Search

Devices of solar water desalination confront many problems including the low thermal properties of phase change materials (PCMs) such as heat transfer, storage of heat capacity, charging and discharging capability. Thus, these properties need to be improved by using a simple and novel procedure. So, incorporation and dispersion of hybrid nano-powders inside PCMs is considered a simple and novel procedure to improve the thermal properties of solar water desalination devices. The present article is focused on incorporating different nano-powders of MWCNTs and Al2O3 inside PCMs to improve the thermal characteristics of solar water desalination applications. Different nano-powders of MWCNTs and Al2O3 have been incorporated as: (i) 1.0 mass% Al2O3, (ii) 1.0 mass% MWCNTs, and (iii) hybrid 1.0 mass% of Al2O3 + 1.0 mass% MWCNTs, inside a constant amount of 250 gm RT-65HC paraffin wax. An innovative prototype was designed and produced to measure the thermal characteristics of solar water desalination devices. Various analyses have been carried out to study the influence of nano-powders scattering on the morphological, microstructural observations, chemical and thermal characteristics, including SEM, XRD, FT-IR, TGA, DSC, thermal conductivity, and infrared thermography. Microstructural observations showed that the excellent dispersion of nano-powders was at hybrid nano-additives of 1.0 mass% MWCNTs + 1.0 mass% Al2O3 inside PCMs. The uniform scattering of hybrid 1.0 mass% MWCNTs + 1.0 mass% Al2O3 inside PCMs assists to eliminate any defects. Finally, thermal characteristics of hybrid nano-additives phase change materials (NAPCMs) were improved specially in thermal stability, latent heat temperature, and thermal conductivity at 89%, 80%, and 32.8%, respectively. [ABSTRACT FROM AUTHOR]

Oils and grease have beneficial effects on moving parts such as connecting rod, gears, shafts, and engine to reduce wear and friction. The properties of lubricants such as tribological and rheological properties are an important role in oils and grease characterization. Nano additives on lubricant oils play an important role in anti-wear; reduce the coefficient of friction and enhance the rheological properties. The Tribological and rheological behavior of base oil 15W50 which have different concentrations of multi-wall Carbon Nanotubes (MWCNTs) (0.5, 1, 1.5, and 2 wt%), and constant amount of graphene nanosheets (GNSs) (0.5 wt%) were investigated. This research is the first one in studying the effect of hybrid nano additives of (MWCNTs) and (GNs) on the tribological and rheological properties of lubricant oils. Tribological characterization was carried out on four ball testing model under different loads (200, 400, 600, and 800 N). The kinematic viscosity, flash point, pour point, and thermal conductivity of nanofluid added 15W50 lubricant are estimated and compared with base oil. The results showed that nano additives improve the wear scar and coefficient of friction by 78% and 48%, respectively. The flash point, thermal conductivity, kinematic viscosity, and pour point, were improved by 15%, 77%, 76.8%, and 20%, respectively compared with the base oil. The hybrid addition of CNTs/GNs nanoparticles enhanced the properties of 15W50 engine oil. [ABSTRACT FROM AUTHOR]