Search

The use of water to reduce friction has always played a significant role in a wide range of areas ranging from biology to engineering. Many efforts have been made to extensively investigate the water behavior between two contacted surfaces, but its role in water-based friction remains incompletely understood.Herein, we utilize the sum-frequency generation (SFG) spectroscopy to identify interfacial water structures upon adjusting the wettability of titanium dioxide (TiOIt demonstrates that enhanced wettability induces higher friction on the TiO

Determination of molecular structures of organic-inorganic hybrid perovskite (OIHP) nanocrystals at the single-nanocrystal and ensemble levels is essential to understanding the mechanisms responsible for their size-dependent optoelectronic properties and the nanocrystal assembling process, but its detection is still a bit challenging. In this study, we demonstrate that femtosecond sum frequency generation (SFG) vibrational spectroscopy can provide a highly sensitive tool for probing the molecular structures of nanocrystals with a size comparable to the Bohr diameter (∼10 nm) at the single-nanocrystal level. The SFG signals are monitored using the spectral features of the phenyl group in (R-MBA)PbBr3 and (R-MBA)2PbI4 nanocrystals (MBA: methyl-benzyl-ammonium). It is found that the SFG spectra exhibit a strong resonant peak at 3067±3 cm−1 ( ν2 mode) and a weak shoulder peak at 3045±4 cm−1 ( ν7a mode) at the ensemble level, whereas a peak of the ν2 mode and a peak at 3025±3 cm−1 ( ν20b mode) at the single-nanocrystal level. The nanocrystals at the single-nanocrystal level tend to lie down on the surface, but stand up as the ensemble number and the averaged sizes increase. This finding may provide valuable information on the structural origins for size-dependent photo-physical properties and photoluminescence blinking dynamics in nanocrystals.

Surface plasmon-enhanced vibrational spectroscopy has been demonstrated to be an important highly sensitive diagnostic technique, but its enhanced mechanism is yet to be explored. In this study, we couple femtosecond sum frequency generation vibrational spectroscopy (SFG-VS) with surface plasmon generated by the excitation of localized gold nanorods/nanoparticles and investigate the plasmonically enhanced factors (EFs) of SFG signals from poly(methyl methacrylate) films. Through monitoring the SFG intensity of carbonyl and ester methyl groups, we have established a correlation between EFs and the coupling of localized surface plasmon resonance with SFG and visible beams. It is found that the total enhanced factor is approximately proportional to the square of an enhanced factor of the SFG electromagnetic field and the fourth power of the enhanced factor of the visible electromagnetic field. The local field effect is roughly expressed to be the square of an enhanced factor of the visible electromagnetic field. This finding will help to guide the experimental design of plasmon-enhanced SFG to drastically improve the detection sensitivity and thus provide greater insight into the ultrafast dynamics near plasmonic surfaces.

Molecular structures of hole transport materials (HTMs) have significant impact on the optoelectronic properties of perovskite/HTM heterojunction. But the structure-property relationship in the heterojunction remains poorly understood. By using poly(3-alkylthiophene) (P3AT) as the HTM model, here we apply sum frequency generation vibrational spectroscopy to establish correlations among conformations of P3ATs, the hole extraction ability of P3ATs from the perovskite layer, and the charge mobility of P3ATs. It is revealed that with similar energy-level alignment, the conformational order of alkyl side chains in regioregular P3ATs can effectively regulate the hole extraction ability of P3ATs from perovskite layer by tuning reorganization energy. By contrast, the charge mobility of P3ATs strongly depends on the P3AT backbone's coplanarity. Our findings decouple the roles of the long-hidden conformational order of alkyl side chain and the polythiophene backbone's coplanarity on the performance of perovskite/HTM heterojunction, offering useful guidelines for boosting the performance of optoelectronic devices.

We demonstrate that an ordered 2D perovskite can significantly boost the photoelectric performance of 2D/3D perovskite heterostructures. Using selective fluorination of phenyl-ethyl ammonium (PEA) lead iodide to passivate 3D FA0.8Cs0.2PbI3, we find that the 2D/3D perovskite heterostructures passivated by a higher ordered 2D perovskite have lower Urbach energy, yielding a remarkable increase in photoluminescence (PL) intensity, PL lifetime, charge-carrier mobilities (φµ), and carrier diffusion length (LD) for a certain 2D perovskite content. High performance with an ultralong PL lifetime of ~1.3 µs, high φµ of ~18.56 cm2V-1s-1, and long LD of ~7.85 µm is achieved in the 2D/3D films when passivated by 16.67% para-fluoro-PEA2PbI4. This carrier diffusion length is comparable to that of some perovskite single crystals (5 µm). These findings provide key missing information on how the organic cations of 2D perovskites influence the performance of 2D/3D perovskite heterostructures.

Sum frequency generation vibrational spectroscopy (SFG-VS) is a powerful technique for determining molecular structures at both buried interface and air surface. Distinguishing the contribution of SFG signals from buried interface and air surface is crucial to the applications in devices such as microelectronics and bio-tips. Here we demonstrate that the SFG spectra from buried interface and air surface can be differentiated by controlling the film thickness and employment of surface-plasmon enhancement. Using substrate-supported PMMA (poly(methyl methacrylate)) films as a model, we have visualized the variations in the contribution of SFG signals from buried interface and air surface. By monitoring carbonyl and C-H stretching groups, we found that SFG signals are dominated by the moieties (-CH2, -CH3, -OCH3 and C=O) segregated at the PMMA/air surface for the thin films while they are mainly contributed by the groups (-OCH3 and C=O) at the substrate/PMMA buried interface for the thick films. At the buried interface, the tilt angle of C=O decreases from 65° to 43° as the film preparation concentration increases; in contrast, the angles at the air surface fall in the range from 38° to 21°. Surface plasmon generated by gold nanorods can largely enhance SFG signals, particularly the signals from the buried interface.

Membrane fusion of the viral and host cell membranes is the initial step of virus infection and is catalyzed by fusion peptides. Although the β-sheet structure of fusion peptides has been proposed to be the most important fusion-active conformation, it is still very challenging to experimentally identify different types of β-sheet structures at the cell membrane surface in situ and in real time. In this work, we demonstrate that the interface-sensitive amide II spectral signals of protein backbones, generated by the sum frequency generation vibrational spectroscopy, provide a sensitive probe for directly capturing the formation of oligomeric β-sheet structure of fusion peptides. Using human immunodeficiency virus (HIV) glycoprotein GP41 fusing peptide (FP23) as the model, we find that formation speed of oligomeric β-sheet structure depends on lipid unsaturation. The unsaturated lipid such as POPG can accelerate formation of oligomeric β-sheet structure of FP23. The β-sheet structure is more deeply inserted into the hydrophobic region of the POPG bilayer than the α-helical segment. This work will pave the way for future researches on capturing intermediate structures during membrane fusion processes and revealing the fusion mechanism.

Two-dimensional spontaneous reactions between an electrode and an electrolyte are very important for the formation of a solid electrolyte interphase (SEI) but difficult to study because studying such reactions requires surface/interface sensitive techniques with sufficiently structural and temporal resolutions. In this study, we have applied femtosecond broadband sum-frequency generation vibrational spectroscopy (SFG-VS) to investigate the interaction between a silicon electrode and a LiPF

The diagonal anharmonicity of an amide I mode of protein backbones plays a critical role in a protein’s vibrational dynamics and energy transfer. However, this anharmonicity of long-chain peptides and proteins in H2O environment is still lacking. Here, we investigate the anharmonicity of the amide I band of proteins at the lipid membrane/H2O interface using a surface-sensitive pump–probe setup in which a femtosecond infrared pump is followed by a femtosecond broadband sum frequency generation vibrational spectroscopy probe. It is found that the anharmonicity of the amide I mode in ideal α-helical and β-sheet structures at hydrophobic environments is 3–4 cm−1, indicating that the amide I mode in ideal α-helical and β-sheet structures is delocalized over eight peptide bonds. The anharmonicity increases as the bandwidth of the amide I mode increases due to the exposure of peptide bonds to H2O. More H2O exposure amounts lead to a larger anharmonicity. The amide I mode of the peptides with large H2O exposure amounts is localized in one to two peptide bonds. Our finding reveals that the coupling between the amide I mode and the H2O bending mode does not facilitate the delocalization of the amide I mode along the peptide chain, highlighting the impact of H2O on energy transfer and structural dynamics of proteins.

Hydrophobic-like water monolayers have been predicted at the metal and some polar surfaces by theoretical simulations. However, direct experimental evidence for the presence of this water layer at surfaces, particularly at biomolecule and polymer surfaces, is yet to be validated at room temperature. Here we observe experimentally that an ordered molecular water layer is present at the hydrophobic fluorinated polymer such as polytetrafluoroethylene (PTFE) surface by using sum frequency generation vibrational spectroscopy. The macroscopic hydrophobicity of PTFE surface is actually hydrophilic at the molecular level. The macroscopically hydrophobic character of PTFE is indeed resulting from the hydrophobicity of the ordered two-dimension (2D) water layer, in which cyclic water tetramer structure is found. The water layer at humidity of ≤40% has a vibrational relaxation time of 550 ± 60 fs. The vibrational relaxation time in the frequency range of 3200-3400 cm-1 shows remarkable difference from the interfacial water at the air/H2O interface and the lipid/H2O interface. No discernible frequency dependence of the vibrational relaxation time is observed, indicating the homogeneous dynamics of OH groups in the water layer. These insights into the water layer at the macroscopically hydrophobic surface may contribute to a better understanding of the hydrophobic interaction and interfacial water dynamics.

The origin of the sum-frequency generation (SFG) signal of the water bending mode has been controversially debated in the past decade. Unveiling the origin of the signal is essential, because different assignments lead to different views on the molecular structure of interfacial water. Here, we combine collinear heterodyne-detected SFG spectroscopy at the water-charged lipid interfaces with systematic variation of the salt concentration. The results show that the bending mode response is of a dipolar, rather than a quadrupolar, nature and allows us to disentangle the response of water in the Stern and the diffuse layers. While the diffuse layer response is identical for the oppositely charged surfaces, the Stern layer responses reflect interfacial hydrogen bonding. Our findings thus corroborate that the water bending mode signal is a suitable probe for the structure of interfacial water.

The chemical nature of the organic cations governs the optoelectronic properties of two-dimensional organic-inorganic perovskites. But its mechanism is not fully understood. Here, we apply femtosecond broadband sum frequency generation vibrational spectroscopy to investigate the molecular conformation of spacer organic cations in two-dimensional organic-inorganic perovskite films and establish a correlation among the conformation of the organic cations, the charge carrier mobility, and broadband emission. Our study indicates that both the mobility and broadband emission show strong dependence on the molecular conformational order of organic cations. The gauche defect and local chain distortion of organic cations are the structural origin of the in-plane mobility reduction and broad emission in two-dimensional organic-inorganic perovskites. Both of the interlayer distance and the conformational order of the organic cations affect the out-of-plane mobility. This work provides molecular-level understanding of the conformation of organic cations in optimizing the optoelectronic properties of two-dimensional organic-inorganic perovskites., Understanding the correlation between molecular structure and properties of 2D hybrid perovskites is crucial for material design and device performance. Here, the authors reveal that conformation of organic cations in the inorganic cages has strong effects on charge mobility and broadband emission behaviour.

Characterization of conformation kinetics of proteins at the interfaces is crucial for understanding the biomolecular functions and the mechanisms of interfacial biological action. But it requires to capture the dynamic structures of proteins at the interfaces with sufficient structural and temporal resolutions. Here, we demonstrate that a femtosecond sum frequency generation vibrational spectroscopy (SFG-VS) system developed by our group provides a powerful tool for monitoring the real-time peptide transport across the membranes with time resolution of less than one second. By probing the real-time SFG signals in the amide I and amide A bands as WALP23 interacts with DMPG lipid bilayer, it is found that WALP23 is initially absorbed at the gel-phase DMPG bilayer with a random coil structure. The absorption of WALP23 on the surface leads to the surface charge reversal and thus changes the orientation of membrane-bound water. As the DMPG bilayer changes from gel phase into fluid phase, WALP23 inserts into the fluid-phase bilayer with its N-terminal end moving across the membrane, which causes the membrane dehydration and the transition of WALP23 conformation from random coil to mixed helix/loop structure and then to pure α-helical structure. The established system is ready to be employed in characterizing other interfacial fast processes, which will be certainly helpful for providing a clear physical picture of the interfacial phenomena.

We have investigated specific ion effects on protein thermal aggregation from dilute solutions to crowded environments. Ovalbumin and poly(ethylene glycol) have been employed as the model protein and crowding agent, respectively. Our studies demonstrate that the rate-limiting step of ovalbumin thermal aggregation is changed from the aggregation of unfolded protein molecules to the unfolding of the protein molecules, when the solution conditions are varied from a dilute solution to a crowded environment. The specific ion effects acting on the thermal aggregation of ovalbumin generated by kosmotropic and chaotropic ions are different. The thermal aggregation of ovalbumin molecules is promoted by kosmotropic anions in dilute solutions via an increase in protein hydrophobic interactions. In contrast, ovalbumin thermal aggregation is facilitated by chaotropic ions in crowded environments through accelerated unfolding of protein molecules. Therefore, there are distinct mechanisms causing the ion specificities of protein thermal aggregation between dilute solutions and crowded environments. The ion specificities are dominated by ion-specific hydrophobic interactions between protein molecules and ion-specific unfolding of protein molecules in dilute solutions and crowded environments, respectively.

Characterization of real-time and ultrafast motions of the complex molecules at surface and interface is critical to understand how interfacial molecules function. It requires to develop surface-sensitive, fast-identification, and time-resolved techniques. In this study, we employ several key technical procedures and successfully develop a highly sensitive femtosecond time-resolved sum frequency generation vibrational spectroscopy (SFG-VS) system. This system is able to measure the spectra with two polarization combinations (ssp and ppp, or psp and ssp) simultaneously. It takes less than several seconds to collect one spectrum. To the best of our knowledge, it is the fastest speed of collecting SFG spectra reported by now. Using the time-resolved measurement, ultrafast vibrational dynamics of the N-H mode of α-helical peptide at water interface is determined. It is found that the membrane environment does not affect the N-H vibrational relaxation dynamics. It is expected that the time-resolved SFG system will play a vital role in the deep understanding of the dynamics and interaction of the complex molecules at surface and interface. Our method may also provide an important technical proposal for the people who plan to develop time-resolved SFG systems with simultaneous measurement of multiple polarization combinations.

Vibrational energy transfer (VET) of proteins at cell membrane plays critical roles in controlling the protein functionalities, but its detection is very challenging. By using a surface-sensitive femtosecond time-resolved sum-frequency generation vibrational spectroscopy with infrared pump, the detection of the ultrafast VET in proteins at cell membrane has finally become possible. The vibrational relaxation time of the N-H groups is determined to be 1.70(±0.05) ps for the α-helix located in the hydrophobic core of the lipid bilayer and 0.9(±0.05) ps for the membrane-bound β-sheet structure. The N-H groups with strong hydrogen bonding gain faster relaxation time. By pumping the amide A band and probing amide I band, the vibrational relaxation from N-H mode to C=O mode through two pathways (direct coupling and through intermediate states) is revealed. The ratio of the pathways depends on the NH⋅⋅⋅O=C hydrogen-bonding strength. Strong hydrogen bonding favors the coupling through intermediate states.

The pH response of pH-responsive cell-penetrating peptides in cell membrane is directly associated with many potential applications and cell activities such as drug delivery, membrane fusion, and protein folding, but it is still poorly understood. In this study, we used GALA as a model and applied sum frequency generation vibrational spectroscopy to systematically investigate the pH response of GALA in lipid bilayers with different hydrophobic length and lipid head groups. We determined the GALA structures in lipid bilayers by combining second-ordered amide I and amide III spectral signals, which can accurately differentiate the loop and α-helical structures at the interface. It is found that GALA can insert into fluid-phase lipid bilayers even at neutral pH, while lies down on the gel-phase lipid bilayer surface. Under acidic conditions, GALA inserts into both fluid-phase and gel-phase lipid bilayers. GALA adopts a mixed loop and α-helical structures in lipid bilayers. Besides, the reversible activation ...

The misfolding and aggregation of human islet amyloid polypeptide (hIAPP) at cell membrane has a close relationship with the development of type 2 diabetes (T2DM). This aggregation process is susceptible to various physiologically related factors, and systematic studies on condition-mediated hIAPP aggregation are therefore essential for a thorough understanding of the pathology of T2DM. In this study, we combined surface-sensitive amide I and amide II spectral signals from the protein backbone, generated simultaneously in a highly sensitive femtosecond broad-band sum frequency generation vibrational spectroscopy system, to examine the effect of environmental pH on the dynamical structural changes of hIAPP at membrane surface in situ and in real time. Such a combination can directly discriminate the formation of β-hairpin-like monomer and oligomer/fibril at the membrane surface. It is evident that, in an acidic milieu, hIAPP slows down its conformational evolution and alters its aggregation pathway, leading to the formation of off-pathway oligomers. When matured hIAPP aggregates are exposed to basic subphase, partial conversion from β-sheet oligomers into ordered β-sheet fibrillar structures is observed. When exposed to acidic environment, however, hIAPP fibrils partially converse into more loosely patterned β-sheet oligomeric structures.

The molecular structure and dynamics of organic molecules at the aqueous interface have attracted a number of investigations owing to their importance and specific nature. However, there are relatively few studies on the direct characterization of the molecular interactions at the air/water interface because they are extremely difficult to measure in experiments. In this study, we use dibutyl ester molecules (R1CO2R2O2CR1) as a model of organic molecules, and investigate their molecular structure and interactions using sum frequency generation vibrational spectroscopy. We demonstrate that the molecular interactions can be estimated by measuring the intensity ratio of the symmetric stretching (ν1) and Fermi resonant bands (2ν2) of methyl groups. Here, dibutyl ester molecules are widely used as plasticizers in polymers to improve the properties of the plastics and polymers. It is found that the orientation angles of the tailed methyl groups at the air/water interface decrease from 34° to 19° when the chain length of R2 increases from 0 to 8. The total intermolecular interactions of the dibutyl ester molecules decrease as the chain length of R2 increases because the van der Waals interactions between the hydrocarbon chains increase, while the hydrogen bond interactions between the carbonyl group and water molecules decrease. Our study demonstrates the stability of ester-based plasticizers in polymers can be well predicted from the intensity ratio of the ν1 and 2ν2 bands of methyl group. Such an intensity ratio can be thus used as an effective vibrational optical ruler for characterizing molecular interactions between plasticizers and polymers.

Understanding the transport behavior of the cholesterol molecules within a cell membrane is a key challenge in cell biology at present. Here, we have applied sum frequency generation vibrational spectroscopy to characterize the transport and organization of cholesterol in different kinds of planar solid-supported lipid bilayers by combining achiral- and chiral-sensitive polarization measurements. This method allows us to distinguish the organization of cholesterol in tail-to-tail, head-to-tail, head-to-head, and side-by-side manners. It is found that the movement of cholesterol in the lipid bilayer largely depends on the flip-flop rate of the phospholipid. The flip-flop dynamics of the phospholipid and cholesterol are synchronous. In the solid-supported zwitterionic phosphocholine lipid bilayer, the cholesterol molecules flip quickly from the distal leaflet to the neutral proximal leaflet of the bilayer and form tail-to-tail organization on both leaflets. The phosphocholine lipid and cholesterol show the same flip-flop rate. However, when the proximal leaflet is prepared using negative glycerol phospholipids, cholesterol organizes itself by mainly forming an α-β structure on the distal leaflet. Because of the strong interaction between the glycerol phospholipid and the substrate, no or only partial cholesterol molecules flip from the distal leaflet to the negatively charged proximal leaflet. However, the cholesterol molecules undergo flip-flop in the presence of salt solution because the ions weaken the interaction between the negative phospholipid and the substrate.

A good understanding of membrane protein folding at the molecular level requires an effective means to determine the dynamical structural changes on coil-to-helix transition within the cell membrane and as yet remains challenging. Herein, we demonstrate that the amide III spectral signals of the protein backbone, generated in the sum frequency generation vibrational spectroscopy, are a powerful tool to probe the protein folding processes within the membrane in situ, in real time, and without exogenous labels. The amide III signals are capable of separating the spectral profiles of the random-coil and α-helical structures at the interface. The intensity ratio of coil and helix peaks becomes a prime indicator that allows one to directly capture the dynamical change of the coil–helix transition. With this approach, using pardaxin as a model, the influence of lipid charge on the peptide folding degree at the cell membrane surface has been nicely elucidated. It is evident that the negative charge of the lipid ...

Accurate characterization of the aggregation and assembly of molecules at surfaces and interfaces is essential to understand molecular interactions and functionalities of molecular devices at interfaces. Sub-monolayer sensitive in situ methods are highly desirable to access the aggregation processes. In this study, using malachite green (MG, a commonly used conjugated molecule) chloride as a model, we demonstrate that analyzing the stability of second harmonic intensity is a powerful and sensitive method for determining the inhomogeneity of dye molecules at liquid interfaces in situ. The fluctuations correlate with surface domains and hence can be used to characterize the distributions of MG and MG aggregates. Moreover, we found that interfacial aggregation below the resolution of Brewster angle microscopy could still be detected with second harmonic generation analysis. Overall, this approach provides insight concerning the surface behavior of MG, and could be used for the aggregation analysis of other conjugated molecules.

Coherent degenerate infrared-infrared-visible sum frequency generation vibrational spectroscopy provides a powerful label-free probe for identifying the vibrational modes that are coupled through the electronic statesin situand in real time.

The directed, long-range and self-propelled transport of droplets on solid surfaces is crucial for many applications from water harvesting to bio-analysis1-9. Typically, preferential transport is achieved by topographic or chemical modulation of surface wetting gradients that break the asymmetric contact line and overcome the resistance force to move droplets along a particular direction10-16. Nonetheless, despite extensive progress, directional droplet transport is limited to low transport velocity or short transport distance. Here we report the high-velocity and ultralong transport of droplets elicited by surface charge density gradients printed on diverse substrates. We leverage the facile water droplet printing on superamphiphobic surfaces to create rewritable surface charge density gradients that stimulate droplet propulsion under ambient conditions17 and without the need for additional energy input. Our strategy provides a platform for programming the transport of droplets on flat, flexible and vertical surfaces that may be valuable for applications requiring a controlled movement of droplets17-19.

The balance of lipid-peptide and peptide-peptide interactions at cell membrane is essential to a large variety of cellular processes. In this study, we have experimentally demonstrated for the first time that sum frequency generation vibrational spectroscopy can be used to probe the peptide-peptide and lipid-peptide interactions in cell membrane in situ and in real time by determination of the line width of amide I band of protein backbone. Using a "benchmark" model of α-helical WALP23, it is found that the dominated lipid-peptide interaction causes a narrow line width of the amide I band, whereas the peptide-peptide interaction can markedly broaden the line width. When WALP23 molecules insert into the lipid bilayer, a quite narrow line width of the amide I band is observed because of the lipid-peptide interaction. In contrast, when the peptide lies down on the bilayer surface, the line width of amide I band becomes very broad owing to the peptide-peptide interaction. In terms of the real-time change in the line width, the transition from peptide-peptide interaction to lipid-peptide interaction is monitored during the insertion of WALP23 into 1,2-dipalmitoyl- sn-glycero-3-phospho-(1'- rac-glycerol) (DPPG) lipid bilayer. The dephasing time of a pure α-helical WALP23 in 1-palmitoyl-2-oleoyl- sn-glycero-3-phospho-(1'- rac-glycerol) and DPPG bilayer is determined to be 2.2 and 0.64 ps, respectively. The peptide-peptide interaction can largely accelerate the dephasing time.

We discovered for the first time that the influenza A virus M2TM tunes its conformational heterogeneity and structural plasticity to respond to environmental cues by undergoing a helix-to-loop transition, resolving controversies regarding the mechanism of proton conduction and plasticity of the M2TM in lipid bilayers.

Membrane domain formation plays a key role in various cellular functions and biological events. Lateral accumulation of lipids and proteins in biological membranes is one of the most important factors that control the domain formation. However, compared to numerous reports on the lipid aggregation or accumulation formed in the membranes composed of multiple components of lipids and cholesterol, the lipid accumulation in one-component phospholipid bilayer system is still rare. In this study, we demonstrate that short peptides can induce the lipid accumulation in a single-component zwitterionic lipid bilayer. By investigating the interaction between a short peptide of mastoparan (MP, a G-protein-activating peptide) and neutral phosphocholine lipid bilayers using sum frequency generation vibrational spectroscopy (SFG-VS), we have found that MP can cause a local accumulation of lipid molecules at the outer leaflet of the lipid bilayer, resulting in more than 10 times intensity increase in the signals from the...

Molecular insight into the interactions of two-dimensional (2D) materials at the interface is essential to understand the functionality of interfacial molecular devices. Yet it still remains elusive so far. Fermi resonant interaction is highly sensitive to the total molecular interactions. In this study, we used lipid 1,2-dimyristoyl-sn-glycero-3 -phospho-(1′-rac-glycerol) (sodium salt) (DMPG) monolayer as a model, and performed a systematic study to investigate the Fermi resonant interactions of 2D materials at the interface during liquid-expanded (LE) to liquid-condensed (LC) phase transition using multiplexed-polarization sum frequency generation vibrational spectroscopy (SFG-VS). It is found that the ratio (R1) between Fermi resonance and symmetric stretching mode of the tailed methyl groups sharply decreases during the phase transition. The sharp drop of R1 originates from the nonsynchronous change of the tail and head groups of the lipid. The tailed CH3 groups of DMPG locally accumulate at the air/w...

Potassium phosphate buffer solution has been widely used in the biological experiments, which represents an important process of the interaction between ions and biomolecules, yet the influences of potassium phosphate on biomolecules such as the cell membrane are still poorly understood at the molecular level. In this work, we have applied sum frequency generation vibrational spectroscopy and carried out a detailed study on the interaction between potassium phosphate buffer solution (PBS) and negative 1,2-dimyristoyl-d54-sn-glycero-3-[phospho-rac-(1-glycerol)] (d54-DMPG) lipid bilayer in real time. The PBS-induced dynamic change in the molecular structure of d54-DMPG lipid bilayer was monitored using the spectral features of CD2, CD3, lipid head phosphate, and carbonyl groups for the first time. It is found that K+ can bind to the cell membrane and cause the signal change of CD2, CD3, lipid head phosphate, and carbonyl groups quickly. Potassium PBS interacts with lipid bilayers most likely by formation of...

Accurate determination of intermolecular interaction forces at the surface and the interface is essential to identify the nature of interfacial phenomena such as absorption, interfacial assembly, and specific ion effect, but it still represents a major technical challenge. In this study, we proposed a novel method to deduce the interfacial interaction forces by using surface-sensitive second-order Fermi resonant signals, generated in sum frequency generation vibrational spectroscopy (SFG-VS). By investigating the influence of lipid chain length and intermolecular distance on the Fermi resonant signals of phospholipid monolayer at the air/CaF2 surface and the air/water interface, a linear correlation between the Fermi resonant intensity ratio and the dominated interactions in the lipid monolayer has been observed. It implies that the amplitude of the intensity ratio can be used as an effective in situ vibrational optical ruler to characterize the total intermolecular interaction forces at the surface and t...

Dehydration of a surface is the first step for the interaction between biomolecules and the surface. In this study, we systematically investigated the influence of cholesterol analog 6-ketocholestanol (6-KC) on the dehydration of model cell membrane, using sum frequency generation vibrational spectroscopy. In pure DI water environment, two separate dehydration dynamic components were observed in neutrally charged and isotopically labeled 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and positively charged 1,2-dimyristoyl-sn-glycero-3-ethylphosphocholine(chloride salt) (DMEPC) bilayer: a large-amplitude fast component and a small-amplitude slow component, which originated from the water molecules with a weak and a strong water-membrane bound strengths, respectively. Dehydration of a negatively charged mixed DMPC/DMPG bilayer lead to the membrane-bound water being reorganized to ordered structures quickly. It is evident that the water-membrane bound strengths depend largely on the charge status of the lipid and has an order of neutrally charged membrane≪positively charged membrane≪negatively charged membrane. In an ionic environment, KCl solution can not only dehydrate DMPC bilayer, but also prevent the 6-KC from further dehydrating this model cell membrane. We observed that the dehydration dynamics behavior of DMPC bilayer in the presence of the chaotropic anions is similar to that of the negatively charged DMPG bilayer because of the penetration of chaotropic anions into the DMPC bilayer. The degree of dehydration difficulty in kosmotropic anions follows a Hofmeister series and linearly correlates with the hydration Gibbs free energy of the anions. Our results provide a molecular basis for the interpretation of the Hofmeister effect of kosmotropic anions on ion transport proteins.

The interactions between amino acids (AAs) and membranes represent various short-range and long-range interactions for biological phenomena; however, they are still poorly understood. In this study, we used cationic lysine and arginine as AA models, and systematically investigated the interactions between charged AAs and lipid bilayers using sum frequency generation vibrational spectroscopy (SFG-VS) in situ and in real time. The AA-induced dynamic structural changes of the lipid bilayer were experimentally monitored using the spectral features of CD2, CD3, the lipid head phosphate, and carbonyl groups in real time. Time-dependent SFG changes in the structure of the lipid bilayer provide direct evidence for the different interactions of lysine and arginine with the membrane. It was found that the discrepancy between lysine and arginine in binding with the lipid bilayer is due to the nature of the terminal functional groups. Arginine exhibits a more drastic impact on the membrane than lysine. SFG responses of the acyl chains, phosphate groups, and carbonyl groups provide evidence that the interaction between AAs and the membrane most likely follows an electrostatics and hydrogen bond-induced defect model. This work presents an exemplary method for comprehensive investigations of interactions between membranes and other functionally significant substances.

Sum frequency generation vibrational spectroscopy (SFG-VS) has been demonstrated to be a powerful technique to study the interfacial structures and interactions of biomolecules at the molecular level. Yet most previous studies mainly collected the SFG spectra in the frequency range of 1500–4000 cm−1, which is not always sufficient to describe the detailed interactions at surface and interface. Thorough knowledge of the complex biophysicochemical interactions between biomolecules and surface requires new ideas and advanced experimental methods for collecting SFG vibrational spectra. We introduced some advanced methods recently exploited by our group and others, including (1) detection of vibration modes in the fingerprint region; (2) combination of chiral and achiral polarization measurements; (3) SFG coupled with surface plasmon polaritons (SPPs); (4) imaging and microscopy approaches; and (5) ultrafast time-resolved SFG measurements. The technique that we integrated with these advanced methods may help to give a detailed and high-spatial-resolution 3D picture of interfacial biomolecules.

Accurate determination of protein structures at the interface is essential to understand the nature of interfacial protein interactions, but it can only be done with a few, very limited experimental methods. Here, we demonstrate for the first time that sum frequency generation vibrational spectroscopy can unambiguously differentiate the interfacial protein secondary structures by combining surface-sensitive amide I and amide III spectral signals. This combination offers a powerful tool to directly distinguish random-coil (disordered) and α-helical structures in proteins. From a systematic study on the interactions between several antimicrobial peptides (including LKα14, mastoparan X, cecropin P1, melittin, and pardaxin) and lipid bilayers, it is found that the spectral profiles of the random-coil and α-helical structures are well separated in the amide III spectra, appearing below and above 1260 cm(-1), respectively. For the peptides with a straight backbone chain, the strength ratio for the peaks of the random-coil and α-helical structures shows a distinct linear relationship with the fraction of the disordered structure deduced from independent NMR experiments reported in the literature. It is revealed that increasing the fraction of negatively charged lipids can induce a conformational change of pardaxin from random-coil to α-helical structures. This experimental protocol can be employed for determining the interfacial protein secondary structures and dynamics in situ and in real time without extraneous labels.

Cholesterol organization and transport within a cell membrane are essential for human health and many cellular functions yet remain elusive so far. Using cholesterol analogue 6-ketocholestanol (6-KC) as a model, we have successfully exploited sum frequency generation vibrational spectroscopy (SFG-VS) to track the organization and transport of cholesterol in a membrane by combining achiral-sensitive ssp (ppp) and chiral-sensitive psp polarization measurements. It is found that 6-KC molecules are aligned at the outer leaflet of the DMPC lipid bilayer with a tilt angle of about 10°. 6-KC organizes itself by forming an α-β structure at low 6-KC concentration and most likely a β-β structure at high 6-KC concentration. Among all proposed models, our results favor the so-called umbrella model with formation of a 6-KC cluster. Moreover, we have found that the long anticipated flip-flop motion of 6-KC in the membrane takes time to occur, at least much longer than previously thought. All of these interesting findings indicate that it is critical to explore in situ, real-time, and label-free methodologies to obtain a precise molecular description of cholesterol's behavior in membranes. This study represents the first application of SFG to reveal the cholesterol-lipid interaction mechanism at the molecular level.

Insertion of short peptides into the cell membrane is energetically unfavorable and challenges the commonly accepted hydrophobic matching principle. Yet there has been evidence that many short peptides can penetrate into the cells to perform the biological functions in salt solution. On the basis of the previous study (J. Phys. Chem. C 2013, 117, 11095−11103), here we further performed a systematic study on the interaction of mastoparan with various neutral lipid bilayers with different lipid chain lengths in situ to examine the hydrophobic matching principle in different aqueous salt environments using sum frequency generation vibrational spectroscopy. It is found that the hydrophobic matching is the dominant driving force for the association of MP with a lipid bilayer in a pure water environment. However, in a kosmotropic ion environment, the hydration of ions can overcome the hydrophobic mismatching effects, leading to the insertion of MP into lipid bilayers with much longer hydrophobic lengths. When t...

Phosphate ion is one of the most important anions present in the intracellular and extracellular fluid. It can form strongly hydrogen-bonded and salt-bridged complexes with arginine and lysine to activate the voltage gated channel protein. A molecular-level insight into how the phosphate anions mediate the interaction between peptides and cell membrane is critical to understand membrane-bound peptide actions. In this study, sum frequency generation vibrational spectroscopy (SFG-VS) has been applied to characterize interactions between mastoparan (MP, a G-protein-activating peptide) and different charged lipid bilayers in situ. It is found that phosphate ions can greatly promote the association of MP with lipid bilayers and accelerate the conformation transition of membrane-bound MP from aggregation into α-helical structure. In phosphate buffer solution, MP can insert not only into negatively and neutrally charged lipid bilayers but also into positively charged lipid bilayers. In neutrally and negatively c...

Cell membranes play a crucial role in many biological functions of cells. A small change in the composition of cell membranes can strongly influence the functions of membrane‐associated proteins, such as ion and water channels, and thus mediate the chemical and physical balance in cells. Such composition change could originate from the introduction of short‐chain alcohols, or other anesthetics into membranes. In this work, we have applied sum frequency generation vibrational spectroscopy (SFG‐VS), supplemented by attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR), to investigate interaction between methanol and 1,2‐dimyristoyl‐d54‐sn‐glycero‐3‐phosphocholine (d54‐DMPC) lipid bilayers. Lipid's hydrocarbon interior is deuterated while its head group is hydrogenated. At the same time, CH3 symmetric stretch from methanol and lipid head amine group has different frequency, thus we can distinguish the behaviors of methanol, lipid head amine group, and lipid hydrocarbon interior. Bas...

The pH response of strong polyelectrolyte brushes originates from the pH-mediated reorganization of hydrogen bond network., Weak polyelectrolytes have found extensive practical applications owing to their rich pH-responsive properties. In contrast, strong polyelectrolytes have long been regarded as pH-insensitive based on the well-established fact that the average degree of charging of strong polyelectrolyte chains is independent of pH. The possible applications of strong polyelectrolytes in smart materials have, thus, been severely limited. However, we demonstrate that almost all important properties of strong polyelectrolyte brushes (SPBs), such as chain conformation, hydration, stiffness, surface wettability, lubricity, adhesion, and protein adsorption are sensitive to pH. The pH response originates from the reorganization of the interchain hydrogen bond network between the grafted chains, triggered by the pH-mediated adsorption-desorption equilibrium of hydronium or hydroxide with the brushes. The reorganization process is firmly identified by advanced sum-frequency generation vibrational spectroscopy. Our findings not only provide a new understanding of the fundamental properties of SPBs but also uncover an extensive family of building blocks for constructing pH-responsive materials.