Search

We report the slow-light enhanced spin-resolved in-plane emission from a single quantum dot (QD) in a photonic crystal waveguide (PCW). The slow light dispersions in PCWs are designed to match the emission wavelengths of single QDs. The resonance between two spin states emitted from a single QD and a slow light mode of a waveguide is investigated under a magnetic field with Faraday configuration. Two spin states of a single QD experience different degrees of enhancement as their emission wavelengths are shifted by combining diamagnetic and Zeeman effects with an optical excitation power control. A circular polarization degree up to 0.81 is achieved by changing the off-resonant excitation power. Strongly polarized photon emission enhanced by a slow light mode shows great potential to attain controllable spin-resolved photon sources for integrated optical quantum networks on chip., 7 pages,5 figures

Chiral light-matter interactions supported by topological edge modes at the interface of valley photonic crystals provide a robust method to implement the unidirectional spin transfer. The valley topological photonic crystals possess a pair of counterpropagating edge modes. The edge modes are robust against the sharp bend of $60^{\circ}$ and $120^{\circ}$, which can form a resonator with whispering gallery modes. Here, we demonstrate the asymmetric emission of chiral coupling from single quantum dots in a topological resonator by tuning the coupling between a quantum emitter and a resonator mode. Under a magnetic field in Faraday configuration, the exciton state from a single quantum dot splits into two exciton spin states with opposite circularly polarized emissions due to Zeeman effect. Two branches of the quantum dot emissions couple to a resonator mode in different degrees, resulting in an asymmetric chiral emission. Without the demanding of site-control of quantum emitters for chiral quantum optics, an extra degree of freedom to tune the chiral contrast with a topological resonator could be useful for the development of on-chip integrated photonic circuits., Comment: 13 pages, 4 figures

We propose a design on integrated optical devices on-chip with an extra width degree of freedom by using a photonic crystal waveguide with Dirac points between two photonic crystals with opposite valley Chern numbers. With such an extra waveguide, we demonstrate numerically that the topologically protected photonic waveguide retains properties of valley-locking and immunity to defects. Due to the design flexibility of the width-tunable topologically protected photonic waveguide, many unique on-chip integrated devices have been proposed, such as energy concentrators with a concentration efficiency improvement of more than one order of magnitude, and a topological photonic power splitter with an arbitrary power splitting ratio. The topologically protected photonic waveguide with the width degree of freedom could be beneficial for scaling up photonic devices, and provides a flexible platform to implement integrated photonic networks on-chip.

Single charge control of localized excitons (LXs) in two-dimensional transition metal dichalcogenides (TMDCs) is crucial for potential applications in quantum information processing and storage. However, traditional electrostatic doping method with applying metallic gates onto TMDCs may cause the inhomogeneous charge distribution, optical quench, and energy loss. Here, by locally controlling the ferroelectric polarization of the ferroelectric thin film BiFeO3 (BFO) with a scanning probe, we can deterministically manipulate the doping type of monolayer WSe2 to achieve the p-type and n-type doping. This nonvolatile approach can maintain the doping type and hold the localized excitonic charges for a long time without applied voltage. Our work demonstrated that ferroelectric polarization of BFO can control the charges of LXs effectively. Neutral and charged LXs have been observed in different ferroelectric polarization regions, confirmed by magnetic optical measurement. Highly circular polarization degree about 90 % of the photon emission from these quantum emitters have been achieved in high magnetic fields. Controlling single charge of LXs in a non-volatile way shows a great potential for deterministic photon emission with desired charge states for photonic long-term memory., Comment: 13 pages, 5 figures

Chiral light-matter interaction between photonic nanostructures with quantum emitters shows great potential to implement spin-photon interfaces for quantum information processing. Position-dependent spin momentum locking of the quantum emitter is important for these chiral coupled nanostructures. Here, we report the position-dependent chiral coupling between quantum dots (QDs) and cross waveguides both numerically and experimentally. Four quantum dots distributed at different positions in the cross section are selected to characterize the chiral properties of the device. Directional emission is achieved in a single waveguide as well as in both two waveguides simultaneously. In addition, the QD position can be determined with the chiral contrasts from four outputs. Therefore, the cross waveguide can function as a one-way unidirectional waveguide and a circularly polarized beam splitter by placing the QD in a rational position, which has potential applications in spin-to-path encoding for complex quantum optical networks at the single-photon level., 13 pages, 4 figures

Slow light in topological valley photonic crystal structures offers new possibilities to enhance light-matter interaction. We report a topological cavity based on slow light topological edge mode for broadband Purcell enhancement. The topological edge modes with large group indices over 100 can be realized with a bearded interface between two topologically distinct valley photonic crystals, featuring the greatly enhanced Purcell factor because of the increased local density of states. In the slow light regime, the topological cavity supports much more cavity modes with higher quality factor than that in the fast light regime, which is both demonstrated theoretically and experimentally. We demonstrate the cavity enables the broadband Purcell enhancement together with substantial Purcell factor, benefiting from dense cavity modes with high quality factor in a wide spectral range. It has great benefit to the realization of high-efficiency quantum-dot-based single-photon sources and entangled-photon sources with less restriction on spectral match. Such topological cavity could serve as a significant building block toward the development of photonic integrated circuits with embedded quantum emitters., Comment: 16 pages, 4 figures

The second-order topological photonic crystal with 0D corner state provides a new way to investigate cavity quantum electrodynamics and develop topological nanophotonic devices with diverse functionalities. Here, we report on the optimization and robustness of topological corner state in the second-order topological photonic crystal both in theory and in experiment. The topological nanocavity is formed based on the 2D generalized Su-Schrieffer-Heeger model. The quality factor of corner state is optimized theoretically and experimentally by changing the gap between two photonic crystals or just modulating the position or size of the airholes surrounding the corner. The fabricated quality factors are further optimized by the surface passivation treatment which reduces surface absorption. A maximum quality factor of the fabricated devices is about 6000, which is the highest value ever reported for the active topological corner state. Furthermore, we demonstrate the robustness of corner state against strong disorders including the bulk defect, edge defect, and even corner defect. Our results lay a solid foundation for the further investigations and applications of the topological corner state, such as the investigation of strong coupling regime and the development of optical devices for topological nanophotonic circuitry., Comment: 13 pages, 9 figures

The topological lasers, which are immune to imperfections and disorders, have been recently demonstrated based on many kinds of robust edge states, being mostly at microscale. The realization of 2D on-chip topological nanolasers, having the small footprint, low threshold and high energy efficiency, is still to be explored. Here, we report on the first experimental demonstration of the topological nanolaser with high performance in 2D photonic crystal slab. Based on the generalized 2D Su-Schrieffer-Heeger model, a topological nanocavity is formed with the help of the Wannier-type 0D corner state. Laser behaviors with low threshold about 1 $\mu W$ and high spontaneous emission coupling factor of 0.25 are observed with quantum dots as the active material. Such performance is much better than that of topological edge lasers and comparable to conventional photonic crystal nanolasers. Our experimental demonstration of the low-threshold topological nanolaser will be of great significance to the development of topological nanophotonic circuitry for manipulation of photons in classical and quantum regimes., Comment: 15 pages, 4 figures

We demonstrate a low-threshold topological nanolaser and the weak coupling to single quantum dot in the topological nanocavity, promoting the development of topological nanophotonic circuitry for the manipulation of photons in classical and quantum regimes. © 2020 The Author(s)

In single microdisks, embedded active emitters intrinsically affect the cavity modes of the microdisks, resulting in trivial symmetric backscattering and low controllability. Here we demonstrate macroscopic control of the backscattering direction by optimizing the cavity size. The signature of the positive and negative backscattering directions in each single microdisk is confirmed with two strongly coupled microdisks. Furthermore, diabolical points are achieved at the resonance of the two microdisks, which agrees well with theoretical calculations considering the backscattering directions. Diabolical points in active optical structures pave the way for an implementation of quantum information processing with geometric phase in quantum photonic networks., Diabolically good control over quantum emitters A system of tiny coupled disks developed by researchers in China and Scotland could provide control over the emission of individual photons for quantum computing. Single-photon emitters are required for passing information in quantum photonic networks, but it is very difficult to control the direction that photons are emitted or to stop neighboring emitters from interfering. Xiulai Xu at the Chinese Academy of Sciences and co-workers fabricated pairs of 1-micrometer-radius disks, surrounded by even smaller particles called quantum dots. By exciting the quantum dots with a laser, the researchers set up so-called diabolical points in the coupled microdisks. These points allow control over the backscattering of light, as a function of the distance between disks. The study not only provides a new platform for quantum information processing but could also enable controllable directional lasers.

Understanding the carrier excitation and transport processes at the single-charge level plays a key role in quantum-dot-based solar cells and photodetectors. Here, we report on Coulomb-induced giant photocurrent enhancement of positive charged trions (\emph{X$^+$}) in a single self-assembled InAs/GaAs quantum dot embedded in an \emph{n-i-}Schottky device by high-resolution photocurrent (PC) spectroscopy. The Coulomb repulsion between the two holes in the \emph{X$^+$} increases the tunneling rate of the hole, and the remaining hole can be reused as the initial state to regenerate \emph{X$^+$} again. This process brings the PC amplitude of \emph{X$^+$} up to 30 times larger than that of the neutral exciton. The analysis of the hole tunneling time gives the equivalent change of hole tunnel barriers caused by Coulomb interaction between two holes with a value of 8.05 meV during the tunneling process. Our work brings a fundamental understanding of energy conversion for solar cells in nanoscale to improve internal quantum efficiency for energy harvesting., Comment: 17 pages, 4 figures

We report on controllable cavity modes through controlling the backscattering by two identical scatterers. Periodic changes of the backscattering coupling between two degenerate cavity modes are observed with the angle between two scatterers and elucidated by a theoretical model using two-mode approximation and numerical simulations. The periodically appearing single-peak cavity modes indicate mode degeneracy at diabolical points. Then interactions between single quantum dots and cavity modes are investigated. Enhanced emission of a quantum dot with a six-fold intensity increase is obtained in a microdisk at a diabolical point. This method to control cavity modes allows large-scale integration, high reproducibility and fexible design of the size, location, quantity and shape for scatterers, which can be applied for integrated photonic structures with scatterer-modified light-matter interaction., 23 pages, 5 figures

We demonstrate the amplitude stabilization of a 2.85 THz quantum cascade laser with a graphene loaded split-ring-resonator array acting as an external amplitude modulator. The transmittance of the modulator can be actively changed by modifying the graphene conductivity via electrostatic back-gating. The modulator operates at room temperature and is capable of actively modulating the quantum cascade laser power level and thus stabilizing the power output via a proportional-integral-derivative feedback control loop. The stability was enhanced by more than 10 times through actively tuning the modulation. Furthermore, this approach can be used to externally control the laser power with a high level of stability.We demonstrate the amplitude stabilization of a 2.85 THz quantum cascade laser with a graphene loaded split-ring-resonator array acting as an external amplitude modulator. The transmittance of the modulator can be actively changed by modifying the graphene conductivity via electrostatic back-gating. The modulator operates at room temperature and is capable of actively modulating the quantum cascade laser power level and thus stabilizing the power output via a proportional-integral-derivative feedback control loop. The stability was enhanced by more than 10 times through actively tuning the modulation. Furthermore, this approach can be used to externally control the laser power with a high level of stability.

Investigating, using sources of stress questionnaire, coping style questionnaire, easy flow adjustment center depression scale and statistical analysis, to polytechnic students in universities of Tianjin will find out the status and characteristics of graduate employment stress, stress coping styles and negative impact. In order to help student successful, we should analyze the objective and subjective reasons of graduate employment pressure, explore the impact of their own factors on employment stress, study coping style on job stress, analyze the negative impact on students caused by Employment Pressure, and thus raise the strategy for stress of the employment.

Here we propose a macroscopical control of the backscattering direction by optimizing the cavity size. The backscattering directions are confirmed with two strongly-coupled microdisks and diabolical points are achieved at the resonance of two microdisks. © 2020 The Author(s)