Search

Improvement of cultivated cotton adaptability to extreme climate events under climate change promotes sustainable cotton production. Extreme rainfall leads to a significant decrease in cotton yield, which may be related to changes in soil water consumption (SWC) and the vertical distribution of yield, but relevant research is still scarce. Here, a two-year cotton sowing date experiment was conducted in which geostatistics, sensor technology, the spatial grid method, and principal component analysis were combined to analyze cotton utilization of soil water during extreme rainfall (2021) and normal (2022) years. The reasons for cotton yield reduction under extreme rainfall and strategies to improve cotton production adaptability to extreme rainfall were discussed. Under extreme rainfall, the morphogenesis and reproductive organ development of cotton were inhibited. The accumulation of SWC and its relationship with the biomass accumulation of cotton on different sowing dates under extreme rainfall exhibited nearly opposite characteristics to those in a normal year. Simultaneously, the two-year yield showed the opposite trend with the change in sowing date. There existed a trade-off strategy for the vertical distribution (i.e., on the upper, middle and lower fruiting branches) of cotton yield. Extreme rainfall reduced the yield at lower fruiting branches and increased the boll-forming rate of the upper fruiting branches, which was closely related to seed cotton yield, lint yield and water productivity (WP). Optimizing the cotton sowing date (early sowing should be appropriate in this study) may improve the adaptability of cotton production under extreme rainfall, but further long-term studies are needed. This study highlights the critical practice of climate-smart agriculture and has reference value for the sustainable development of cotton production.

Deficit irrigation is a common strategy to reduce water use and improve the sustainability of cotton production. However, the effects of water deficits on crop productivity and quality are subject to genotype by management by environmental interactions. This study investigated effects of water deficits and frequency of irrigation on cotton performance grown in semi-arid region, Xinjiang, the main cotton-growing area in China. Two field trials (2020 and 2021) with split experimental design, including main factors of three irrigation levels (moderate-deficit, mild-deficit and full-irrigation) and split factors of three irrigation frequencies (4, 8 and 12 days) were conducted. Results from two trials both showed little negative influence of irrigation levels on yield, and higher irrigation frequency improved yield under same irrigation level. Significant effects of irrigation levels on yield components were found in 2021, with a 22 % increase in boll number and an 18 % reduction in boll weight under moderate-deficit irrigation compared with those under full-irrigation. Interactions between irrigation levels and frequencies significantly affected harvest index (HI), showing that reduced irrigation might be beneficial for improving HI. However, decreased fibre length while increased fibre micronaire were found under deficit irrigation. A strong association between radiation use efficiency (RUE) and boll growth rate was observed, suggesting that RUE might be the driving force of yield formation. A tight correlation between both biomass and transpiration efficiency versus delta temperature between air and canopy (ΔTair-canopy) was observed, suggesting ΔTair-canopy could be used as an efficient tool to assess plant production under deficit irrigation. This study provided an improved understanding of the physiological basis of cotton yield formation and further identified a high-throughput and instantaneous method to monitor effects of deficit irrigation on crop productivity.

Optimizing irrigation strategies is crucial for sustaining cotton production in the face of growing water scarcity. The three-year experimental study (2020–2022) focused on the impact of varying irrigation amounts (320, 370, and 420 mm) and frequencies (4-, 8-, and 12-day intervals) on cotton growth, yield, yield components, and fiber quality in southern Xinjiang. Employing a completely randomized design with three replications, the results indicated higher irrigation amounts resulted in numerically 2.5–7.5% higher lint yields compared to those under medium and low irrigation amounts, notably significant in 2021. Boll density emerged as the primary yield component influencing yield loss due to irrigation amount, followed by seed cotton weight boll−1. Increased boll density was associated with a greater total number of fruiting sites. Additionally, the increased seed cotton weight boll−1 could be linked to an increased seed number boll−1 and a decreased boll fraction at the lower fruiting branches with lower seed cotton weight boll−1. Higher irrigation frequency improved lint yield by increasing boll density, though a significant effect was observed only in 2020. Increased irrigation amounts generally led to longer fiber lengths but lower micronaire values, while increased irrigation frequency resulted in longer, stronger fibers and reduced micronaire values. Furthermore, the highest yield stability was observed under the condition of high irrigation amount and high frequency. This study holds certain guiding significance for water resource management in cotton production in arid regions.

Planting density affects crop microclimate and intra-plant competition, playing an important role on yield formation and resource use, especially in areas where the cotton is grown at relatively high plant densities in Xinjiang, China. However, more studies are needed to examine how the change in planting density affects the microclimate factors such as the fraction of light intercepted (FLI), air temperature(T) and relative humidity (RH) within different canopy layers, which in turn affect the boll number per plant (BNF), boll number per unit area (BNA), boll weight (BW), and boll-setting rate (BSR) at fruiting branch (FB) positions FB1–3, FB4–6, and FB≥7 in cotton. To quantify the relationships between boll characteristics, yield, and microclimate factors, we conducted a 2-year field experiment in 2019–2020 in Xinjiang with six plant densities: 9 (P1), 12 (P2), 15 (P3), 18 (P4), 21 (P5), and 24 (P6) plants m−2. With each three plants m−2 increase in density, the average FLI and RH across different canopy layers increased by 0.37 and 2.04%, respectively, whereas T decreased by 0.64 °C. The BNF at FB≥ 7, FB4–6, and FB1–3 decreased by 0.82, 0.33, and 0.5, respectively. The highest BNA was observed in the upper and middle layers in the P4 treatment and in the lowest canopy layer with the P5. The highest BW was measured in the middle canopy layer for P3, and the highest BSR was measured in the lower layer for P3. Plant density exhibited linear or quadratic relationships with FLI, T, and RH. Microclimate factors mainly affected the boll number in each layer, but had no significant effects on the BW in any layer or the BSR in the middle and lower layers. Cotton yield was non-linearly related to plant density. The 2-year maximum yield was achieved at a plant density of 21 plants m−2, but the yield increase compared to the yield with a density of 18 plants m−2was only 0.28%. Thus, we suggest that the optimal plant density for drip-irrigated cotton in Xinjiang is 18 plants m−2, which could help farmers grow machine-harvested cotton.

Abstract Background Within-canopy interception of photosynthetically active radiation (PAR) impacts yield and other agronomic traits in cotton (Gossypium hirsutum L.). Field experiments were conducted to investigate the influence of 6 cotton varieties (they belong to 3 different plant types) on yield, yield distribution, light interception (LI), LI distribution and the relationship between yield formation and LI in Anyang, Henan, in 2014 and 2015. Result The results showed that cotton cultivars with long branches (loose-type) intercepted more LI than did cultivars with short branches (compact-type), due to increased LI in the middle and upper canopy. Although loose-type varieties had greater LI, they did not yield significantly higher than compact-type varieties, due to decreased harvest index. Therefore, improving the harvest index by adjusting the source-to-sink relationship may further increase cotton yield for loose-type cotton. In addition, there was a positive relationship between reproductive organ biomass accumulation and canopy-accumulated LI, indicating that enhancing LI is important for yield improvement for each cultivar. Furthermore, yield distribution within the canopy was significantly linearly related to vertical LI distribution. Conclusion Therefore, optimizing canopy structure of different plant type and subsequently optimizing LI distribution within the cotton canopy can effectively enhance the yield.

The photosynthetically active radiation (PAR) of crop canopy is highly related to yield formation, but how it relates to yield and yield distribution is not well understood. The focus of this study was to explore the relationship between light competition under different densities and yield distributions of cotton. The experiment was conducted in 2019 and 2020 at the Cotton Research Institute of the Chinese Academy of Agricultural Sciences in Anyang city, Henan Province, China. A randomized block design was employed, with a total of three repeats. Each repeat had six density treatments: D1: 15,000; D2: 33,000; D3: 51,000; D4: 69,000; D5: 87,000; and D6: 105,000 plants·ha−1. As predicted, the results showed that the canopy light interception, leaf area index, plant height, and biomass of high-density cotton were higher than those of low-density cotton. The aboveground biomass produced by D6 was the highest, and was 12.9, 19.5, 25.4, 46.3, and 69.2% higher in 2019 and 14.3, 19.9, 32.5, 53.7, and 109.9% higher in 2020 than D5, D4, D3, D2, and D1, respectively. Leaf area, plant height, biomass, boll number, and boll weight were significantly correlated with the light interception rate. D5 (87,000 plants·ha−1) had a higher light interception rate and the highest yield. The highest lint yields produced by D5 were 1673.5 and 1375.4 kg·ha−1 in two years, and was 3.2, 4.3, 5.6, 9.7, and 24.7% higher in 2019, and 6.8, 10.6, 13.5, 21.5, and 34.4% higher in 2020 than D6, D4, D3, D2, and D1, respectively. The boll retention of the lower fruit branch under D5 reached 0.51 and 0.57 in two years, respectively. The shedding rate of the upper fruit branch decreased with the increase in cotton density in two years. The boll retention rate and shedding rate in the lower part of cotton plants were most closely related to light interception, with R2 values of 0.91 and 0.96, respectively. Our study shows cotton yield could be improved through higher light interception by optimizing planting density and canopy structure.

Different cotton (Gossypium hirsutum L.)-wheat (Triticum aestivum) planting patterns are widely applied in the Yellow River Valley of China, and crop yield mainly depends on light interception. However, little information is available on how cotton canopy light capturing and yield distribution are affected by planting patterns. Hence, field experiments were conducted in 2016 and 2017 to study the response of cotton canopy light interception, square and boll distribution, the leaf area index (LAI) and biomass accumulation to three planting patterns: a cotton monoculture (CM, planted on 15 May) system, a cotton/wheat relay intercropping (CWI, planted on 15 May) system, in which three rows of wheat rows were intercropped with one row of cotton, and a system in which cotton was directly seeded after wheat (CWD, planted on 15 June). The following results were obtained: 1) greater light capture capacity was observed for cotton plants in the CM and CWI compared with the CWD, and the light interception of the CM was 22.4% and 51.4% greater than that of the CWI and CWD, respectively, at 30 days after sowing (DAS) in 2016; 2) more bolls occurred at the first sympodial position (SP) than at other SPs for plants in the CM; 3) based on the LAI and biomass accumulation, the cotton growth rate was the greatest in CWD, followed by CM and CWI; and 4) the CM produced significantly greater yields than did the other two treatments because it yielded more bolls and greater boll weight. Information on the characteristics of cotton growth and development in response to different planting patterns would be helpful for understanding the response of cotton yields to planting patterns and would facilitate the improvement of cotton productivity.

Modification of the cotton canopy results in shade avoidance and competition for light, which shows that density and spatial arrangement of cotton have a great impact on light interception. This experiment was conducted in 2018 and 2019 in the experimental field at the Institute of Cotton Research of Chinese Academy of Agricultural Science in Anyang city, Henan Province, China. Six plant densities of cotton variety SCRC28 were used to assess spatial competition for light in cotton populations during the whole growing period. Light interception data were collected and analyzed according to the spatial grid method and the extension of Simpson’s 3/8 rule. The results showed that at the bottom of the canopy, greater light interception was observed at high densities than at low densities, while in the external part of the layer of the canopy in the horizontal direction, low light interception was recorded at low densities. Leaf area, aboveground biomass and plant height were obviously correlated with light interception, and the cotton population with a higher density (8.7 plants m−2) performed best at the light interception competition, and with the highest yield. The results will provide guidance on light management through the optimization of the structure of the canopy to provide more solar radiation and a significant basis by which to improve the management of light and canopy architecture.

The number of cotton plants grown per unit area has recently gained attention due to technology expense, high input, and seed cost. Yield consistency across a series of plant populations is an attractive cost-saving option. Field experiments were conducted to compare biomass accumulation, fiber quality, leaf area index, yield and yield components of cotton planted at various densities (D1, 1.5; D2, 3.3; D3, 5.1; D4, 6.9; D5, 8.7; and D6, 10.5 plants m−2). High planting density (D5) produced 21% and 28% more lint yield as compared to low planting density (D1) during both years, respectively. The highest seed cotton yield (4662 kg/ha) and lint yield (1763 kg/ha) were produced by high plant density (D5) while the further increase in the plant population (D6) decreased the yield. The increase in yield of D5 was due to more biomass accumulation in reproductive organs as compared to other treatments. The highest average (19.2 VA gm m−2 d−1) and maximum (21.8 VM gm m−2 d−1) rates of biomass were accumulated in reproductive structures. High boll load per leaf area and leaf area index were observed in high planting density as compared to low, while high dry matter partitioning was recorded in the lowest planting density as compared to other treatments. Plants with low density had 5% greater fiber length as compared to the highest plant density, while the fiber strength and micronaire value were 10% and 15% greater than the lowest plant density. Conclusively, plant density of 8.7 plants m−2 is a promising option for enhanced yield, biomass, and uniform fiber quality of cotton.