Search

The work behind this paper takes place in the EFDA's European Goal Oriented Training programme on Remote Handling (RH) “GOT-RH”. The programme aims to train engineers for activities supporting the ITER project and the long-term fusion programme. One of the projects of this programme focuses on the verification and validation (V&V) of ITER RH system requirements using digital mock-ups (DMU). The purpose of this project is to study and develop efficient approach of using DMUs in the V&V process of ITER RH system design utilizing a System Engineering (SE) framework. Complex engineering systems such as ITER facilities lead to substantial rise of cost while manufacturing the full-scale prototype. In the V&V process for ITER RH equipment, physical tests are a requirement to ensure the compliance of the system according to the required operation. Therefore it is essential to virtually verify the developed system before starting the prototype manufacturing phase. This paper gives an overview of the current trends in using digital mock-up within product design processes. It suggests a simulation-based process design centralized around a simulation lifecycle management system. The purpose of this paper is to describe possible improvements in the formalization of the ITER RH design process and V&V processes, in order to increase their cost efficiency and reliability. [ABSTRACT FROM AUTHOR]

This paper is part of the EFDAs European goal oriented training program on remote handling (RH) GOT-RH. The program aims to train engineers for activities supporting the ITER project and the long-term fusion program. This paper is written based on the results of a project verification and validation (V&V) of ITER RH system using digital mock-ups (DMUs). The purpose of this project is to study an efficient approach of using DMU for the V&V of the ITER RH system design using a system engineering framework. This paper gives an overview of the current trends in product and simulation lifecycle management (PLM/SLM) in the industry. This paper suggests a design verification process centralized around a collaboration platform. The purpose of this paper aims at improving and formalizing the ITER RH design process together with the V&V process. The objective of the suggested process is to improve the cost efficiency and reliability of ITER RH systems. [ABSTRACT FROM PUBLISHER]

The replacement strategy of the massive Multi-Module Blanket Segments (MMS) is a key driver in the design of several DEMO systems. These include the blankets themselves, the vacuum vessel (VV) and its ports and the Remote Maintenance System (RMS). Common challenges to any blanket attachment system have been identified, such as the need for applying a preload to the MMS manifold, the effects of the decay heat and several uncertainties related to permanent deformations when removing the blanket segments after service. The WP12 kinematics of the MMS in-vessel transportation was adapted to the requirements of each of the supports during 2013 and 2014 design activities. The RM equipment envisaged for handling attachments and earth connections may be composed of up to three different assemblies. An In-Vessel Mover at the divertor level handles the lower support and earth bonding, and could stabilize the MMS during transportation. A Shield Plug crane with a 6 DoF manipulator operates the upper attachment and earth straps. And a Vertical Maintenance Crane is responsible for the in-vessel MMS transportation and can handle the removable upper support pins. A final proposal is presented which can potentially reduce the number of required systems, at the same time that speeds-up the RMS global operations. [ABSTRACT FROM AUTHOR]