Search

金沢大学ナノ生命科学研究所, Spontaneous unidirectional, or vectorial, insertion of transmembrane peptides is a fundamental biophysical process for toxin and viral actions. Polytheonamide B (pTB) is a potent cytotoxic peptide with a β6.3-helical structure. Previous experimental studies revealed that the pTB inserts into the membrane in a vectorial fashion and forms a channel with its single molecular length long enough to span the membrane. Also, molecular dynamics simulation studies demonstrated that the pTB is prefolded in aqueous solution. These are unique features of pTB because most of the peptide toxins form channels through oligomerization of transmembrane helices. Here, we performed all-atom molecular dynamics simulations to examine the dynamic mechanism of the vectorial insertion of pTB, providing underlying elementary processes of the membrane insertion of a prefolded single transmembrane peptide. We find that the insertion of pTB proceeds with only the local lateral compression of the membrane in three successive phases: “landing,” “penetration,” and “equilibration” phases. The free energy calculations using the replica-exchange umbrella sampling simulations present an energy cost of 4.3 kcal/mol at the membrane surface for the membrane insertion of pTB from bulk water. The trajectories of membrane insertion revealed that the insertion process can occur in two possible pathways, namely “trapped” and “untrapped” insertions; in some cases, pTB is trapped in the upper leaflet during the penetration phase. Our simulations demonstrated the importance of membrane anchoring by the hydrophobic N-terminal blocking group in the landing phase, leading to subsequent vectorial insertion., Embargo Period 12 months

Membrane proteins embedded in the membrane undergo changes in their actions under the influence of membrane lipids. Here, we present a novel type of lipid action on the potassium channel KcsA from Streptomyces lividans. Cardiolipin is present in various cellular membranes, including the host membrane of KcsA. Although the M0 domain, a nontransmembrane helix, is known to sense anionic lipids in the inner leaflet, we found that divalent anionic cardiolipin in the outer leaflet of the membrane interacts with positively charged residues, Arg64 and Arg89, on the extracellular side of the transmembrane domain. This binding propagates its action across the membrane toward the intracellular region of KcsA, thus, opening the inner gate. Such a long-range allosteric effect has not been found for channel–lipid interactions.

Molecular mechanisms underlying channel-membrane interplay have been extensively studied. Cholesterol, as a major component of the cell membrane, participates either in specific binding to channels or via modification of membrane physical features. Here, we examined the action of various sterols (cholesterol, epicholesterol, etc.) on a prototypical potassium channel (KcsA). Single-channel current recordings of the KcsA channel were performed in a water-in-oil droplet bilayer (contact bubble bilayer) with a mixed phospholipid composition (azolectin). Upon membrane perfusion of sterols, the activated gate at acidic pH closed immediately, irrespective of the sterol species. During perfusion, we found that the contacting bubbles changed their shapes, indicating alterations in membrane physical features. Absolute bilayer tension was measured according to the principle of surface chemistry, and inherent bilayer tension was ∼5 mN/m. All tested sterols decreased the tension, and the nonspecific sterol action to the channel was likely mediated by the bilayer tension. Purely mechanical manipulation that reduced bilayer tension also closed the gate, whereas the resting channel at neutral pH never activated upon increased tension. Thus, rather than conventional stretch activation, the channel, once ready to activate by acidic pH, changes the open probability through the action of bilayer tension. This constitutes a channel regulating modality by two successive stimuli. In the contact bubble bilayer, inherent bilayer tension was high, and the channel remained boosted. In the cell membrane, resting tension is low, and it is anticipated that the ready-to-activate channel remains closed until bilayer tension reaches a few millinewton/meter during physiological and pathological cellular activities.

Ion selectivity of the potassium channel is crucial for regulating electrical activity in living cells; however, the mechanism underlying the potassium channel selectivity that favors large K(+) over small Na(+) remains unclear. Generally, Na(+) is not completely excluded from permeation through potassium channels. Herein, the distinct nature of Na(+) conduction through the prototypical KcsA potassium channel was examined. Single-channel current recordings revealed that, at a high Na(+) concentration (200 mM), the channel was blocked by Na(+), and this blocking was relieved at high membrane potentials, suggesting the passage of Na(+) across the channel. At a 2,000 mM Na(+) concentration, single-channel Na(+) conductance was measured as one-eightieth of the K(+) conductance, indicating that the selectivity filter allows substantial conduit of Na(+). Molecular dynamics simulations revealed unprecedented atomic trajectories of Na(+) permeation. In the selectivity filter having a series of carbonyl oxygen rings, a smaller Na(+) was distributed off-center in eight carbonyl oxygen-coordinated sites as well as on-center in four carbonyl oxygen-coordinated sites. This amphipathic nature of Na(+) coordination yielded a continuous but tortuous path along the filter. Trapping of Na(+) in many deep free energy wells in the filter caused slow elution. Conversely, K(+) is conducted via a straight path, and as the number of occupied K(+) ions increased to three, the concerted conduction was accelerated dramatically, generating the conductance selectivity ratio of up to 80. The selectivity filter allows accommodation of different ion species, but the ion coordination and interactions between ions render contrast conduction rates, constituting the potassium channel conductance selectivity.

金沢大学ナノ生命科学研究所, Ion selectivity of the potassium channel is crucial for regulating electrical activity in living cells; however, the mechanism underlying the potassium channel selectivity that favors large K+ over small Na+ remains unclear. Generally, Na+ is not completely excluded from permeation through potassium channels. Herein, the distinct nature of Na+ conduction through the prototypical KcsA potassium channel was examined. Single-channel current recordings revealed that, at a high Na+ concentration (200 mM), the channel was blocked by Na+, and this blocking was relieved at high membrane potentials, suggesting the passage of Na+ across the channel. At a 2,000 mM Na+ concentration, single-channel Na+ conductance was measured as one-eightieth of the K+ conductance, indicating that the selectivity filter allows substantial conduit of Na+. Molecular dynamics simulations revealed unprecedented atomic trajectories of Na+ permeation. In the selectivity filter having a series of carbonyl oxygen rings, a smaller Na+ was distributed off-center in eight carbonyl oxygen-coordinated sites as well as on-center in four carbonyl oxygen-coordinated sites. This amphipathic nature of Na+ coordination yielded a continuous but tortuous path along the filter. Trapping of Na+ in many deep free energy wells in the filter caused slow elution. Conversely, K+ is conducted via a straight path, and as the number of occupied K+ ions increased to three, the concerted conduction was accelerated dramatically, generating the conductance selectivity ratio of up to 80. The selectivity filter allows accommodation of different ion species, but the ion coordination and interactions between ions render contrast conduction rates, constituting the potassium channel conductance selectivity., Embargo Period 6 months

Data of the osmotic water permeability of a lipid bilayer (diphytanoylphosphaticylcholin) in the presence of cholesterol (30 mole%) are shown under the simultaneous measurement of bilayer tension. Detailed methods and procedures for evaluating the water permeability using the moving membrane method (K. Yano, M. Iwamoto, T. Koshiji & S. Oiki: Visualizing the Osmotic Water Permeability of a Lipid Bilayer under Measured Bilayer Tension Using a Moving Membrane Method. Journal of Membrane Science, 627 (2021) 119231) are presented. The planar lipid bilayer is formed in a glass capillary, separating two aqueous compartments with different osmolarities, and osmotically-driven water flux is visualized as membrane movements along the capillary. The water permeability was evaluated under constant membrane area and tension after correcting for the unstirred layer effect. In these measurements, geometrical features, such as the edge of the planar lipid bilayer and the contact angle between bilayer and monolayer, were image-analyzed. The unstirred layer was evaluated electrophysiologically, in which gramicidin A channel was employed. In the presence of an osmotic gradient, the gramicidin channel generates the streaming potential, and the measured streaming potential data and the derived water-ion coupling ratio (water flux/ion flux) are shown. Detailed descriptions of the integrated method of the moving membrane allow researchers to reproduce the experiment and give opportunities to examine water permeability of various types of membranes, including those containing aquaporins. The present data of osmotic water permeability are compared with the previously published data, while they neglected the bilayer tension.

Various types of channels vary their function by membrane tension changes upon cellular activities, and lipid bilayer methods allow elucidation of direct interaction between channels and the lipid bilayer. However, the dynamic responsiveness of the channel to the membrane tension remains elusive. Here, we established a time-lapse tension measurement system. A bilayer is formed by docking two monolayer-lined water bubbles, and tension is evaluated via measuring intrabubble pressure as low as

The thylakoid lumen is a membrane-enclosed aqueous compartment. Growing evidence indicates that the thylakoid lumen is not only a sink for protons and inorganic ions translocated during photosynthetic reactions but also a place for metabolic activities, e.g. proteolysis of photodamaged proteins, to sustain efficient photosynthesis. However, the mechanism whereby organic molecules move across the thylakoid membranes to sustain these lumenal activities is not well understood. In a recent study of Cyanophora paradoxa chloroplasts (muroplasts), we fortuitously detected a conspicuous diffusion channel activity in the thylakoid membranes. Here, using proteoliposomes reconstituted with the thylakoid membranes from muroplasts and from two other phylogenetically distinct organisms, cyanobacterium Synechocystis sp. PCC 6803 and spinach, we demonstrated the existence of nonselective channels large enough for enabling permeation of small organic compounds (e.g. carbohydrates and amino acids with M(r) < 1500) in the thylakoid membranes. Moreover, we purified, identified, and characterized a muroplast channel named here CpTPOR. Osmotic swelling experiments revealed that CpTPOR forms a nonselective pore with an estimated radius of ∼1.3 nm. A lipid bilayer experiment showed variable-conductance channel activity with a typical single-channel conductance of 1.8 nS in 1 m KCl with infrequent closing transitions. The CpTPOR amino acid sequence was moderately similar to that of a voltage-dependent anion-selective channel of the mitochondrial outer membrane, although CpTPOR exhibited no obvious selectivity for anions and no voltage-dependent gating. We propose that transmembrane diffusion pathways are ubiquitous in the thylakoid membranes, presumably enabling rapid transfer of various metabolites between the lumen and stroma.

Fluidity and mosaicity are two critical features of biomembranes, by which membrane proteins function through chemical and physical interactions within a bilayer. To understand this complex and dynamic system, artificial lipid bilayer membranes have served as unprecedented tools for experimental examination, in which some aspects of biomembrane features have been extracted, and to which various methodologies have been applied. Among the lipid bilayers involving liposomes, planar lipid bilayers and nanodiscs, recent developments of lipid bilayer methods and the results of our channel studies are reviewed herein. Principles and techniques of bilayer formation are summarized, which have been extended to the current techniques, where a bilayer is formed from lipid-coated water-in-oil droplets (water-in-oil bilayer). In our newly developed method, termed the contact bubble bilayer (CBB) method, a water bubble is blown from a pipette into a bulk oil phase, and monolayer-lined bubbles are docked to form a bilayer through manipulation by pipette. An asymmetric bilayer can be readily formed, and changes in composition in one leaflet were possible. Taking advantage of the topological configuration of the CBB, such that the membrane's hydrophobic interior is contiguous with the surrounding bulk organic phase, oil-dissolved substances such as cholesterol were delivered directly to the bilayer interior to perfuse around the membrane-embedded channels (membrane perfusion), and current recordings in the single-channel allowed detection of immediate changes in the channels' response to cholesterol. Chemical and mechanical manipulation in each monolayer (monolayer technology) allows the examination of dynamic channel-membrane interplay.

The water flux across the cell membrane is a fundamental physiological process ubiquitous to all cell types. For evaluating water permeability (Pf), volume changes of cells and vesicles have been employed to measure water flux. However, upon volume expansion, the membrane stretches, and Pf could vary with membrane tension changes. Moreover, local concentration polarization of solutes occurs at the membrane interface due to bulk water flux across the membrane (unstirred layer; UL), which hampers evaluation of Pf values. Here, we establish an accurate method for evaluating the osmotic Pf of lipid bilayers under constant bilayer tension and known unstirred layer. A lipid bilayer is formed across a glass capillary by docking monolayers at oil-water interfaces, and osmotically driven bulk water flux across the membrane yields translational membrane movements along the capillary (moving membrane method). Integrated electrical and image analyses allowed a quantitative evaluation of membrane tension, which remained constant during measurements. In parallel, the unstirred layer was quantified at the nearest vicinity of the membrane using the gramicidin channel as a sensor. Accordingly, Pf values without and with cholesterol were evaluated under known bilayer tension and unstirred layers. Pf of the gramicidin A channel was also measured.

Here, we have developed a method of oriented reconstitution of the KcsA potassium channel amenable to high-resolution AFM imaging. The solubilized full-length KcsA channels with histidine-tagged (His-tag) C-terminal ends were attached to a Ni2+-coated mica surface, and then detergent-destabilized liposomes were added to fill the interchannel space. AFM revealed that the membrane-embedded KcsA channels were oriented with their extracellular faces upward, seen as a tetrameric square shape. This orientation was corroborated by the visible binding of a peptide scorpion toxin, agitoxin-2. To observe the cytoplasmic side of the channel, a His-tag was inserted into the extracellular loop, and the oppositely oriented channels provided wholly different images. In either orientation, the channels were individually dispersed at acidic pH, whereas they were self-assembled at neutral pH, indicating that the oriented channels are allowed to diffuse in the membrane. This method is readily applicable to membrane proteins...

The mechanism underlying ion permeation through potassium channels still remains controversial. K

A functional characterization of channel proteins has been performed using planar lipid bilayers as the following procedure. For bacterial channels, such as the KcsA potassium channel, channel proteins were synthesized in Escherichia coli, followed by solubilization, purification, and incorporation into liposomes. Similarly, channel proteins were synthesized using an in vitro transcription/translation kit in the presence of liposomes. Then, these liposome-incorporated channels were served for electrophysiological recordings after liposome fusion into a preformed planar lipid bilayer. Here, we established a straightforward method for concurrent channel synthesis and functional measurement using a water-in-oil bubble bilayer system. Channel proteins were synthesized in vitro within a water-in-oil bubble, having a lipid bilayer at the contact with another bubble (in bulla synthesis). The channels were spontaneously incorporated into the lipid bilayer under application of the membrane potential, and we successfully detected nascent channel activities. This way our experiment has mimicked bacterial synthetic membrane in the presence of a resting membrane potential. Technical details for establishing the in bulla expression system are described.

Various methods have been developed for the formation of planar lipid bilayers, and recent techniques using water-in-oil droplets, such as droplet interface bilayer (DIB) and contact bubble bilayer (CBB) methods, allow the ready formation of bilayers with arbitrary lipid compositions. Here, we developed a simple and portable DIB system using drop-in-wells, shaping two merging wells for settling electrolyte droplets. An aliquot of the electrolyte solution (1μL) is dropped into an organic solvent, and the droplet sinks to the drop-in-well at the bottom, where two monolayer-lined droplets come in contact to form the bilayer. Pre-installed electrodes allow electrophysiological measurements. The detailed drop-in-well method is presented, and some variations of the method, such as the use of microelectrodes and a sheet with a small hole for low-noise recordings, are extended. Examples of single channel current recordings of the KcsA potassium channel are demonstrated.

Lipid bilayers provide a unique experimental platform for functional studies of ion channels, allowing the examination of channel-membrane interactions under various membrane lipid compositions. Among them, the droplet interface bilayer has gained popularity; however, the large membrane size hinders the recording of low electrical background noise. We have established a contact bubble bilayer (CBB) method that combines the benefits of planar lipid bilayer and patch-clamp methods, such as the ability to vary the lipid composition and to manipulate the bilayer mechanics, respectively. Using the setup for conventional patch-clamp experiments, CBB-based experiments can be readily performed. In brief, an electrolyte solution in a glass pipette is blown into an organic solvent phase (hexadecane), and the pipette pressure is maintained to obtain a stable bubble size. The bubble is spontaneously lined with a lipid monolayer (pure lipids or mixed lipids), which is provided from liposomes in the bubbles. Next, the two monolayer-lined bubbles (~50 µm in diameter) at the tip of the glass pipettes are docked for bilayer formation. Introduction of channel-reconstituted liposomes into the bubble leads to the incorporation of channels in the bilayer, allowing for single-channel current recording with a signal-to-noise ratio comparable to that of patch-clamp recordings. CBBs with an asymmetric lipid composition are readily formed. The CBB is renewed repeatedly by blowing out the previous bubbles and forming new ones. Various chemical and physical perturbations (e.g., membrane perfusion and bilayer tension) can be imposed on the CBBs. Herein, we present the basic procedure for CBB formation.

A functional characterization of channel proteins has been performed using planar lipid bilayers as the following procedure. For bacterial channels, such as the KcsA potassium channel, channel proteins were synthesized in Escherichia coli, followed by solubilization, purification, and incorporation into liposomes. Similarly, channel proteins were synthesized using an in vitro transcription/translation kit in the presence of liposomes. Then, these liposome-incorporated channels were served for electrophysiological recordings after liposome fusion into a preformed planar lipid bilayer. Here, we established a straightforward method for concurrent channel synthesis and functional measurement using a water-in-oil bubble bilayer system. Channel proteins were synthesized in vitro within a water-in-oil bubble, having a lipid bilayer at the contact with another bubble (in bulla synthesis). The channels were spontaneously incorporated into the lipid bilayer under application of the membrane potential, and we successfully detected nascent channel activities. This way our experiment has mimicked bacterial synthetic membrane in the presence of a resting membrane potential. Technical details for establishing the in bulla expression system are described.

Various methods have been developed for the formation of planar lipid bilayers, and recent techniques using water-in-oil droplets, such as droplet interface bilayer (DIB) and contact bubble bilayer (CBB) methods, allow the ready formation of bilayers with arbitrary lipid compositions. Here, we developed a simple and portable DIB system using drop-in-wells, shaping two merging wells for settling electrolyte droplets. An aliquot of the electrolyte solution (1 μL) is dropped into an organic solvent, and the droplet sinks to the drop-in-well at the bottom, where two monolayer-lined droplets come in contact to form the bilayer. Pre-installed electrodes allow electrophysiological measurements. The detailed drop-in-well method is presented, and some variations of the method, such as the use of microelectrodes and a sheet with a small hole for low-noise recordings, are extended. Examples of single channel current recordings of the KcsA potassium channel are demonstrated.

Although interactions between lipids and membrane proteins (MPs) have been considered crucially important for understanding the functions of lipids, lack of useful and convincing experimental methods has hampered the analysis of the interactions. Here, we developed a surface plasmon resonance (SPR)-based concise method for quantitative analysis of lipid-MP interactions, coating the sensor chip surface with self-assembled monolayer (SAM) with C6-chain. To develop this method, we used bacteriorhodopsin (bR) as an MP, and examined its interaction with various types of lipids. The merits of using C6-SAM-modified sensor chip are as follows: (1) alkyl-chains of SAM confer a better immobilization of MPs because of the efficient preconcentration due to hydrophobic contacts; (2) SAM provides immobilized MPs with a partial membranous environment, which is important for the stabilization of MPs; and (3) a thinner C6-SAM layer (1 nm) compared with MP size forces the MP to bulge outward from the SAM surface, allowing extraneously injected lipids to be accessible to the hydrophobic transmembrane regions. Actually, the amount of bR immobilized on C6-SAM is 10 times higher than that on a hydrophilic CM5 sensor chip, and AFM observations confirmed that bR molecules are exposed on the SAM surface. Of the lipids tested, S-TGA-1, a halobacterium-derived glycolipid, had the highest specificity to bR with a nanomolar dissociation constant. This is consistent with the reported co-crystal structure that indicates the formation of several intermolecular hydrogen bonds. Therefore, we not only reproduced the specific lipid-bR recognition, but also succeeded in its quantitative evaluation, demonstrating the validity and utility of this method.

The β6.3-helical channel of the marine cytotoxic peptide, polytheonamide B (pTB), is examined in water, the POPC bilayer, and a 1 : 1 chloroform/methanol mixture using all-atom molecular dynamics simulations. The structures and fluctuations of the β6.3-helix of pTB are investigated in the three environments. The average structure of pTB calculated in the mixed solvent is in good agreement with the NMR-resolved structure in the mixed solvent, indicating the validity of the parameters used for the non-standard groups in pTB. The configuration and dynamics of solvent molecules inside the pore are examined in detail. It is found that the motions of methanol molecules inside the pore are not correlated because of the absence of strong hydrogen bonds (HBs) between adjacent methanol molecules. On the other hand, the motions of water molecules inside the pore are highly correlated, both translationally and orientationally, due to the strong HBs between neighboring water molecules. It is suggested that the collective behavior of water molecules inside the pore in the membrane is crucial for the permeation of ions through the pTB channel.

The potassium channel is highly selective for K + over other monovalent cations, and the narrow pore structure with 3 A in diameter named the selectivity filter (SF) is responsible for the selective permeation. Here we applied the statistical mechanics of liquids called three-dimensional reference interaction site model (3D-RISM) theory, and the binding configurations of the monovalent cations, Li + , Na + and K + , with special attention on the contribution of water in the KcsA potassium channel were examined. All the three types of cations are bound in the open SF with high affinity, but with different binding coordinations: the in-cage configuration by eight carbonyl oxygens for K + , and the in-plane configuration by four carbonyl oxygens for Li + , whereas both configurations are allowed for Na + . In each case, water contributes an integral part of the ion coordination. In the case of Li + , a linear water-Li + -water complex is settled into two adjacent cages with the Li + centered at the in-plane site. Positions of water around Na + are more flexible, which may allow a transition between in-plane and in-cage configurations. K + stably occupied in-cage configuration, and water occupies adjacent cages. The results provide the distinct configuration of ion and water in the SF, and serves clues for elementary process of selectivity.

Amphidinol 3 (AM3) is an anti-fungal polyene extracted from a marine dinoflagellate. Here, we examined the ion channel activity and membrane-embedded structure of AM3 using a lipid bilayer method and atomic force microscopy (AFM). AM3 exhibited large-conductance (~1 nS) and non-selective single-channel activity only when sterols were present in the membrane leaflet of the AM3-added side. The variable conductance suggests the formation of a multimeric barrel-stave pore. At high AM3 concentrations, giant-conductance “jumbo” channels (~40 nS) emerged. AFM revealed a thicker raft-like membrane phase with the appearance of a wrinkled surface, in which phase pores (diameter: ~10 nm) were observed. The flip-flop of ergosterol occurred only after the appearance of the jumbo channel, indicating that the jumbo channel induced a continuity between the outer and inner leaflets of the membrane: a feature characteristic of toroidal-like pores. Thus, AM3 forms different types of sterol-aided polymorphic channels in a concentration dependent manner.

The potassium channel is highly selective for K+ over Na+, and the mechanism underlying this selectivity remains unclear. We show the three-dimensional distribution functions (3D-DFs) of small cations (Li+, Na+, and K+) and the free energy profile of ions inside the open selectivity filter (SF) of the KcsA channel. Our previous results [S. Phongphanphanee, N. Yoshida, S. Oiki, F. Hirata. Abstract Book of 5th International Symposium on Molecular Science of Fluctuations toward Biological Functions, P062 (2012)] indicate that the 3D-DF for K+ exhibits distinct peaks at the sites formed by the eight carbonyl oxygen atoms belonging to the surrounding peptide-backbone and residues (the cage site). Li+ has sharp distributions in the 3D-DF at the center of a quadruplex composed of four carbonyl oxygen atoms (the plane site). Na+ has a rather diffuse distribution throughout the SF region with peaks both in the plane and in cage sites. The results provide microscopic evidence of the phenomenological findings that Li+ and Na+ are not excluded from the SF region and that the binding affinity alone does not cause the ion selectivity of KcsA. In the present study, with an ion placed explicitly along the pore axis, the free energy profiles of the ions inside the SF were calculated; from these profiles we suggest a new mechanism for selective K+ permeation. According to the model, a K+ ion must overcome a free energy barrier that is approximately half that of Na+ to exit from either of the SF mouths due to the existence of an intermediate local minimum along the route for climbing the barriers.

金沢大学ナノ生命科学研究所, The mechanism underlying ion permeation through potassium channels still remains controversial. K+ ions permeate across a narrow selectivity filter (SF) in a single file. Conventional scenarios assume that K+ ions are tightly bound in the SF, and, thus, they are displaced from their energy well by ion–ion repulsion with an incoming ion. This tight coupling between entering and exiting ions has been called the “knock-on” mechanism. However, this paradigm is contradicted by experimental data measuring the water–ion flux coupling ratio, demonstrating fewer ion occupancies. Here, the results of molecular dynamics simulations of permeation through the KcsA potassium channel revealed an alternative mechanism. In the aligned ions in the SF (an ion queue), the outermost K+ was readily and spontaneously released toward the extracellular space, and the affinity of the relevant ion was ~ 50 mM. Based on this low-affinity regime, a simple queueing mechanism described by loose coupling of entering and exiting ions is proposed., Embargo Period 12 months

金沢大学ナノ生命科学研究所, Agitoxin-2 (AgTx2) from scorpion venom is a potent blocker of K+ channels. The docking model has been elucidated, but it remains unclear whether binding dynamics are described by a two-state model (AgTx2-bound and AgTx2-unbound) or a more complicated mechanism, such as induced fit or conformational selection. Here, we observed the binding dynamics of AgTx2 to the KcsA channel using high-speed atomic force microscopy. From images of repeated binding and dissociation of AgTx2 to the channel, single-molecule kinetic analyses revealed that the affinity of the channel for AgTx2 increased during persistent binding and decreased during persistent dissociation. We propose a four-state model, including high- and low-affinity states of the channel, with relevant rate constants. An induced-fit pathway was dominant and accelerated binding by 400 times. This is the first analytical imaging of scorpion toxin binding in real time, which is applicable to various biological dynamics including channel ligands, DNA-modifier proteins, and antigen-antibody complexes.

Structural changes of the KcsA potassium channel fixed on gold electrode surface in the upright orientation were studied by surface-enhanced IR absorption spectroscopy (SEIRAS). Measurements were performed at neutral pH, where the activation gate is kept closed. Band intensities were enhanced for the asymmetric (1565 cm−1) and symmetric (1405 cm−1) OCO-carboxylate groups at negative electrode potentials in the K+ solution, but not in the Na+ solution. Even for the reverse-oriented channel, the enhanced OCO-carboxylate band was evident at negative potential. When TBA was loaded in the central cavity, the K+-specific OCO band was not elicited. These results indicate that the negative electrode potential renders the local K+ concentration accumulated at the vicinity of the electrode surface, and the KcsA channel bathed in high K+ changes conformation of the selectivity filter from the collapsed to the open, and OCO-carboxylate groups (D80 and E71) in the back of the filter were rearranged.

The potassium channel is highly selective for K(+) over Na(+), and the selectivity filter binds multiple dehydrated K(+) ions upon permeation. Here, we applied attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy to extract ion-binding-induced signals of the KcsA potassium channel at neutral pH. Shifts in the peak of the amide-I signal towards lower vibrational frequencies were observed as K(+) was replaced with Na(+). These ion species-specific shifts deduced the selectivity filter as the source of the signal, which was supported by the spectra of a mutant for the selectivity filter (Y78F). The difference FTIR spectra between the solution containing various concentrations of K(+) and that containing pure Na(+) demonstrated two types of peak shifts of the amide-I vibration in response to the K(+) concentration. These signals represent the binding of K(+) ions to the different sites in the selectivity filter with different dissociation constants (KD = 9 or 18 mM).

The mechanisms of ion permeation through potassium channels have been extensively examined. Molecular dynamics (MD) simulations have demonstrated that rapidly permeating ions collide near the selectivity filter (SF) ("knock-on" mechanism), but this oversimplified mechanism is insufficient to account for the experimentally observed single-channel current amplitudes. Here, we analyzed the MD-simulated ion trajectories through a Kv1.2 potassium channel using an event-oriented analysis method, and surprisingly, we found that the nanocavity (NC) governs ion permeation in a digital fashion. The NC has a maximal diameter of 10 Å and stands between the intracellular bulk solution and the SF, which holds only up to one K(+) during permeation. Accordingly, the K(+) concentration in the intracellular solution is translated as a digitalized zero or one K(+) in the NC. When the ion number in the NC is zero, the multiple ions in the SF are mostly immobilized. By contrast, when the number of ions in the NC is one, the structured water in the NC mediates the ion-occupied status to the queueing ions in the SF, and the ions then initiate a collective outward motion. Accordingly, the one ion in the NC serves as a catalytic intermediate for permeation, which quantitatively accounts for the experimentally obtained conductance-concentration relationships. We conclude that the ion movements are coherent across the entire pore.

A hydrogen-bonded water-chain in a nanotube is highly proton conductive, and examining the proton flux under electric fields is crucial to understanding the one-dimensional Grotthuss conduction. Here, we exploited a nanotube-forming natural product, the peptide polytheonamide B (pTB), to examine proton conduction mechanisms at a single-molecule level. The pTB nanotube has a length of ∼40 A that spans the membrane and a uniform inner diameter of 4 A that holds a single-file water-chain. Single-channel proton currents were measured using planar lipid bilayers in various proton concentrations and membrane potentials (±400 mV). We found, surprisingly, that the current-voltage curves were asymmetric with symmetric proton concentrations in both solutions across the membrane (rectification). The proton flux from the C-terminal to the N-terminal end was 1.6 times higher than that from the opposite. At lower proton concentrations, the degree of rectification was attenuated, but with the addition of a pH-buffer (dichloroacetate) that supplies protons near the entrance, the rectification emerged. These results indicate that the permeation processes inside the pore generate the rectification, which is masked at low concentrations by the diffusion-limited access of protons to the pore entrance. The permeation processes were characterized by a discrete-state Markov model, in which hops of a proton followed by water-chain turnovers were implemented. The optimized model revealed that the water-chain turnover exhibited unusual voltage dependence, and the distinct voltage-dependencies of the forward and backward transition rates yielded the rectification. The pTB nanotube serves as a rectified proton conductor, and the design principles can be exploited for proton-conducting materials.

Outward currents through Kir2.1 channels regulate the electrical properties of excitable cells. These currents are subject to voltage-dependent attenuation by the binding of polyamines to high- and low-affinity sites, which leads to inward rectification, thereby controlling cell excitability. To examine the effects of positive charges at the low-affinity site in the cytoplasmic pore on inward rectification, we studied a mutant Kir channel (E224K/H226E) and measured single-channel currents and streaming potentials (Vstream), the latter provide the ratio of water to ions queued in a single-file permeation process in the selectivity filter. The water-ion coupling ratio was near one at a high K+ concentration ([K+]) for the wild-type channel and increased substantially as [K+] decreased. On the other hand, fewer ions occupied the selectivity filter in the mutant at all [K+]. A model for the Kir channel involving a K+ binding site in the wide pore was introduced. Model analyses revealed that the rate constants associated with the binding and release to and from the wide-pore K+ binding site was modified in the mutant. These effects lead to the reduced contribution of a conventional two-ion permeation mode to total conductance, especially at positive potentials, thereby inward rectification.

Polytheonamide B is a linear 48-residue peptide with alternating d- and l-amino acids. It forms a single β6.3-helix structure and acts as a cation-selective ion channel. We performed normal mode an...

Voltage-gated proton channels are found in many different types of cells, where they facilitate proton movement through the membrane. The mechanism of proton permeation through the channel is an issue of long-term interest, but it remains an open question. To address this issue, we examined the temperature dependence of proton permeation. Under whole cell recordings, rapid temperature changes within a few milliseconds were imposed. This method allowed for the measurement of current amplitudes immediately before and after a temperature jump, from which the ratios of these currents (Iratio) were determined. The use of Iratio for evaluating the temperature dependence minimized the contributions of factors other than permeation. Temperature jumps of various degrees (DeltaT, -15 to 15 degrees C) were applied over a wide temperature range (4-49 degrees C), and the Q10s for the proton currents were evaluated from the Iratios. Q10 exhibited a high temperature dependence, varying from 2.2 at 10 degrees C to 1.3 at 40 degrees C. This implies that processes with different temperature dependencies underlie the observed Q10. A novel resistivity pulse method revealed that the access resistance with its low temperature dependence predominated in high temperature ranges. The measured temperature dependence of Q10 was decomposed into Q10 of the channel and of the access resistances. Finally, the Q10 for proton permeation through the voltage-gated proton channel itself was calculated and found to vary from 2.8 at 5 degrees C to 2.2 at 45 degrees C, as expected for an activation enthalpy of 64 kJ/mol. The thermodynamic features for proton permeation through proton-selective channels were discussed for the underlying mechanism.

To characterize drug binding to the human ether-a-go-go related gene (hERG) channel, a synergic approach interplaying patch-clamp experiments and a docking study was developed. Mutations were introduced into concatenated dimers of the hERG channel that were assembled into a heterotetramer with mutated diagonal subunits. The binding affinities of three drugs (cisapride, terfenadine, and N-[4-[[1-[2-(6-methyl-2-pyridinyl)ethyl]-4-piperidinyl]carbonyl]phenyl]methanesulfonamide dihydrochloride (E-4031, 1)) to a set of mutant channels were examined electrophysiologically to assess the involved residues, their number, and relative positions. Cisapride and 1 interacted with Tyr652 residues on adjacent subunits, while terfenadine interacted with Tyr652 residues on diagonal, but not on adjacent, subunits. Phe656 was involved in the binding of all three drugs, and Ser624 was found to be only involved in cisapride and 1. The docking models demonstrated that pi-pi and CH-pi interactions rather than cation-pi interaction play a key role in drug binding to the hERG channel.

Recent studies have led us to suppose that synergistic action of multiple solute cofactors could play substantial roles in amyloid-type fibrillogenesis of pathogenic polypeptides. To support this view, we performed aggregation experiments of human islet amyloid polypeptide (IAPP) in media containing both polyanions and non-polar solvents. The results demonstrated that the fibrillation at sub-micromolar IAPP occurred only when polyanionic and non-polar solutes coexist. A simple sum of two independent cofactor’s effects could not account for the synergistic action. We propose that this synergy of polyanionic and nonpolar milieus could substantially modify the amyloidgenesis in the human body.

The KcsA potassium channel is a prototypical channel of bacterial origin, and the mechanism underlying the pH-dependent gating has been studied extensively. With the high-resolution atomic force microscopy (AFM), we have resolved functional open and closed gates of the KcsA channel under the membrane-embedded condition. Here we surprisingly found that the pH-dependent gating of the KcsA channels was associated with clustering-dispersion dynamics. At neutral pH, the resting, closed channels were coalesced, forming nanoclusters. At acidic pH, the open-gated channels were dispersed as singly isolated channels. Time-lapse AFM revealed reversible clustering-dispersion transitions upon pH changes. At acidic equilibrium, a small fraction of the channels was nanoclustered, in which the gate was apparently closed. Thus, it is suggested that opening of the gate and the dispersion are tightly linked. The interplay between the intramolecular conformational change and the supramolecular clustering-dispersion dynamics provides insights into understanding of unprecedented functional cooperativity of channels.

Surface-enhanced IR absorption spectroscopy (SEIRAS) is a powerful tool for studying the structure of molecules adsorbed on an electrode surface (ATR-SEIRA). Coupled with an electrochemical system, structural changes induced by changes in the electric field can be detected. All the membrane proteins are subjected to the effect of membrane electric field, but conformational changes at different membrane potentials and their functional relevance have not been studied extensively except for channel proteins. In this contribution, background information of potential-dependent functional and structural changes of a prototypical channel, the KcsA channel, is summarized, and SEIRAS applied to the KcsA channel under the application of the potential is shown. The potassium channels allow K(+) to permeate selectively through the structural part called the selectivity filter, in which dehydrated K(+) ions interact with backbone carbonyls. In the absence of K(+), the selectivity filter undergoes conformational changes to the non-conductive collapsed conformation. To apply the electric field, the KcsA channels were fixed on the gold surface in either upside or reverse orientation. The SEIRA spectrum in K(+) or Na(+) solution revealed both backbone structural changes and local changes in the OCO-carboxylate groups. Upon application of the negative electric field, the spectrum of OCO was enhanced only in the K(+) solution. These results indicate that the negative electric field accumulates local K(+) concentration, which turned the collapsed filter to the conductive conformation. ATR-SEIRA serves as an unprecedented experimental system for examining membrane proteins under an electric field.

The X-ray structure of KcsA, a eubacterial potassium channel, displays a selectivity filter composed of four parallel peptide strands. The backbone carbonyl oxygen atoms of these strands solvate multiple K(+) ions. KcsA structures show different distributions of ions within the selectivity filter in solutions containing different cations. To assess the interactions of cations with the selectivity filter, we used attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy. Ion-exchange-induced ATR-FTIR difference spectra were obtained by subtracting the spectrum of KcsA soaked in K(+) solution from that obtained in Li(+), Na(+), Rb(+), and Cs(+) solutions. Large spectral changes in the amide-I and -II regions were observed upon replacing K(+) with smaller-sized cations Li(+) and Na(+) but not with larger-sized cations Rb(+) and Cs(+). These results strongly suggest that the selectivity filter carbonyls coordinating Rb(+) or Cs(+) adopt a conformation similar to those coordinating K(+) (cage configuration), but those coordinating Li(+) or Na(+) adopt a conformation (plane configuration) considerably different from those coordinating K(+). We have identified a cation-type sensitive amide-I band at 1681 cm(-1) and an insensitive amide-I band at 1659 cm(-1). The bands at 1650, 1639, and 1627 cm(-1) observed for Na(+)-coordinating carbonyls were almost identical to those observed in Li(+) solution, suggesting that KcsA forms a similar filter structure in Li(+) and Na(+) solutions. Thus, we conclude that the filter structure adopts a collapsed conformation in Li(+) solution that is similar to that in Na(+) solution but is in clear contrast to the X-ray crystal structure of KcsA with Li(+).