs from each group were subjected to a pH-cycling regimen for 14 days. In the cross over in situ design, 11 volunteers wore palatal appliances with demineralized enamel slabs for 2 periods of 14 days each. Drops of sucrose solution were dripped onto enamel slabs 8×/day. Biofilms formed on slabs were collected and the colony-forming units (CFU) of Streptococcus mutans and Lactobacillus were determined. Results: For both in vitro and in situ studies, there was no significant difference between treatments (P>0.05). However, all treatments increased microhardness of demineralized enamel (P0.05) or Lactobacillus (P>0.05) counts between groups. Conclusion: The results suggest that APF gel combined with the CO2 laser, regardless of the pulse emission mode used, was effective in controlling enamel demineralization, but none of the tested treatments was able to prevent bacterial colonization.

Background In 2019, a viral and respiratory pathology called COVID-19 emerged in Wuhan, China, and spread to other continents. Its main symptoms include fever, cough, dyspnea, myalgia, anorexia and respiratory distress in the most severe cases, which can lead to death. Furthermore, manifestations in the oral cavity such as ageusia and dysgeusia, as well as lesions in other regions of the oral cavity, can be observed. Main body This systematic review and meta-analysis aimed to critically assess the clinical evidence on the use of photobiomodulation (PBMT) and antimicrobial photodynamic therapy (aPDT) for the treatment of oral lesions in patients infected with Sars-Cov-2. The literature extracted from electronic databases such as PubMed, Medline, CINAHL, and Google Scholar was screened for eligibility, and relevant articles were included. The review is limited to manuscripts published in English, Spanish and Portuguese language between December 2019 and October 2021. A total of 5 articles with 11 cases retracting PBMT and aPDT as therapeutic strategies for the regression of oral lesions and painful symptoms. The results show favoring the associated use of PBMT with aPDT (P = 0.004), and the isolated use of PBMT with the result of significant “P = 0.005” and good confidence interval (7.18, 39.20) in ulcerative lesions, herpetic, aphthous, erythematous, petechiae and necrotic areas. Conclusions PBMT and aPDT could be effective in the treatment of oral lesions of patients infected with Sars-Cov-2 in a short period of time; however, more long-term randomized clinical trials studies are needed to define the therapeutic strategy.

During orthodontic tooth movement (OTM), there is the release of cytokines in the gingival crevicular fluid (GCF) that are supposed to participate in the bone remodeling. This systematic review aimed at assessing the effects of photobiomodulation (PBM) on the levels of these cytokines during OTM. This systematic review according to Cochrane Collaboration guidelines aimed to answer the clinical question following the PICOS strategy. The broad search in the literature was performed before 05 April, 2021 in six electronic databases (Pubmed, Web of Science, Scopus, Embase, Cochrane, Biblioteca Virtual de Saude) and supplemented by the grey literature. The risk of bias of randomized and non-randomized clinical trials was evaluated by two tools: RoB 2 and ROBINS-I. Mean and standard deviation of cytokine levels was extracted to meta-analysis, and the GRADE system was applied to assess the quality of the evidence. Nine studies were included in this review. Low-level laser therapy (LLLT) was the photobiomodulation type used in most of the studies (n = 8). The wavelengths used varied from 618 to 980 nm and also differed concerning the light emission pattern. LLLT increased the levels of IL-1β, IL-8, OPN, and PGE2, but not TNF-α1, TGF-β1. The levels of IL6, RANKL, and OPG presented conflicting results. LLLT was statistically associated with an increase of IL-1β levels (standard mean difference [SMD] = 1.99; 95% confidence interval = 0.66 to 3.33; p

Objective This study investigated whether a sample of anterior resin composite restorations could be differently evaluated in different centers of evaluation by clinical and lay evaluators. Methods Anterior resin composite restorations on high-quality intraoral digital photography were evaluated using FDI criteria (1-5 score) by pairs of clinical and lay evaluators in Brazil (BR), France (FR), Peru (PE), and the United States of America (USA). Scores were allocated as maintenance (1, 2, 3), repair (4) and replacement (5) when comparing clinical evaluators and, as acceptable (1, 2, 3) and unacceptable (4, 5) when comparing clinical vs. lay evaluators and lay vs. lay evaluators. The Chi-square test compared the frequencies of scores among the centers. Results The frequencies of maintaining, repairing, or replacing anterior resin composite restorations given by clinical evaluators varied depending on the evaluation center. BR and PE showed the highest frequencies for repair and replacement, while FR and USA showed the highest frequencies for maintenance. The comparison of frequencies of anterior resin composite restorations accepted or unaccepted by the clinical vs lay evaluators in the same centers showed a significantly higher frequency of acceptable dental restorations coming from clinical evaluators. Comparison between lay evaluators from different centers showed significant higher frequency of unacceptable dental restorations by BR, compared to other centers. Conclusions In the evaluation of anterior resin composite restorations, the maintenance, repair, or replacement trends can vary among different centers. The unacceptable rate came more frequently from lay than from clinical evaluators. Lay evaluators from different centers differed significantly. Clinical Significance Clinical and lay evaluators in distant evaluation centers can present different trends when assessing anterior resin composite restoration. Multicenter evaluations can help to understand such differences and it is important because clinical decision-making based on scientific evidence comes from clinical studies done in different research centers.

To evaluate the influence of the pre-treatment with 2.5% nanoparticulate chitosan (2.5% NanoChi) solution on eroded dentin before the restorative dental treatment. The sample consisted of 22 patients (age between 33 and 52 years) with shallow or medium erosion lesions located in two homologous teeth. The teeth were randomly assigned according to dentin treatment: with 2.5% NanoChi and without with chitosan (control). The NanoChi were applied immediately after acid etching. The teeth were restored with Single Bond Universal (3 M) and Charisma resin (Kulzer). Analyzes were done using modified USPHS (retention, secondary caries, marginal adaptation, and sensitivity) and photographic (color, marginal pigmentation, and anatomical form) criteria at 7 days (baseline) and 1 year. Population demographics, Kaplan–Meier estimates and log-rank test (Mantel–Cox) were calculated for 1 year (α = 0.05). No significant difference was found in the survival rates between groups (p > 0.05) at 7 days and 1 year after treatment. After 7 days, 100% of the restorations were scored as Alpha on all criteria. After 1 year, 91% of the NanoChi restorations were scored as Alpha and 9% as Charlie for the retention, marginal adaptation, and anatomical form criteria, while 86% of the control restorations (without NanoChi) received the Alpha score and 14% received the Charlie. Secondary caries, sensitivity, color, and marginal pigmentation criteria were scored as Alpha in 100% of the restorations. The biomodification of eroded dentin with 2.5% NanoChi did not influence the survival of the restorations after 1 year. The application of 2.5% NanoChi on eroded dentin did not increase failures of resin restorations after 1 year and it can be used as a pre-treatment solution.

The purpose of this study was to assess the effect of a chitosan-based nanoformulation containing green tea on leathery (remaining) dentin subsurface microhardness. Size distribution, polydispersity index (PDI) and zeta potential (mV) of nanoformulations were previously determined by dynamic light scattering (DLS). Human dentin specimens were exposed to Streptococcus mutans for 14 d. Soft dentin were selectively removed by Er:YAG laser (n = 30) or bur (n = 30). Remaining dentin was biomodified with chitosan nanoparticles (Nchi, n = 10) or green tea-loaded chitosan nanoparticles (Gt + Nchi, n = 10) for 1 min. Control group (n = 10) did not receive any treatment. Subsurface microhardness (Knoop) was evaluated in hard (sound) and soft dentin, and then, in leathery dentin and after its biomodification, at depths of 30, 60 and 90 μm from the surface. Nchi reached an average size of ≤ 300 nm, PDI varied between 0.311 and 0.422, and zeta potential around + 30 mV. Gt + Nchi reached an average size of ≤ 350 nm, PDI 0.45, and zeta potential around + 40 mV. Soft dentin showed significantly reduced microhardness at all depths (p 0.05). The subsurface microhardness was independent of choice of excavation method (p 0.05). At 30 µm from the surface, Gt + Nchi increased the leathery dentin microhardness compared to untreated group (p 0.05). Nchi promoted intermediate values (p 0.05). Both nanoformulations showed an average size less than 350 nm with nanoparticles of different sizes and stability along the 90-day period evaluated. Subsurface microhardness of bur-treated and laser-irradiated dentin was similar. At 30 µm, the biomodification with Gt + Nchi improved the microhardness of leathery dentin, independently of caries excavation method used.

Objective This study evaluated the knowledge and perceptions of Brazilian dental students about COVID‐19 and the undergraduate clinical practice during the COVID‐19 outbreak by a self‐administered Web‐based questionnaire. Methods A social network campaign on Instagram was raised to approach the target population. The survey covered demographic and academic profile, general knowledge, preventive measures and perception about COVID‐19. Descriptive statistics were used to identify frequencies and distributions of variables, which were compared by type of institution and current year of enrolment using the Chi‐square or Fisher's exact tests (α = 0.05). Results A total of 833 valid responses were received over 10 days. Students were able to identify the incubation period, main symptoms and contagious routes of the disease but struggled in recognising the name of the virus responsible for the pandemic. Hand washing before and after a dental appointment with a patient (97.7%) followed by the use of barriers to protect mucosa (97.2%) were the more frequently recognised measures to prevent COVID‐19 spread in the dental office. As for the perception of COVID‐19, 73.2% of the dental students perceived the disease as severe, whilst only 11.1% of them thought that COVID‐19 is severe only for people presenting risk factors. Dental student's knowledge and perception were associated with the type of institution and year of enrolment. Conclusion In summary, the dental students demonstrated an acceptable general knowledge about COVID‐19, but dental schools will need to address gaps in knowledge, preventive measures, and perceptions to ensure a safer return to in person activities.

Background Antimicrobial photodynamic therapy (aPDT) using chloroaluminium phthalocyanine (ClAlPc) has high oxidative power allowing for the control of biofilms, especially when the photosensitizer is administered in an appropriate release vehicle. This study aimed to develop/characterize the ClAlPc encapsulated in chitosan nanoparticles (CSNPs), and evaluate its antimicrobial properties against S. mutans biofilms. Methods CSNPs were prepared by ion gelation, and characterization studies included particle size, polydispersion index (IPd), zeta potential, accelerated stability, absorption spectrum and ClAlPc quantification. The S. mutans biofilms were formed in bovine dentin blocks at 37 °C for 48 h under microaerophilic conditions. 8 μM ClAlPc was combined with a diode laser (InGaAlP) at 660 nm and 100 J/cm2. The aPDT toxicity was verified by dark phototoxicity. The antimicrobial activity was verified by CFU/mL and biofilm was analyzed by scanning electron microscopy (SEM). The number of viable bacteria was analyzed by ANOVA and Tukey HSD tests (α = 0.05). Results The characterization revealed that the ClAlPc nanoparticles were found in nanometer-scale with adequate photophysical and photochemical properties. The aPDT mediated by ClAlPc + CSNPs nanoconjugate showed a significant reduction in the viability of S. mutans (1log10 CFU/mL) compared to the negative control (PBS, p 0.05). SEM revealed change in biofilm morphology following the treatment of bacteria with aPDT ClAlPc + CSNPs. Cells were arranged as single or in shorted chains. Irregular shapes of S. mutans were found. Conclusion ClAlPc nanoparticles are considered stable and aPDT mediated by ClAlPc + CSNPs nanoconjugate was effective against S. mutans biofilm.

Root-filled teeth that received fiber posts most frequently fail at the adhesive interface between resin cement and dentin. The objective of this study is to evaluate the effect of Er:YAG laser and/or sodium ascorbate (SA) on bond strength, microhardness of dentin, and penetration depth of cement into dentinal tubules. Forty-eight bovine incisor roots were endodontically treated, post spaces were prepared and equally divided into four groups (n = 12): G1-distilled water (control); G2-10% SA (10 min); G3-Er:YAG laser (150 mJ/4 Hz/40 s), and G4-Er:YAG laser + 10% SA. Glass fiber posts were cemented and roots sectioned into slices. In the first slice, the push-out bond strength (MPa) and failures were analyzed by confocal laser scanning microscope (CLSM). The second slice was subjected to microhardness test (KHN) and CLSM to assess the cement penetration. ANOVA and Tukey test were used for bond strength and microhardness data and Kruskal-Wallis and Dunn tests for the cement penetration (α = .05). The SA-treated samples had higher bond strength (10.02 ± 5.45a), similar to Er:YAG laser (9.91 ± 4.62a) and Er:YAG laser + SA (8.09 ± 4.07a). The least values (P .05) were found on control (4.02 ± 2.39b). Significant differences were observed on root thirds (P .05): cervical middle apical. There was a predominance of adhesive failures. The microhardness test revealed no differences between groups (P .05). The experimental groups (G2, G3, and G4) had highest penetration into dentinal tubules when compared to the control (G1). Dentin pretreatments with Er:YAG laser or SA improved bond strength of cement-post-dentin interfaces; however, no synergistic effect of both treatments combined was observed.

To evaluate the effect of aPDT on S. mutans and C. albicans present in the dental biofilm, using methylene blue as a photosensitizer in different pre-irradiation times. The searches were made on Pubmed, Web of Science, Bireme, Scopus and Cochrane Library, and were complemented by screening the references of selected articles in the attempt to find any article that did not appear in the database search. The searches were performed by two researchers and limited to studies involving human subjects published in the English language. Inclusion criteria included in vitro studies with aPDT; studies that used methylene blue as a photosensitizer; studies that used low power laser; studies that evaluated S. mutans or C. albicans. Studies published in a non-English language, patents, in vivo or in situ studies; case reports, serial case, reviews and animal studies were not included. Studies published before 1996 were also not included. Initially, the search resulted in 68 published studies. 16 records were excluded because they were duplicated. The analysis of titles and abstracts resulted in the exclusion of 48 of the published studies, resulting in 4 studies included in the systematic review. The aPDT was effective in three of the four papers selected for the systematic review and the pre-irradiation time used was 5 or 15 min. This therapy had satisfactory results in both C. albicans and S. mutans when using methylene blue as a photosensitizer.

The aim of the present study was to evaluate, in vitro, the effect of different pre-irradiation times of the photosensitizer in photodynamic therapy in biofilms formed by Streptococcus mutans and Candida albicans, through the evaluation of the microbial load. The factors under study were as follows: times of pre-irradiation of the photosensitizer in three levels (1, 2, or 5 min). For the control of the cariogenic dental biofilm with antimicrobial photodynamic therapy (aPDT), methylene blue (0.01%) was used in association with the diode laser (InGaAlP) with a wavelength of 660 nm. Chlorhexidine digluconate (0.12% CHX) and saline were used as positive and negative controls, respectively. The study design was carried out in complete and randomized blocks. The sample consisted of 15 S. mutans biofilms cultures, randomly divided into five groups and 15 C. albicans cultures, also divided into five groups. The experiment was performed in triplicate (n = 3) and the response variables were obtained through quantitative analysis of bacterial viability, expressed in colony-forming units (CFU) per square millimeter of the specimen area. The data were analyzed with the aid of the ANOVA one-way test and Tukey's post-test. All analyses were performed using the Graph Pad Prism 4.0 program, with a significance level of 5%. For the S. mutans group, only the saline solution presented a statistically significant difference when compared to the other treatments (p 0.05), that is, the treatment with aPDT, irrespective of the irradiation time applied, was similar to the treatment with CHX and both were more effective in reducing cariogenic biofilm compared to saline. For the group of C. albicans, there was no statistical difference between the groups (p 0.05). Therefore, it can be concluded that the treatment with aPDT reduced the number of CFUs of S. mutans in a similar way to CHX, independently of the pre-irradiation time applied. No effect of this therapy or of the different pre-irradiation times on the C. albicans biofilm could be observed. In this way, the pre-irradiation time of 1 min can be used to reduce the microbial load of S. mutans.

Objective To assess the effect of chitosan, at concentrations of 2.5% and 5.0%, on the wettability of the eroded dentin, followed by analysis of surface morphology by SEM. Methods 104 bovine dentin slabs were ground, polished and then immersed in 20 mL of citric acid (pH = 3.2) under continuous stirring for 2 h. Specimens were randomly divided according to the dentin substrate: sound and eroded, and then, subdivided into 4 groups (n = 10): without rewetting (control), 1% acetic acid, 2.5% chitosan and 5.0% chitosan. Then, a drop of the adhesive system Single Bond 2 (3M) was deposited onto surface of each specimen. The contact angle between dentin surface and the adhesive system was measured by using a goniometer. The other 24 specimens were subjected to analysis under SEM. Statistical analysis was performed using the normality test (Kolmogorov-Smirnov) and Analysis of Variance (ANOVA) (p > 0.05). Results No differences were found between the angles produced on the eroded dentin rewetting with chitosan at the concentrations of 2.5% and 5%. Conclusion The chitosan, regardless of the concentration used, did not influence the eroded dentin wettability. Through SEM analysis, it was found particles of chitosan deposited on the surface and within the dentinal tubules.

To assess the effect of Er:YAG and diode lasers on the shear bond strength (SBS) of adhesive systems to bovine dentin submitted to bleaching with a high concentration agent. One hundred and twenty bovine dentin fragments were used. Fragments were distributed into 12 groups (n = 10) considering the bleaching (present or not), surface post-treatment (untreated, Er:YAG laser or diode laser) and adhesive system (total-etching or self-etching). Specimens received two applications of 38% hydrogen peroxide. Er:YAG laser (2940 nm, 200 mJ, 4 Hz) and diode laser (980 nm, 1.5 W) were applied for 15 s on bleached dentin surface. Restoration was performed with resin using split matrix. Specimens were submitted to SBS test and data (MPa) were analyzed by ANOVA and Tukey’s test (α = 0.05). SBS of bleached specimens decreased in comparison with non-bleached (p

The aim of this study was to evaluate the effect of cavity preparation with Er:YAG laser on dentin adjacent to restorations submitted to cariogenic challenge in situ, by subsuperficial microhardness analysis. Bovine incisors were sectioned, flattened, and polished, resulting in 40 dentin slabs. The slabs were randomly assigned to four groups (n = 10), according to the cavity preparation method: I-high-speed handpiece (control); II-Er:YAG laser (160 mJ; 3 Hz); III-Er:YAG laser (260 mJ; 3 Hz); IV-Er:YAG laser (300 mJ; 3Hz). Cavities were restored with composite resin, and the specimens were fixed in intra-oral appliances, which were worn by 10 volunteers for 14 days for simulating cariogenic challenge in situ. During the experimental period, 20% sucrose solution was dripped over each specimen 6 times a day. Samples were removed, sectioned, and examined for subsuperficial Knoop microhardness at 100, 200, and 300 μm from the restoration and at 30 μm from dentin surface. Split-plot analysis of variance showed no significant difference among the cavity preparation techniques (p = 0.1129), among distances (p = 0.9030), as well as no difference in the interaction between the main factors (p = 0.7338). It was concluded that the cavity preparation with Er:YAG laser did not influence on dentin microhardness submitted to cariogenic challenge in situ.

Introduction: This study evaluated the impact of CO(2) laser treatment and acidulated phosphate fluoride (APF) on enamel demineralization and biofilm formation, using in vitro and in situ designs. Methods: Demineralized enamel slabs were distributed among 8 groups: placebo, placebo + continuous CO(2) laser, placebo + repeated CO(2) laser, placebo + ultrapulsed CO(2) laser, 1.23% APF, APF + continuous CO(2) laser, APF + repeated CO(2) laser and APF + ultrapulsed CO(2) laser. In the in vitro study, 15 enamel slabs from each group were subjected to a pH-cycling regimen for 14 days. In the cross over in situ design, 11 volunteers wore palatal appliances with demineralized enamel slabs for 2 periods of 14 days each. Drops of sucrose solution were dripped onto enamel slabs 8×/day. Biofilms formed on slabs were collected and the colony-forming units (CFU) of Streptococcus mutans and Lactobacillus were determined. Results: For both in vitro and in situ studies, there was no significant difference between treatments (P>0.05). However, all treatments increased microhardness of demineralized enamel (P0.05) or Lactobacillus (P>0.05) counts between groups. Conclusion: The results suggest that APF gel combined with the CO(2) laser, regardless of the pulse emission mode used, was effective in controlling enamel demineralization, but none of the tested treatments was able to prevent bacterial colonization.

Introduction: This study aimed to evaluate the child’s salivary cortisol levels, clinical performance and marginal adaptation of restorations after selective removal of necrotic dentin in primary teeth using Er: YAG laser irradiation. Methods: A double-blind clinical study was performed in children at 7-10 years. Children who had at least 2 teeth with carious lesions involving the occlusal and proximal surfaces of primary molars counterparts were selected. Removal of necrotic dentin was performed by 2 methods: Er: YAG laser irradiation and bur-preparation. Cortisol levels (n =24) was evaluated by ELISA. Clinical analysis (n =20) was performed after the restorations polish, 6 and 12 months after restorative procedure using United States Public Health Service (USPHS) method and photographs. Scanning electron microscopy (SEM) was used to analyz the marginal gap formation (n =20). The analysis of the data was performed by 95% confidence interval, Shapiro-Wilk test, Friedman and Wilcoxon post hoc tests (α =5%). Results: Cortisol levels were higher during selective removal of necrotic dentin, regardless of the method used (P>0.05). After 12 months, there was no evidence of the difference in the restorations performed on cavities prepared by both methods. SEM analysis revealed that the laser-irradiated teeth showed 10% of gaps in the full extent of restoration. For bur-prepared teeth, 20% of gaps were found at the cavosurface margin. Conclusion: The salivary cortisol levels on children that received Er: YAG laser irradiation for removal the necrotic dentin was similar to the control group. Class II restorations evaluated after 1 year period did not suffer interference by the use of Er: YAG laser irradiation.

Background There is still no systematized evidence in the literature regarding the combination of curcumin to improve the effects of antimicrobial photodynamic therapy (aPDT) on complex oral biofilms. Therefore, the objective of this review was to systematically assess the antimicrobial effect of curcumin-mediated aPDT on the vitality of biofilms of microorganisms Streptococcus mutans and Candida albicans. Methods The addressed focused question was: “What are the effects of curcumin-mediated antimicrobial therapy on the biofilm viability of Streptococcus mutans and Candida albicans in vitro models?” A literature search was conducted in the electronic databases Pubmed, Web of Science, Scopus, Cochrane Library and Bireme up to April 2019. In vitro studies evaluating the effect of curcumin-mediated antimicrobial photodynamic therapy on S. mutans and C. albicans biofilms were included. Results From 95 citations, 11 full-text articles were screened and 6 studies were included in this review. Because of the heterogeneity observed in the studies selected, meta-analysis was not possible. Conclusions The in vitro studies indicate the potential use of curcumin-mediated aPDT to inactivate microorganisms; Streptococcus mutans and Candida albicans. This survey should be viewed as a starting point for further examinations using standardized parameters to enhance outcomes.

Made available in DSpace on 2019-10-06T16:11:42Z (GMT). No. of bitstreams: 0 Previous issue date: 2019-03-01 Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) Objective: The purpose of this study was to evaluate the effect of Er:YAG laser for selective removal of carious lesion, followed by biomodification with chitosan on the microtensile bond strength (µTBS), adhesive interface, dry mass loss and hydroxyproline release (HYP). Methods: Artificial lesions were created in 104 bovine dentin blocks. Blocks were divided according to caries removal method: bur or Er:YAG laser. Seventy-six blocks were acid etched and subdivided according to dentin biomodification: no chitosan and 2.5% chitosan. Composite resin restorations were performed. Blocks were sectioned into beams and stored in water. After 24 h, 6 and 12 months, beams were submitted to μTBS test (n = 10) and analysis of adhesive interface by SEM (n = 3). The other 28 blocks were sectioned into beams and initial dry mass (DM) was determined (n = 7). Beams were stored and after 7 days, DM was redetermined. HYP release (n = 7) was evaluated by ELISA. Data were analyzed by ANOVA and Bonferroni's tests (α = 0.05). Results: After 24 h, the highest µTBS was found for bur (p < 0.001). After 6 months, methods were similar (p = 0.432). After 12 months, laser-irradiated dentin showed the highest µTBS values (p = 0.025). Chitosan promoted higher µTBS values after 6 (p = 0.011) and 12 months (p < 0.001) preserving adhesive interface. Dry mass loss and HYP release were not influenced (p > 0.05) by caries removal method or by dentin biomodification. Conclusion: The bond strength to demineralized dentin reduced over 50% in all groups after water storage. From 6 months of water storage, Er:YAG laser irradiation and biomodification with chitosan maintained the stability of the resin-dentin bonds, but did not influence dry mass loss and HYP release. Department of Restorative Dentistry Ribeirao Preto School of Dentistry/São Paulo University Department of Orthodontics and Pediatric Dentistry Araraquara School of Dentistry UNESP – Univ Estadual Paulista Department of Dental Materials and Prosthodontics Ribeirao Preto School of Dentistry/São Paulo University Department of Orthodontics and Pediatric Dentistry Araraquara School of Dentistry UNESP – Univ Estadual Paulista FAPESP: 2014/23654-9

Objective: The aim of this study was to evaluate the effect of different concentrations of a natural antioxidant (grape seed extract) on the bond strength of the restorative material to the bleached enamel. Methods: Forty fragments of healthy bovine incisors were randomly divided into four groups (n = 10): Group I: no bleaching; Group II: Bleaching with 35% hydrogen peroxide (HP) and without post-treatment; Group III: Bleaching with 35% HP + 5% grape seed extract; and Group IV: Bleaching with 35% HP + 10% grape seed extract. The bond strength at the adhesive interface was evaluated using the shear test (MPa). The data were analyzed by the analysis of variance (ANOVA) and Tukey test ( =0.05%). The fracture types were also analyzed and classified into: adhesive, cohesive or mixed. Results: Only Group III (bleached + 5% grape seed extract) had a significant increase (p

Aim: This cross-sectional study aimed to investigate where Brazilian dental students seek information about COVID-19 by a self-administered web-based questionnaire. Methods: A social network campaign on Instagram was raised to approach the target population. The dental students responded to a multiple-response question asking where or with whom they get information about COVID-19. The possible answers were government official websites or health and education institutions websites, TV Programs, professors, social media, scientific articles, health professionals, and family members. The data were analyzed by descriptive statistics, and the frequency distributions of responses were evaluated by gender, age, type of institution, and year of enrollment. Results: A total of 833 valid responses were received. The main source of information used by the dental students were government official websites or health and education institutions websites, which were reported by 739 (88.7%) participants. In the sequence, 477 (57.3%) participants chose health professionals while 468 (56.2%) chose scientific articles as information sources. The use of social media was reported by 451 (54.1%) students, while TV programs were information sources used by 332 (39.9%) students. The least used information sources were professors, reported by 317 (38.1%) students, and family members, chosen only by 65 (7.8%) participants. Conclusion: Brazilian dental students rely on multiple information sources to stay informed about COVID-19, mainly focusing their information-seeking behavior on governmental and health professional’s websites.

The objective of this study was to evaluate longitudinally the composite restorations, performed in cavities prepared by Er:YAG or conventional bur, and dentin re-wetting with water or chlorhexidine. Twenty individuals with four active caries with cavitation reaching the dentin located on the occlusal surface of molars counterparts are selected. The teeth of each individual were randomly assigned into four groups: (I) Er:YAG laser (260 mJ/4 Hz) re-wetting with chlorhexidine, (II) Er:YAG laser (260 mJ/4 Hz) re-wetting with deionized water, (III) conventional method re-wetting with chlorhexidine, and (IV) conventional method re-wetting with deionized water. The teeth were isolated, prepared cavities, phosphoric acid etching, and re-wetting according to previously assigned method. Restoration was performed employing the Single Bond 2 and Z350XT resin. Clinical follow-up was held after the polishing of the restoration (baseline) and 6 and 12 months of the making of the restoration using the modified USPHS criteria. The restorations were qualitatively analyzed by means of photographs. In the evaluation period, replicas of the restorations were analyzed by SEM. Data were analyzed by statistics using chi-square test (p

Objective This study evaluated the combined effect of fluoride varnish to Er:YAG or Nd:YAG laser on permeability of eroded root dentine. Design Sixty slabs of bovine root dentine (2 × 2 × 2 mm) were eroded with citric acid 0.3% (pH 3.2) during 2 h and then kept in artificial saliva during 24 h. Specimens were randomly assigned in 6 groups ( n = 10), to receive the following treatments: fluoride varnish; fluoride varnish + Er:YAG laser; fluoride varnish + Nd:YAG laser; non-fluoride varnish; non-fluoride varnish + Er:YAG laser; non-fluoride varnish + Nd:YAG laser. The Er:YAG (100 mJ, 3 Hz) and Nd:YAG (70 mJ, 15 Hz) were applied for 10 s. Specimens were subjected to further erosive challenges with citric acid 0.3% 4×/day, during 1 min, for 5 days, remaining in artificial saliva between cycles. Dentin permeability was then assessed. Two-way ANOVA demonstrated no significant interaction between laser and varnish ( p = 0.858). Results No effect was also detected for the main factor varnish ( p = 0.768), while permeability of eroded root dentin was significantly lower when such substrate was laser-irradiated, no matter the laser source ( p Conclusions This study concluded that Er:YAG and Nd:YAG lasers can be employed to control the permeability of eroded root dentin, regardless of fluoride varnish application.

To assess the influence of antioxidants (sodium ascorbate - SA, epigallocatechin-3-gallate (EGCG) from Camellia sinensis and punicalagin from Punica granatum) or lasers (Er:YAG and diode) on bleached dentin.Four hundred and forty slabs of intracoronary dentin were prepared: 224 for bond strength (debonding test) (n = 14), 96 for chemical analysis (EDS) and morphology (SEM) (n = 6), 96 for interface analysis (n = 6) and 24 for atomic force microscopy (AFM). The slabs were distributed according to the post-treatment after bleaching (35% hydrogen peroxide): GI- no bleaching and no post-treatment, GII- only bleached, GIII- 10-days delay in restorative procedure, GIV- 10% SA (10 min), GV- 0.5% EGCG (10 min), GVI- 0.5% punicalagin (10 min), GVII- Er:YAG laser (0.80W, 20s) and GVIII- diode laser (1.5W, 20s). Restorative procedures were done. Half of the slabs were analyzed immediately and the others, after 12 months. Debonding and AFM data were analyzed by ANOVA and Tukey tests (α = 0.05).All the post-treatments, except for punicalagin, reestablished the immediate bond strength, similar to those restored after 10 days (p 0.05). Following degradation, EGCG and punicalagin reestablished the bond strength (p 0.05). Lasers were not effective in maintaining the bond strength after 12 months (p 0.05). Higher O levels were found after bleaching but were reduced overtime. Ca and P remained stable. SEM and AFM showed residual granules of SA and irregular surface due to the laser action. After aging, tags and good interface were verified in GI, GIII, GV and GVI.Sodium ascorbate, EGCG or lasers restored the immediate bond strength, but only the natural extracts were effective in the long-term durability of resin. Thus, EGCG at 0.5% for 10 min seems to be the best pre-restorative treatment for bleached substrate.

Background The literature presents many studies regarding photodynamic antimicrobial therapy (aPDT). However, the great variety of protocols to be used can directly influence its effectiveness in reducing microorganisms. The aim of this randomized split-mouth clinical study was to evaluate the effect of aPDT in the reduction of Streptococcus mutans and their effect on restorations performed. Methods Twenty children between 6 and 8 years old with active caries and dentin cavitation, located on the occlusal surface of homologous primary molars were included. The selective removal of carious tissue was performed in both molars, than one was subsequently restored and the other received aPDT treatment on the affected dentin with low intensity laser (InGaAlP) associated to 0.005% methylene blue photosensitizer before restoration. Dentin collections were performed only in the tooth submitted to aPDT in three moments: before and after selective caries removal and after application of aPDT. The restorations were analyzed after polishing and after 6 months using United States Public Health Service (USPHS) method. Data were analyzed using ANOVA with repeated measures and Bonferroni post-hoc test with a significance level of 5%. Results There was a significant reduction on the amount of microorganisms after selective caries removal (p = 0.04) and also after the application of aPDT (p = 0.01). The reduction of S. mutans CFU was of 76.4% after caries removal, but associated with aPDT was 92.6%. After 6 months of clinical evaluation, no difference between groups was found for retention, marginal adaptation, color, marginal discoloration, and secondary caries. Conclusions aPDT can be used as an additional treatment against cariogenic microorganisms after selective caries removal without compromising composite resin restorations.

Literature has reported positive results regarding the use of lasers in the control of erosive lesions; however, evaluating whether they are effective in the control of the progression of erosive/abrasive lesions is important. Objectives This study aimed to evaluate the effect of the Er:YAG laser irradiation in controlling the progression of erosion associated with abrasive lesions in enamel. Material and methods Bovine incisors were sectioned, flattened and polished. Forty-eight enamel slabs were subjected to treatment in an intraoral phase. Twelve volunteers used an intraoral appliance containing one slab that was irradiated with an Er:YAG laser (5.2 J/cm2, 85 mJ, 2 Hz) and another non-irradiated slab on each side of the appliance, during one phase of 5 d, under a split-mouth design. Devices were subjected to erosive challenges (1% citric acid, 5 min, 3 times a day) and abrasive challenges one h after (brushing force of 1.5 N for 15 s) randomly and independently on each side of the device. Measurements of enamel loss were performed via 3D optical profilometry (μm). We analyzed data using the Kruskal-Wallis and Mann-Whitney tests and morphological characteristics via scanning electron microscopy. Results Following erosive and abrasive challenges, the group that was irradiated with the Er:YAG laser presented less loss of structure than the non-irradiated group. The group that underwent erosion and irradiation did not exhibit a significant difference from the non-irradiated group. Conclusion Irradiation with the Er:YAG laser did not control the loss of structure of enamel subjected to erosion but did control abrasion after erosion.

This study evaluated the combined effect of fluoride varnish and Er:YAG laser on the permeability of eroded bovine root dentin. After initial erosive challenge followed by a remineralization period, the specimens were divided in two groups according to the treatment - fluoride varnish and non-fluoride varnish - and were subdivided according to the irradiation protocol: Er:YAG laser (100 mJ, 3 Hz, 12.8 J/cm2per pulse, non-contact and defocus mode) and non-irradiated. After a lead-in period, 7 volunteers wore a palatal device containing 4 specimens that were subjected to erosive challenges. At the first experimental phase, 4 volunteers used specimens treated with fluoride varnish and fluoride varnish+Er:YAG laser and 3 volunteers used specimens treated with non-fluoride varnish and non-fluoride varnish+Er:YAG laser. After a washout period, volunteers were crossed to treatments, characterizing a 2x2 crossover experiment. At the end of the experimental phase, the quantitative response variable was obtained by permeability analysis and the qualitative response by scanning electron microscopy (SEM). Two-way ANOVA and Tukey-Kramer's test revealed that specimens treated with fluoride varnish+Er:YAG laser showed the lowest permeability and a significant difference was found between this group and the others. When varnish (fluoride/non-fluoride) was applied in the absence of Er:YAG laser, higher permeability was found when compared to the laser-treated groups. SEM evaluations showed partially or completely obliterated dentinal tubules when specimens were treated with fluoride varnish+Er:YAG laser. It may be concluded that Er:YAG laser was able to control the permeability of eroded root dentin and the combination with fluoride varnish increased laser action. Resumo Esse estudo avaliou o feito combinado do verniz fluoretado ao laser de Er:YAG na permeabilidade da dentina radicular erodida. Fragmentos de dentina radicular bovina, foram submetidos a um desafio erosivo inicial com ácido cítrico, que foi seguido por um período de remineralização. Posteriormente, os espécimes foram divididos em relação aos tratamentos: verniz (fluoretado e não fluoretado) e subdivididos de acordo com a irradiação: laser de Er:YAG (100 mJ, 3 Hz, 12.8 J/cm2 por pulso, sem contato e modo não focado) e não irradiado. Após um período de lead in, 7 voluntários utilizaram um dispositivo palatino contendo 4 espécimes que foram submetidos a desafios erosivos. Na primeira fase do experimento, 4 voluntários utilizaram dispositivos com fragmentos tratados com verniz fluoretado e verniz fluoretado+laser de Er:YAG e 3 voluntários utilizaram espécimes tratados com verniz não fluoretado e verniz não fluoretado+laser de Er:YAG. Depois de um período de wash-out, os voluntários foram cruzados em relação aos tratamentos, caracterizando um experimento cross-over 2x2. Ao final de cada fase experimental, a variável resposta quantitativa foi obtida através da análise de permeabilidade e a qualitativa por microscopia eletrônica de varredura (MEV). A ANOVA dois critérios e teste de Tukey-Kramer revelou que as amostras tratadas com verniz fluoretado+laser de Er:YAG mostraram menor permeabilidade e uma diferença significativa foi encontrada entre este grupo, quando comparado aos demais grupos. Quando o verniz (fluoretado/não fluoretado) foram aplicados na ausência do laser de Er:YAG maiores valores de permeabilidade foram encontrados quando comparados com os grupos irradiados com o laser. A MEV demostrou túbulos dentinários parcialmente ou completamente ocluídos quando as amostras foram tratadas com verniz fluoretado+laser de Er: YAG. Pode-se concluir que o laser de Er:YAG foi capaz de controlar a permeabilidade da dentina radicular erodida e essa ação é aumentada quando o laser está associado ao verniz fluoretado.