231 results on '"Shyam, Amit"'
Search Results
2. Dual X-ray computed tomography-aided classification of melt pool boundaries and flaws in crept additively manufactured parts
3. The many faces of θ'-Al2Cu precipitates: Energetics of pristine and solute segregated Al/θ' semi-coherent interfaces
4. Effect of microalloying additions on microstructural evolution and thermal stability in cast Al-Ni alloys
5. An additively manufactured near-eutectic Al-Ce-Ni-Mn-Zr alloy with high creep resistance
6. Creep deformation and cavitation in an additively manufactured Al-8.6Cu-0.4Mn-0.9Zr (wt%) alloy
7. Solute-Vacancy Clustering in Aluminum
8. Effect of Mn on eutectic phase equilibria in Al-rich Al-Ce-Ni alloys
9. Microstructure and strengthening of Al-6Ce-3Ni-0.7Fe (wt%) alloy manufactured by laser powder-bed fusion
10. Microstructure and mechanical properties of hypoeutectic Al–6Ce–3Ni-0.7Fe (wt.%) alloy
11. 3D Printed eutectic aluminum alloy has facility for site-specific properties
12. Additively manufactured Al-Ce-Ni-Mn alloy with improved elevated-temperature fatigue resistance
13. First-principles study of Al/Al3Ni interfaces
14. Phase stability in cast and additively manufactured Al-rich Al-Cu-Ce alloys
15. Microstructure, deformation and fracture mechanisms in Al-4043 alloy produced by laser hot-wire additive manufacturing
16. Repurposing the θ (Al2Cu) phase to simultaneously increase the strength and ductility of an additively manufactured Al–Cu alloy
17. Dislocation-θ′ (Al2Cu) interactions during creep deformation of an Al-Cu alloy
18. Effect of grain-boundary θ-Al2Cu precipitates on tensile and compressive creep properties of cast Al–Cu–Mn–Zr alloys
19. Microstructural evolution and strengthening mechanisms in a heat-treated additively manufactured Al–Cu–Mn–Zr alloy
20. Cavitation-resistant intergranular precipitates enhance creep performance of θ′-strengthened Al-Cu based alloys
21. A creep-resistant additively manufactured Al-Ce-Ni-Mn alloy
22. Heat-resistant aluminium alloys
23. Al-Cu-Ce(-Zr) alloys with an exceptional combination of additive processability and mechanical properties
24. Elevated temperature ductility dip in an additively manufactured Al-Cu-Ce alloy
25. The role of Si in determining the stability of the θ′ precipitate in Al-Cu-Mn-Zr alloys
26. Crystallographic orientation-dependent strain hardening in a precipitation-strengthened Al-Cu alloy
27. Aging behavior and strengthening mechanisms of coarsening resistant metastable θ' precipitates in an Al–Cu alloy
28. Influence of copper content on the high temperature tensile and low cycle fatigue behavior of cast Al-Cu-Mn-Zr alloys
29. Deformation and failure of PrintCast A356/316 L composites: Digital image correlation and finite element modeling
30. The synergistic role of Mn and Zr/Ti in producing θ′/L12 co-precipitates in Al-Cu alloys
31. Effect of copper content on the tensile elongation of Al–Cu–Mn–Zr alloys: Experiments and finite element simulations
32. Impact of microstructural stability on the creep behavior of cast Al–Cu alloys
33. Effect of MicroalloyinG Additions on Microstructural Evolution and Thermal Stability in Cast Al-Ni Alloys
34. Mechanisms for stabilizing θ′(Al2Cu) precipitates at elevated temperatures investigated with phase field modeling
35. High temperature materials for heavy duty diesel engines: Historical and future trends
36. Temperature-dependent stability of θ′-Al2Cu precipitates investigated with phase field simulations and experiments
37. Micromechanical modeling of non-linear stress-strain behavior of polycrystalline microcracked materials under tension
38. Structural deformation and transformation of θ′-Al2Cu precipitate in Al matrix via interfacial diffusion
39. Hot-Tearing of Multicomponent Al-Cu Alloys Based on Casting Load Measurements in a Constrained Permanent Mold
40. Mesostructure and porosity effects on the thermal conductivity of additively manufactured interpenetrating phase composites
41. Solute segregation at the Al/θ′-Al2Cu interface in Al-Cu alloys
42. Lattice mismatch modeling of aluminum alloys
43. Damage-tolerant metallic composites via melt infiltration of additively manufactured preforms
44. The effects of microstructural stability on the compressive response of two cast aluminum alloys up to 300 °C
45. Feasibility Study of Making Metallic Hybrid Materials Using Additive Manufacturing
46. Hot-Tearing Assessment of Multicomponent Nongrain-Refined Al-Cu Alloys for Permanent Mold Castings Based on Load Measurements in a Constrained Mold
47. Microstructure and Mechanical Properties of Hypoeutectic Al-6ce-3ni-0.7fe (Wt.%) Alloy
48. Load shuffling during creep deformation of an additively manufactured AlCuMnZr alloy
49. Microstructure and Strengthening of Al-6ce-3ni-0.7fe (Wt%)Alloymanufactured by Laser Powder-Bed Fusion
50. In-situ Young's moduli of the constitutive layers in a solid oxide fuel cell
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.