Search

Electronic spectra of the Xe2 molecules in the energy range of 77700-89300 cm are recorded. The method of resonance enhanced multiphoton ionization of molecules in a supersonic molecular beam was used, in which excitation of the molecules by three photons was followed by ionization caused by a fourth photon (the (3+1) REMPI method). Analysis of the vibrational structure of observed systems of bands yielded information about the dissociation energy and the molecular constants for ungerade states of molecules. On the basis of the Franck-Condon principle, the equilibrium distances for potential curves were estimated from the relative intensities in vibrational progressions. Data on 16 new electronic states of diatomic xenon molecules with the dissociation limits Xe → XE(5 p S) + Xe*(5 p6 p,5 d, 7 s, 7 p) were obtained. [ABSTRACT FROM AUTHOR]

The electronic spectra of XeNe molecules in the range of 77100-90100 cm-1 are measured by the method of laser resonance multiphoton ionization in a supersonic jet. The photoionization spectra are obtained upon two- and three-photon excitations of molecules and their ionization by the next photon. In the range of 80300-90100 cm-1 near Xe*(5 d, 6 p’, 6 d, 7 s, and 7 p), the spectra are obtained for the first time. A whole number of vibrational systems are measured in this range. The majority of vibrational systems near Xe* (5 d, 6 d, 7 p, and 7 s) are located in the red range with respect to their dissociation limits. In the blue range with respect to the dissociation limits, continua corresponding to transitions of molecules from the ground state to repulsive potential curves of excited states are detected. For a number of excited states of XeNe molecules, the vibrational analysis is performed and molecular constants are estimated. [ABSTRACT FROM AUTHOR]

Computational methods have been established as cornerstones in optical imaging and holography in recent years. Every year, the dependence of optical imaging and holography on computational methods is increasing significantly to the extent that optical methods and components are being completely and efficiently replaced with computational methods at low cost. This roadmap reviews the current scenario in four major areas namely incoherent digital holography, quantitative phase imaging, imaging through scattering layers, and super-resolution imaging. In addition to registering the perspectives of the modern-day architects of the above research areas, the roadmap also reports some of the latest studies on the topic. Computational codes and pseudocodes are presented for computational methods in a plug-and-play fashion for readers to not only read and understand but also practice the latest algorithms with their data. We believe that this roadmap will be a valuable tool for analyzing the current trends in computational methods to predict and prepare the future of computational methods in optical imaging and holography., Supplementary Information: The online version contains supplementary material available at 10.1007/s00340-024-08280-3., Competing Interests: Conflict of interestThe authors declare no competing interests., (© The Author(s) 2024.)

The race for miniature color cameras using flat meta-optics has rapidly developed the end-to-end design framework using neural networks. Although a large body of work has shown the potential of this methodology, the reported performance is still limited due to fundamental limitations coming from meta-optics, mismatch between simulated and resultant experimental point spread functions, and calibration errors. Here, we use a HIL optics design methodology to solve these limitations and demonstrate a miniature color camera via flat hybrid meta-optics (refractive + meta-mask). The resulting camera achieves high-quality full-color imaging for a 5-mm aperture optics with a focal length of 5 mm. We observed a superior quality of the images captured by the hybrid meta-optical camera compared to a compound multi-lens optics of a mirrorless commercial camera.

End-to-end optimization of diffractive optical elements (DOEs) profile through a digital differentiable model combined with computational imaging have gained an increasing attention in emerging applications due to the compactness of resultant physical setups. Despite recent works have shown the potential of this methodology to design optics, its performance in physical setups is still limited and affected by manufacturing artefacts of DOE, mismatch between simulated and resultant experimental point spread functions, and calibration errors. Additionally, the computational burden of the digital differentiable model to effectively design the DOE is increasing, thus limiting the size of the DOE that can be designed. To overcome the above mentioned limitations, a co-design of hybrid optics and image reconstruction algorithm is produced following the end-to-end hardware-in-the-loop strategy, using for optimization a convolutional neural network equipped with quantitative and qualitative loss functions. The optics of the imaging system consists on the phase-only spatial light modulator (SLM) as DOE and refractive lens. SLM phase-pattern is optimized by applying the Hardware-in-the-loop technique, which helps to eliminate the mismatch between numerical modelling and physical reality of image formation as light propagation is not numerically modelled but is physically done. Comparison with compound multi-lens optics of a last generation smartphone and a mirrorless commercial cameras show that the proposed system is advanced in all-in-focus sharp imaging for a depth range 0.4-1.9 m.

In this paper, we detail a phase-shift implementation in a rotated plane-parallel plate (PPP). Considering the phase-shifting digital holography application, we provide a more precise phase-shift estimation based on PPP thickness, rotation, and mutual inclination of reference and object wavefronts. We show that phase retardation uncertainty implemented by the rotated PPP in a simple configuration is less than the uncertainty of a traditionally used piezoelectric translator. Physical experiments on a phase test target verify the high quality of phase reconstruction.

A power-balanced hybrid optical imaging system has a diffractive computational camera, introduced in this paper, with image formation by a refractive lens and multilevel phase mask (MPM). This system provides a long focal depth with low chromatic aberrations thanks to MPM and a high energy light concentration due to the refractive lens. We introduce the concept of optical power balance between the lens and MPM, which controls the contribution of each element to modulate the incoming light. Additional features of our MPM design are the inclusion of the quantization of the MPM's shape on the number of levels and the Fresnel order (thickness) using a smoothing function. To optimize the optical power balance as well as the MPM, we built a fully differentiable image formation model for joint optimization of optical and imaging parameters for the proposed camera using neural network techniques. We also optimized a single Wiener-like optical transfer function (OTF) invariant to depth to reconstruct a sharp image. We numerically and experimentally compare the designed system with its counterparts, lensless and just-lens optical systems, for the visible wavelength interval (400-700) nm and the depth-of-field range (0.5- ∞ m for numerical and 0.5-2 m for experimental). We believe the attained results demonstrate that the proposed system equipped with the optimal OTF overcomes its counterparts--even when they are used with optimized OTF--in terms of the reconstruction quality for off-focus distances. The simulation results also reveal that optimizing the optical power balance, Fresnel order, and the number of levels parameters are essential for system performance attaining an improvement of up to 5 dB of PSNR using the optimized OTF compared to its counterpart lensless setup.

A novel phase retrieval algorithm for broadband hyperspectral phase imaging from noisy intensity observations is proposed. It utilizes advantages of the Fourier transform spectroscopy in the self-referencing optical setup and provides additional, beyond spectral intensity distribution, reconstruction of the investigated object's phase. The noise amplification Fellgett's disadvantage is relaxed by the application of a sparse wavefront noise filtering embedded in the proposed algorithm. The algorithm reliability is proved by simulation tests and by results of physical experiments for transparent objects. These tests demonstrate precise phase imaging and object depth (profile) reconstruction.

Design and optimization of lensless phase-retrieval optical system with phase modulation of free-space propagation wavefront is proposed for subpixel imaging to achieve super-resolution reconstruction. Contrary to the traditional super-resolution phase-retrieval, the method in this paper requires a single observation only and uses the advanced Super-Resolution Sparse Phase Amplitude Retrieval (SR-SPAR) iterative technique which contains optimized sparsity based filters and multi-scale filters. The successful object imaging relies on modulation of the object wavefront with a random phase-mask, which generates coded diffracted intensity pattern, allowing us to extract subpixel information. The system's noise-robustness was investigated and verified. The super-resolution phase-imaging is demonstrated by simulations and physical experiments. The simulations included high quality reconstructions with super-resolution factor of 5, and acceptable at factor up to 9. By physical experiments 3 μm details were resolved, which are 2.3 times smaller than the resolution following from the Nyquist-Shannon sampling theorem.

In this paper, we have applied a recently developed complex-domain hyperspectral denoiser for the object recognition task, which is performed by the correlation analysis of investigated objects' spectra with the fingerprint spectra from the same object. Extensive experiments carried out on noisy data from digital hyperspectral holography demonstrate a significant enhancement of the recognition accuracy of signals masked by noise, when the advanced noise suppression is applied.

The paper is devoted to a computational super-resolution microscopy. A complex-valued wavefront of a transparent biological cellular specimen is restored from multiple intensity diffraction patterns registered with noise. For this problem, the recently developed lensless super-resolution phase retrieval algorithm [Optica, 4(7), 786 (2017)] is modified and tuned. This algorithm is based on a random phase coding of the wavefront and on a sparse complex-domain approximation of the specimen. It is demonstrated in experiments, that the reliable phase and amplitude imaging of the specimen is achieved for the low signal-to-noise ratio provided a low dynamic range of observations. The filterings in the observation domain and specimen variables are specific features of the applied algorithm. If these filterings are omitted the algorithm becomes a super-resolution version of the standard iterative phase retrieval algorithms. In comparison with this simplified algorithm with no filterings, our algorithm shows a valuable improvement in imaging with much smaller number of observations and shorter exposure time. In this way, presented algorithm demonstrates ability to work in a low radiation photon-limited mode., Competing Interests: The authors declare that there are no conflicts of interest related to this article.

A variational algorithm to object wavefront reconstruction from noisy intensity observations is developed for the off-axis holography scenario with imaging in the acquisition plane. The algorithm is based on the local least square technique proposed in paper [J. Opt. Soc. Am. A21, 367 (2004)]. First, multiple reconstructions of the wavefront are produced for various size and various directional windows applied for localization of estimation. At the second stage, a special statistical rule is applied in order to select the best window size estimate for each pixel of the image and for each of the directional windows. At the third final stage the estimates of the different directions obtained for each pixel are aggregated in the final one. Simulation experiments and real data processing prove that the developed algorithm demonstrate the performance of the extraordinary quality and accuracy for both the phase and amplitude of the object wavefront.