Search

Active Pharmaceutical Ingredients (APIs) do not always exhibit processable physical properties, which makes their processing in an industrial setup very demanding. These issues often lead to poor robustness and higher cost of the drug product. The issue can be mitigated by co-processing the APIs using suitable solvent media-based techniques to streamline pharmaceutical manufacturing operations. Some of the co-processing methods are the amalgamation of API purification and granulation steps. These techniques also exhibit adequate robustness for successful adoption by the pharmaceutical industry to manufacture high quality drug products. Spherical crystallization and co-precipitation are solvent media-based co-processing approaches that enhances the micromeritic and dissolution characteristics of problematic APIs. These methods not only improve API characteristics but also enable direct compression into tablets. These methods are economical and time-saving as they have the potential for effectively circumventing the granulation step, which can be a major source of variability in the product. This review highlights the recent advancements pertaining to these techniques to aid researchers in adopting the right co-processing method. Similarly, the possibility of scaling up the production of co-processed APIs by these techniques is discussed. The continuous manufacturability by co-processing is outlined with a short note on Process Analytical Technology (PAT) applicability in monitoring and improving the process., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

Active pharmaceutical ingredients (API) with unfavorable physicochemical properties and stability present a significant challenge during their processing into final dosage forms. Cocrystallization of such APIs with suitable coformers is an efficient approach to mitigate the solubility and stability concerns. A considerable number of cocrystal-based products are currently being marketed and show an upward trend. However, to improve the API properties by cocrystallization, coformer selection plays a paramount role. Selection of suitable coformers not only improves the drug's physicochemical properties but also improves the therapeutic effectiveness and reduces side effects. Numerous coformers have been used till date to prepare pharmaceutically acceptable cocrystals. The carboxylic acid-based coformers, such as fumaric acid, oxalic acid, succinic acid, and citric acid, are the most commonly used coformers in the currently marketed cocrystal-based products. Carboxylic acid-based coformers are capable of forming the hydrogen bond and contain smaller carbon chain with the APIs. This review summarizes the role of coformers in improving the physicochemical and pharmaceutical properties of APIs, and deeply explains the utility of afore-mentioned coformers in API cocrystal formation. The review concludes with a brief discussion on the patentability and regulatory issues related to pharmaceutical cocrystals.

Stability is an essential quality attribute of any pharmaceutical formulation. Poor stability can change the color and physical appearance of a drug, directly impacting the patient's perception. Unstable drug products may also face loss of active pharmaceutical ingredients (APIs) and degradation, making the medicine ineffective and toxic. Moisture content is known to be the leading cause of the degradation of nearly 50% of medicinal products, leading to impurities in solid dose formulations. The polarity of the atoms in an API and the surface chemistry of API particles majorly influence the affinity towards water molecules. Moisture induces chemical reactions, including free water that has also been identified as an important factor in determining drug product stability. Among the various approaches, crystal engineering and specifically co-crystals, have a proven ability to increase the stability of moisture-sensitive APIs. Other approaches, such as changing the salt form, can lead to solubility issues, thus making the co-crystal approach more suited to enhancing hygroscopic stability. There are many reported studies where co-crystals have exhibited reduced hygroscopicity compared to pure API, thereby improving the product's stability. In this review, the authors focus on recent updates and trends in these studies related to improving the hygroscopic stability of compounds, discuss the reasons behind the enhanced stability, and briefly discuss the screening of co-formers for moisture-sensitive drugs.

The present study was designed to determine the applicability of a newly derived dimensionless number precipitation parameter, "supersaturation holding capacity (SHC)" in development of amorphous solid dispersion (ASD) of a rapidly crystallizing drug, nisoldipine. Also, ASD preparation from lab scale formulation technique to scalable spray drying technique followed by oral bioavailability study was demonstrated. Solution state screening of polymers was performed by determining nucleation induction time (tin) and SHC. With screened polymers, lab scale ASDs of nisoldipine were prepared using rotary evaporation (solvent evaporation) method, and the optimized stable ASDs were scaled up by spray drying. The ASDs were characterized by DSC, PXRD, and FTIR for amorphous nature and evaluated for apparent solubility, dissolution, and solid-state stability improvement. The spray dried ASDs were additionally evaluated for micrometric properties and oral bioavailability study.PVP grades demonstrated superior crystal growth inhibition properties (with 2-4-fold enhancements in SHC). ASDs prepared by both lab scale and scale-up technique using PVP stabilized the amorphous nisoldipine via antiplasticization effect that maintained the stability under accelerated stability conditions (40 °C/75% RH) for 6 months. Additionally, FTIR study confirmed the role of intermolecular interactions in amorphous state stabilization of PVP-based solid dispersions. PVP-based spray dried ASDs improved the apparent solubility 4-fold for PVP K17 and more than 3-fold for remaining spray dried ASDs. The enhanced solubility was translated to improved dissolution of the drug when compared with crystalline and amorphous form complementing the outcome of the solution state study. The spray dried ASD showed 2.3 and > 3-fold the improvement in Cmax and AUC (0-24 h) respectively when compared with crystalline nisoldipine during oral bioavailability study which highlights the significance of SHC parameter of polymers. The spray dried ASD has shown improved micromeritics properties then crystalline nisoldipine in terms of flow behavior.This unique study provides a rational strategy for selection of appropriate polymer in development of ASDs that can tackle both precipitation during dissolution and amorphous state stabilization in solid state and also considers the SHC in scale-up study. Graphical abstract.

Supersaturated drug delivery systems are commonly used to address the problems of poor aqueous solubility posed by most of the active pharmaceutical ingredients (APIs). However, the supersaturated systems are highly unstable due to their high free energy levels and demonstrate a tendency to precipitate. Understanding the crystallization tendency based on the mechanisms of crystallization, that is nucleation and crystal growth, is imperative to design formulation strategies and select appropriate precipitation inhibitors. This study aims to provide a classification system, based on both the nucleation and crystal growth tendency in the solution state of 60 APIs and nutraceuticals (in absence of polymer) from their desupersaturation profiles monitored by UV-Visible spectroscopy. The APIs and nutraceuticals are divided into four classes based on their induction time (t ind ) and crystal growth rate as fast nucleators-fast crystal growth (class I), fast nucleators-slow crystal growth (class II), slow nucleators-fast crystal growth (class III) and slow nucleators-slow crystal growth (class IV). Most of the molecules fall in the class I and class IV. An easy-to-use protocol for nucleation and crystal growth studies has been optimized. This protocol will find application to assess the crystallization tendency of the molecules in the preliminary screening stages, enabling appropriate formulation strategies to inhibit crystallization.

Co amorphous systems are supersaturated drug delivery systems which offer a basic platform for delivery of multicomponent adducts (combination of more than one active pharmaceutical ingredient (API)) and/or as a fixed dose combination therapy, in addition to their potential to improve the apparent solubility, dissolution rate and ultimately bioavailability of poorly water soluble APIs. In the present work, a new drug-drug co amorphous system namely valsartan-nifedipine was prepared by quench cooling technique. Prepared co amorphous system was characterized for its solid state behavior with the help of Fourier Transform Infrared spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Powder X Ray Diffractometry (PXRD). The optimized co amorphous system was stable for 1 month when exposed to accelerated stability condition (40 ± 2 °C and 75 ± 5% RH). The improved stability of amorphous nifedipine in co amorphous system was attributed to improved miscibility and intra and intermolecular non-covalent interactions mainly due to presence of hydrogen bonding between valsartan and nifedipine which was studied by FTIR analysis. Co amorphous systems were evaluated by mainly in vitro dissolution and in vivo benefit. In vitro dissolution study showed nearly 5.66 folds and 1.61 folds improvement which was translated to 3.63 and 2.19 times enhancement in vivo C max for nifedipine and valsartan respectively., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Niclosamide, an anthelmintic drug recently repurposed for its activity against cancer, crystallizes into three solvated forms, two monohydrates (NHa, NHb) and one anhydrous (NAn) form. NAn is sensitive to pseudopolymorphic transformations that affect its dissolution and consequently, its bioavailability. NAn exhibits a polymorphic conversion to metastable monohydrate (NHa) form during high-energy milling in presence of poorly soluble solvents like water. It is hence very important to quantify polymorphic conversion from NAn to NHa, as water is a commonly used solvent during various processing like ball milling and wet granulation. This main objective of the study was to examine the feasibility of Raman, NIR and MIR spectroscopic techniques for identification and quantification of polymorphic forms of niclosamide in binary mixtures and multicomponent mixtures. Calibration models were developed and validated by vibrational spectroscopic techniques in binary mixtures of NAn and NHa and in multicomponent mixtures by chemometric techniques. These techniques were further used to identify and quantify NHa during ball milling, granulation and in presence of other polymorphic forms of niclosamide. Identification and quantification of pseudopolymorphs in binary and multicomponent mixtures with an acceptable recovery of 100.13-102.99% for Raman and 100.07-101.28% for NIR with low % RSD of 2.38-3.12 for both techniques were obtained. The % NHa determined during ball milling and granulation was similar by NIR and Raman. Raman spectroscopy however showed a greater advantage over other techniques in determining the NHa in presence of NHb due to significant difference in the spectral region of hydrates, when compared to NIR and MIR., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Niclosamide, previously used as an anthelmintic drug is currently being repurposed for its anticancer activity. Niclosamide is a brick like biopharmaceutical classification system (BCS) class II drug with poor aqueous solubility and dissolution consequently leading to low bioavailability. By considering the physicochemical properties and geometry of niclosamide, inclusion complex with cyclodextrin was prepared by freeze drying method and characterized using FT-IR, DSC, PXRD, and 1 HNMR. In silico molecular modeling study was performed to study the possible interactions between niclosamide and cyclodextrin. The anticancer activity of niclosamide formulation was evaluated through in vitro cell cytotoxicity study using various cancer cell lines. The potential of niclosamide complex for improvement of the bioavailability was evaluated in male BALB/c mice. In vitro cytotoxicity studies indicated significantly higher cytotoxicity at lower concentrations and the pharmacokinetic studies showed significant improvement in C max and T max of niclosamide from cyclodextrin complex in comparison to pure niclosamide alone., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Cellulose derivatives have gained immense popularity as stabilizers for amorphous solid dispersion owing to their diverse physicochemical properties. More than 20 amorphous solid dispersion-based products that have been approved for marketing consist of cellulose derivatives as stabilizers, thus highlighting their importance in generation of amorphous solid dispersions. These polymers offer numerous advantages like drug solubilization, crystallization inhibition and improvement in release patterns of drugs. Exploring their potential and exploiting their chemistry and pH responsive behaviour have led to the synthesis of new derivatives that has broadened the scope of the use of cellulose derivatives in amorphous formulation development. The present review aims to provide an overview of different mechanisms by which these cellulose derivatives inhibit the crystallization of drugs in the solid state and from supersaturated solution. A summary of different categories of cellulose derivatives along with the newly explored polymers has been provided. A special segment on strengths, weaknesses, opportunities, and threats (SWOT) analysis and critical quality attributes (CQAs) which affect the performance of the cellulose based amorphous solid dispersion will aid the researchers in identifying the major challenges in the development of cellulose based solid dispersion and serve as a guide for further formulation development., (© 2018 Shenyang Pharmaceutical University. Published by Elsevier B.V.)

The last decade has witnessed extensive growth in the field of co-crystallization for mitigating the solubility and dissolution-related issues of poorly soluble drugs. This is largely because co-crystals can modify the physicochemical properties of drugs without any covalent modification in the drug molecules. The US Food and Drug Administration (FDA) now considers drug products that are designed to contain a new co-crystal, analogous to new polymorph of the active pharmaceutical ingredient (API). This positive change in regulatory perspective coupled with successful commercialization of valsartan-sacubitril co-crystal (Entresto, Novartis) has now brought co-crystals into focus, in both industries as well as academia. Co-crystal prediction, screening, and synthesis have been reported in literature; however, co-crystal production at a larger scale needs further investigations. With this aim, the article describes various continuous methods for co-crystal production, along with in-line monitoring during co-crystal production, emphasizing on process analytical technology (PAT). In addition, the scale-up issues of continuous and batch co-crystallization and other suitable techniques for pharmaceutical scale up are detailed. Quality control aspects and regulatory viewpoint crucial for commercial success are elaborated in the future perspective.

Precipitation inhibitory potential of polymers screened from precipitation study may be altered once it is formulated in amorphous solid dispersions (ASDs)., Objective: Present study was embarked with an objective to determine whether the polymers retain the same inhibitory potential after formulating them into ASDs., Methods: Screening of polymers was based on a new dimensionless parameter 'Supersaturation Holding Capacity (SHC)' calculated from the precipitation study. Nifedipine ASDs were formulated using HPMC E3 and HPMC E50 (high SHC values), and HPMC K100M, PVP K25, and HPC M (low to moderate SHC values). Generated ASDs were characterized by DSC, FTIR, and PXRD and evaluated for stability under accelerated conditions (40˚C and 75% RH) for 6 months., Results: Thermal analysis of the ASDs and theoretical prediction of the glass transition temperature (T g ) suggested a linear dependency of T g on the content of HPMC E3 and HPMC E50. Under accelerated stability conditions, all ASDs of nifedipine with HPMC E3 and HPMC E50 (except ASDs with 70% drug load) were stable, which could be attributed to the molecular level dispersion of the drug in these polymers. SHC parameter calculated from the apparent solubility profile gave following rank order HPMC E50 (3.4) > HPMC E3 (3.2) > HPMC K100M (1.29) > PVP K25 (1.09) > HPC M (0.99). SHC calculated from the apparent solubility profile of ASDs demonstrated good agreement between the solution state and solid state screening of the polymers for precipitation inhibition. During dissolution study, nearly four-fold enhancement has been observed with ASDs comprising HPMC E3 and HPMC E50., Conclusions: The outcome of the study concluded that SHC can be a promising parameter in the screening of polymers for the development of the ASDs.

Rufinamide (R) is a triazole derivative approved for the management of partial seizures and seizures associated with Lennox-Gastaut Syndrome, in November 2007. Crystal structure, solid state characterization, drug-excipient compatibility and solubility play a pivotal role in formulation development. This work deals with the crystal structure elucidation of R by single crystal X-ray diffraction and solid state characterization by thermal, spectroscopic and crystallographic techniques. Drug- excipient compatibility was assessed by differential scanning calorimetry (DSC). New RP-HPLC method for quantification of R was developed with improved retention time. Solubility and dissolution of drug in different media was determined. Additionally, the flow behavior of the drug was evaluated by measuring Carr's index and Hausner's ratio, while the compressibility behavior was studied using Well's protocol. R crystallized from dimethylformamide (R-DMF) was utilized for single crystal analysis. The drug crystallized in triclinic crystal system with P-1 space group. Asymmetric unit cell consists of two molecules of R held by intermolecular hydrogen bond (connected by NH⋯O, which forms the catemeric chain). Analytical outcomes from DSC, thermogravimetric analysis (TGA) and powder X-ray diffraction (PXRD) revealed that the drug was present in pure crystalline form and was devoid of any polymorphic or pseudopolymorphic impurities. Influence of pH on the solubility and dissolution of R-DMF was found to be insignificant. The drug exhibited poor aqueous solubility, which was improved nearly 4.6 fold with the addition of 2% sodium lauryl sulphate (SLS). The drug exhibits poor flow and elastic compression nature. Excipients such as poly ethylene glycol (PEG) 8000, SLS, lactose monohydrate, starch and Hydroxypropyl methylcellulose (HPMC) E15 were incompatible with R-DMF as identified by thermal analysis. It is envisaged that these information regarding solid state properties of R-DMF would aid in identifying a logical path for formulation development., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Physical characterization of solid form of drug is of paramount importance as its biopharmaceutical properties and/or its processing behavior may be altered. Early identification and monitoring of solid state transformation is a critical requirement for pharmaceutical product development. In combination with chemometrics, a non destructive and non invasive technique like NIR is a powerful tool for solid state characterization. Main focus of this review is application of NIR for qualitative and quantitative analysis of solid forms of drugs and excipients. In addition, this review also sheds light on recent advancement in NIR, such as NIR chemical imaging and NIR based hyphenated techniques., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

The development of solid dosage forms and manufacturing processes are governed by complex physical properties of the powder and the type of pharmaceutical unit operation the manufacturing processes employs. Suitable powder flow properties and compactability are crucial bulk level properties for tablet manufacturing by direct compression. It is also generally agreed that small scale powder flow measurements can be useful to predict large scale production failure. In this study, predictive multilinear regression models were effectively developed from critical material properties to estimate static powder flow parameters from particle size distribution data for a single component and for binary systems. A multilinear regression model, which was successfully developed for ibuprofen, also efficiently predicted the powder flow properties for a range of batches of two other active pharmaceutical ingredients processed by the same manufacturing route. The particle size distribution also affected the compactability of ibuprofen, and the scope of this work will be extended to the development of predictive multivariate models for compactability, in a similar manner to the approach successfully applied to flow properties., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Recent reports on the anticancer potential of niclosamide have opened new avenues for anticancer treatment. Niclosamide belongs to the BCS class II, which is indicative of poor solubility and dissolution rate limited absorption. The aim of this study was to improve the dissolution rate of the drug by mesoporous drug delivery system. Porous silica grades (ordered and nonordered) with different pore size, pore volume and surface area were used in the study. The drug was loaded on silica carriers by the solvent evaporation method and characterized by BET surface area analysis, SEM, P-XRD, DSC, and FTIR. A discriminatory dissolution medium was developed for performing the in vitro dissolution of niclosamide. In comparison to the plain drug, all silica based formulations showed improvement in the dissolution rate. Maximum enhancement in the dissolution rate was observed in 1:2 drug:carrier loading ratio when compared to 1:1 ratio. Different properties of mesoporous silica like structural geometry, pore size and microenvironment pH demonstrated a significant impact on drug release from the formulations. Cytotoxicity of the optimized mesoporous formulations of niclosamide was explored in HCT-116, HCT-15, NCI, MDA-MB-231 and A549 cancer cell lines. Nearly 3 fold and 2 fold increase in% cytotoxicity of drug loaded Syloid-244 and Sylysia 350 at 1:2 ratio respectively, were observed when compared to the plain drug., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Combinational therapy has become increasingly popular in recent times due to various advantages like greater therapeutic effect, reduced number of prescriptions, lower administrative costs, and an increase in patient compliance. Drug-drug multicomponent adducts could help in combination of drugs at supramolecular level. Two drug-drug eutectics of etodolac with paracetamol (EP) and etodolac with propranolol hydrochloride (EPHC) were successfully designed and synthesized for the first time. These eutectics significantly improved dissolution and material properties. A 6 to 9 fold enhancement in % dissolution efficiency was found at 1min suggesting the fast dissolving capabilities of the eutectic mixtures when compared to plain drug. In addition, eutectic mixtures have shown improved hardness compared to plain drugs. EP and EPHC have shown around 5 fold and 3 fold improvements in hardness respectively at 10MPa when compared to plain etodolac. Cell culture studies have shown improved effects of EP. Western blotting analysis revealed that the said combination successfully reduced various inflammatory mediators like TNF-α, COX-2 and IL-6. Whereas, the eutectic combination EPHC has shown enhanced cytotoxic effects with synergistic combination index and favorable dose reduction index. The generated multi-component systems EP and EPHC with fast dissolving capabilities, improved hardness at lower pressures and synergistic effects represent prospective combinations for effective treatment of osteoarthritis and cancer chemotherapy respectively., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Objective: Olmesartan medoxomil (OLM) is an antihypertensive drug with low oral bioavailability (28%) resulting from poor aqueous solubility, presystemic metabolism and P-glycoprotein mediated efflux. The present investigation studies the role of lipid nanocarriers in enhancing the OLM bioavailability through oral delivery., Materials and Methods: Solid lipid nanoparticles (SLN) were prepared by solvent emulsion-evaporation method. Statistical tools like regression analysis and Pareto charts were used to detect the important factors effecting the formulations. Formulation and process parameters were then optimized using mean effect plot and contour plots. The formulations were characterized for particle size, size distribution, surface charge, percentage of drug entrapped in nanoparticles, drug-excipients interactions, powder X-ray diffraction analysis and drug release in vitro., Results and Discussion: The optimized formulation comprised glyceryl monostearate, soya phosphatidylcholine and Tween 80 as lipid, co-emulsifier and surfactant, respectively, with an average particle size of 100 nm, PDI 0.291, zeta potential of -23.4 mV and 78% entrapment efficiency. Pharmacokinetic evaluation in male Sprague Dawley rats revealed 2.32-fold enhancement in relative bioavailability of drug from SLN when compared to that of OLM plain drug on oral administration., Conclusion: In conclusion, SLN show promising approaches as a vehicle for oral delivery of drugs like OLM.

Solubility is one of the major problems associated with most of the new chemical entities that can be reasonably addressed by drug amorphization. However, being a high-energy form, it usually tends to re-crystallize, necessitating new formulation strategies to stabilize amorphous drugs. Polymeric amorphous solid dispersion (PASD) is one of the widely investigated strategies to stabilize amorphous drug, with major limitations like limited polymer solubility and hygroscopicity. Co amorphous system (CAM), a new entrant in amorphous arena is a promising alternative to PASD. CAMs are multi component single phase amorphous solid systems made up of two or more small molecules that may be a combination of drugs or drug and excipients. Excipients explored for CAM preparation include amino acids, carboxylic acids, nicotinamide and saccharine. Advantages offered by CAM include improved aqueous solubility and physical stability of amorphous drug, with a potential to improve therapeutic efficacy. This review attempts to address different aspects in the development of CAM as drug products. Criterion for co-former selection, various methods involved in CAM preparation, characterization tools, stability, scale up and regulatory requirements for the CAM product development are discussed., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Curcumin and emu oil derived from emu bird (Dromaius novaehollandiae) has shown promising results against inflammation. However, the delivery of curcumin is hindered due to low solubility and poor permeation. In addition, till date the role of emu oil in drug delivery has not been explored systemically. Hence, the current investigation was designed to evaluate the anti-inflammatory potential of curcumin in combination with emu oil from a nanoemulgel formulation in experimental inflammation and arthritic in vivo models. Nanoemulsion was prepared using emu oil, Cremophor RH 40 and Labrafil M2125CS as oil phase, surfactant and co-surfactant. The optimized curcumin loaded nanoemulsion with emu oil was incorporated into carbopol gel for convenient application by topical route. The anti-inflammatory efficacy was evaluated in carrageenan induced paw edema and FCA induced arthritic rat model in terms of paw swelling, weight indices of the liver and spleen, pathological changes in nuclear factor kappa B, iNOS, COX-2 expression and inflammatory cytokines. Arthritic scoring, paw volume, biochemical, molecular, radiological and histological examinations indicated significant improvement in anti-inflammatory activity with formulations containing curcumin in combination with emu oil compared to pure curcumin. These encouraging results demonstrate the potential of formulations containing curcumin and emu oil combination in rheumatoid arthritis., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The objective of the study was to design and optimize a disintegrating pellet formulation of microcrystalline cellulose by non-aqueous extrusion process for a water sensitive drug using various statistical tools. Aspirin was used as a model drug. Disintegrating matrix pellets of aspirin using propylene glycol as a non-aqueous granulation liquid and croscarmellose as a disintegrant was developed. Plackett-Burman design was initially conducted to screen and identify the significant factors. Final optimization of formula was performed by response surface methodology using a central composite design. The critical attributes of the pellet dosage forms (dependent variables); disintegration time, sphericity and yield were predicted with adequate accuracy based on the regression model. Pareto charts and contour charts were studied to understand the influence of factors and predict the responses. A design space was constructed to meet the desirable targets of the responses in terms of disintegration time <5min, maximum yield, sphericity >0.95 and friability <1.7%. The optimized matrix pellets were enteric coated using Eudragit L 100. The drug release from the enteric coated pellets after 30min in the basic media was ~93% when compared to ~77% from the marketed pellets. The delayed release pellets stored at 25°C/60% RH were stable for a period of 10mo. In conclusion, it can be stated that the developed process for disintegrating pellets using non-aqueous granulating agents can be used as an alternative technique for various water sensitive drugs, circumventing the application of volatile organic solvents in conventional drug layering on inert cores. The scope of this study can be further extended to hydrophobic drugs, which may benefit from the rapid disintegration property and the use of various hydrophilic excipients used in the optimized pellet formulation to enhance dissolution and in turn improve bioavailability., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Co-crystals have garnered the interest of the pharmaceutical industry with the introduction of regulatory guidelines by the US Food and Drug Administration (FDA) as a result of expanded patent portfolios. The Phase II clinical success of tramadol and celecoxib co-crystal for the treatment of acute pain followed by a recent reflection paper published by the European Medicines Agency (EMA) have further boosted the development of drug-drug co-crystals. Here, we shed light on the developments of drug-drug co-crystals and highlight future perspectives for exploring new therapeutic hybrids deploying drug-drug, drug-nutraceuticals and drug-inorganic salt combinations with improved pharmaceutical and biopharmaceutical performance., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Multi-drug therapy is described as a simultaneous or sequential administration of two or more drugs with similar or different mechanisms of action and is recognized as a more efficient solution to combat successfully, various ailments. Polymeric micelles (PMs) are self-assemblies of block copolymers providing numerous opportunities for drug delivery. To date various micellar formulations were studied for delivery of drugs, nutraceuticals and genes; a few of them are in clinical trials. It was observed that there is an immense need for the development of PMs embedding multiple therapeutic agents to combat various ailments, including cancers, HIV/AIDS, malaria, multiple sclerosis, hypertension, infectious diseases, cardiovascular and metabolic diseases, immune disorders and many psychiatric disorders. Several combinations of drug-drug, drug-nutraceutical, drug-gene and drug-siRNA explored to date are detailed in this review, with a special emphasis on their potential and future perspectives. A summary of various preparation methods, characterization techniques and applications of PMs are also provided. This review presents a holistic approach on multi-drug delivery using micellar carriers and emphasizes on the development of therapeutic hybrids embedding novel combinations for safer and effective therapy., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Improvement in dissolution of the drugs having poor solubility is a challenge in pharmaceutical industry. Micronization is one technique, employed for dissolution enhancement of cilostazol, a BCS class II drug. However, the obtained micronized drug possesses poor flowability. The aim of this study was to improve the dissolution rate and flow properties of cilostazol by crystal engineering, using habit modification method and compare with micronized cilostazol bulk drug. Simulation studies were performed to predict the effect of solvents on cilostazol crystal habit. Cilostazol crystals with different habits were prepared by solvent:anti-solvent crystallization technique. SEM, FTIR, DSC, TGA and PXRD were used for solid state characterization. The results revealed that cilostazol re-crystallized from methanol-hexane system were hexagonal and ethanol-hexane system gave rods. Cilostazol engineered habits showed increased dissolution rate than unprocessed drug but similar dissolution rate when compared to micronized cilostazol. Micronized cilostazol showed a dissolution efficiency of 75.58% where as cilostazol recrystallized from methanol-hexane and ethanol-hexane systems resulted in a dissolution efficiency of 72.63% and 68.63%, respectively. In addition, crystal engineering resulted in improved flow properties of re-crystallized habits when compared to micronized form of the drug. In conclusion, crystal engineering by habit modification show potential for dissolution enhancement with an added advantage of improved flow properties over micronization technique, for poorly soluble drugs like cilostazol., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The main objective of the study was to alter the dissolution profile of a practically insoluble Biopharmaceutics Classification System class II drug, aceclofenac, by formulating into lipid semisolid matrix (SSM) formulations using liquid filling technology in hard gelatin capsules, for both immediate and sustained release. SSM formulations of aceclofenac were prepared by melt fusion technique, using Gelucires (44/14, 50/13, 33/01 and 43/01), polyethylene glycols (4000 and 6000) and Poloxamer 188 at different levels. Role of additives like docusate sodium, Tween 80, Aerosil 200 and polyvinylpyrrolidone K-30 in enhancement of drug release was investigated. The optimized immediate and sustained SSM capsules were characterized in terms of assay, in vitro drug release, moisture uptake and differential scanning calorimetry. More than 80% of the drug was released within 15 min in various dissolution media studied, from Gelucire 44/14-based immediate release formulations. Incorporation of docusate sodium and Tween 80 provided further enhancement in drug dissolution when compared to plain drug and marketed tablet. SSM formulations based on Gelucire blends of 50/13 and 43/01 and 44/14 and 43/01 sustained the release of the drug for a period of 24 h following zero-order kinetics. The in vivo study of the optimized immediate release and sustained release formulations revealed significant enhancement in anti inflammatory activity (p < 0.01) in rats. From these findings, liquid fill technique in hard gelatin capsules using Gelucire and their blends might be an efficacious approach for designing immediate or sustained drug release profiles for poorly soluble drugs like aceclofenac.

The objective of the present study was to improve solubility, dissolution rate and therapeutic efficacy of a BCS Class II drug, glibenclamide by using oral self nano emulsifying powder. The powder was prepared by adsorbing the mixture of oil, surfactant and co-surfactant onto a carrier with large surface area; Aerosil 200. The ratios of oil and Smix (surfactant/co-surfactant mixture) required to produce an emulsion was optimized based on percentage transmittance studies and particle size determinations. The optimized formulation was subjected to in vitro dissolution study and in vivo therapeutic efficacy in rabbits by monitoring blood glucose levels. Scanning electron microscopy, differential scanning calorimetry and X-ray powder diffraction studies revealed that the drug was present in amorphous form in the final formulation. The in vivo study in rabbits indicated the improved therapeutic efficacy of glibenclamide in self-nanoemulsifying powder compared to plain drug.

Context: The physicochemical properties of drugs such as partition coefficient play a major role in the development of lipid-based drug delivery systems. The major obstacle lies in encapsulation of a drug with low partition coefficient into these systems., Objective: The objective of this study was to design and optimize a novel lipid-based delivery system with higher loading, improved pharmacokinetics consequently enhancing the oral bioavailability of drugs with low partition coefficient like valsartan., Materials and Methods: The optimized formulation consists of Capryol 90, Cremophor RH 40, and Transcutol HP. Pseudo ternary phase diagrams were used to optimize the components and their concentrations in the formulation. Dissolution studies of the selected formulations were compared with plain drug and marketed product at three pH conditions (pH 1.2, 4.5 and 6.8). Pharmacokinetic parameters of optimized formulations were determined in Wistar rats and compared with that of plain drug., Results and Discussion: The optimized formulation with a mean particle size of 50 nm showed significant improvement (p < 0.05) in dissolution rate with pH independence compared to plain drug and marketed product. The in vivo studies in Wistar rats revealed about 2.30- and 1.68-fold increase in the oral bioavailability and Cmax of valsartan from lipid-based formulation compared to plain drug., Conclusion: The engineered formulation strategy by type IV lipid-based formulations can be successfully exploited to improve the dissolution rate and oral deliverability of drugs like valsartan.

The objective of this study was to improve the dissolution and subsequently the therapeutic efficacy of poorly water soluble BCS class-II drugs meloxicam and tenoxicam, by lipid semi solid matrix (SSM) systems filled in hard gelatin capsules by liquid fill technology. The present research involved preparation of SSM formulations using Gelucire 44/14 as a carrier due to its self emulsifying, wetting and hydrophilic properties. The SSM capsules were characterized by assay, in vitro dissolution studies, moisture uptake, FTIR and DSC. The optimized formulations were also evaluated for their in vivo anti inflammatory activity in rat model. Six to ten fold enhancement in vitro drug release, in both acidic and basic media, was obtained with formulations containing drug to carrier in 1:6 ratio. The absence of drug peak in DSC scans indicated complete dissolution of the drug in carrier, while IR revealed no chemical interaction of pure drug and Gelucire 44/14. The optimized SSM formulations of meloxicam and tenoxicam showed a rapid decrease in paw edema with a significant increase in anti-inflammatory activity. The SSM formulations were successful in providing rapid release of drugs with improved dissolution and in vivo anti-inflammatory activity by liquid fill technology in hard gelatin capsules.

This study aims to evaluate the impact of surface area of silica particles on in vitro release of poorly soluble drug aceclofenac and their in vivo performances. Mesoporous silicas of different surface area and porosity were synthesized and characterized. Aceclofenac loaded silicas were prepared by solvent evaporation technique and characterized for surface area, pore size, DSC, FTIR and p-XRD. The dissolution efficiency (DE) of the mesoporous and nonporous silica was ∼2 times more than that of plain drug and marketed tablets in acidic discriminating media. A significant enhancement of 189% and 164% in oral bioavailability (AUC0-8) was observed for optimized aceclofenac loaded mesoporous formulation (MS11/72) and nonporous silica (NP), respectively, when compared to plain aceclofenac in male Wistar rats. However, no correlation could be established between the enhancements in their oral bioavailability and their corresponding surface area. The surface area of MS11/72 was 5 times more (∼1011 m(2)/g) when compared to NP (∼200 m(2)/g) and the enhancement in the oral bioavailability was only 1.15 times. This could be due to the limiting value of effective surface area of the drug available for in vitro dissolution beyond which, any further increase in surface area fails to improve the release rate or its bioavailability., (Copyright © 2013 Elsevier B.V. All rights reserved.)