Search

In recent years, there has been a mounting occurrence of lung cancer, which stands as one of the most prevalent malignancies globally. This rise in incidence poses a significant hazard to human health, making lung cancer a matter of grave concern. It has been shown that tRNA-derived small non-coding RNA (tsRNA) is involved in the development of tumors, especially lung cancer, through mechanisms such as regulating mRNA stability, influencing protein translation, and acting as epigenetic regulators. Recent studies have shown that tsRNA is abnormally expressed in the plasma and tissues of lung cancer patients, and its expression level is closely related to the malignancy degree and postoperative recurrence of lung cancer. Therefore, for lung cancer patients, tsRNA represents a promising non-invasive biomarker, exhibiting significant potential for facilitating early diagnosis and prognostic evaluation, and for achieving precision treatment of lung cancer by regulating its expression. This article focuses on the biogenesis of tsRNA and its ability to promote lung cancer cell proliferation and invasion. In addition, the specific clinical significance of tsRNA in lung cancer was discussed. Finally, we discuss the need for further improvement of small RNA sequencing technology, and the future research directions and strategies of tsRNA in lung cancer and tumor diseases were summarized.

This paper obtained an additively manufactured high-strength Al–Li alloy by laser powder bed fusion (LPBF) based on a third generation AA2195 alloy powder raw material. The relationship between the process optimization, microstructure evolution, and mechanical properties of the as-printed (AP) and heat-treated (HT) specimens was established for the first time to explain the intergranular fracture sensibility during LPBF and reveal the dominant precipitation strengthening mechanism induced by the subsequent heat treatment. The precipitation order of AP Al–Li alloy at the last stage of the solidification process was: L (Liquid phase) →T2 (Al6CuLi3) + θ′(Al2Cu) + δ′/β' (Al3(Li,Zr)) + T (LiAlSi) + Ω (AlCuMgAg). The micro-cracks caused by a relatively high grain boundary coverage of interconnected film-like eutectic phases, as well as micro-voids caused by the localized slip between the coarse T2-phases and soft precipitate-free zones, resulted in the high intergranular fracture sensibility. The well-designed T6 heat treatment of 515 °C/60 min solution treatment and 170 °C/6 h aging treatment was conducted to maximize the precipitation strengthening by T1-phases. The precipitation order of HT Al–Li alloy was supersaturated solid solution → GP zone + δ′/β' → θ′ + T1 (Al2CuLi) + ω (Al7Cu2Fe) + β′. The presence of continuously distributed T1-cells along the grain boundaries was not only capable of providing a pinning effect on dislocations movement and boundary migration, but also able to shorten the pile-up distance on the slip plane. Such phenomena improved the resistance ability of Al–Li alloys to mechanical damage and permitted a significant strength enhancement.

Abstract In this paper, the tribological characteristics of an oil-soluble magnetic fluid additive under mixed lubrication are studied by experiments and numerical simulation. [bmim][FeCl4] is dissolved in CF10W-40 lubricating oil as a magnetic liquid additive, and its friction coefficient is tested by a point contact friction tester at different temperatures, rotational speeds and magnetic field intensities. The transition condition of lubrication state is obtained through analyzing the Stribeck curves based on the experiments, and the strength model of boundary film is established accordingly. A mixed lubrication model is established by substituting the boundary film strength model and the surface roughness model into the hydrodynamic lubrication model based on Reynolds equation. The results show that the magnetic solution as an additive can obviously reduce friction and wear, and the effect is more obvious under the condition of magnetic field. The boundary film strength model can accurately reflect the transition characteristics of lubrication state in the presence of boundary film, and the mixed lubrication model based on boundary film strength model can more precisely reflect the tribological characteristics of friction pairs, so this study provides a new theoretical method for the related research on the influence of boundary film on lubrication characteristics.

High-rise buildings are inherently vulnerable to substantial wind-induced forces. The increasing complexity of building designs has posed challenges in calculating wind loads, while traditional methods involving physical models have proven to be intricate and time-consuming. In order to overcome these obstacles, this paper investigates a theoretical methodology aimed at streamlining the computation of wind loads. In the initial theoretical exploration, a simplified mathematical model based on Green’s function is introduced to take into account the interaction between wind loads and building geometry, while the model is not user-friendly and difficult to solve for complex polygonal buildings. To overcome this challenge, the study incorporates numerical simulations to extend the ideas and refine the methodology. To simplify the problem from a three-dimensional to a two-dimensional context, a bold tangential field assumption is made, assuming the wind pressure distribution remains similar across horizontal sections at different heights. The Schwarz–Christoffel formulation is then employed to facilitate the transformation. By integrating Green’s functions and conformal mapping to solve potential flow problems beyond the boundary layer, a comprehensive mathematical derivation is established. The above broadens the applicability of the mathematical theory and provides a new direction for estimations of high-speed wind load on buildings.

This study introduces a low-friction composite based on PEEK to improve its friction and wear properties. The composite incorporates PTFE as a solid lubricant and utilizes PPTA as a reinforcing material within the PEEK matrix. These components were prepared utilizing a compression molding method, followed by a series of exploratory experiments to identify the optimal preparation conditions for PEEK. This research assesses how the PTFE/PPTA/PEEK composites perform in terms of friction and wear under dry and oil-lubricated conditions. By examining wear tracks using scanning electron microscopy and white light interference microscopy, this study aims to uncover the wear mechanisms of PEEK and its composites under different lubrication scenarios. Results show that the main wear mechanisms for the PTFE/PPTA/PEEK composites and bearing steel are ploughing and adhesive wear. The presence of PPTA helps reduce wear by leveraging its strong fibers and thermal stability, while the coefficient of friction decreases as PTFE creates a smooth, solid lubricating film on the surface. Notably, PEEK composites containing 25 wt% PTFE and 6 wt% PPTA demonstrate the lowest wear rates and reduced coefficient of friction in both dry and oil-lubricated conditions.

This study investigates the effect of the elastic surface micro-texture on the cavitation and lubrication characteristics of the friction pairs through theoretical and experimental research. Through numerical simulations and experiments, the influences of the elastic modulus and sliding speed on the lubrication performance of the friction pair are studied. The results show that under certain speed and load conditions, the friction coefficient of the elastic texture is smaller, and the lubrication performance is better than that of the rigid texture. Increasing the sliding speed and texture spacing properly can improve the lubrication performance of elastic friction pairs. In addition, as the elastic modulus decreases, the elastic deformation and oil film thickness increase, and the cavitation phenomenon becomes more significant. Thus, the lubrication performance of the friction pair is improved.

Wire-based additive manufacturing (AM) shows a promising prospect in fabricating large-scale titanium aerospace components at a high deposition rate and low cost. The currently used wire-based AM processes commonly utilize a lateral feeding method with an acute angle to form a deposit, which reduces the flexibility and increases the difficulty of control in making complex components. In this work, a novel coaxial laser metal wire deposition (LMWD) process was used to fabricate the most widely used titanium alloy, Ti6Al4V. The coaxial wire feeding was achieved by a coaxial laser head through a vertically fed wire surrounded by an annular shape beam at focal plane. The surface quality, microstructure and mechanical properties of the deposited Ti6Al4V were examined. To show the characteristic of the coaxial LMWD process, conventional lateral LMWD was also conducted for comparison. The deposited Ti6Al4V wall showed a high surface quality and a microstructure with a mix of equiaxed β grains and columnar prior-β grains rather than coarse prior-β grains. The refined microstructure resulted in a low anisotropy in mechanical properties. The mechanism of the equiaxed β grains formation was also discussed. The combined effect of the reduced thermal gradient and the heterogeneous nucleation from the coaxial wire feeding played an important role in determining the refined microstructures in coaxial LMWD.

Abstract Hypoxia-induced cisplatin resistance is a major challenge during non-small cell lung cancer (NSCLC) treatment. Based on previous studies, we further explored the effect of eukaryotic initiation factor 5A2 (eIF5A2) in hypoxia-induced cisplatin resistance. In this study, we found that autophagy and cisplatin resistance were increased under hypoxic conditions in three different NSCLC cell lines. Compared with that under normoxic conditions, dramatic upregulation of eIF5A2 and hypoxia inducible factor 1 subunit alpha (HIF-1α) levels were detected under hypoxia exposure. Small interfering RNA silencing of HIF-1α resulted in decreased expression of eIF5A2, indicating that eIF5A2 acts downstream of HIF-1α. In addition, the expression of eIF5A2 was significantly higher in NSCLC tumors compared with that in normal tissues. RNA silencing-mediated downregulation of eIF5A2 decreased hypoxia-induced autophagy, thereby reducing hypoxia-induced cisplatin resistance in NSCLC cells. The roles of eIF5A2 in cisplatin resistance were further validated in vivo. Combined treatment using eIF5A2-targeted downregulation together with cisplatin significantly inhibited tumor growth compared with cisplatin alone in the subcutaneous mouse model. In conclusions, eIF5A2 overexpression is involved in hypoxia-induced autophagy during cisplatin resistance. We suggest that a combination of eIF5A2 targeted therapy and cisplatin chemotherapy is probably an effective strategy to reverse hypoxia-induced cisplatin resistance and inhibit NSCLC development.

For the marine industry, resistance reduction can reduce energy consumption and achieve protection of the marine environment. The use of air lubrication to reduce the resistance of ships is one of the most important ways. With this technology, high-speed air cavity crafts show immense potential as they can be utilized in various marine activities, such as emergency rescue, supply, and maritime security. Through experiments, this study presents an in-depth analysis of the effects of bubble chamber pressure and initial stern inclination on the resistance of high-speed air cavity crafts at different speeds. The results show that air pressure has a significant impact on resistance. It was found that as the speed of the ship increased, the resistance reduction effect became more prominent under the same pressure conditions. Moreover, the resistance tended to stabilize when the pressure reached a certain value. In addition to the air pressure, the longitudinal inclination does have an effect on resistance reduction. To achieve better resistance reduction, the initial stern inclination angle should be chosen appropriately. Furthermore, adjusting the angle with speed changes can optimize the resistance reduction effect. This experimental study provides critical support for conducting further research on high-speed air cavity crafts. The findings offer valuable insights into improving hull forms, guiding host selection, and assessing performance.

Abstract Background Castor bean (Ricinus communis L.) is an important oil crop, which belongs to the Euphorbiaceae family. The seed oil of castor bean is currently the only commercial source of ricinoleic acid that can be used for producing about 2000 industrial products. However, it remains largely unknown regarding the origin, domestication, and the genetic basis of key traits of castor bean. Results Here we perform a de novo chromosome-level genome assembly of the wild progenitor of castor bean. By resequencing and analyzing 505 worldwide accessions, we reveal that the accessions from East Africa are the extant wild progenitors of castor bean, and the domestication occurs ~ 3200 years ago. We demonstrate that significant genetic differentiation between wild populations in Kenya and Ethiopia is associated with past climate fluctuation in the Turkana depression ~ 7000 years ago. This dramatic change in climate may have caused the genetic bottleneck in wild castor bean populations. By a genome-wide association study, combined with quantitative trait locus analysis, we identify important candidate genes associated with plant architecture and seed size. Conclusions This study provides novel insights of domestication and genome evolution of castor bean, which facilitates genomics-based breeding of this important oilseed crop and potentially other tree-like crops in future.

There were rare clinical reports on clear cell tumor of the lung (CCTL). The clinical characteristics and underlying genetic mutation status of CCTL are poorly understood. From 2012 to 2017, patients pathologically diagnosed with CCTL in our hospital were investigated and analyzed based on clinical manifestations, pathological characteristics, prognosis and full gene mutation status through next generation sequencing (NGS) technology. During a 6-year period, four eligible patients were diagnosed with CCTL through surgical resection and were included in this study. All patients showed solitary nodules or lumps located in the left lung. The average maximum diameter of lesions was 2.5 ± 1.1 cm. Computed tomography (CT) imaging characteristics of these nodules/lumps demonstrated the features of benign tumors. The hematoxylin-eosin (HE) morphology and immunohistochemistry were consistent with the histopathological features of benign CCTL. Subsequent NGS analysis showed frame shift mutations of F2421/E2419, K1466E mutation, and p. 1450_1456 deletion mutation in mTOR gene in two of four patient samples and amplifications of MCL1 were observed in three of four samples. CCTL is a rare type of primary pulmonary mesenchymal tumor with good prognosis. Preliminary diagnosis on CT is usually sclerosing pneumocytoma. It is still unclear whether the occurrence and development of the disease are related to specific gene mutation. In this study, the genomic findings of frame shift mutation of mTOR genes and amplification of MCL1 gene in CCTL suggest that these mutations might play a role in proliferation of CCTL.

The shock initiation randomness problem of energetic materials (SIREM) is an important problem in the research field of energetic material safety. With the purposes of solving SIREM on a macroscopic scale and obtaining the statistics, such as the initiation probabilities of energetic materials and the statistical characteristics of the detonation pressure, this paper considers the effect of the randomness of the parameters of the Lee–Tarver equation of reaction rate and the JWL equation of state of energetic materials and the randomness of load intensity parameters—such as fragment shock velocity—on the randomness of the shock initiations of energetic materials. It then decomposes SIREM into an initiation probability problem (IP) and a detonation pressure randomness problem (DPR). Further, with the Back Propagation Neural Networks optimized by the Genetic Algorithm (GABPNN) as the surrogate models of the numerical models of two-phase reactive flow, this paper proposes the approach of solving IP and DPR in turn, adopting Monte Carlo Simulations, which use the calculations of GABPNNs as repeated sampling tests (GABP-MCSs). Finally, by taking the shock initiation randomness problem of Composition B as an applied example, this paper adopts GABP-MCS under the randomness conditions that the means of fragment shock velocities are 1050 m/s and 1000 m/s and that the coefficients of variation (CVs) of BRVs are 0.005, 0.01, 0.015, and 0.02 in order to obtain the initiation probabilities of Composition B and the statistical characteristics, such as the means and CVs of the detonation pressure. It further observes the variation tendencies that these statistics show under various randomness conditions, so as to prove the effectiveness of GABP-MCS in solving SIREM. Therefore, this paper investigates SIREM on a macroscopic scale and proposes a universal technique for solving SIREM by GABP-MCS, in the hope of shedding some light on the SIREM study.

For the influence of boundary film on the lubrication state of sliding friction pairs, a boundary film strength model was proposed that can comprehensively reflect the influences of film thickness, pressure, shear stress and temperature. The model parameters were obtained through fitting the test results. Then, a mixed lubrication model considering boundary film strength was established by coupling the boundary film strength model with the hydrodynamic lubrication model and the asperity contact model. The calculation program was developed using the Fortran language, which can effectively capture the tribological characteristics and action ratios of the fluid, boundary film and dry friction components. Simultaneously, the mixed lubrication model was applied to the journal bearing. A parametric analysis was performed to investigate the influences of different working conditions on lubrication performance. Under current operating conditions, the results show that: when the speed is above 200 r/min or the viscosity is higher than 0.09 Pa·s, the boundary film breakdown rate is almost 0 and the friction coefficient is lower than 0.02; when the roughness is reduced from 1.8 μm to 0.8 μm, the ultimate load of the journal bearing rises from 27 MPa to 36 MPa, an increase of about 33%; when the load exceeds 36 MPa or the temperature is higher than 100 °C, more than 25% of the boundary film breaks and the dry friction component accounts for more than 60% of the total friction, which leads to a sudden increase in the friction coefficient. Hence, the study of mixed lubrication considering boundary film strength provides theoretical guidance for accurately reflecting the actual lubrication state and improving the mechanical energy efficiency of friction pairs.

Autophagy is closely associated with the tumor immune microenvironment (TIME) and prognosis of patients with lung adenocarcinoma (LUAD). In the present study, we established a signature on the basis of long noncoding RNAs (lncRNAs) related to autophagy (ARlncRNAs) to investigate the TIME and survival of patients with LUAD. We selected ARlncRNAs associated with prognosis to construct a model and divided each sample into different groups on the basis of risk score. The ARlncRNA signature could be recognized as an independent prognostic factor for patients with LUAD, and patients in the low-risk group had a greater survival advantage. Kyoto Encyclopedia of Genes and Genomes and Gene Ontology enrichment analysis suggested that several immune functions and pathways were enriched in different groups. A high-risk score correlated significantly negatively with high abundance of immune cells and stromal cells around the tumor and high tumor mutational burden. Low-risk patients had a higher PD-1, CTLA-4, and HAVCR2 expression and had a better efficacy of immune checkpoint inhibitors, including PD-1/CTLA-4 inhibitor. A reliable signature on the basis of ARlncRNAs was constructed to explore the TIME and prognosis of patients with LUAD, which could provide valuable information for individualized LUAD treatment.

The objective of this study was to investigate the performance of pipelines repaired with carbon-fibre-reinforced polymer (CFRP) under external pressure. The repaired pipeline experienced defects in terms of thinning of its local inner wall. The three-dimensional finite element method was used to analyse the collapse pressure of repaired pipes with internal corrosion defects. The traction–separation law and interlaminar damage criterion were applied to simulate the collapse process of repaired pipes. The results show that the collapse pressure of the composite-repaired pipe increased and the CFRP significantly reduced the strain in the defect region. It was observed that the ovality of the corrosion defect region was reduced and that the repair effectiveness mainly depended on the length, thickness, and interlayer cohesion.

Objective To study the effects of saikosaponin D (SSD) on proliferation and apoptosis in human non-small cell lung cancer cell lines, and to explore underlying mechanisms. Methods Following treatment with saikosaponin D, A549 and H1299 cells were assessed for anti-proliferation effects using cell cycle kit-8 assays, changes in nuclear morphology using 4′,6-diamidino-2-phenylindole (DAPI) staining, and cell apoptosis using annexin V/propidium iodide double staining. Proliferation- and apoptosis-related proteins were detected by immunoblotting. Results Saikosaponin D had dose-dependent inhibitory effects on A549 cells (IC 50 , 3.57 µM) and H1299 cells (IC 50 , 8.46 µM). DAPI staining revealed decreased cell numbers, and most H1299 cells became round after treatment with 20 µM saikosaponin D. As saikosaponin D concentration increased, the proportions of cells in G0/G1 phase, and cells undergoing apoptosis, increased. Levels of phosphorylated p44/42 and signal transducer and activator of transcription (STAT)3 were significantly downregulated in both cell lines, while total STAT3 levels were not significantly affected. The cleaved form of caspase 3 was significantly upregulated. Conclusions Saikosaponin D inhibits proliferation, inducing cell cycle arrest and apoptosis, in lung cancer cells in a dose-dependent manner, possibly through inhibition of STAT3 phosphorylation and activation of caspase 3.

Laser oscillating welding method was employed to welding of Invar alloy so as to achieve grain refinement and decrease internal defects. Effects of frequency and amplitude of beam oscillation with sinusoidal trajectory on weld appearance and solidification microstructure were researched. The essential effect of beam oscillation could be attributed to change the laser energy deposition distribution on the processing surface. Optical metallographic and electron backscattered diffraction analysis results demonstrated that beam oscillation could achieve the transformation of solidification microstructure from oriented dendrite grain to equiaxed dendrite grain. Further, the application of beam oscillation might retard solidification cooling speed and strengthen the formation of γ -fiber texture that is conducive to the improvement of ductility. According to the acquisition of dynamic feature pictures with high-speed camera, the local rapid movement of laser spot resulted in a more stable keyhole without fluctuation and the intensification of melt flow. Temperature curves calculated by finite element method simulation showed that lateral laser oscillation made the temperature distribution of molten metals nearby the center of weld more uniform even negative temperature gradient. The comprehensive description of grain refinement mechanism caused by beam oscillation was presented on the basis of the experiment and simulation analyses. Keywords: Grain refinement, Laser oscillating welding, Invar alloy, Solidification microstructure, Finite element method

Abstract Background Crizotinib is a multi-target inhibitor approved for the treatment of advanced non-small-cell lung cancer patients with a ROS1 rearrangement. However, interstitial lung disease is a rare but severe and fatal side effect of crizotinib that should lead to immediate discontinuation of the drug. Unfortunately, the pathophysiology, molecular mechanism and risk factors for crizotinib-induced interstitial lung disease remain poorly understood. Case presentation We first identified and reported interstitial lung disease induced de novo by crizotinib in a 47-year-old female patient who was diagnosed with advanced lung adenocarcinoma with a ROS1 rearrangement in a malignant pleural effusion. Subsequent next-generation sequencing analysis revealed both ROS1 rearrangement and an EGFR exon 19 deletion mutation in lung biopsy specimens, which were histologically confirmed to be interstitial lung disease. Although crizotinib treatment was ceased immediately and a shock treatment with high-dose methylprednisolone as well as other necessary treatment procedures was applied to reverse the interstitial lung disease process, the patient died. Conclusions The present case indicates that while treating non-small-cell lung cancer patients with crizotinib, it is important to constantly monitor any newly emerging respiratory symptoms and unexplained imaging changes, which may suggest an adverse effect related to drug-induced interstitial lung disease or even lethality. Histopathology and molecular pathological examination of lung biopsy specimens may help clinicians understand the development mechanism and exclude other causes.

[This corrects the article DOI: 10.1371/journal.pone.0187350.].

Maize (Zea mays L.) is a staple crop worldwide with extensive genetic variations. Various insects attack maize plants causing large yield loss. Here, we investigated the responses of maize B73, a susceptible line, and Mo17, a resistant line, to the aphid Rhopalosiphum padi on metabolite and transcriptome levels. R. padi feeding had no effect on the levels of the defensive metabolites benzoxazinoids (Bxs) in either line, and Mo17 contained substantially greater levels of Bxs than did B73. Profiling of the differentially expressed genes revealed that B73 and Mo17 responded to R. padi infestation specifically, and importantly, these two lines showed large gene expression differences even without R. padi herbivory. Correlation analysis identified four transcription factors (TFs) that might account for the high Bx levels in Mo17. Similarly, genome-wide alternative splicing (AS) analyses indicated that both B73 and Mo17 had temporally specific responses to R. padi infestation, and these two lines also exhibited large differences of AS regulation under normal condition, and 340 genes, including 10 TFs, were constantly differentially spliced. This study provides large-scale resource datasets for further studies on the mechanisms underlying maize-aphid interactions, and highlights the phenotypic divergence in defense against aphids among maize varieties.

Patients with stage IV non-small cell lung cancer (NSCLC) comprise a heterogeneous group, and the optimal treatment for this group of patients is complex and debatable. We aimed to assess the effect of local thoracic therapy combined with chemotherapy on cancer specific survival (CSS). To evaluate the CSS of four subgroups of patients with stage IV NSCLC according to four different treatment modalities: combined modality of Chemotherapy, Surgery, and Radiation (Chem+Sur+RT), Chemotherapy and Radiation (Chem+RT), Chemotherapy and Surgery (Chem+Sur), and Chemotherapy only (Chem Only) by analyzing the Surveillance, Epidemiology, and End Results (SEER)-registered database. Kaplan-Meier methods were adopted and multivariable Cox regression models were built for the analysis of survival outcomes and risk factors. The 3-year CSS was 33.5% in "Chem+Sur+RT" group, 9.3% in "Chem+RT" group, 42.7% in "Chem+Sur" group and 11.8% in "Chem Only" group, which had significant difference in univariate log-rank test (P

To ensure the structural safety and reliability of coal mine rescue capsule in disastrous surroundings after gas explosion, in this paper, the thermomechanical coupling effect on a certain structure subjected to gas explosion was analyzed, and then a novel rescue capsule with a combination of radius and square features was designed according to the underground surroundings and relevant regulations on mine rescue devices. Foremost, the coupling mechanism of thermal-fluid-solid interaction between gas explosion shock wave and rescue capsule and the thermal dynamic response of the capsule subjected to explosion load of gas/air mixture was investigated and revealed by employing LS-DYNA. The variation laws and characteristics of stress field, displacement field, and temperature field of the capsule were analyzed based on the simulation results. Results show that the structural safety, tightness, and reliability of the capsule meet the requirements of the national safety regulations. The design method presented in this work provides a new thought for design of coal mine rescue capsule.

Wind energy, one of the most sustainable renewable energy sources, has been extensively developed worldwide. However, owing to the strong regional and seasonal differences, it is necessary to first evaluate wind energy resources in detail. In this study, the offshore wind characteristics and wind energy potential of Bohai Bay (38.7° N, 118.7° E), China, were statistically analyzed using two-year offshore wind data with a time interval of one second. Furthermore, Nakagami and Rician distributions were used for wind energy resource assessment. The results show that the main wind direction in Bohai Bay is from the east (−15°−45°), with a speed below 12 m/s, mainly ranging from 4 to 8 m/s. The main wind speed ranges in April and October are higher than those in August and December. The night wind speed is generally higher than that in the daytime. The Nakagami and Rician distributions performed reasonably in calculating the wind speed distributions and potential assessments. However, Nakagami distribution provided better wind resource assessment in this region. The wind potential assessment results suggest that Bohai Bay could be considered as a wind class I region, with east as the dominant wind direction.

Biomass energy has been used for decades in lieu of fossil fuels. However, biomass, such as wheat straw, typically contains a high concentration of alkali elements, which is likely to induce unfavorable conditions during combustion, such as slagging, agglomeration, and corrosion in the boiler. This study investigated the effects of leaching on the chemical compounds and sintering temperatures of wheat straw ash before and after leaching by tap water. Ash melting and sintering degree tests were conducted using hot-stage microscopy and a scanning electron microscope, respectively. The results show that the ash content in wheat straw decreased by 26.09% (from 4.14% to 3.06%) following leaching, as did the chlorine (Cl), sulfur (S), and nitrogen (N). Meanwhile, the ash-related elements such as potassium (K), magnesium (Mg), and silicon (Si) reduced after leaching too. Additionally, the higher heating value increased slightly, from 19.25 to 19.53 MJ/kg. At the same time, leaching improved the ash melting temperatures of wheat straw during combustion and minimized the ash sintering degree. Similar results were also shown in scanning electron microscope (SEM) images, which clearly indicated that the leached samples had a lighter sintering degree than the original samples. Overall, the leaching process had a positive effect on the ash sintering problems of wheat straw.

Launch safety of explosive charges has become an urgent problem to be solved by all countries in the world as launch situation of ammunition becomes consistently worse. However, the existing numerical models have different defects. This paper formulates an efficient computational model of the combustion of an explosive charge affected by a bottom gap in the launch environment in the context of the material point method. The current temperature is computed accurately from the heat balance equation, and different physical states of the explosive charges are considered through various equations of state. Microcracks in the explosive charges are described with respect to the viscoelastic statistical crack mechanics (Visco–SCRAM) model. The method for calculating the temperature at the bottom of the explosive charge with respect to the bottom gap is described. Based on this combustion model, the temperature history of a Composition B (COM B) explosive charge in the presence of a bottom gap is obtained during the launch process of a 155-mm artillery. The simulation results show that the bottom gap thickness should be no greater than 0.039 cm to ensure the safety of the COM B explosive charge in the launch environment. This conclusion is consistent with previous results and verifies the correctness of the proposed model. Ultimately, this paper derives a mathematical expression for the maximum temperature of the COM B explosive charge with respect to the bottom gap thickness (over the range of 0.00–0.039 cm), and establishes a quantitative evaluation method for the launch safety of explosive charges. The research results provide some guidance for the assessment and detection of explosive charge safety in complex launch environments. [ABSTRACT FROM AUTHOR]