Search

Implant-supported immediate loading full-arch rehabilitation has been documented in the literature. More recently, computed surgical guides have frequently been used since they facilitate planning and performing surgical treatment without the need to raise a flap, thus reducing trauma and morbidity. This case report describes an immediate full-arch, fixed rehabilitation with full loading placed on four commercially available 3D-printed implants, with a 24-month follow-up. The implants were placed with the help of a digitally planned 3D-printed surgical guide. The provisional fixed prosthesis installed immediately was replaced after 3 months. At the time, the soft and hard tissue around the implants appeared stable, without signs of inflammation. The same situation was observed at the 24-month follow-up. Three-dimensional-printed implants seem to be a promising choice in this case. However, further clinical studies with longer follow-up periods are necessary to confirm their efficacy. [ABSTRACT FROM AUTHOR]

Smiling expresses emotions and affects interpersonal relationships, influencing self‐esteem and social life. Nowadays, concerns about aesthetics and access to the Internet have made people more informed and demanding about treatments for gingival smile. Excessive gingival display (EGD) is caused by a variety of factors that can act alone or in combination. These factors may include altered passive eruption (APE), vertical maxillary excess, a short upper lip, and hyperactive upper lip, among other factors that cause gingival hyperplasia. In this case report, the EGD was caused by vertical maxillary excess, hypermobility of the upper lip, and APE. The proposed treatment included two procedures: the Modified Lip Repositioning Surgery (Modified LipStat) Technique, with internal sutures to attempt to restrict the traction of the upper lip elevator muscles, and Esthetic Crown Lengthening (ECL) from the right first premolar to the left first premolar for the treatment of APE. The result provided an aesthetic improvement of the smile, with harmonization in relation to the size of the teeth. The mobility of the upper lip in spontaneous smiles remained reduced up to 6 months of follow‐up; however, there was a partial relapse in the position of the upper lip during spontaneous smiling at the end of 6 years of follow‐up. [ABSTRACT FROM AUTHOR]

Background. Rehabilitation in the anterior region requires specific conditions for success, such as the presence of papilla, emergence profile, and balance between pink and white esthetic. Objectives. This systematic review aimed to evaluate the esthetic risk associated with immediate implant placement with immediate restoration in the anterior superior area, where the facial bone plate may be absent or deficient. Materials and methods. The search was done in PubMed, Embase, Cochrane, Lilacs, Scopus, Scielo, and Google Scholar databases. The investigation involved clinical studies and observational studies published between January 2012 and July 2023. Studies were excluded if there was less than 12-month follow-up, no immediate restoration or facial defect, heavy smokers, or systemic disease. The risk of bias was assessed using the ROBINS-I and Modified-Cochrane RoB tools. Results. Twelve studies were included in this systematic review. The thinner the facial plate, the higher the alveolus's risk of gingival recession or shrinkage. There was an increased interproximal recession when the thin phenotype was associated with flap surgery. An increase in pink esthetic score (PES) was reached when immediate implant placement (IIP) and immediate restoration were done. Soft tissue augmentation achieved more gingival-level stability. Regardless of the initial phenotype, an esthetic outcome was delivered. The risk of bias was high in 1 study and moderate in 3 studies. Conclusions. It is possible to conclude that esthetic results and increased final PES or patient satisfaction index in IIP treatments associated with immediate restoration could be obtained even in buccal bone wall defects or gingival recession, regardless of their extension. [ABSTRACT FROM AUTHOR]

This study investigated the impact of adding hydroxyapatite nanoparticles to implant surfaces treated with zirconia blasting and acid etching (ZiHa), focusing on structural changes and bone healing parameters in low-density bone sites. The topographical characterization of titanium discs with a ZiHa surface and a commercially modified zirconia-blasted and acid-etched surface (Zi) was performed using scanning electron microscopy, profilometry, and surface-free energy. For the in vivo assessment, 22 female rats were ovariectomized and kept for 90 days, after which one implant from each group was randomly placed in each tibial metaphysis of the animals. Histological and immunohistochemical analyses were performed at 14 and 28 days postoperatively (decalcified lab processing), reverse torque testing was performed at 28 days, and histometry from calcified lab processing was performed at 60 days The group ZiHa promoted changes in surface morphology, forming evenly distributed pores. For bone healing, ZiHa showed a greater reverse torque, newly formed bone area, and bone/implant contact values compared to group Zi (p < 0.05; t-test). Qualitative histological and immunohistochemical analyses showed higher features of bone maturation for ZiHa on days 14 and 28. This preclinical study demonstrated that adding hydroxyapatite to zirconia-blasted and acid-etched surfaces enhanced peri-implant bone healing in ovariectomized rats. These findings support the potential for improving osseointegration of dental implants, especially in patients with compromised bone metabolism. [ABSTRACT FROM AUTHOR]

Objective: To evaluate the long‐term survival and success rates of implants placed in reconstructed areas using microvascularized or non‐microvascularized extraoral bone grafts. Materials and Methods: An electronic search was performed in five databases and in gray literature for articles published until June, 2023. The eligibility criteria comprised observational studies (prospective or retrospective) and clinical trials, reporting survival and success rates of implants placed in extraoral bone grafts. A meta‐analysis (implant failure) was categorized into subgroups based on the type of bone graft used. The risk of bias within studies was assessed using the Newcastle‐Ottawa Scale. Results: Thirty‐one studies met the inclusion criteria. The mean follow‐up time was 92 months. The summary estimate of survival rate at the implant level were 94.9% (CI: 90.1%–97.4%) for non‐vascularized iliac graft, 96.5% (CI: 91.4%–98.6%) for non‐vascularized calvaria graft, and 92.3% (CI: 89.1%–94.6%) for vascularized fibula graft. The mean success rate and marginal bone loss (MBL) were 83.2%; 2.25 mm, 92.2%; 0.93 mm, and 87.6%; 1.49 mm, respectively. Conclusions: Implants placed in areas reconstructed using extraoral autogenous bone graft have high long‐term survival rates and low long‐term MBLs. The data did not demonstrate clinically relevant differences in the survival, success, or MBL of grafts from different donor areas or with different vascularization. This systematic review was registered in INPLASY under number INPLASY202390004. [ABSTRACT FROM AUTHOR]

The present short-term retrospective study evaluated the implant survival rate and peri-implant bone loss around additive-manufactured titanium implants placed in sinuses grafted with Plenum Osshp (Plenum Bioengenharia, Jundia, SP, Brazil) (70HA:30β-TCP) material. A total of 39 implants were inserted after 23 sinus floor elevation procedures in 16 consecutive patients. Prosthetic rehabilitation included fixed partial prostheses (three units), single crowns (eleven units), and fixed full arches (three units). Clinical and radiographic parameters of implant-supported restorations were evaluated after at least one year of occlusal loading. The implant–crown success criteria included the absence of pain, suppuration, and clinical mobility, an average distance between the implant shoulder and the first visible bone contact (DIB) < 1.0 mm from the initial surgery, and the absence of prosthetic complications at the implant–abutment interface. The overall cumulative implant survival rate was 97.43%. No prosthetic complications at the implant–abutment interface were reported. After one year, the mean DIB was 0.23 mm ± 0.14. Within the limits of this retrospective study, it can be concluded that 70 HA:30 β-TCP allowed stable and reliable bone support to maintain healthy conditions around titanium dental implants produced by additive manufacturing. [ABSTRACT FROM AUTHOR]

The control of infectious diseases caused by biofilms is a continuing challenge for researchers due to the complexity of their microbial structures and therapeutic implications. Photodynamic therapy as an adjunctive anti-infective treatment has been described as a possible valid approach but has not been tested in polymicrobial biofilm models. This study evaluated the effect of photodynamic therapy in vitro with methylene blue (MB) 0.01% and red LEDs (λ = 660 nm, power density ≈ 330 mW/cm2, 2 mm distance from culture) on the metabolic activity and composition of a multispecies subgingival biofilm. Test Groups LED and MB + LED showed a more significant reduction in metabolic activity than the non-LED application group (~50 and 55%, respectively). Groups LED and MB equally affected (more than 80%) the total bacterial count in biofilms. No differences were noted in the bacterial biofilm composition between the groups. In vitro LED alone or the MB + LED combination reduced the metabolic activity of bacteria in polymicrobial biofilms and the total subgingival biofilm count. [ABSTRACT FROM AUTHOR]

This systematic review (SR) aimed to evaluate the antimicrobial potential of different types of platelet‐rich fibrin (PRF) often used in regenerative treatments. An electronic search was performed in four databases and in Gray literature for articles published until January, 2023. The eligibility criteria comprised in vitro studies that evaluated the antimicrobial effect of different types of PRF. For the analysis of the risk of bias within studies, the modified OHAT (Office of Health Assessment and Translation) tool was used. For the evaluation of the results, a qualitative critical analysis was carried out in the synthesis of the results of the primary studies. Sixteen studies published between 2013 and 2021 were included in this SR. The antimicrobial effects of PRF variations (PRF, injectable PRF [I‐PRF], PRF with silver nanoparticles [agNP‐PRF], and horizontal PRF [H‐PRF]), were analyzed against 16 types of bacteria from the oral, periodontal, and endodontic environments. All types of PRF showed significant antimicrobial action, with the antibacterial efficacy being more expressive than the fungal one. The I‐PRF, H‐PRF, and agNP‐PRF subtypes improve antimicrobial activity. According to the OHAT analysis, no study was classified as having a high risk of bias. Evidence suggests that PRF variations have significant antimicrobial activity, with bacterial action being greater than fungal. Evolutions such as I‐PRF, H‐PRF, and agNP‐PRF improve antimicrobial activity. Future studies analyzing the clinical effect of these platelets are fundamental. This SR was registered in INPLASY under number INPLASY202340016. [ABSTRACT FROM AUTHOR]