Search

Low-frequency ultrawideband synthetic aperture radar (UWB SAR) has high-resolution imaging and foliage-penetrating ability, which can detect the foliage-concealed target. However, due to the jungle detection environment and the low-frequency UWB SAR characteristics, there are often some nontarget strong scattering points in low-frequency UWB SAR images, which may increase the difficulty of foliage-concealed target change detection. To improve the change detection rate of the foliage-concealed target, a foliage-concealed target change detection strategy based on image stacks in low-frequency UWB SAR images is proposed. In image preprocessing, a relative radiometric correction method based on the bidirectional linear regression model is presented, which can eliminate the low-frequency UWB SAR image changes caused by nontarget factors. Besides, in change detection processing, multiple difference images are first obtained by subtracting the image to be detected from multiple reference images. Then, the Gaussian probability density function is used to model the distribution of the amplitude of these difference images. Finally, the generalized likelihood ratio test is used for target change detection, which effectively suppresses the interference, such as tree trunk clutter. Experimental results tested on the CARABAS-II SAR dataset demonstrate the correctness and effectiveness of the proposed strategy, which can improve the change detection probability of the foliage-concealed target with the lower false alarm rate.

The low-frequency ultrawideband synthetic aperture radar (UWB SAR) has the ability of the foliage-penetrating and high-resolution imaging, which can detect the foliage-concealed target. However, due to low-frequency UWB SAR characteristics and forest detection environments, there are usually some nontarget strong scattering points in the low-frequency UWB SAR images, which may increase the difficulty of the foliage-concealed target change detection. To solve the problem of the weak antijamming ability of the foliage-concealed target change detection, a foliage-concealed target change detection scheme based on the convolutional neural network in the low-frequency UWB SAR images is proposed, which combines the traditional image difference method and deep-learning method. First, a relatively low inspection threshold is set for the target change detection based on the image difference method, which can obtain a lot of the position information of the detection point. Moreover, for the target characteristics in the foliage-concealed scenarios, the corresponding data extraction and enhancement techniques are used to effectively extract the detection point samples from the detection image and reference image, which can prevent the overfitting of the model training caused by the sample scarcity. Finally, the samples of the detection points are input to the target classification network with the double input and single output for the classification training and testing. The experimental results tested on the CARABAS-II SAR dataset demonstrate the correctness and effectiveness of the proposed scheme, which has the better change detection performance and anti-interference capability.

Circular synthetic aperture radar (CSAR) has advantages of the omnidirectional detection and high-resolution imaging. However, when CSAR detects the dense target in the observation scene, the phenomena such as the layover effect in the CSAR image may make mutual interference between the adjacent vehicles, which leads to the poor performance of dense target detection by traditional methods. To address this problem, this article has proposed a high-precision imaging and dense vehicle target detection method for the airborne single-pass CSAR, which includes the CSAR high-precision imaging based on the extracted digital elevation model (DEM) information and high-precision dense vehicle target detection based on the CSAR image. For the high-precision imaging, the backprojection algorithm (BPA) is first used for the observation scene imaging, and then the DEM information of the vehicle target is extracted using the improved subaperture correlation method. Finally, the extracted DEM information is combined with the BPA for the high-precision imaging. For the high-precision detection, the obtained high-precision CSAR image is used to generate the maximally stable extremal region, then the extreme region is fused using the vehicle target length and width information, and finally the high-precision detection result of the dense vehicle target is obtained. Based on the public CSAR dataset from the American Air Force Research Laboratory, the experimental results show that the proposed method can obtain the high-precision CSAR images and improve the detection rate of dense vehicle target under the premise of ensuring a low false alarm rate.

Multi-baseline circular synthetic aperture radar (MB CSAR) can be applied to obtain a three-dimensional (3D) image of the observation scene. However, the phase error caused by radar platform motion or atmospheric propagation delay restricts its 3D imaging capabilities. The phase error calibration of MB CSAR data is an essential step in the 3D imaging procedure due to the limited accuracy of positioning sensors. Phase gradient autofocus (PGA) is widely utilized to estimate the phase errors but is subject to shifts in the direction perpendicular to the line of sight and long iteration time in some sub-apertures. In this paper, an improved PGA method for MB CSAR 3D imaging is proposed, which can suppress the shifts and reduce computation time. This method is based on phase gradient estimation, but the prominent units are selected with an energy criterion. Then, weighted phase gradient estimation is presented to suppress the influence of prominent units with poor quality. Finally, a contrast criterion is adopted to reach faster convergence. The experimental results based on the measured MB CSAR data (Gotcha dataset) demonstrate the validity and feasibility of the proposed phase error calibration method for MB CSAR 3D imaging.

Geosynchronous spaceborne–airborne (GEO-SA) ultra-high-frequency ultra-wideband bistatic synthetic aperture radar (UHF UWB BiSAR) provides high-precision images for marine and polar environments, which are pivotal in glacier monitoring and sea ice thickness measurement for polar ocean mapping and navigation. Contrasting with traditional high-frequency BiSAR, it faces unique challenges, such as the considerable spatial variability, significant range–azimuth coupling, and vast volumes of echo data, which impede high-resolution image reconstruction. This paper presents an improved bistatic nonlinear chirp scaling (NLCS) algorithm for imaging oceanic scenes with GEO-SA UHF UWB BiSAR. This methodology extends the two-dimensional (2-D) spectrum up to the sixth order via the method of series reversion (MSR) to meet accuracy demands and then employs an elliptical model to elucidate the alterations in the azimuth frequency modulation (FM) rate mismatch. Initially, the imaging geometry and signal model are introduced, and then a separation of bistatic slant ranges based on the configuration is proposed. In addition, during range processing, after eliminating linear range cell migration (RCM), the derivation process for the sixth-order 2-D spectrum is detailed and an improved filter is applied to correct the high-order RCM. Finally, during azimuth processing, the causes of the FM rate mismatch are analyzed, a cubic perturbation function derived from the elliptical model is used for FM rate equalization, and a unified sixth-order filter is applied to complete the azimuth compression. Experimental results with point targets and natural oceanic scenes validate the outstanding efficacy of the proposed NLCS algorithm, particularly in imaging quality enhancements for GEO-SA UHF UWB BiSAR.

Geosynchronous (GEO) spaceborne–airborne very high-frequency ultra-wideband bistatic synthetic aperture radar (VHF UWB BiSAR) can conduct high-resolution and wide-swath imaging for ocean scenes. However, GEO spaceborne–airborne VHF UWB BiSAR imaging faces some challenges such as the geometric configuration, huge amount of echo data, serious range–azimuth coupling, large spatial variance, and complex motion error, which increases the difficulty of the high-efficiency and high-precision imaging. In this paper, we present an improved bistatic fast factorization backprojection (FFBP) algorithm for ocean scene imaging using the GEO satellite-unmanned aerial vehicle (GEO-UAV) VHF UWB BiSAR, which can solve the above issues with high efficiency and high precision. This method reconstructs the subimages in the orthogonal elliptical polar (OEP) coordinate system based on the GEO satellite and UAV trajectories as well as the location of the imaged scene, which can further reduce the computational burden. First, the imaging geometry and signal model of the GEO-UAV VHF UWB BiSAR are established, and the construction of the OEP coordinate system and the subaperture imaging method are proposed. Moreover, the Nyquist sampling requirements for the subimages in the OEP coordinate system are derived from the range error perspective, which can offer a near-optimum tradeoff between precision and efficiency. In addition, the superiority of the OEP coordinate system is analyzed, which demonstrates that the angular dimensional sampling rate of the subimages is significantly reduced. Finally, the implementation processes and computational burden of the proposed algorithm are provided, and the speed-up factor of the proposed FFBP algorithm compared with the BP algorithm is derived and discussed. Experimental results of ideal point targets and natural ocean scenes demonstrate the correctness and effectiveness of the proposed algorithm, which can achieve near-optimal imaging performance with a low computational burden.