Search

The effect of an anticorrosive layer on the fatigue life of 2024-T-351-aluminium alloy has been studied in the present investigation. The fatigue tests were conducted on the aluminium alloy with and without anodizing to evaluate the fatigue life. The results indicate that the fatigue life of the anodized specimens is significantly shorter than that of untreated specimens. Further, experiments were conducted to evaluate the effect of the anodizing process parameters on the fatigue life of anodized specimens. These results show that the fatigue life of anodized aluminium alloy can be improved by controlling the anodizing process parameters such as process temperature, voltage, and time of immersion.

To study glass/epoxy fiber orientation effects on translaminar fracture toughness under Mixed mode(I/II) load using asymmetric Four Point Bend specimen. Fracture toughness values for different fiber-oriented glass/epoxy laminates under Mixed modes are compared with unidirectional glass/epoxy laminates. Specimens were fabricated using hand layup technique with (0/45)° and (0/90)° fiber oriented glass fiber. The experimental study was conducted for 6 crack positions varying from s/d=0(Mode-II) to 1(Mode-1) with an increment of 0.2 for Four Point Bend specimen. The specimens were tested under universal testing machine to obtain peak loads and further evaluate fracture toughness. The experimental test results show fracture toughness can be increased by orienting the fiber in the laminate. Fracture toughness is highly dominating for (0/90)° fiber-oriented laminates compared to 0° and (0/45)° glass/epoxy laminates. [ABSTRACT FROM AUTHOR]

Purpose - The purpose of this paper is to present the determination of critical stress intensity factor (KC) both by experimental method and three-dimensional (3D) finite element simulations. Design/methodology/approach - CT specimens of different compositions of Al6061-TiC composites (3wt%, 5wt% and 7wt% TiC) with variable crack length to width (a/W=0.3-0.6) ratios are machined from as-cast composite block. After fatigue pre-cracking the specimens to a required crack length, experimental load vs crack mouth opening displacement data are plotted to calculate the KC value. Elastic 3D finite element simulations have been conducted for CT specimens of various compositions and a/W ratios to compute KC. The experimental results indicate that the magnitude of KC depends on a/W ratios, and significantly decreases with increase in a/W ratios of the specimen. Findings - From 3D finite element simulation, the KC results at the centre of CT specimens for various Al6061-TiC composites and a/W ratios show satisfactory agreement with experimental results compared to the surface. Originality/value - The research work contained in this manuscript was conducted during 2015-2016. It is original work except where due reference is made. The authors confirm that the research in their work is original, and that all the data given in the article are real and authentic. If necessary, the paper can be recalled, and errors corrected. [ABSTRACT FROM AUTHOR]