Search

Metallic/intermetalic materials with BCC structures hold an intrinsic instability due to phonon softening along [110] dirrection, causing BCC to lower-symmetry phases transformation when the BCC structures are thermally or mechanically stressed. Fe50Rh50 binary system is one of the exceptional BCC structures (ordered-B2) that has not been yet showing such transformation upon application of thermal stress, although mechanical deformation results in B2 to disordered FCC (gamma) and L10 phases transformation. Here, a comprehensive transmission electron microscopy (TEM) study is conducted on thermally-stressed samples of Fe50Rh50 aged at water and liquid nitrogen from 1150 degree C and 1250 degree C. The results show that, samples quenched from 1150 degree C into water and liquid nitrogen show presence of 1/4{110} and 1/2{110} satellite reflections, the latter of which is expected from phonon dispersion curves obtained by density functional theory calculation. Therefore, it is believed that Fe50Rh50 maintains the B2 structure that is in premartensite state. Once Fe50Rh50 is quenched from 1250 degree C into liquid nitrogen, formation of two short-range ordered tetragonal phases with various c/a ratios (~1.15 and 1.4) is observed in line with phases formed from mechanically deformed (30%) sample. According to our observations, an accurate atomistic shear model ({110}<1-10>) is presented that describes the martensitic transformation of B2 to these tetragonal phases. These findings offer implications useful for understanding of magnetic and physical characteristics of metallic/intermetallic materials.

A multi-stimuli cooling cycle can be used to increase the cyclic caloric performance of multicaloric materials like Ni-Mn-In Heusler alloys. However, the use of a uniaxial compressive stress as an additional external stimulus to a magnetic field requires good mechanical stability. Improvement of mechanical stability and strength by doping has been shown in several studies. However, doping is always accompanied by grain refinement and a change in transition temperature. This raises the question of the extent to which mechanical strength is related to grain refinement, transition temperature, or precipitates. This study shows a direct comparison between a single-phase Ni-Mn-Sn and a two-phase Gd-doped Ni-Mn-In alloy with the same transition temperature and grain size. It is shown that the excellent magnetocaloric properties of the Ni-Mn-In matrix are maintained with doping. The isothermal entropy change and adiabatic temperature change are reduced by only 15% in the two-phase Ni-Mn-In-Heusler alloy compared to the single-phase alloy, which is resulting from a slight increase in thermal hysteresis and the width of the transition. Due to the same grain size and transition temperature, this effect can be directly related to the precipitates. The introduction of Gd precipitates leads to a 100% improvement in mechanical strength, which is significantly lower than the improvement observed for Ni-Mn-In alloys with grain refinement and Gd precipitates. This reveals that a significant contribution to the improved mechanical stability in Gd-doped Heusler alloys is related to grain refinement., Comment: Keywords: metal matrix composites, magnetocaloric, magneto-structural phase transitions, microstructure, mechanical properties, Heusler alloy

Ni-Mn-based metamagnetic shape-memory alloys exhibit a giant thermal response to magnetic fields and uniaxial stress which can be utilized in single caloric or multicaloric cooling concepts for energy-efficient and sustainable refrigeration. However, during cyclic operation these alloys suffer from structural and functional fatigue as a result of their high intrinsic brittleness. Here, we present based on Fe-doping of Ni-Mn-In a microstructure design strategy which simultaneously improves cyclic stability and maintains the excellent magnetocaloric and elastocaloric properties. Our results reveal that precipitation of a strongly Fe-enriched and In-depleted coherent secondary gamma-phase at grain boundaries can ensure excellent mechanical stability by hindering intergranular fracture during cyclic loading. In this way, a large elastocaloric effect of -4.5 K was achieved for more than 16000 cycles without structural or functional degradation, which corresponds to an increase of the cyclic stability by more than three orders of magnitude as compared to single-phase Ni-Mn-In-(Fe). In addition, we demonstrate that the large magnetocaloric effect of single-phase Ni-Mn-In-(Fe) can be preserved in the dual-phase material when the secondary gamma-phase is exclusively formed at grain boundaries as the martensitic transformation within the Heusler matrix is barely affected. This way, an adiabatic temperature change of -3 K and an isothermal entropy change of 15 $Jkg^{-1}K^{-1}$ was obtained in 2 T for dual-phase Ni-Mn-In-Fe. We expect that this concept can be applied to other single caloric and mutlicaloric materials, therewith paving the way for solid-state caloric cooling applications.