Search

Although great progress has been made in artificial enzyme engineering, their catalytic performance is far from satisfactory as alternatives of natural enzymes. Here, we report a novel and efficient strategy to access high-performance nanozymes via direct atomization of platinum nanoparticles (Pt NPs) into single atoms by reversing the thermal sintering process. Atomization of Pt NPs into single atoms makes metal catalytic sites fully exposed and results in engineerable structural and electronic properties, thereby leading to dramatically enhanced enzymatic performance. As expected, the as-prepared thermally stable Pt single-atom nanozyme (PtTS-SAzyme) exhibited remarkable peroxidase-like catalytic activity and kinetics, far exceeding the Pt nanoparticle nanozyme. The following density functional theory calculations revealed that the engineered P and S atoms not only promote the atomization process from Pt NPs into PtTS-SAzyme but also endow single-atom Pt catalytic sites with a unique electronic structure owing to the electron donation of P atoms, as well as the electron acceptance of N and S atoms, which simultaneously contribute to the substantial enhancement of the enzyme-like catalytic performance of PtTS-SAzyme. This work demonstrates that thermal atomization of the metal nanoparticle-based nanozymes into single-atom nanozymes is an effective strategy for engineering high-performance nanozymes, which opens up a new way to rationally design and optimize artificial enzymes to mimic natural enzymes.

Proton-exchange membrane fuel cells (PEMFCs) are a promising new energy-conversion technology due to their safe and environmentally friendly characteristics in a wide range of operating conditions. However, catalysis of the acidic oxygen reduction reaction (ORR) at the cathode is the main obstacle. In this regard, platinum-free single-atomic-site catalysts (SACs) with designable active sites are a potential solution. Unlike catalysts for the ORR in alkaline media that have been widely explored, there is still a gap between the performance of SACs and Pt-based catalysts in acidic media. In this review, we introduce the latest progress of SACs in acidic ORR. SACs consist of metal centers and substrates. We conclude controllable synthetic strategies for SACs from single-atomic sites and substrate design, discuss the relationship between the structure of single-atom sites and acidic ORR performance of SACs at the atomic level, and propose challenges and perspectives of SACs in acidic ORR.

Developing artificial enzymes with the excellent catalytic performance of natural enzymes has been a long-standing goal for chemists. Single-atom catalysts with well-defined atomic structure and electronic coordination environments can effectively mimic natural enzymes. Here, we report an engineered FeN3P-centred single-atom nanozyme (FeN3P-SAzyme) that exhibits comparable peroxidase-like catalytic activity and kinetics to natural enzymes, by controlling the electronic structure of the single-atom iron active centre through the precise coordination of phosphorus and nitrogen. In particular, the engineered FeN3P-SAzyme, with well-defined geometric and electronic structures, displays catalytic performance that is consistent with Michaelis–Menten kinetics. We rationalize the origin of the high enzyme-like activity using density functional theory calculations. Finally, we demonstrate that the developed FeN3P-SAzyme with superior peroxidase-like activity can be used as an effective therapeutic strategy for inhibiting tumour cell growth in vitro and in vivo. Therefore, SAzymes show promising potential for developing artificial enzymes that have the catalytic kinetics of natural enzymes. Nanozymes can provide cost and stability advantages over natural enzymes, but they usually display low catalytic activity and inferior kinetics. Now, a highly active nanozyme is developed that shows comparable kinetics to horseradish peroxidase in the oxidation of a commonly used artificial substrate.

Regulating the selectivity of catalysts in selective hydrogenation reactions at the atomic level is highly desirable but remains a grand challenge. Here we report a simple and practical strategy to synthesize a monolithic single-atom catalyst (SAC) with isolated Pd atoms supported on bulk nitrogen-doped carbon foams (Pd-SAs/CNF). Moreover, we demonstrate that the single-atom Pd sites with unique electronic structure endow Pd-SAs/CNF with an isolated site effect, leading to excellent activity and selectivity in 4-nitrophenylacetylene semi-hydrogenation reaction. In addition, benefiting from the great integrity and excellent mechanical strength, monolithic Pd-SAs/CNF catalyst is easy to separate from the reaction system for conducting the subsequent recycling. The cyclic test demonstrates the excellent reusability and stability of monolithic Pd-SAs/CNF catalyst. The discovery of isolated site effect provides a new approach to design highly selective catalysts. And the development of monolithic SACs provides new opportunities to advance the practical applications of single-atom catalysts.

The electrochemical CO2 reduction reaction (CO2RR) is viewed as a promising way to remove the greenhouse gas CO2 from the atmosphere and convert it into useful industrial products such as methane, methanol, formate, ethanol, and so forth. Single-atom site catalysts (SACs) featuring maximum theoretical atom utilization and a unique electronic structure and coordination environment have emerged as promising candidates for use in the CO2RR. The electronic properties and atomic structures of the central metal sites in SACs will be changed significantly once the types or coordination environments of the central metal sites are altered, which appears to provide new routes for engineering SACs for CO2 electrocatalysis. Therefore, it is of great importance to discuss the structural regulation of SACs at the atomic level and their influence on CO2RR activity and selectivity. Despite substantial efforts being made to fabricate various SACs, the principles of regulating the intrinsic electrocatalytic performances of the single-atom sites still needs to be sufficiently emphasized. In this perspective article, we present the latest progress relating to the synthesis and catalytic performance of SACs for the electrochemical CO2RR. We summarize the atomic-level regulation of SACs for the electrochemical CO2RR from five aspects: the regulation of the central metal atoms, the coordination environments, the interface of single metal complex sites, multi-atom active sites, and other ingenious strategies to improve the performance of SACs. We highlight synthesis strategies and structural design approaches for SACs with unique geometric structures and discuss how the structure affects the catalytic properties., Electrochemical CO2 reduction reaction (CO2RR) is a promising way to remove CO2 and convert it into useful industrial products. Single-atom site catalysts provide opportunities to regulate the active sites of CO2RR catalysts at the atomic level.

Supported atomic clusters with uniform metal sites and definite low-nuclearity are intermediate states between single-atom catalysts (SACs) and nanoparticles in size. Benefiting from the presence of metal–metal bonds, supported atomic clusters can trigger synergistic effects among every metal atom, which contributes to achieving unique catalytic properties different from SACs and nanoparticles. However, the scalable and precise synthesis and atomic-level insights into the structure–properties relationship of supported atomic clusters is a great challenge. This perspective presents the latest progress of the synthesis of supported atomic clusters, highlights how the structure affects catalytic properties, and discusses the limitations as well as prospects., Supported atomic clusters with precise nuclearity are intermediate states between single-atom catalysts and nanoparticles in size. Here the authors summarize and discuss synthetic strategies of supported atomic clusters with unique catalytic properties for heterogeneous reactions.

Single-atom catalysts not only maximize metal atom efficiency, they also display properties that are considerably different to their more conventional nanoparticle equivalents, making them a promising family of materials to investigate. Herein we developed a general host–guest strategy to fabricate various metal single-atom catalysts on nitrogen-doped carbon (M1/CN, M = Pt, Ir, Pd, Ru, Mo, Ga, Cu, Ni, Mn). The iridium variant Ir1/CN electrocatalyses the formic acid oxidation reaction with a mass activity of 12.9 $${{{\rm{A}}\,{\rm{mg}}^{-1}_{{\rm{Ir}}}}}$$ whereas an Ir/C nanoparticle catalyst is almost inert (~4.8 × 10−3 $${{{\rm{A}}\,{\rm{mg}}^{-1}_{{\rm{Ir}}}}}$$). The activity of Ir1/CN is also 16 and 19 times greater than those of Pd/C and Pt/C, respectively. Furthermore, Ir1/CN displays high tolerance to CO poisoning. First-principle density functional theory reveals that the properties of Ir1/CN stem from the spatial isolation of iridium sites and from the modified electronic structure of iridium with respect to a conventional nanoparticle catalyst. Single-atom catalysts maximize metal atom efficiency and exhibit properties that can be considerably different to their nanoparticle equivalent. Now a general host–guest strategy to make various single-atom catalysts on nitrogen-doped carbon has been developed; the iridium variant electrocatalyses the formic acid oxidation reaction with high mass activity and displays high tolerance to CO poisoning.

Atomic regulation of metal catalysts has emerged as an intriguing yet challenging strategy to boost product selectivity. Here, we report a density functional theory-guided atomic design strategy for the fabrication of a NiGa intermetallic catalyst with completely isolated Ni sites to optimize acetylene semi-hydrogenation processes. Such Ni sites show not only preferential acetylene π-adsorption, but also enhanced ethylene desorption. The characteristics of the Ni sites are confirmed by multiple characterization techniques, including aberration-corrected high-resolution scanning transmission electron microscopy and X-ray absorption spectrometry measurements. The superior performance is also confirmed experimentally against a Ni5 Ga3 intermetallic catalyst with partially isolated Ni sites and against a Ni catalyst with multi-atomic ensemble Ni sites. Accordingly, the NiGa intermetallic catalyst with the completely isolated Ni sites shows significantly enhanced selectivity to ethylene and suppressed coke formation.

The solar-driven photocatalytic reduction of CO2 (CO2 RR) into chemical fuels is a promising route to enrich energy supplies and mitigate CO2 emissions. However, low catalytic efficiency and poor selectivity, especially in a pure-water system, hinder the development of photocatalytic CO2 RR owing to the lack of effective catalysts. Herein, we report a novel atom-confinement and coordination (ACC) strategy to achieve the synthesis of rare-earth single erbium (Er) atoms supported on carbon nitride nanotubes (Er1 /CN-NT) with a tunable dispersion density of single atoms. Er1 /CN-NT is a highly efficient and robust photocatalyst that exhibits outstanding CO2 RR performance in a pure-water system. Experimental results and density functional theory calculations reveal the crucial role of single Er atoms in promoting photocatalytic CO2 RR.

Manipulating metal atoms in a controllable way for the synthesis of materials with the desired structure and properties is the holy grail of chemical synthesis. The recent emergence of single atomic site catalysts (SASC) demonstrates that we are moving toward this goal. Owing to the maximum efficiency of atom-utilization and unique structures and properties, SASC have attracted extensive research attention and interest. The prerequisite for the scientific research and practical applications of SASC is to fabricate highly reactive and stable metal single atoms on appropriate supports. In this review, various synthetic strategies for the synthesis of SASC are summarized with concrete examples highlighting the key issues of the synthesis methods to stabilize single metal atoms on supports and to suppress their migration and agglomeration. Next, we discuss how synthesis conditions affect the structure and catalytic properties of SASC before ending this review by highlighting the prospects and challenges for the synthesis as well as further scientific researches and practical applications of SASC.

It is highly desirable but challenging to optimize the structure of photocatalysts at the atomic scale to facilitate the separation of electron-hole pairs for enhanced performance. Now, a highly efficient photocatalyst is formed by assembling single Pt atoms on a defective TiO2 support (Pt1 /def-TiO2 ). Apart from being proton reduction sites, single Pt atoms promote the neighboring TiO2 units to generate surface oxygen vacancies and form a Pt-O-Ti3+ atomic interface. Experimental results and density functional theory calculations demonstrate that the Pt-O-Ti3+ atomic interface effectively facilitates photogenerated electrons to transfer from Ti3+ defective sites to single Pt atoms, thereby enhancing the separation of electron-hole pairs. This unique structure makes Pt1 /def-TiO2 exhibit a record-level photocatalytic hydrogen production performance with an unexpectedly high turnover frequency of 51423 h-1 , exceeding the Pt nanoparticle supported TiO2 catalyst by a factor of 591.

The electrocatalytic reduction reaction of CO2 (CO2RR) is a promising strategy to promote the global carbon balance and combat global climate change. Herein, exclusive Bi-N4 sites on porous carbon ...

Here, we successfully developed nanostructured PtNi particles supported on nitrogen-doped carbon (NC), which were obtained by carbonization of metal-organic frameworks under different temperatures, forming the nano-PtNi/NC-600, nano-PtNi/NC-800, nano-PtNi/NC-900 and nano-PtNi/NC-1000 catalysts. For hydrosilylation of 1-octene, we found that the nano-PtNi/NC-1000 catalyst exhibits higher activity for anti-Markovnikov hydrosilylation of 1-octene than those of nano-PtNi/NC-600, nano-PtNi/NC-800, nano-PtNi/NC-900 catalysts. Experiments have verified that benefiting from obvious charge transfer from nano-PtNi particles to NC support carbonized at 1,000 °C, the nano-PtNi/NC-1000 catalyst achieved almost complete conversion and produce exclusive adduct for anti-Markovnikov hydrosilylation of 1-octene. Importantly, the nano-PtNi/NC-1000 catalyst exhibited good reusability for the hydrosilylation reaction. This work provides a new path to optimize electronic structure of catalysts by support modification to enhance electron transfer between metal active species and supports for highly catalytic performance.

Sohlh2 belongs to the superfamily of basic helix-loop-helix (bhlh) transcription factors. Aberrant expression of bhlh transcription factors has been shown to be associated with multiple tumorigenesis. We previously identified that sohlh2 functioned as a tumor suppressor in ovarian cancer. Here, we examined the expression levels of sohlh2 in human breast cancer and its potential role in disease pathogenesis. The results of sohlh2 immunohistochemistry (IHC) and Western blot analysis demonstrated the decreased sohlh2 expression in breast cancer specimens as compared to adjacent noncancerous tissues. Through in vitro MTT, BrdU, colony formation and cell cycle assays and in vivo tumor xenograft studies, we showed that forced expression of sohlh2 led to a significant reduction in proliferation due to G1 arrest in vitro and tumorigenesis in nude mice. Conversely, silencing of sohlh2 enhanced breast cancer cell proliferation. Furthermore, we confirmed that sohlh2 inhibited breast cancer cell proliferation by suppressing the Wnt/β-catenin signaling pathway. APC was the direct target of sohlh2, and mediated the inhibitory activities of sohlh2 on Wnt/β-catenin signaling pathway. Thus, our data indicate that sohlh2 likely functions as a tumor suppressor in breast cancer that is mediated by repressing Wnt/β-catenin signaling pathway via upregulation of APC expression.

Incorporating atomically dispersed metal species into functionalized metal-organic frameworks (MOFs) can integrate their respective merits for catalysis. A cage-controlled encapsulation and reduction strategy is used to fabricate single Ru atoms and triatomic Ru3 clusters anchored on ZIF-8 (Ru1 @ZIF-8, Ru3 @ZIF-8). The highly efficient and selective catalysis for semi-hydrogenation of alkyne is observed. The excellent activity derives from high atom-efficiency of atomically dispersed Ru active sites and hydrogen enrichment by the ZIF-8 shell. Meanwhile, ZIF-8 shell serves as a novel molecular sieve for olefins to achieve absolute regioselectivity of catalyzing terminal alkynes but not internal alkynes. Moreover, the size-dependent performance between Ru3 @ZIF-8 and Ru1 @ZIF-8 is detected in experiment and understood by quantum-chemical calculations, demonstrating a new and promising approach to optimize catalysts by controlling the number of atoms.

Atomic-level insight into the unique catalytic capability of single-atom catalysts that distinguished from nanometer-sized counterparts is highly desirable for catalyst design and catalysis research. By synthesizing single Pd atoms supported on TiO2 as a catalyst, here we demonstrate a steric hindrance effect of single atoms induced by the unique isolation of single-atom active sites to achieve a remarkable enhancement on catalytic performance in the synthesis of dimethyl carbonate. Experimental results and density functional theory calculations reveal that such steric hindrance effect of single atoms favors the yield of the desired product dimethyl carbonate against further reacting with intermediates to form byproduct, because no extra Pd species around single Pd atoms provide active sites to further adsorb and activate substrates directly. The discovery of such steric hindrance effect is a valuable supplement to single-atom catalysis, and may promote single-atom catalysts to be widely applied in selective catalytic reactions.

Demonstrated here is the correlation between atomic configuration induced electronic density of single-atom Co active sites and oxygen reduction reaction (ORR) performance by combining density-functional theory (DFT) calculations and electrochemical analysis. Guided by DFT calculations, a MOF-derived Co single-atom catalyst with the optimal Co1 -N3 PS active moiety incorporated in a hollow carbon polyhedron (Co1 -N3 PS/HC) was designed and synthesized. Co1 -N3 PS/HC exhibits outstanding alkaline ORR activity with a half-wave potential of 0.920 V and superior ORR kinetics with record-level kinetic current density and an ultralow Tafel slope of 31 mV dec-1 , exceeding that of Pt/C and almost all non-precious ORR electrocatalysts. In acidic media the ORR kinetics of Co1 -N3 PS/HC still surpasses that of Pt/C. This work offers atomic-level insight into the relationship between electronic density of the active site and catalytic properties, promoting rational design of efficient catalysts.

Here, we have developed a cobalt single-atom-site catalyst (Co1/P-NC). Benefiting from the unique properties of single atoms and ingenious support modification by atomic-level heteroatom nitrogen and phosphorus doping, the Co1/P-NC catalyst exhibited high activity and excellent selectivity for selective oxidation of primary alcohols.

The solar-driven photocatalytic reduction of CO

The performance and the cost of electrocatalysts play the two most vital roles in the development and application of energy conversion technologies. Single-atom catalysts (SACs) are recently emerging as a new frontier in catalysis science. With maximum atom-utilization efficiency and unique properties, SACs exhibit great potential for enabling reasonable use of metal resources and achieving atomic economy. However, fabricating SACs and maintaining the metal centers as atomically dispersed sites under synthesis and catalysis conditions are challenging. Here, we highlight and summarize recent advances in wet-chemistry synthetic methods for SACs with special emphasis on how to achieve the stabilization of single metal atoms against migration and agglomeration. Moreover, we summarize and discuss the electrochemical applications of SACs with a focus on the oxygen reduction reaction (ORR), hydrogen evolution reaction (HER), and CO2 reduction reaction (CO2RR). At last, the current issues and the prospects for the development of this field are discussed.

铂基催化剂已广泛应用于烯烃的硅氢加成反应, 但贵金属铂因其稀有而价高, 成为其工业化应用的障碍. 为了降低成本和提高原子效率, 我们采用了廉价的镍金属来代替金属铂. 本文合成了一系列具有可调成分和形貌的双金属铂镍催化剂, 发现其在温和条件下对烯烃的硅氢加成反应表现出优越的活性和选择性. 此外, 还发现八面体的铂镍纳米合金不仅能应用于具有不同的官能团烯烃, 而且还有利于有机硅和硅烷偶联剂的绿色化学制备, 开发出更多的新产品.

The transition from multipotent neural stem cells (NSCs) to terminally differentiated neurons is a multistep process, and the transition is finely regulated by transcription factors with basic helix-loop-helix (bHLH) motifs. Melatonin is an endogenous neurohormone with profound neurotrophic and neuroprotective effects both during the embryonic developmental stage and adulthood. The effects of melatonin on the differentiation of NSCs have been reported, and these effects may be responsible for its neuroprotective properties. However, the mechanisms underlying the effects of melatonin are not well understood. It is unclear whether melatonin affects the expression of bHLH factors at the onset of neuronal differentiation, and the molecular mechanisms involved still need to be further explored. Using mouse NSCs, we identified a novel role for melatonin in the epigenetic regulation of bHLH factors during neuronal differentiation. Our data showed that melatonin promoted neuronal differentiation by specifically increasing the acetylation of histone H3 lysine14 (H3K14). Increased H3K14 acetylation altered the chromatin state of the promoters of bHLH factors Neurogenin1 and NeuroD1 and activated their transcription; then, Neurogenin1 and NeuroD1 initiated and sustained the commitment to neuronal fates. As we know, CBP/p300 is an important class of histone acetyltransferases that acetylate histone H3K14, we found that melatonin activated the histone acetyltransferase activity of CREB-binding protein (CBP)/p300 via ERK signaling pathways. For the first time, we systematically showed the molecular mechanism of action of melatonin, which suggested that melatonin functions as a regulator of the acetylation-dependent gene expression network.

Bio-oil, produced by the destructive distillation of cheap and renewable lignocellulosic biomass, contains high energy density oligomers in the water-insoluble fraction that can be utilized for diesel and valuable fine chemicals productions. Here, we show an efficient hydrodeoxygenation catalyst that combines highly dispersed palladium and ultrafine molybdenum phosphate nanoparticles on silica. Using phenol as a model substrate this catalyst is 100% effective and 97.5% selective for hydrodeoxygenation to cyclohexane under mild conditions in a batch reaction; this catalyst also demonstrates regeneration ability in long-term continuous flow tests. Detailed investigations into the nature of the catalyst show that it combines hydrogenation activity of Pd and high density of both Brønsted and Lewis acid sites; we believe these are key features for efficient catalytic hydrodeoxygenation behavior. Using a wood and bark-derived feedstock, this catalyst performs hydrodeoxygenation of lignin, cellulose, and hemicellulose-derived oligomers into liquid alkanes with high efficiency and yield., Bio-oil is a potential major source of renewable fuels and chemicals. Here, the authors report a palladium-molybdenum mixed catalyst for the selective hydrodeoxygenation of water-insoluble bio-oil to mixtures of alkanes with high carbon yield.

Here we report a novel approach to synthesize atomically dispersed uniform clusters via a cage-separated precursor preselection and pyrolysis strategy. To illustrate this strategy, well-defined Ru3(CO)12 was separated as a precursor by suitable molecular-scale cages of zeolitic imidazolate frameworks (ZIFs). After thermal treatment under confinement in the cages, uniform Ru3 clusters stabilized by nitrogen species (Ru3/CN) were obtained. Importantly, we found that Ru3/CN exhibits excellent catalytic activity (100% conversion), high chemoselectivity (100% for 2-aminobenzaldehyde), and significantly high turnover frequency (TOF) for oxidation of 2-aminobenzyl alcohol. The TOF of Ru3/CN (4320 h–1) is about 23 times higher than that of small-sized (ca. 2.5 nm) Ru particles (TOF = 184 h–1). This striking difference is attributed to a disparity in the interaction between Ru species and adsorbed reactants.

The development of low-cost, efficient, and stable electrocatalysts for the oxygen reduction reaction (ORR) is desirable but remains a great challenge. Herein, we made a highly reactive and stable isolated single-atom Fe/N-doped porous carbon (ISA Fe/CN) catalyst with Fe loading up to 2.16 wt %. The catalyst showed excellent ORR performance with a half-wave potential (E1/2) of 0.900 V, which outperformed commercial Pt/C and most non-precious-metal catalysts reported to date. Besides exceptionally high kinetic current density (Jk) of 37.83 mV cm−2 at 0.85 V, it also had a good methanol tolerance and outstanding stability. Experiments demonstrated that maintaining the Fe as isolated atoms and incorporating nitrogen was essential to deliver the high performance. First principle calculations further attributed the high reactivity to the high efficiency of the single Fe atoms in transporting electrons to the adsorbed OH species.

The search for active, stable, and cost-efficient electrocatalysts for hydrogen production via water splitting could make a substantial impact on energy technologies that do not rely on fossil fuels. Here we report the synthesis of rhodium phosphide electrocatalyst with low metal loading in the form of nanocubes (NCs) dispersed in high-surface-area carbon (Rh2P/C) by a facile solvo-thermal approach. The Rh2P/C NCs exhibit remarkable performance for hydrogen evolution reaction and oxygen evolution reaction compared to Rh/C and Pt/C catalysts. The atomic structure of the Rh2P NCs was directly observed by annular dark-field scanning transmission electron microscopy, which revealed a phosphorus-rich outermost atomic layer. Combined experimental and computational studies suggest that surface phosphorus plays a crucial role in determining the robust catalyst properties.

Objective Neural tube defects (NTDs) are the most serious and common birth defects in the clinic. The SRY-related HMG box B1 (SoxB1) gene family has been implicated in different processes of early embryogenesis. Sox19b is a maternally expressed gene in the SoxB1 family that is found in the region of the presumptive central nervous system (CNS), but its role and mechanism in embryonic neural stem cells (NSCs) during neural tube development have not yet been explored. Considering that Sox19b is specific to bony fish, we intended to investigate the role and mechanism of Sox19b in neural tube development in zebrafish embryos. Material and methods Morpholino (MO) antisense oligonucleotides were used to construct a Sox19b loss-of-function zebrafish model. The phenotype and the expression of related genes were analysed by in situ hybridization and immunolabelling. Epigenetic modifications were detected by western blot and chromatin immunoprecipitation. Results In this study, we found that zebrafish embryos exhibited a reduced or even deleted forebrain phenotype after the expression of the Sox19b gene was inhibited. Moreover, we found for the first time that knockdown of Sox19b reduced the proliferation of NSCs; increased the transcription levels of Ngn1, Ascl1, HuC, Islet1, and cyclin-dependent kinase (CDK) inhibitors; and led to premature differentiation of NSCs. Finally, we found that knockdown of Sox19b decreased the levels of EZH2/H3K27me3 and decreased the level of H3K27me3 at the promoters of Ngn1 and ascl1a. Conclusion Together, our data demonstrate that Sox19b plays an essential role in early NSC proliferation and differentiation through EZH2-mediated histone methylation in neural tube development. This study established the role of transcription factor Sox19b and epigenetic factor EZH2 regulatory network on NSC development, which provides new clues and theoretical guidance for the clinical treatment of neural tube defects.

The electrocatalytic reduction reaction of CO

Offspring of mothers with hyperglycemia during pregnancy have a higher incidence of long-term neuropsychiatric disorders than offspring from a normal pregnancy, indicating that neocortical neurogenesis might be affected by maternal hyperglycemia. A paucity of study evaluating the effects of hyperglycemia on neocortical neurogenetic differentiation of neural stem cells, and the mechanism remains unclear. We sought to investigate the the roles and possible molecular mechanism of maternal hyperglycemia on neocortical neurogenetic differentiation of neural stem cells. We established a mouse model of a hyperglycemic pregnancy to study effects of intrauterine exposure to maternal hyperglycemia on neocortical neurogenesis. We observed morphological changes in the neocortex and detected the neurogenetic differentiation of neural stem cells in offspring affected by high glucose levels. We investigated the regulatory network between epigenetic modification and transcription factors in differentiated neural stem cells under hyperglycemic conditions. Maternal hyperglycemia disturbs neocortical lamination in some non-malformed offspring. Our results suggested that hyperglycemia altered the early-born neuron fate and the distribution of newborn neurons in deep layers by promoting the earlier differentiation of neural stem cells. Altered histone acetylation and its regulation on the transcription of proneural genes might be correlated to the disrupted differentiation of neural stem cells and altered distribution of newborn projection neurons in the neocortex. Our data raised the possibility that maternal hyperglycemia in pregnancy disturbs the laminar distribution of neocortical projection neurons in some non-malformed offspring via epigenetic regulation on neural stem cell differentiation and the birthdate of neocortical neurons.

Cellular metabolism plays a crucial role in controlling the proliferation, differentiation, and quiescence of neural stem cells (NSCs). The metabolic transition from aerobic glycolysis to oxidative phosphorylation has been regarded as a hallmark of neuronal differentiation. Understanding what triggers metabolism reprogramming and how glucose metabolism directs NSC differentiation may provide new insight into the regenerative potential of the brain. TP53 inducible glycolysis and apoptosis regulator (TIGAR) is an endogenous inhibitor of glycolysis and is highly expressed in mature neurons. However, its function in embryonic NSCs has not yet been explored. In this study, we aimed to investigate the precise roles of TIGAR in NSCs and the possible involvement of metabolic reprogramming in the TIGAR regulatory network. We observed that TIGAR is significantly increased during brain development as neural differentiation proceeds, especially at the peak of NSC differentiation (E14.5–E16.5). In cultured NSCs, knockdown of TIGAR reduced the expression of microtubule-associated protein 2 (MAP2), neuron-specific class III beta-tubulin (Tuj1), glial fibrillary acidic protein (GFAP), Ngn1, and NeuroD1, and enhanced the expression of REST, suggesting that TIGAR is an important regulator of NSC differentiation. Furthermore, TIGAR enhanced the expression of lactate dehydrogenase B (LDHB) and the mitochondrial biogenesis and oxidative phosphorylation (OXPHOS) markers, peroxisome proliferator-activated receptor gamma coactivator 1 (PGC-1α), nuclear respiratory factor (NRF1), and MitoNEET during NSC differentiation. TIGAR can decrease lactate production and accelerate oxygen consumption and ATP generation to maintain a high rate of OXPHOS in differentiated NSCs. Interestingly, knockdown of TIGAR decreased the level of acetyl-CoA and H3K9 acetylation at the promoters of Ngn1, Neurod1, and Gfap. Acetate, a precursor of acetyl-CoA, increased the level of H3K9 acetylation and rescued the effect of TIGAR deficiency on NSC differentiation. Together, our data demonstrated that TIGAR promotes metabolic reprogramming and regulates NSC differentiation through an epigenetic mechanism.

Ultrathin two-dimensional (2D) nanomaterials offer unique advantages compared to their counterparts in other dimensionalities. O-vacancies in such materials allow rapid electron diffusion. Carbon doping often improves the electric conductivity. Considering these merits, the WO3−x /C ultrathin 2D nanomaterial is expected to exhibit excellent electrochemical performance in Li-ion batteries. Here, ultrathin WO3−x /C nanosheets were prepared via an acid-assisted one-pot process. The as-prepared WO3−x /C ultrathin nanosheets showed good electrochemical performance, with an initial discharge capacity of 1,866 mA·h·g−1 at a current density of 200 mA·g−1. After 100 cycles, the discharge and charge capacities were 662 and 661 mA·h·g−1, respectively. The reversible capacity of the WO3−x /C ultrathin nanosheets exceeded those of WO3 and WO3−x nanosheets. The electrochemical testing results demonstrated that WO3−x /C ultrathin nanosheets are promising alternative anode materials for Li-ion batteries.

Upon fertilization, maternal factors direct development and trigger zygotic genome activation at the maternal-to-zygotic transition (MZT). However, the factors that activate the zygotic program in vertebrates are not well defined. Here, we found that protein palmitoylation played an important role in acquiring transcriptional competency and orchestrating the clearance of the maternal program in zebrafish. After inhibition of protein palmitoylation, zebrafish embryos developed normally before the Mid-Blastula Transition (MBT); however, they did not initiate epiboly. Moreover, our results showed that protein palmitoylation is required to initiate the zygotic developmental program and induce clearance of the maternal program by activating miR-430 expression.