Search

Timber–concrete composite structure is a type of efficient combination form composed of concrete floors and timber beams or floors through shear connectors, and shows good application potential in the floor system of timber buildings. The long-term performance of the timber–concrete composite structures is complex and is affected by the creep of timber and concrete, as well as the long-term slip of the shear connectors. This article presents a comprehensive overview of the research status on the long-term behavior of timber–concrete composite members and different shear connectors. For the shear connectors, the effects of loading levels, environments, and component materials on their creep coefficients are summarized. As to the timber–concrete composite members, both the experimental and numerical investigations are gathered into discussions: the connection types, component materials, loading conditions, and durations in the long-term tests are also discussed; various models for describing long-term behavior of timber, concrete, and connection systems are provided, and then a comprehensive description of the progress of numerical investigations over the last decades is made. In addition, the suggestions for future research are proposed to reach a clearer understanding of the bending mechanisms and mechanical characteristics of timber–concrete composite structures. [ABSTRACT FROM AUTHOR]

Due to the low density and stiffness of wood, traditional timber floor systems are prone to producing large vibration responses. By combining timber beams with concrete floors, timber–concrete composite (TCC) floor systems show stronger bearing capacity, higher bending stiffness, and better thermal and sound insulation behaviors when compared with traditional timber floor systems. In this study, the vibration performance of TCC beams with crossed inclined coach screw connectors was investigated using dynamic tests. The influence of the screw diameters and slab dimensions on the dynamic performance of the composite beams was evaluated. The test results demonstrated that TCC beams show good dynamic performance when used as a floor component and meet the preliminary requirements of floor vibration comfort for fundamental frequency. The fundamental frequency and damping ratio of TCC beams decreases with the increase in slab dimensions. The bending stiffness and natural frequency of TCC beams decrease smoothly when reducing the screw diameter from 16 to 12 mm. Additionally, two theoretical models were used to predict the natural frequencies of the TCC beams, and the predicted values show good consistency with the measured ones. [ABSTRACT FROM AUTHOR]