Search

The growing interest in human-grade total body positron emission tomography (PET) systems has also application in small animal research. Due to the existing limitations in human-based studies involving drug development and novel treatment monitoring, animal-based research became a necessary step for testing and protocol preparation. In this simulation-based study two unconventional, cost-effective small animal total body PET scanners (for mouse and rat studies) have been investigated in order to inspect their feasibility for preclinical research. They were designed with the novel technology explored by the Jagiellonian-PET (J-PET) Collaboration. Two main PET characteristics: sensitivity and spatial resolution were mainly inspected to evaluate their performance. Moreover, the impact of the scintillator dimension and time-of-flight on the latter parameter was examined in order to design the most efficient tomographs. The presented results show that for mouse TB J-PET the achievable system sensitivity is equal to 2.35% and volumetric spatial resolution to 9.46 +- 0.54 mm3, while for rat TB J-PET they are equal to 2.6% and 14.11 +- 0.80 mm3, respectively. Furthermore, it was shown that the designed tomographs are almost parallax-free systems, hence, they resolve the problem of the acceptance criterion tradeoff between enhancing spatial resolution and reducing sensitivity.

Plastic scintillator strips are considered as one of the promising solutions for the cost-effective construction of total-body positron emission tomography, (PET) system. The purpose of the performed measurements is to compare the transparency of long plastic scintillators with dimensions 6 mm x 24 mm x 1000 mm and with all surfaces polished. Six different types of commercial, general purpose, blue-emitting plastic scintillators with low attenuation of visible light were tested, namely: polyvinyl toluene-based BC-408, EJ-200, RP-408, and polystyrene-based Epic, SP32 and UPS-923A. For determination of the best type of plastic scintillator for totalbody Jagiellonian positron emission tomograph (TB-J-PET) construction, emission and transmission spectra, and technical attenuation length (TAL) of blue light-emitting by the scintillators were measured and compared. The TAL values were determined with the use of UV lamp as excitation source, and photodiode as light detector. Emission spectra of investigated scintillators have maxima in the range from 420 nm to 429 nm. The BC-408 and EJ-200 have the highest transmittance values of about 90% at the maximum emission wavelength measured through a 6 mm thick scintillator strip and the highest technical attenuation length reaching about 2000 mm, allowing assembly of long detection modules for time-of-flight (TOF) J-PET scanners. Influence of the 6 mm x 6 mm, 12 mm x 6 mm, 24 mm x 6 mm cross-sections of the 1000 mm long EJ-200 plastic scintillator on the TAL and signal intensity was measured. The highest TAL value was determined for samples with 24 mm x 6 mm cross-section., Comment: 10 pages, 5 figures

In the state-of-the-art Positron Emission Tomography (PET), information about the polarization of annihilation photons is not available. Current PET systems track molecules labeled with positron-emitting radioisotopes by detecting the propagation direction of two photons from positron-electron annihilation. However, annihilation photons carry more information than just the site where they originated. Here we present a novel J-PET scanner built from plastic scintillators, in which annihilation photons interact predominantly via the Compton effect, providing information about photon polarization in addition to information on photon direction of propagation. Theoretically, photons from the decay of positronium in a vacuum are maximally entangled in polarization. However, in matter, when the positron from positronium annihilates with the electron bound to the atom, the question arises whether the photons from such annihilation are maximally entangled. In this work, we determine the distribution of the relative angle between polarization orientations of two photons from positron-electron annihilation in a porous polymer. Contrary to prior results for positron annihilation in aluminum and copper, where the strength of observed correlations is as expected for maximally entangled photons, our results show a significant deviation. We demonstrate that in porous polymer, photon polarization correlation is weaker than for maximally entangled photons but stronger than for separable photons. The data indicate that more than 40% of annihilations in Amberlite resin lead to a non-maximally entangled state. Our result indicates the degree of correlation depends on the annihilation mechanism and the molecular arrangement. We anticipate that the introduced Compton interaction-based PET system opens a promising perspective for exploring polarization correlations in PET as a novel diagnostic indicator.

The primary goal of the AEgIS experiment is to precisely measure the free fall of antihydrogen within Earth's gravitational field. To this end, a cold ~50K antihydrogen beam has to pass through two grids forming a moir\'e deflectometer before annihilating onto a position-sensitive detector, which shall determine the vertical position of the annihilation vertex relative to the grids with micrometric accuracy. Here we introduce a vertexing detector based on a modified mobile camera sensor and experimentally demonstrate that it can measure the position of antiproton annihilations with an accuracy of $0.62^{+0.40}_{-0.22}\mu m$, which represents a 35-fold improvement over the previous state-of-the-art for real-time antiproton vertexing. Importantly, these antiproton detection methods are directly applicable to antihydrogen. Moreover, the sensitivity to light of the sensor enables the in-situ calibration of the moir\'e deflectometer, significantly reducing systematic errors. This sensor emerges as a breakthrough technology for achieving the \aegis scientific goals and has been selected as the basis for the development of a large-area detector for conducting antihydrogen gravity measurements., Comment: 21 pages, 4 figures, 2 tables

The quasi-2D Shastry-Sutherland model has remained topical in the field of condensed matter physics for the last two decades, following the experimental realization of the model in the material SrCu$_2$(BO$_3$)$_2$. Since then, research into the Shastry-Sutherland system has revealed more nuanced physics than initially predicted; recent theoretical works have even predicted a quantum spin liquid phase may exist. Herein, we report on a new Shastry-Sutherland lattice material, Yb$_2$Be$_2$GeO$_7$, of the rare-earth melilite family RE$_2$Be$_2$GeO$_7$. We find, through SQUID magnetometry, powder neutron diffraction, specific heat capacity, and muon spin relaxation, that Yb$_2$Be$_2$GeO$_7$ lacks magnetic order and exhibits persistent spin dynamics to at least 17 mK. We propose the Shastry-Sutherland lattice material Yb$_2$Be$_2$GeO$_7$ as a candidate to host a quantum spin liquid ground-state., Comment: 11 pages, 7 figures, 4 tables

A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated., Comment: Prepared for submission to JINST

We investigate the magnetic properties of $S=1$ antiferromagnetic diamond lattice, Ni$X_{2}$(pyrimidine)$_{2}$ ($X$ = Cl, Br), hosting a single-ion anisotropy (SIA) orientation which alternates between neighbouring sites. Through neutron diffraction measurements of the $X$ = Cl compound, the ordered state spins are found to align collinearly along a pseudo-easy-axis, a unique direction created by the intersection of two easy planes. Similarities in the magnetization, exhibiting spin-flop transitions, and the magnetic susceptibility in the two compounds imply that the same magnetic structure and a pseudo-easy-axis is also present for $X$ = Br. We estimate the Hamiltonian parameters by combining analytical calculations and Monte-Carlo (MC) simulations of the spin-flop and saturation field. The MC simulations also reveal that the spin-flop transition occurs when the applied field is parallel to the pseudo-easy-axis. Contrary to conventional easy-axis systems, there exist field directions perpendicular to the pseudo-easy-axis for which the magnetic saturation is approached asymptotically and no symmetry-breaking phase transition is observed at finite fields., Comment: 9 pages, 8 figures

Heat and disorder are opponents of magnetism. This fact, expressed in Curie's law established more than a century ago, holds even in the highly non-equilibrium interaction of ultra-intense laser pulses with magnetic matter. In contradiction to this, here we demonstrate that optical excitation of a ferromagnet can abrogate the link between temperature and order and observe 100 femtosecond class laser pulses to drive a reduction in spin entropy, concomitant to an increase in spin polarization and magnetic moment persisting after relaxation back to local charge equilibrium. This both establishes disorder as an unexpected resource for magnetic control at ultrafast times and, by the provision of a purely electronic mechanism that does not involve reconfiguration of the crystal lattice, suggests a novel scheme for spin-based signal processing and information storage significantly faster than current methodology.

High-entropy alloy (HEA) superconductors have attracted significant attention due to their exceptional low-temperature mechanical and superconducting properties. We report the synthesis and thorough characterization of an equiatomic HEA superconductor with the composition Sc$_{0.20}$V$_{0.20}$Ti$_{0.20}$Hf$_{0.20}$Nb$_{0.20}$, crystallizing in a body-centered cubic crystal structure (Im3$\bar{m}$). Our investigation, using magnetization, transport, and heat capacity measurements, reveals the presence of weakly coupled, fully gapped superconductivity with a transition temperature of 4.17(3) K and the upper critical field exceeding the Pauli paramagnetic limit. The metallic nature, combined with a high upper critical field, positions it as a promising candidate for applications in superconducting devices., Comment: 7 pages, 5 figures

The creation and manipulation of coherence continues to capture the attention of scientists and engineers. The optical laser is a canonical example of a system that, in principle, exhibits complete coherence. Recent research has focused on the creation of coherent, laser-like states in other physical systems. The phonon laser is one example where it is possible to amplify self-sustained mechanical oscillations. A single mode phonon laser in a levitated optical tweezer has been demonstrated through appropriate balance of active feedback gain and damping. In this work, coherent control of the dynamics of an optical tweezer phonon laser is used to share coherence between its different modes of oscillation, creating a multimode phonon laser. The coupling of the modes is achieved by periodically rotating the asymmetric optical potential in the transverse focal plane of the trapping beam via trap laser polarization rotation. The presented theory and experiment demonstrate that coherence can be transferred across different modes of an optical tweezer phonon laser, and are a step toward using these systems for precision measurement and quantum information processing., Comment: \c{opyright} 2024 Optica Publishing Group. Users may use, reuse, and build upon the article, or use the article for text or data mining, so long as such uses are for non-commercial purposes and appropriate attribution is maintained. All other rights are reserved."

We present comprehensive investigations into the structural, superconducting, and topological properties of Bi$_2$PdPt. Magnetization and heat capacity measurements performed on polycrystalline Bi$_2$PdPt demonstrate a superconducting transition at $\approx$ 0.8 K. Moreover, muon spin relaxation/rotation ($\mu$SR) measurements present evidence for a time reversal symmetry preserving, isotropically gapped superconducting state in Bi$_2$PdPt. We have also performed density-functional theory (DFT) calculations on Bi$_2$PdPt alongside the more general isostructural systems, BiPd$_{x}$Pt$_{1-x}$, of which Bi$_2$PdPt and $\gamma$-BiPd are special cases for $x=0.5$ and $x=1$ respectively. We have calculated the $Z_2$ topological index from our DFT calculations for a range of substitution fractions, $x$, between $x=0$ and $x=1$ characterizing the topology of the band structure. We find a non-trivial topological state when $x>0.75$ and a trivial topological state when $x<0.75$. Therefore our results indicate that BiPd$_{x}$Pt$_{1-x}$ could be a topological superconductor for $x>0.75$., Comment: 10 pages, 7 figures